tft lcd white screen 2.4 supplier

Winstar WF24H is a 2.4 inch diagonal full color 240x320 TFT display module. This 2.4 inch TFT LCD display is built in with ILI9341V IC; it supports 8/16-bit 8080-series Parallel MCU Interface. WF24H model is having module dimension of 42.72 x 60.26 mm and Active area size of 36.72 x 48.96 mm; it integrated ILI9341V controller on module, logic supply voltage range from 2.4V to 3.3V.

This 2.4" TFT LCD module is portrait mode, if you would like to use landscape mode please contact with us for more technical support. This 2.4" TFT Display is featured with brightness up to 500 cd/m2(typical value), it can be operating at temperatures from -20℃ to +70℃; its storage temperatures range from -30℃ to +80℃. It is very suitable for smart home applications, medical devices, portable devices, wearable devices, energy controls, telecoms and data transfers etc.

Search keyword: tft 2.4, tft 2.4", 2.4 tft lcd, 2.4" tft lcd, 2.4 inch tft lcd, tft lcd 2.4, 2.4 tft display, 2.4" tft display, 2.4 inch tft display, tft display 2.4, tft display 2.4"

This graphic display module is a 2.4" diagonal, full color TFT. Suitable for embedded applications, it is low-power, uses a white LED backlight, and has an integrated touch panel which has its connection brought out to the main TAB connector for the display.

The game will compile and work, I can see it working on the serial monitor.  The issue is the screen stay white.  I can load examples codes and the display screen works perfectly.

LTK0231T4002BL-V0 is a color active matrix thin film transistor (TFT) liquid crystal display (LCD) that uses amorphous silicon TFT as a switching device.

No changes made, powered up on the third day, and nothing but a white screen on the ILI9341? So i say, must have blew the t4 some how. Hot air removed the t4, on goes the new one and again a few runs later and i get a white screen again? Checked all my pin assignments, voltages and they are all good.

I picked up the project again today and de-soldered my SAMD51 T4 clone pcb as I need speed! The T4 would have been perfect, so tried a few code changes, got the screen running in the setup function (static text etc), but as soon as it enters the loop(), you guessed it....white screen. Its as if the t4 is too fast on spi or something, but I have changed the clock speeds down to 5mhz and yield the same results...

Orlando, Florida (May 25, 2015) – Microtips Technology, is proud to announce the launch of its Transmissive Normal White 2.4” TFT LCD display. The product adds to the bountiful selection of small-sized displays that the company manufactures and supplies. The company’s inventory of small displays are suitable for various purposes: automotive interior displays, handheld devices, consumer and industrial, and even medical applications.

The overall area of the screen measures 42.7 x 58.4 x 3.0 mm, with the active area measuring 36.72 x 48.96 mm. The 2.4 in the name refers to the DOT Matrix which is 2.4 inches. It uses an LED type backlight that works on an 80 mA supply current at 25 degrees room temperature and a 3.3 volt supply voltage.

The TFT LCD module operates at temperatures with a range of -20~70 degrees Celsius or -4~158 degrees Fahrenheit and can be stored at temperatures with a range of -30~80 degrees Celsius or -22~176 degrees Fahrenheit. The TFT LCD module has an 8/9/16/18-bit Parallel Interface with brightness clocking in at 850, contrast ratio at 500:1, and luminance at 450 candelas per square meter.

Microtips Tenchology, LLC believes that small displays like the Transmissive Normal White 2.4” TFT LCD module become more important as handheld devices, along with wearable devices, continue to grow in popularity among users. As such, the quality of the displays become crucial for whatever task the device is being used for.

In addition to manufacturing and supplying small LCD modules, the company also performs customizations, offering both resistive and capacitive touch. O-Film and MR-Film modules are also a part of its capabilities.

Microtips Technology, is one of the world’s leading manufacturers and suppliers of LCDs (Liquid Crystalline Displays). The company utilizes the latest in trends and technologies to produce a complete range of LCD types. Moreover, the company offers turnkey solutions like product development and design for customers in OEM manufacturing and design.

Sometimes something display, sometimes no. Wiring seems good, and sometimes when everything is displayed suddenly with no reason screen become white after a display modification (adding a word or rectangle ...).

ER-TFT024-3 is 240x320 dots 2.4" color tft lcd module display with ILI9341 controller and optional 4-wire resistive touch panel and capacitive touch panel,superior display quality,super wide viewing angle and easily controlled by MCU such as 8051, PIC, AVR, ARDUINO ARM and Raspberry PI.It can be used in any embedded systems,industrial device,security and hand-held equipment which requires display in high quality and colorful image.It supports 8080 8-bit,9-bit,16-bit,18-bit parallel,3-wire,4-wire serial spi interface. FPC with zif connector is easily to assemble or remove.Lanscape mode is also available.

Of course, we wouldn"t just leave you with a datasheet and a "good luck!".Here is the link for 2.4"TFT Touch Shield with Libraries, EXxamples.Schematic Diagram for Arduino Due,Mega 2560 and Uno . For 8051 microcontroller user,we prepared the detailed tutorial such as interfacing, demo code and development kit at the bottom of this page.

You may wish to have NEWHAVEN NHD-2.4-240320,our part number ER-TFT024-4 should meet this requirment that is the completely the same withNEWHAVEN NHD-2.4-240320.

ER-TFT024-4 is still not our general product ,we don"t have enough stock .You have to email ([email protected]) our sales to buy samples or orders. Besides the minimum order quantity is no less than 500pcs per order.The production lead time is 5-6 weeks.

2.4″ Inch Touch Screen TFT Display Shield adds a touch up to your Arduino project with a beautiful large touchscreen display shield with built-in microSD card connection. This TFT display is big (2.4″ diagonal) bright and colorful! 240×320 pixels with individual pixel control. It has way more resolution than a black and white 128×64 display.

Arduino LCD shield with built-in microSD card connection. This TFT display is big (2.4″ diagonal) bright (4 white-LED backlight) and colorful (18-bit 262,000 different shades)! 240×320 pixels with individual pixel control. It has way more resolution than a black and white 128×64 display.

A wide variety of black and white tft lcd options are available to you, such as original manufacturer, odm and agency.You can also choose from datasheet, black and white tft lcd,as well as from tft, ips, and standard black and white tft lcd,