1.8 tft lcd display brands

Get rich colors, detailed images, and bright graphics from an LCD with a TFT screen. Our standard Displaytech TFT screens start at 1” through 7” in diagonal size and have a variety of display resolutions to select from. Displaytech TFT displays meet the needs for products within industrial, medical, and consumer applications.

TFT displays are LCD modules with thin-film transistor technology. The TFT display technology offers full color RGB showcasing a range of colors and hues. These liquid crystal display panels are available with touchscreen capabilities, wide viewing angles, and bright luminance for high contrast.

Our TFT displays have LVDS, RGB, SPI, and MCU interfaces. All Displaytech TFT LCD modules include an LED backlight, FPC, driver ICs, and the LCD panel.

We offer resistive and capacitive touch screens for our 2.8” and larger TFT modules. Our TFT panels have a wide operating temperature range to suit a variety of environments. All Displaytech LCDs are RoHS compliant.

We also offer semi-customization to our standard TFT screens. This is a cost-optimized solution to make a standard product better suit your application’s needs compared to selecting a fully custom TFT LCD. Customizations can focus on cover glass, mounting / enclosures, and more - contact us to discuss your semi-custom TFT solution.

1634 tft display 1.8 products are offered for sale by suppliers on Alibaba.comAbout 40% % of these are lcd modules, 4%% are lcd touch screen, and 4%% are oled/e-paper modules.

A wide variety of tft display 1.8 options are available to you, such as original manufacturer, odm and agency.You can also choose from datasheet, tft display 1.8,as well as from tft, ips, and standard tft display 1.8,

The Adafruit 1.8"" TFT screen is a small breakout board equipped with a colorful and bright display that can be used with many type of microcontroller thanks to its SPI interface. The board"s voltage regulator let you connect the breakout board to a 3 V or 5 V controller.

This is a single-chip controller/driver for 262K-color, graphic type TFT-LCD.  It consists of 396 source line and 162 gate line driving circuits. This chip is capable of connecting directly to an external microprocessor, and accepts Serial Peripheral Interface (SPI), 8-bit/9-bit/16-bit/18-bit parallel interface.

AllAnalog to Digital ConvertersArduino Starter KitsBatteriesBattery Charger ModuleBreadboardButton Key ModuleBuzzerCamera ModuleCapacitor &nbspCeramic Capacitors &nbspElectrolytic CapacitorsCases &nbspBattery HolderConnectors &nbspJumper Wires &nbspTact SwitchCooling FanDevelopment Boards &nbspArduino Development Boards &nbspRaspberry Development Boards &nbspSTM32 BoardsDiodesFingerprint SensorIntegrated Circuit &nbspAmplifier module &nbspCurrent Voltage Tester &nbspMicro SD Storage Expansion Board &nbspReal Time Clock Module &nbspRelay Module &nbspST TIP NXPInternet Of ThingsJoy StickLaser ModuleLEDMemory ModulesMP3 Decoding board &nbspMP3 Player ModuleMulti Coin Accetor/SelectorOptoelectronic Displays &nbspLCD ModulesPCB BoardsPCB Connectors &nbspFemale Single Row Pin HeaderPotentiometer &nbspPotentiometer Adjustable ResistorPotentiometer Knob CapPower AdaptorsPower Regulator Modules &nbspStep Down ModuleProgrammer module &nbspUSB To TTL Serial Adapter Module &nbspUSB to UART TTL ModuleProximity sensorPumpsResistor &nbspMetal Film Resistor &nbspPhotoresistor Light Dependent Resistor LDRRobotics & Aeronautics &nbspMotors and ActuatorsSensors &nbspCurrent Sensors &nbspDoor Window Sensor &nbspGas Sensor &nbspHumidity Sensor &nbspInfrared Light Sensor Module &nbspIR Infrared Obstacle Avoidance Sensor Module &nbspLoad Cell Weighing Sensor &nbspMicrophone Sound Sensor &nbspPIR Motion Sensor &nbspPulse Sensor Module &nbspRain Water Sensor Module &nbspReed Sensor Module &nbspSensor Shield Expansion Board &nbspShake Vibration Sensor Module &nbspSoil Moisture Sensor &nbspSpeed Sensor &nbspTemperature Sensor &nbspTouch Button Module &nbspTouch Sensor Module &nbspUltrasonic Distance Sensor &nbspVibration Sensor Module &nbspVoltage Sensor Module &nbspWater Level Sensor &nbspWeighing Sensor ModuleServo Shield ModuleSIGNAL FREQUENCY MODULESolar Devices &nbspSolar PanelSolenoid LockSolenoid ValveStepper Driver ChipSwitches &nbspPush Button Switch &nbspSlide Switch &nbspToggle SwitchTools &nbspDigital Multimeter &nbspMeasurement & Analysis Instruments &nbspSoldering ToolsTransistorsUncategorizedUsb Wi-fi AdapterVoice RecorderWater Flow SensorWireless Devices &nbspBluetooth & Infrared Devices &nbspESP32 Modules &nbspGPS/GSM/GPRS Devices &nbspIR Remote &nbspRFID/ RF/ WIFI Devices &nbspWireless Transceiver

The 1.8″ display has 128×160 color pixels. Unlike the low cost “Nokia 6110″ and similar LCD displays, which are CSTN type and thus have poor color and slow refresh, this display is a true TFT! The TFT driver (ST7735R) can display full 18-bit color (262,144 shades!). And the LCD will always come with the same driver chip so there’s no worries that your code will not work from one to the other.

The breakout has the TFT display soldered on (it uses a delicate flex-circuit connector) as well as a ultra-low-dropout 3.3V regulator and a 3/5V level shifter so you can use it with 3.3V or 5V power and logic. There is a microSD card holder on the back so you can easily load full color bitmaps from a FAT16/FAT32 formatted microSD card.

The Adafruit 1.8” TFT LCD Breakout Board also features an EYESPI connector for a simpler connection to the LCD. EYESPI is a single 18-pin FPC used as a quick way to connect displays.

The SparkFun TFT LCD Breakout is a versatile, colorful, and easy way to experiment with graphics or create a user interface for your project. With a 4-wire SPI interface and microSD card holder, you can use this breakout to easily add visual display/interface capabilities to a project as well as providing all the storage you might need for multimedia files.

To get started with this breakout, you will need an Arduino compatible microcontroller of your choice - we recommend something with extra RAM like the SparkFun Thing Plus. The breakout can be powered with either 5V or 3.3V. The microSD card holder is connected to the same SPI bus as the display which keeps the required pin count low and exists to relieve the burden from your microcontroller"s poor memory due to having to store hundreds of images of cats, or really whatever you want to keep there. We have also gone ahead and tricked out the SparkFun HyperDisplay library with a driver made especially for this breakout!

Out of the box, the SparkFun TFT LCD Breakout will come with a large backing PCB that makes it easy to securely mount the display in a project. If you need a more flexible solution you can remove the display module, snap off half the backing board, and then re-insert the display module. When this is done you"ll be left with the bare minimum frame around the display to more seamlessly integrate with your project.

Focus Displays offers a wide range of standard full color TFT displays. 64 million unique colors, high brightness, sharp contrast, -30C operating temperature, and fast response time are all good descriptions of a TFT display. This is why TFT technology is one of the most popular choices for a new product.

Thin Film Transistor (TFT) display technology can be seen in products such as laptop computers, cell phones, tablets, digital cameras, and many other products that require color. TFT’s are active matrix displays which offers exceptional viewing experiences especially when compared to other passive matrix technologies. The clarity on TFT displays is outstanding; and they possess a longer half-life than some types of OLEDs and range in sizes from less than an inch to over 15 inches.

CCFL’s are still available, but are becoming a legacy (obsolete) component. TFT displays equipped with a CCFL require higher MOQs (Minimum Order Quantities) than displays with LED backlights.

The majority of TFT displays contain a touch panel, or touch screen. The touch panel is a touch-sensitive transparent overlay mounted on the front of the display glass. Allowing for interaction between the user and the LCD display.

Some touch panels require an independent driver IC; which can be included in the TFT display module or placed on the customer’s Printed Circuit Board (PCB). Touch screens make use of coordinate systems to locate where the user touched the screen.

Resistive touch panels are the lowest cost option and are standard equipment on many TFT modules. They are more common on smaller TFT displays, but can still be incorporated on larger modules.

Contrast ratio, or static contrast ratio, is one way to measure the sharpness of the TFT LCD display. This ratio is the difference between the darkest black and the brightest white the display is able to produce. The higher the number on the left, the sharper the image. A typical contrast ratio for TFT may be 300:1. This number ratio means that the white is 300 times brighter than the black.

TFT LCD displays are measured in inches; this is the measurement of the diagonal distance across the glass. Common TFT sizes include: 1.77”, 2.4”, 2.8”, 3”, 4.3”, 5”, 5.7”, 5.8”, 7”, 10.2”, 12.1 and 15”.

As a general rule, the larger the size of the glass the higher the cost of the display, but there are exceptions to this rule. A larger display may be less expensive than a smaller display if the manufacture produces higher quantities of the larger displays. When selecting your color display, be sure to ask what the cost is for one size smaller and one size larger. It may be worth modifying your design requirements.

TFT resolution is the number of dots or pixels the display contains. It is measured by the number of dots along the horizontal (X axis) and the dots along the vertical (Y axis).

The higher the resolution, the more dots per square inch (DPI), the sharper the display will look. A higher resolution results in a higher cost. One reason for the increase in cost is that more driver chips are necessary to drive each segment.

Certain combinations of width and height are standardized and typically given a name and a letter representation that is descriptive of its dimensions. Popular names given to the TFT LCD displays resolution include:

Transmissive displays must have the backlight on at all times to read the display, but are not the best option in direct sunlight unless the backlight is 750 Nits or higher. A majority of TFT displays are Transmissive, but they will require more power to operate with a brighter backlight.

Transflective displays are readable with the backlight off provided there is enough ambient light. Transflective displays are more expensive than Transmissive also there may be a larger MOQ for Transflective. However, Transflective displays are the best option for direct sunlight.

Drivers update and refresh the pixels (Picture Elements) of a display. Each driver is assigned a set number of pixels. If there are more pixels than a single driver can handle, then an additional drivers are added.

A primary job of the driver is to refresh each pixel. In passive TFT displays, the pixel is refreshed and then allowed to slowly fade (aka decay) until refreshed again. The higher the refresh frequency, the sharper the displays contrast.

The controller does just what its name suggest. It controls the drivers. There is only one controller per display no matter how many drivers. A complex graphic display with several thousand pixels will contain one controller and several drivers.

The TFT display (minus touch screen/backlight) alone will contain one controller/driver combination. These are built into the display so the design engineer does not need to locate the correct hardware.

If you do not see a Thin Film Transistor (TFT) Display module that meets your specifications, or you need a replacement TFT, we can build a custom TFT displays to meet your requirements. Custom TFTs require a one-time tooling fee and may require higher MOQs.

Ready to order samples for your TFT design? Contact one of our US-based technical support people today concerning your design requirements. Note: We can provide smaller quantities for samples and prototyping.