5 inch 800x480 tft lcd hd fpv monitor for sale

ER-TFTM050-3 is 800x480 dots 5" color tft lcd module display with RA8875 controller board,superior display quality,super wide viewing angle and easily controlled by MCU such as 8051, PIC, AVR, ARDUINO,and ARM .It can be used in any embedded systems,industrial device,security and hand-held equipment which requires display in high quality and colorful image.

It supports 8080 6800 8-bit,16-bit parallel,3-wire,4-wire,I2C serial spi interface. Built-in MicroSD card slot. It"s optional for 4-wire resistive touch panel (IC RA8875 built-in touch controller),capacitive touch panel with controller,font chip, flash chip and microsd card. We offer two types connection,one is pin header and the another is ZIF connector with flat cable.Mounting on board by default. There is no capacitive touch panel connection on the board of ER-TFTM050-3,its capacitive touch panel needs to be connected with your external board.Now we design another new board with capacitive touch connection named_ER-TFTM050A2-3.

Of course, we wouldn"t just leave you with a datasheet and a "good luck!".Here is the link for5" TFT capacitive touch shield with libraries,examples,schematic diagram for Arduino Due,Mega 2560 and Uno. For 8051 microcontroller user,we prepared the detailed tutorial such as interfacing, demo code and development kit at the bottom of this page.

This FPV monitor is a small compact 5" super bright LCD screen. Excellent choice for a portable FPV monitor, or as a secondary backup screen or for your friends to watch. The 450cd/m² is plenty bright for outdoor applications where you need a bright screen, and the included snap-on pop-up sun shade will help keep unwanted light off the screen, reducing glare. Ultra compact and the sun shade will fold up while mounted on the screen.

This monitor will not go to a blue or black screen when video signal is lost or static. Perfect for an FPV application where you don"t want your screen to go blank.

A wide variety of fpv lcd monitor options are available to you, such as without remote control, voice control.You can also choose from intermediate, fpv lcd monitor,As well as from plastic, {2}, and {3}. And whether fpv lcd monitor is remote control, {2}, or {3}.

*****widely compatible with This 5 inch resistive touch screen designed for Raspberry Pi 3 2 model B RPI 1 b + a + can"t work with Raspberry Pi zero directly Can work with all standard HDMI device but the touch function is just for Raspbian and Ubuntu systems

*****No Need External Power Supply When the 5 inch monitor work with RPI it don"t need external power supply This Raspberry Pi screen power supplied and can be touched by GPIO display by HDMI If it is powered by external power there will be no touch function and please use 5V2A power supply to power it

If you are not completely satisfied with your purchase for any reason, you may return it to us for a full refund within 15 days from delivery date. All returned items must be in new and unused condition, with all original tags and labels attached.

If an item is found damaged or defective on receipt, we kindly ask you to contact us within 15 days from the delivery date to arrange a refund or exchange without physical return of the item.

During FPV mode, single press record button to begin video recording,and single press record button to stop video recording,it will automatically save previous video as AVI file.