tft lcd color monitor no signal supplier

Sometimes, when we try to connect a different monitor to our PC, we get the problem of no signal. This signal issue can also happen when we are working when the monitor goes to sleep when we restart, or while starting your pc for the day.

Are you facing trouble with Asus monitor HDMI with no signal? Well, this problem can be caused by defective connections, damaged cables or monitors, and outdated drivers. The solution might include resetting the connections, replacing cables, and repairing.

This article will address the possible causes of this no-signal issue. Then we will look at the solutions by dividing them into primary, secondary, and final sections. We hope this article will be enough to save you from this irritating monitor hassle.

If you know the causes of your problem correctly, you can cure them quickly. By understanding the reasons behind your Asus HDMI monitor not responding, you can solve the complication from the root. Also, you can avoid the causes in the future.

Remember that your electronic devices need a smooth power flow to work correctly. If you have an interrupted power supply, it can harm your PC. Using a poorly constructed cheap adapter or multiplug with low-quality cable is also responsible for HDMI no signal.

The primary reason you get HDMI no signal notification is a broken HDMI cable. Even your other cords like power cables, DVI cables, and DisplayPort cables can be damaged. Putting the wrong thread into the wrong port can damage the power supply ability of the cord.

The ports behind or under your Asus monitor can be damaged too. Force input, wrong insertion, overheating, or overpowering can harm the display port, including the HDMI port. Not understanding which port goes with which cable can lead to this problem.

If your deceive drivers like chipset drivers or graphic drivers get out of date, you may face the monitor not working issue. Backdated graphic drivers can not match and detect with the new monitor, so they became unable to send the signals properly.

Loose connection, poor setup, and wrong placement can cause damage to your PC’s hardware. Your monitor can be faulty or broken from the inside. Also, hardware like the video card, CMOS, or motherboard can be flawed, loose, broken, or burnt to work correctly.

Neither your Asus monitor nor any technological device is error-free. Do not lose tamper if you are getting no signal in your HDMI-based Asus monitor. By checking some easy-to-follow yet effective actions step by step, you can get rid of this issue.

Your first and foremost job is to ensure that you have a stable power supply. Check your main or wall outlet, socket, and receptacle if they are working fine. Also, use an adaptor to support your monitor and power supply equally.

Restarting or reconnecting your devices and all the links is an initial thing to do. Disconnect your tv or monitor and PC from the power source. Unplug all the HDMI cable from the PC, monitor, and adaptor. After some time, reconnect them all and start working.

As this is an HDMI-related problem, you need to check the HDMI ports initially. Examine if the HDMI input of your monitor, pc, and adaptor is clean and not damaged. You should disconnect and reconnect all the HDMI ports with the HDMI cable properly.

Asus monitor is not detecting HDMI or HDMI signal, this particular problem happens for loose connection. Check if the cords are inserted properly. There should be no gap between the port and cable connection.

If you notice any damage to your HDMI cable or monitor power cable like, cut, bend, nicks, or cracks, immediately throw them away and replace them with new cables. Also, it would help if you never consider using old cords or repairing damaged HDMI cables with scotch tape.

Disconnect your HDMI cable from your Asus monitor and try another one. If it works, then the problem is in your cable. Try connecting your monitor to another computer. By this method, you will be sure whether it has hardware issues and move forward.

You need to update your graphics driver or graphics card to the latest version. Also, update the chipset drivers from the display settings. If you don’t know or are too scared to update the drivers, use a third-party setup to recognize the drivers and update them automatically.

Before starting your display, check if the resolution of your Asus monitor is set lower than your graphics card. Match the resolution configuration so that the graphics card can support the monitor. Check your refresh rate as well.

Resetting your Asus monitor by factory reset is the final solution to the software problem before going hardware. The reset option depends on the monitor type. We hope a factory reset will solve the HDMI no-signal problem and make your monitor run smoothly.

So, if your Asus monitor is not turning on or showing a completely blue screen, then try to reset it. To reset, press the side button beside the power button. Then it goes like this, Menu> System Set Up> More> All Reset> Yes.

If all the above methods do not work, you need to know that the problem started from your PC or computer. Open the case of your pc and check that all components are ok and not damaged or replaced.

We recommend checking your video card, CMOS, graphics card, ram stick, and motherboard accordingly. Do not hesitate to run to your nearby service center and repair the broken part if you find any faults.

Regarding the solution we recommended, you need to perform some software and hardware actions regarding the Asus monitor HDMI no signal issue. Let’s learn how:

We recommended connecting different cables with their ports properly to avoid issues like HDMI signal error. Now we will learn a little basic about HDMI port, VGA port, and DVI port.

To avoid issues like DVI no signal Asus or VGA no signal Asus, you need to connect the DVI cable with the DVI port. The same goes for VGA cable and port. Also, ensure they are inserted fully.

Yes. A weak and interrupted power supply can cause no signal to monitor. Without proper power flow, the monitor can not get enough HDMI signal to a process and perform.

Try to unplug and replug the HDMI cable to the port. Also, try disconnecting your devices from the power source. Resetting your monitor can also solve the problem in the first place.

It can happen if your multimedia interface has a problem. Either the resolution of your graphics card is not similar to your monitor’s resolution, or your HDMI cable is damaged.

You can use both HDMI and Display port connectors for gaming. But, DisplayPort supplies high definition signal than the HDMI device. It also serves better resolution and refreshes the rate balance with the graphics card.

You need a good DisplayPort cable or HDMI cable to connect the devices. Connect one end of the line to the monitor’s port and the other end to your PC’s port accurately and adequately without any force.

The most likely reason for this is that your graphics card does not support Display Port. Please make sure that your graphics card supports Display Port and that the cable you are using is also compatible.

Check if your monitor is displaying an image that looks fuzzy, distorted or blotchy. Also, check to see if the image changes when you move your head or if the image disappears and reappears when you change your angle. If either of these symptoms is present, it may be time to replace your monitor or your cable.

Asus monitor can stop having any signal from your pc, especially when you try to connect a second monitor. However, people with one monitor can also face this issue very often. By following our guidelines, you can solve the problem smartly.

Do not lose your temper and check for any damage in your cable, port, or any component of your PC. Turn off the running program on your pc because a corrupted program can prevent the balance between your pc and monitor.

You are having Asus monitor HDMI with no signal problem either because of software or hardware problems. Try to find out which problem your monitor is facing and follow our step-by-step solutions to prevent the issue.

So I bought yet another Raspberry Pi and got a 7" Car Montor (http://amzn.to/1XRvw0Y) with it. I"ve soldered the monitor to a 12V 1Amp Wart and it seems to be working perfect. However, when I hook up the Raspberry Pi 2 Model B the monitor receives no signal.

I have no old video or dvd player so I can"t test it today. Tomorrow I"m stopping by my parents in law to check it out with an old VCR player to see if the signal is OK and it"s some setting with my Raspberry Pi.

To provide you more detailed instruction, you can also click ASUS Youtube video link below to know more about Troubleshooting for No display on LCD Monitor

Check if the signal cable (VGA / DVI / HDMI / DisplayPort) is wellconnected , and confirmed another end of the output cable has been firmly connected to computer input port (graphics card). Unplug and plug 2-terminals again to ensure all pins aren"t bent.

Check if the signal cable (VGA / DVI / HDMI / DisplayPort) is wellconnected and confirmed another end of the output cable has been firmly connected to computer input port (graphics card). Unplug and plug 2-terminals again to ensure all the pins aren"t bent.

If the model had attached with the power supply (AC-adapter), make sure the power supply has connected to the screen. Please check if the light of power supply is ON. If the light is NOT ON, change another power supply to test.

Are there any regional differences inpower specifications thatASUS LCD monitor supported (for example: If monitor was bought in Taiwan, can it be used in China or other countries?)

ASUS LCD monitor can support power specification: AC 100-240V. As long as within this voltage range, the display can work properly. However, please be noted that if you bought a monitor from another region, the power cord is not necessarily compatible to power outlet. Customer should replace the appropriate power cord or plug adapter in order to ensure normal power supply of the display.

This monitor was bought to be put in the headrest of a 2006 gmc sierra crew cab sle. The fit was tight but it works like a champ. I think i should have bought on a little smaller maybe 5 inches instead of 7 but this one worked fine. The only issue i see is one that i think most tft monitors will have and that is that the viewing angle is not that great. Because its on the back of the seat if the seat is reclined back too far the viewing angle for an adult in the back would be around 5-10 degress looking down on the monitor. that angle causes some of the color to wash out while viewing. Like i said I don"t know if there is anyway around that with tft other than adjusting the headrest height or the angle of the seat. But i would recommend this for someone wanting to install headrest monitors at a low price. I"m actually buying another one to put in the passenger seat and decided to write this review during my purchase. also keep in mind that once you install the monitor, even though it is removable its not that easy to remove. The monitor does have release buttons to remove from the headrest shroud but there is a cable that you will have to run through your seat for power and video that makes it not easily removable. it can be done but depending on your install if its like mine i ran the wire inside the seat cover so i would have to unsnap the seat covering to reconnect once disconnected and that isn"t something you want to do on regular basis. the monitor does have a power button so you can turn it off separately with the car on.

For anyone considering doing this themselves its not that hard. If you"ve installed car stereos you can do this. Just measure everything twice to make sure you don"t overcut. here is a series of videos that can help which i recommend you look at before attempting the install. they are clear and concise and even give a few good tips to help make the job go easier. [...]

Altogether I"ve spent around $150 which replaced the factory radio with one that plays usb, dvd and sd cards with a 3" video display. It also plays a few video formats including xvid and divx. MP3, video and photos can be stored on the sd card and accessed via the unit by switching via the menu. I added two 7" headrest monitors that are connected to the receiver so my kids watch videos on trips. With the 16b sd card i use in the receiver there is plenty of space for both video and music. I also installed a backup camera that is flush mount and looks like a factory install. Can"t beat all that for $150 bucks. recap

When you meet a technical problem, you can use the following tips to troubleshoot the problem, and also enjoy the fun of solve problem. If can’t solve the problem, now, you need contact us.

Check the camera’s brand model and HDMI/ SDI output support format. Change camera internal system and video settings, Check whether it works at other signal input format.