petroleum jelly lcd screen free sample

Magic erasers are usually used for cleaning up messes, but could they clean up scratches? Yup. It wiped out small scratches on the phone"s screen in just a few seconds. Taylor Martin has a tutorial on how to make your own magic erasers for just around $0.10 (£0.07 or AU$0.14) each.

Wiping a screen with toothpaste (not the gel kind) supposedly works for fixing scratched screens. All it did in my tests was make the screen shinier and seemed to add small abrasion marks. I also tried toothpaste on a plastic screen protector, such as the kind that comes with OtterBox phone cases. It worked great on that! So it"s a no for screens, but a yes for plastic screen protectors.

Car waxes and headlight lens creams are supposed to be effective at removing scratches on screens, so I gave Mothers PowerPlastic 4Lights headlight cream a try. It made the scratches fade significantly, and l liked the shine it gave my screen.

A paste of two parts baking soda to one part water has been bandied about as a great screen fixer. Nope. It just made the screen really shiny. Plus, the moisture in the paste could damage your device.

According to the internet, coconut oil can solve just about any problem. Shockingly, it didn"t work well on phone scratches. Like with the petroleum jelly, it just made the phone super slippery.

I wasn"t sure about this tip. Sites say to mix the corn starch with a little water to make a paste, rub it on the screen with a soft cloth, and then wipe it off. It didn"t do anything to the scratches, but it made the screen shiny.

OK, this one freaked me out. A lot. Putting gooey, oily stuff on electronics is never a good idea, but I gave it a shot in the name of science. I dabbed a bit on as recommended, and rubbed it into the screen with a tissue. As I feared, all it did was make the test screen oily and sticky.

Why do people think it"s a good idea to rub food on their phones? Nope, rubbing a banana peel on your screen won"t help it. I tried it a couple different ways and it just left a crusty mess that is hard to remove.

Powdered cleanser like Bar Keepers Friend, Comet, Ajax and the like seem a good idea for buffing out scratches. They are slightly abrasive, so you"d think they"d polish your screen to a gleaming scratch-free shine. Well, they don"t. They can even leave new little scratches on your screen. Yah, this test didn"t go well.

TV screens seem to be proverbial honey pots for dust, dirt and finger streaks. And in order to get a truly clear picture, we need to take a pause from our marathon boxset sessions and reach for the nearest feather duster.

But with newer TV models seemingly coming out by the day, it"s no longer just a case of using what you have to hand to get your screen looking shiny once more. Today"s LED/LCD, PLASMA and OLED TVs all feature delicate screens – that while long lasting – may not be able to endure the have-a-go cleaning methods that were used on CRT glass TV screens popular from the sixties to the noughties.

Still where there"s a TV that needs TLC in the cleaning stakes, there"s a solution to match it. So why not put down your remote, roll up your sleeves and try out one of the tips on how to clean a TV screen below? We promise a streak-free shine.

While"s it"s tempting to get stuck into the job at hand straight away, there are a number of safety precautions you need to take before starting the process of cleaning your TV screen.

You can buy distilled water – water that has been purified of many impurities through a scientific process – from Amazon, eBay and a number of other online retailers for less than under £5 for a few litres. And this should be gentle enough for most screens.Pour the distilled water into a spray bottle

If you"re already a fan of filter coffee, then this tip of perfect for you. Put your coffee filters to use for something other than brewing up your favourite Columbian roast, and a reserve a few for cleaning your TV screen instead. Coffee filters are lint-free, and as a result are naturally anti-static, making them perfect for bringing your TV screen back to it"s best.Sweep a dry coffee filter over your TV screen in gentle, sweeping motions

If you"re LCD screen has a slight scratch it can be tempting to buy an lcd scratch repair kit. But a good old tub of Vaseline – or any other brand of petroleum jelly – may be able to do the job just as well.Dip a cotton bud into the petroleum jelly

If you"re TV manufacturer guidelines state that you can"t use generic cleaning solutions, or warn against it, then it may be best to use a dedicated multi-purpose screen cleaner or wipes that are suitable for all screen types. Check that these are alcohol-free and don"t contain any other harsh chemicals. Examples include the SCREEN CLEANER KIT By Pure Organics, which has garnered an average 4.5 star rating on Amazon. As an added bonus you should be able to use them on other devices such as smartphones, tablets and laptops.

However there must have been a small particle of something nasty either on the screen itself or on the cloth (I always keep the cloth stored away to prevent this exact issue!) the scratch that is left on the screen is admittedly tiny (~2mm) but it is there, it is bugging me and I would like to get it sorted if possible.

Honestly! I"ve read this in a few places now that due to the composition of petroleum jelly this can actually "fill" the scratches and more or less hide the fact that there is a scratch in the glass. Vaseline Online

If anyone has any experience with any of the above on a Retina display or any other advice I"d love to hear it. I must admit that I"m shocked at how easy it was to scratch the screen with little to no pressure being applied.

Image retention, in most cases, is temporary and fixable. It appears when an image is temporarily “stuck” on the screen even if the content changes, but reversible by taking particular measures. Burn-in on the LCD screen is a form of image retention but is permanent and virtually impossible to fix.

What is Screen Burn? Screen burn, also called screen burn-in, ghost image, or display burns are images or icons that are displayed on a screen when they should not be there. Screen burn comes on gradually and gets worse over time and is most common on OLED screens.

Those who display the same static content over long periods should consider the risk of burn-in, though (like those who watch lots of news, use the TV as a PC monitor, or play the same game with a bright static HUD). Those concerned about the risk of burn-in should go with an LCD TV for peace of mind.

It can get burn in within 2–3 weeks if a still image is displayed on the screen for too long and too often. Using high or maximum brightness greatly increases the chances of getting screen burn in.

The new Switch has a bigger, better 7-inch OLED screen. Just like the PlayStation 5 and the Xbox Series X, the Nintendo Switch OLED is a hot new game console that"s been difficult to get your hands on. Whether you"re still hunting Switch restocks or you just unboxed your own, you shouldn"t be stressed about burn-in.

Yes. If you bought the policy in either 2019 and 2020 (I didn"t check the previous years), the policy explicitly lists "screen image burn-in" under section 5 "What is covered", sub-section 5.1 "Hardware service".

Image retention, in most cases, is temporary and fixable. It appears when an image is temporarily “stuck” on the screen even if the content changes, but reversible by taking particular measures. Burn-in on the LCD screen is a form of image retention but is permanent and virtually impossible to fix.

Look at other customer reviews about the C1 as I did and from what I can gather, LG does not cover burn in. Get the BestBuy protection, which covers accidents such as a broken screen as well as oled burn in.

The easiest way to prevent burn-in from happening is to change the type of content you"re watching and not spend too long with a logo anywhere on the screen. For example, if you only watch CNN it"s possible that older OLED TVs might experience burn-in of the logo on the lower right corner.

Since its introduction, one major issue that has plagued the OLED technology is screen burn-in or image retention. An OLED TV that you"ve been using for a long time may start to retain static images displayed on the screen for hours, like channel logos, for example.

On average, LG TVs last roughly 100,000 hours if they use OLED technology. However, the number drops to about 60,000 hours if it"s an LCD TV. Other factors such as the usage and environmental elements also play a role in determining the lifespan. What is this?

To help the injured skin heal, use petroleum jelly to keep the wound moist. Petroleum jelly prevents the wound from drying out and forming a scab; wounds with scabs take longer to heal. This will also help prevent a scar from getting too large, deep or itchy.

Every few years, the standards that are associated with computer peripherals change. For example, the previous CD-Rom standards were upgraded to CD writers, then it became DVD drives and the now, the accepted standard are DVD writers.LCD monitors are the new standard in computer displays. Though they have not yet replaced CRT (cathode ray tube) monitors completely, LCD monitors are fast rising in popularity because of their extremely sleek looks, lower power consumption and more convenient footprint on a desk.

LCD monitors at this point are still quite expensive though and thus, extra care should be given to the unit so that it will maintain its pristine condition.

Probably the most important part that should be taken care of in an LCD monitor is the screen itself. The screen is not as tough as the glass tube of a CRT. If you have an LCD screen you will notice that only a clear, thick plastic separates your fingers from the actual components of the LCD. It is imperative that you take care of your LCD screen as much as possible and prevent it from being scratched.

There is a way though of repairing a scratched LCD screen though that is inexpensive and very easy. All you need is Vaseline petroleum jelly to fill the scratch on the LCD screen. This very simple remedy works because the optical density of Vaseline more closely matches the LCD face compared to air.

All you need to do is to clean the surface of the screen and then take some Vaseline and fill the scratch with it. Gently wipe off the excess Vaseline taking care not to wipe too forcefully so that you leave some inside the scratch.

Rub a small amount of a product such as Vaseline into the scratch. Let sit for 60 seconds. Next gently rub the Vaseline off of disc by using an inward to outward motion in a straight line. Remove as much of the jelly as possible. Make sure disc is clean and dry and put it into console to see if the jelly method worked. Repeat this method if necessary.

Because coffee filters are lint-free and do not scratch your LCD TV screen, they are the best tool for keeping it clean. After turning off your TV, gently wipe the dry coffee filter across the screen with a sweeping motion to remove any dust from it.

TV screens, in short, act as honey pots for dust, dirt, and finger streaks. A delicate screen is now present on LCD, LED, PLASMA, and OLED TVs. With the advances in technology over the last few decades, it is possible that they will no longer be able to tolerate the hard-to-clean methods used to create CRT glass television screens from the 1960s to the early 2000s. Vaseline, as well as other petroleum jelly brands, may be effective in this case. A scratch on your LCD screen can be a sign that you need to get an lcd scratch repair kit. If your screen is not flat, a dedicated multi-purpose screen cleaner or wipe is ideal.

It is critical to maintain your TV in good condition, but it is also critical to use the proper cleaning products in order not to damage your expensive electronics. If you’re cleaning your TV, make sure you have a soft, dry microfiber cloth or an electrostatic duster like a Swiffer or a GH Seal. A pre-moistened wipe designed specifically for electronics will remove the stubborn residue if you find a stubborn residue. If you use a baby wipe, the residue left behind on an LED TV screen can be permanently damaged. Finally, to remove dust that may have accumulated in the vents, clean the TV’s buttons and back. This will ensure that your television stays looking good and functioning properly.

If you want to clean the frame or screen of your TV in general, a soft, clean, lint-free, dry cloth is recommended. Microfiber cloths are the best. It is never a good idea to use window cleaner, soap, scouring powder, or any other solvents containing alcohol, benzene, ammonia, or paint thinner.

It is not recommended to use white vinegar to clean a TV screen, despite its ability to clean a television. It is a corrosive liquid that can scratch the delicate surface of a television screen. Damage to the anti-reflective and anti-glare coating, for example, can cause irreversible damage to the image. Caviness is another concern because vinegar can cause streaks and discolored patches on the surface. Vinegar can permanently etch the surface of the screen, resulting in a foggy, distorted image. You should avoid using vinegar while cleaning your TV screen as a result. Instead, clean the floor with a dry microfiber cloth or a soft cloth dampened with distilled water to remove dust and dirt. It is possible to remove tough stains with a few drops of mild detergent and warm water. You should always use a clean cloth after cleaning your screen, and avoid using chemicals or abrasive materials. It is critical to invest the time necessary to ensure that your TV screen is in good condition for many years to come.

If you still have streaks or stains on the microfiber cloth, wash it with distilled water and wring it out until it is almost dry. Wipe the cloth across the screen vigorously in broad motion with very little pressure until you reach the bottom of the screen.

If you want to clean your monitor, make sure you’re using a soft microfiber cloth and distilled or still water. Mineral deposits on the surface of the screen can occur in other types of water.

Cleaning fluids specifically designed for computer monitors are available on the market. The most common method for cleaning monitors is to use distilled water, which can also be combined with white vinegar to remove stubborn stains. Keep paper towels, rags, old T-shirts, and any other commonly used cleaning tools away from your home. There are gentle cleaning fluids designed specifically for monitors, but distilled water works well as well as the others. Tap water contains minerals and other substances that can damage the screen or cause streaks to appear. Water should be liberally sprayed with white vinegar to deal with the most stubborn of grime. It is critical to avoid spilling it on your laptop.

In terms of cleaning LCD screens, there are several steps you should take to ensure their safety and proper maintenance. Remove any dust from the screen with a microfiber cloth before beginning. If you have fingerprints or are experiencing smudges, spray 70% isopropyl alcohol onto a cloth, or use a pre-moistened alcohol wipe or a Clorox Disinfecting Wipe to clean non-porous surfaces, such as the screen, without bleach. If stains persist, you can gently clean the screen with distilled water and lightly dampen the cloth. To avoid wetting the screen, spray the cleaning solution on the cloth and wipe it clean of any excess liquid. Windex should only be used as a cleaner if your laptop’s screen is glass. It is never a good idea to direct-paint a computer display, as this may lead to oversaturating of the pixels or component failures if water leaks into the set’s inner workings.

It is critical to unplug your device before turning it off. Once the dust has been removed, you can start cleaning your screen with a microfiber cloth. It is safe to use 70% isopropyl alcohol, or spray it onto a cloth or a pre-moistened alcohol wipe, to clean non-porous surfaces such as screens without using bleach, and it does not harm your skin.

If your monitor becomes covered in grime, your productivity and health will suffer. There are several steps you must take to keep your LCD screens clean and happy. We’ll show you how to clean laptop screen frames without scratching or damaging them. Finally, we discover which commercial cleaning kits are well worth the money and effort you put into them. The best way to clean car windshields is with glass cleaner spray, but it will melt LCD monitors’ coatings. Pinchers and cotton swabs can be used to clean the crevices around buttons and other difficult-to-reach places. As a result, you should never use tap water to clean your home because mineral deposits may accumulate.

Ethic alcohol or rubbing alcohol are not suitable for cleaning computer monitor screens. Instead, we’ve made a fantastic DIY screen cleaner recipe using diluted vinegar that you can make at home. This recipe will also work for cleaning dirty eyeglasses if you are looking for a simple and easy way to do so. When you scratch your monitor on a regular basis, it may appear dull; however, if it scratches significantly, it may appear damaged. Using petroleum jelly to remove small scratches is an effective way to do so. If you use petroleum jelly on your scuff marks, you will be permanently discoloring them. When you’re finished with your monitors, they’ll look great in showrooms.

A gentle abrasive in baking soda helps to remove small scratches without causing too much damage to the surrounding surface. Before using this fix on large areas, it is critical to test it on a small area. Our guide will walk you through the most effective methods for cleaning your computer monitor’s screen to make it look brand new once more.

You should never use Windex to clean a monitor. The material is made of glass, but it can be harsh for delicate computer screens. Furthermore, eyeglass cleaners should be avoided because they will not disinfect the screen. When cleaning the screen, use a dry cloth that will remove particles and germs. It is also important to note that window cleaners, household cleaners, aerosol sprays, solvents, ammonia, abrasive cleaners, or cleaners containing hydrogen peroxide should not be used on the screen. Furthermore, do not use the cleaning product directly on the screen, as it may cause damage. As a result, using a dry cloth to clean a monitor is the simplest method.

However, because tap water contains minerals and other substances that can harm the screen or leave streaks on it, it’s best to use filtered or distilled water instead. If the water becomes extremely stubborn, apply a pinch of white vinegar.

The differences between a computer monitor and how it should be cleaned do not have to be stark. If you’re a regular user of the monitor, you’ll be able to keep it clean on a regular basis. If the monitor is not turned on, it is possible to cause an electrical shock. Furthermore, a black screen makes it easier to see dust and scratches. Before you can clean your laptop or monitor, make sure that it is completely turned off. Meg MacDonald’s poem, The Spruce Smudges should be removed. A non-glass-coated screen (LED, LCD) can only be touched with a small amount of force. Wipe only the areas that have been stained with gentle pressure.

A computer monitor can be easily contaminated with fingerprints, dust, and dirt. To begin, clean it with a microfiber cloth that has been thoroughly wiped down. If you need to remove fingerprints and smudges, use 70% isopropyl alcohol on a cloth or a pre-moistened alcohol wipe or Clorox Disinfecting Wipe, both of which are excellent options for non-porous surfaces. If your screen needs something strong, you can combine 1 cup distilled water and 4 cup white vinegar in a spray bottle, but distilled water is the best and safest cleaner. If you need to clean your computer monitor, never use bleach.

Has your TV screen gone black and you’re not sure what to do? A broken or cracked TV screen doesn’t necessarily mean you need to buy a new television. In some instances, you could repair the broken TV screen yourself. However, you have come to the right place if you are looking for a guide on how to fix or repair a broken or cracked TV screen.

Before you attempt to fix a broken or cracked TV screen, it’s important to note that the cost of repairing your TV might be close to or higher than the cost of buying a new one. It also might not be possible to completely fix the screen, in which case you’ll still see a broken image on your TV.

Tiny, narrow hairline cracks called “spiderweb cracks” that don’t completely shatter the screen are often repairable, mainly because they typically indicate that the components haven’t been damaged.

On the other hand, large cracks that run from one side of the screen to the other are usually irreparable. This is because they typically mean that the LCD panel has been shattered and will need to be replaced, which is usually not worth the cost.

If you have a Plasma TV, it’s important to note that these screens can’t be repaired – you’ll need to replace the entire television if the screen is broken or cracked.

Different types of cracks can cause different amounts of functional impact on your TV. However, note that in most cases, it’s not possible to completely repair a cracked screen – you’ll likely still see the crack even after making repairs.

Shallow hairline cracks are thin lines that run across your screen, possibly interfering with your vision while watching TV. These cracks typically indicate that the glass screen has been shattered, but the LCD panel is still intact.

You can quickly repair a shallow hairline crack on the screen’s surface. Cracks that penetrate the inner surface of the screen cause issues. If so, you must replace the TV screen.

It’s possible that the tiny crack didn’t form as a result of an accident or mishap but rather formed on its own. This is often caused by the screen’s material expanding or contracting due to extreme changes in temperature.

Spiderweb cracks are tiny screen cracks that emanate from a central point, creating a web-like pattern. These cracks typically result from accidentally hitting your screen or dropping your TV. Due to the fragile nature of the screen, it shatters like glass when cracked.

Given the expensive nature of TV screens, it might be more cost-effective to replace your television entirely rather than replacing the broken screen.Horizontal or Vertical Lines

If you see horizontal or vertical lines running through your screen, this means that the ribbon cable connecting the LCD panel to the driver board has become loose.

This can lead to an unpleasant viewing experience since the lines divide the screen in two, one of which is blacked out while the other displays the image.

If you have horizontal or vertical lines running through your screen, check the screen for scratches by rubbing your palm over it. However, if there are no scratches, the ribbon cable is probably loose and needs to be reconnected.

Most people mistake dead pixels for cracks, but they’re not. A dead pixel occurs when your screen is fixated on a single color or when many bright colors are present.

While we talked about how a broken or cracked TV screen is unfixable in the majority of cases, there are a few cases where a broken screen can be fixed without having to replace the entire TV.

Isopropyl alcohol isn’t just for first-aid anymore, you can use it to temporarily fix a broken TV screen as well. The rubbing alcohol will help hold the shattered glass in place, preventing any further cracking.

After letting the solution rest on the crack for a few minutes, use a different fiber cloth soaked in water to remove the alcohol. After doing this, the crack should be less visible.Petroleum Jelly

Petroleum jelly is another household staple that can be used to fix a broken TV screen. Using the jelly, the broken glass will be held together to prevent it from spreading.

To repair a scratched surface, clean it off with a microfiber cloth, then fill in any visible cracks with petroleum jelly. After letting the jelly rest on the surface, wipe up any residual jelly using a clean cloth. That should eliminate the scratches.

Sounds crazy, right? But a pencil eraser can actually help fix a broken TV screen. Just like the other two methods, the pencil eraser will help to hold the broken glass together and prevent the crack from spreading.

Start with wiping the area down using a damp cloth, and then use an eraser to clear the cracks. To prevent further damage to the screen, make sure to be gentle when using the eraser.Screen Repair Kit

The kits include a solution or paste with a cloth and detailed instructions for doing the essential screen routine maintenance. Most TVs come with a one-time use kit, so if you have more than one broken screen, you’ll need to buy an additional kit.Hire a Professional

If you have a broken or cracked TV screen and are not comfortable trying to fix it yourself, you can always hire a professional. Search for a tech repair company in your area that specializes in repairing broken TV screens.

Keep in mind that hiring a professional to fix your broken screen will likely be more expensive than buying a new TV. Unless you have an expensive, high-end TV, it’s usually not worth spending the money to repair a broken screen.

First, prices may differ depending on how big your TV screen is and if it can be set or has to be replaced. A 40″ LED TV screen, for example, may cost $200 to fix, while a 60″ LED TV screen of the same make and model could cost up to $400.

Second, the price may also differ depending on the damage’s severity. If only one pixel is broken, it may be cheaper to repair than if the entire screen is shattered.

Finally, keep in mind that the price of repairing your broken TV screen may not be worth it in the long run. In many cases, it’s cheaper to just buy a new TV than it is to fix a broken or cracked one. So make sure to weigh your options carefully before making a decision.

No one likes a broken or cracked TV screen, but fortunately, you can fix it in multiple ways. Whether you use tape, petroleum jelly, or a screen repair kit, there’s a method out there that will work for you.

Vaseline is a widely distributed product that heals, rejuvenates, and moisturizes dry, cracked skin. It is a semi-solid, with a mixture of hydrocarbons mostly found in petroleum. Advertised to be 100% pure petroleum jelly, Unilever has continued to sit at the top of the skincare market for nearly 135 years.

Compared to the commercial giant it is today, Vaseline had small and humble beginnings. Vaseline, first known as the “Wonder Jelly,” was invented by Robert Augustus Chesebrough. He was intrigued by miners who would apply a byproduct from the oil drilling. This byproduct was unrefined petroleum jelly, also known as rod wax. The workers would apply the rod wax on their burns, and Chesebrough decided to research further into it. He performed many tests of refinery and distillation to help create a safer and better product. Even though Vaseline is a versatile fix-it solution, it is composed of unsustainable and unhealthy materials that are hazardous to the environment around it. Although Unilever is making small steps every year towards more sustainable products, we can see how environmentally destructive Vaseline is through examining its acquisition of raw materials.

Crude oil is the overarching umbrella material that all of the byproduct raw materials are created from. According to oilprice.com, crude oil is first created through the compression and heating of organic materials for many years. The formation of crude oil happens through a process called diagenesis, which melts the organic material and mud together through sediment compression. Crude oil, in terms of content percentage, varies greatly. Refineries will process the crude oil differently depending on its chemical composition and contents. Since the main ingredient, petroleum jelly, consists of varying amounts of both solid and liquid hydrocarbons, there are many methods for refinement.

For the extraction process, miners drill into the oil fields, which is highly detrimental to the environment, as petroleum is the residue from nonrenewable fossil fuels. Unilever’s site claims that their raw material extraction makes up a whopping 29% of the company’s greenhouse gas footprint. They understand that sustainability is important to both their customers and the rest of the community, and have implemented plans to become 100% agriculturally sustainable and renewable sources by 2030. However, Unilever skips over how they intend to transform their Vaseline with this plan, given that Vaseline consists of 100% petroleum jelly – a byproduct from nonrenewable fossil fuel sources.

According to U.S. Energy Information Administration, petroleum production in the U.S. alone (including crude oil, other petroleum liquids, and renewable fuels) is about 13,799,000 barrels per day. Crude oil production alone is about 9,431,000 barrels per day. This is only a small measure on the global scale of crude oil production. I was not able to get any exact numbers from crude oil production, because Unilever conducts its mining, extraction, and distillation in various parts of Africa.

After some processing, crude oil becomes petroleum oil through extraction of liquid hydrocarbons at petrolatum refineries. Vacuum distillation followed by filtration of the residue through bone char will then yield petroleum jelly, the primary ingredient in Vaseline.

Petroleum jelly, our main ingredient, makes up the highest percentage of product within the Vaseline mixture. It is mined in various factories scattered throughout Africa. Vaseline comprises of 6 main ingredients – petroleum jelly, paraffin oil, paraffin wax, lanolin, Vitamin E, and polypropylene for the packaging. Petroleum jelly, paraffin oil, and paraffin wax are all various byproduct forms of crude oil.

Although Chesebrough essentially had a foolproof recipe to start with for the clear and odorless semi-solid, the production and ingredients of Vaseline have changed slightly since its beginnings. The distillation and filtering process have remained relatively the same. Because of this, artificial Vaseline has several more materials than the advertised 100% pure petroleum jelly. The information on their website, as well as their product packaging, synthesize the amount of materials contained within the product. According to Unilever’s website, Vaseline is the only petroleum jelly product with a triple-purification seal. The purification process includes distillation, de-aeration, and filtration. This ensures that the waxy substance is free of air bubbles and as uniform as possible.

In 1870, Vaseline makes its debut as the latest and most innovative product on the American skin-care market. Wanting to learn more about petroleum and its uses, British chemist, Robert Chesebrough travelled to Titusville, Pennsylvania in 1859 where abundant crude oil reserves had been recently discovered. At the site of extraction, Chesebrough noticed how the oilmen would apply residue from the drill to help their cuts to heal. After his conclusion that this cure had validity, Chesebrough patented the production of petroleum jelly in 1870. Being such a long-existing product in the realm of skin care, Vaseline’s use of energy throughout its life cycle warrants better understanding. It is a common misconception to think of energy solely as part of a product’s actual processing and manufacturing, instead of viewing the involvement of energy in the life-cycle of a product from the acquisition of raw materials through its disposal. As the world increasingly needs to become more conscious of energy consumption and sustainability to avoid an impending energy blackout, there is a significance in looking at the energy involved in a product as arbitrary as Vaseline. An awareness of Vaseline’s energy consumption should be noted in particular because it is not a product in which its consumer use involves electricity or some other kind of power source. Throughout its life cycle, the energy involved in all aspects of the production of Vaseline serves to enlighten consumers of the composition of the product and the energy required for the existence of such a widely present and versatile skin-care product.

The primary and most basic raw material that makes up Vaseline is crude oil. Most of Vaseline’s secondary raw materials are derived from crude oil after its processing into separate petroleum byproducts, each having distinct properties. These are petroleum oil, petroleum jelly, paraffin oil, and paraffin wax, Vaseline’s only ingredient which is not originally derived from crude oil is lanolin.

After extraction, the next step toward bringing Vaseline to life is the distillation of crude oil. Distillation is the first step of processing the crude oil undergoes, which creates the petroleum byproducts that are Vaseline’s secondary raw materials. The distillation process of crude oil simply divides the matter into various petroleum byproducts separated by their concentration of hydrocarbons from light to heavy. The distillation column consists of a tall furnace, off of which several pipes extend off from top to bottom. The heated furnace that causes distillation is a source of both chemical and thermal energy. The burning of fossil fuels to heat the furnace is an example of chemical energy, while the energy embodied in the created heat is thermal energy. The products with least hydrocarbons flow into the higher pipes, while products with more hydrocarbons flow into the lower pipes.

The basic manufacture of Vaseline is the result of the combination of the individual ingredients into a melted uniform solution. The factories that produce Vaseline are powered by electricity. Machines that blend the ingredients into the solution that will later become Vaseline are powered by electricity. Electricity is the resultant secondary energy source derived from the burning of fossil fuels. Chemical energy is required to produce the electricity, and the heat provided by the electricity is the result of thermal energy. Unilever Kenya, the primary factory that produces Vaseline among other Unilever skin care products, operates 24 hours a day and 6 days a week. By percentage, the factory’s energy usage is 60% burning of furnace oil, 36% electricity, and 4% liquified petroleum gas; all of these energies are fossil fuels. In 2010 the factory demanded 1.8 mega volt amps of energy to operate. This great amount of energy required for a single factory’s operation is revealing of the tremendous rate at which unsustainable fossil fuels are being used.

Vaseline, originally known as “Wonder Jelly”, is a unique multipurpose ointment that can be used to hydrate lips, soften skin, and protect skin from dryness. This multipurpose ointment gets its unique healing properties from the byproduct of distilled crude oil. Vaseline consists of ingredients that stem from petroleum, which is recovered from drilling deep into the earth. Its main ingredients are white petrolatum, paraffin oil, and paraffin wax. Due to its association with crude oil, Vaseline has become a controversial product in recent years, as consumers have become more aware of global warming and Greenhouse Gas (GHG) emissions. By analyzing all aspects of the life cycle of Vaseline and its production, we can see all the waste and emissions that subsequently come from the petroleum-based product and gain a better understanding on the effects its waste has on the environment.

The production of Vaseline begins with the extraction of petroleum from beneath the ground through the process of drilling, which happens until large pockets of oil are uncovered. The extractions process of raw materials for Vaseline and other products produced by Unilever make up 29% of Unilever’s Greenhouse Gas footprint. How could something like an ointment be the cause of such a high amount of greenhouse gas? Well first the crude oil is pumped out from the ground where the drilling occurred, and then it has to be transported to a site for it to be processed and distilled. The extraction of crude oil has lead to many waste and gas emissions, which contaminate the environment. Some of these toxic chemicals include Uranium, Thorium, Lead, and the most commonly found radioactive material (NORM) waste is Radium (Oil and Gas Waste). The waste that is produced from drilling is not only hazardous to the environment but is also dangerous to human health. The toxins such as Lead- 210 and Radium can cause neurological abnormalities, not to mention bone and lung cancer.

After petroleum is drilled from the earth it goes through multiple processes of distillation to reach the end result of differing substances. Some of these substances are used in cosmetic and other consumer goods. Petroleum must be distilled and purified by a process of "sweating" or solvent refining before being safe for consumers to use (Wax and Vaseline Plant 4). Heating up crude oil at different temperatures will produce varying types of wax-like substances. These processed substances secrete “slop oil sludge emulsion” which is treated by an acid demulsifier that can be made more acidic depending on the type and quality of the waste.

Vaseline is disposed along with the waste of petroleum and other oils because it is primarily composed of white petrolatum. Currently, discharging the waste into waterways beneath the earth, injecting it underground after being treated to reduce its toxicity, and burying it within landfills is how waste companies dispose of oil. Much of the chemical waste produced by crude oil is injected into the earth and discharged into bodies of water. Vaseline is also disposed of by incineration. While some pollutants are airborne and contaminate the atmosphere other wastes get injected into the ground where it gets absorbed into the soil. The contaminated soil reaches into waterways that feed to crops and livestock that are consumed by consumers and animals.