can cold temperatures kill an lcd touch screen for sale

Cold weather can damage electronics, best to keep them indoors. While you"re planning to keep yourself warm during the cold weather, make sure you consider your electronic devices, too. Tech experts say the cold can drain your battery in minutes, cause permanent damage and it can also freeze an LCD screen.

While normally a cool environment is preferable to a warm one when it comes to keeping your electronics up and running, if it gets too cold, certain components can suffer sudden failure. For instance, LCD screens contain fluid and at extreme temperatures can freeze.

Electronics begin to break down and fry at temperatures above 120 degrees. Most systems tend to run 10 to 20 degrees hotter than room temperature, so anything you can do to reduce the build-up of heat will help to protect your investment better.

After a few hours in the cold, your battery will likely be drained completely, rendering your gadget useless until its next charge. Damage is done to screens and monitors when left out in the cold.

2) What are the temperature limits of electronics? At the low end, operation of semiconductor-based devices and circuits has often been reported down to temperatures as low as a few degrees above absolute zero, in other words as low as about −270°C.

Circuit systems within electronics work best at lower temperatures. Allowing systems to run for prolonged periods of time in high temperatures can decrease the longevity and reliability of devices. Solid-state electronics actually begin to break down and fry at temperatures much above 120 degrees.

An LCD or LED TV may not perform well under extreme temperature conditions. In the cold, the response time of an HDTV picture may lag. For this reason, many LCD and LED television manuals will specify a safe-operating-temperature range. In most HDTVs, this range is about 50–90°F.

It"s okay to store it in the garage but if you bring it inside from a very cold/damp place, I"d recommend you let the TV sit for a while to allow for any condensation to evaporate before plugging it in. An hour should do it.

Do not leave a laptop in a cold car for more than an hour if the temperature is below 10 degrees Celsius. Leaving a computer in freezing conditions can actually cause permanent damage to the battery and LCD screen. Reduce the risk by storing the computer in an insulated box in the trunk.

Laptops have been designed to work within a safe temperature range, typically between 50 to 95 degrees F (10 - 35 degrees C). This range refers to the optimal usage temperature of the outside environment and the temperature the laptop should be warmed to before using.

However, you do need to make sure your electronics are protected from moisture, water, wind, and extreme hot and cold temperatures. You should also make sure your electronics are made for outdoor use and not indoor-only use.

The trick to properly storing electronics in heat and cold is to avoid those temperatures altogether! Electronics are best stored in HVAC regulated environments between 50 and 80 degrees.

LCD stands for liquid crystal display. When temperatures dip below 32-degrees Fahrenheit, liquid freezes which can cause permanent damage to your LCD screen. That"s the number one reason to make sure you never leave your computer in a cold car or even on a cold floor overnight.

Best case scenario, the cooling system needs to be repaired and the internals of the Xbox would need to be cleaned. Worst case, you have a stylish $500 paperweight. I"d advise against leaving the Xbox in the car overnight if it"s 40 degrees Fahrenheit or lower.

Cold temperatures are not as dangerous to a computer as overheating is, but problems can still occurs. If computers get too cold when left powered off, their components can be damaged upon boot because the electricity heats the circuit.

Generally, once it hits 90° or 95° Fahrenheit, you want to start shielding your laptop and smartphone from the heat. Remember that the inside of your car will get hotter than the outside, too, so even if it isn"t quite 90° outside, you should keep it in your bag or leave it at home.

Extreme heat and cold can damage your battery. For example, don"t leave your smartphone in the glove compartment of your car on very hot or cold days. A common myth is that batteries last longer if they are put in the freezer. This is not correct and can damage your battery.

Safe temperatures vary from when the TV is being used or when being stored. LCD and Plasma Operating temps: 40 to 95 degrees Fahrenheit. LCD and Plasma Storage temp: -5 to 120 degrees Fahrenheit.

What Temperature Is Too Cold for a TV? Ideally, it would be best to store your LCD between 40 and 100 degrees Fahrenheit to avoid freezing the liquid crystal fluid. LCD televisions should not be stored below minus 20 degrees Fahrenheit. In the cold, an HDTV image"s response time may lag.

Electronics. Most electronics are not meant to stand up to the outdoors, and that"s essentially what your garage is like. Not only will your electronics collect dirt and dust, but they will also become damaged. Humidity and temperature fluctuations will destroy batteries and other operating pieces to your electronics.

Cold weather can damage your laptop in multiple ways, from disabling your display and corrupting your hard drive to shattering your screen if it is warmed up too quickly. Both using and storing your laptop in a cold environment can cause problems.

Since the individual pixels utilize a fluid-like crystal material as the ambient temperature is reduced, this fluid will become more viscous compromising performance. For many LCD displays, temperatures below 0°C represent the point where performance degrades.

Cold weather can damage electronics, best to keep them indoors. While you"re planning to keep yourself warm during the cold weather, make sure you consider your electronic devices, too. Tech experts say the cold can drain your battery in minutes, cause permanent damage and it can also freeze an LCD screen.

Never leave your smartphone, notebook, tablet, or any other mobile device in your cold vehicle for extended periods of time. Even with a case, such extended time can cause permanent internal and external damage.

PC World found that different gadgets can withstand different temperatures of cold, but to be conservative, we recommend taking precautions once the ambient temperature reaches freezing, or 32° Fahrenheit.

Well, most consumer electronic devices use lithium-ion (Li-ion) batteries and those batteries cannot be charged at subfreezing temperatures (below 32°F or 0°C) without causing damage.

Laptops have been designed to work within a safe temperature range, typically between 50 to 95 degrees F (10 - 35 degrees C). This range refers to the optimal usage temperature of the outside environment and the temperature the laptop should be warmed to before using.

An LCD or LED TV may not perform well under extreme temperature conditions. In the cold, the response time of an HDTV picture may lag. For this reason, many LCD and LED television manuals will specify a safe-operating-temperature range. In most HDTVs, this range is about 50–90°F.

Cold temperatures can degrade the functionality of an LCD/ LED television or cause harm to sensitive electronic components by forming condensation on them.

Do not leave a laptop in a cold car for more than an hour if the temperature is below 10 degrees Celsius. Leaving a computer in freezing conditions can actually cause permanent damage to the battery and LCD screen.

LCD stands for liquid crystal display. When temperatures dip below 32-degrees Fahrenheit, liquid freezes which can cause permanent damage to your LCD screen. That"s the number one reason to make sure you never leave your computer in a cold car or even on a cold floor overnight.

LED TVs can be stored in cold weather as long as it"s not in use. Samsung recommends that their LCD TVs are stored at temperatures ranging from -4° to 113° Fahrenheit.

Electronics are best stored in HVAC regulated environments between 50 and 80 degrees. Humidity control is another important factor in climate controlled indoor storage as moisture can be one of the biggest culprits for electronics damage.

Cold weather can damage your laptop in multiple ways, from disabling your display and corrupting your hard drive to shattering your screen if it is warmed up too quickly. Both using and storing your laptop in a cold environment can cause problems.

Can a regular TV be used outdoors? Even if it is well placed out of direct rain, a regular TV should not be used outdoors unless it is properly protected with some type of specific built-to-last outdoor TV enclosure. There are many weather and environment threats like rain or bugs to consider.

Safe temperatures vary from when the TV is being used or when being stored. LCD and Plasma Operating temps: 40 to 95 degrees Fahrenheit. LCD and Plasma Storage temp: -5 to 120 degrees Fahrenheit.

Ambient temperature below 35 F/1.7 C: Generally speaking it"s too cold to operate at this point. You"re dangerously close to freezing and that"s when the physical properties of computer hardware change by flexing (usually). It"s just not a good idea to operate a computer below this mark.

While many electronics are designed to withstand up to 176 degrees Fahrenheit, the recommended temperature limit is 95 degrees Fahrenheit. Consistent high temperatures can lead to permanent damage to your device. Some devices will power themselves down to avoid this risk.

Don"t put it in a fridge. Condensation will kill it eventually. If you really can"t upgrade the machine, use an airconditioner. Put the laptop near the vent, and it will do what you need.

Circuit systems within electronics work best at lower temperatures. Allowing systems to run for prolonged periods of time in high temperatures can decrease the longevity and reliability of devices. Solid-state electronics actually begin to break down and fry at temperatures much above 120 degrees.

You can protect your electronic devices from damages due to cold weather by merely keeping them inside. Most electronic devices are designed to work between the 32 and 100 degree temperature range. Make sure that your device stays in that range when you have to bring it out in the cold.

All electronic components are subject to failure due to overheating. Any increase in temperature can result in a reduced lifespan. This includes increase in temperature due to ambient temperature of the environment, heat produced by the device itself, and the product"s efficiency at heat removal.

The ideal operating temperature of a computer"s environment ranges from 50 degrees F to 82 degrees, though it should be as close as possible to room temperature, 72 degrees. Laptops should operate between 50 and 95 degrees.

While you"re planning to keep yourself warm during the cold weather, make sure you consider your electronic devices, too. Tech experts say the cold can drain your battery in minutes, cause permanent damage and it can also freeze an LCD screen.

I have an inexpensive flash-based MP3 player that I got for skiing, and finally got around to using it this weekend with Giro Tune-ups (which work really well, FYI). Temps were 5-15 degrees. Player was in my pack on the first day, no problems, and was in my jacket for the second (colder) day. At the end of the second day, the LCD screen on the MP3 player had developed a big blotch across the middle, such that 80% of the display was no longer legible. After warming it back up inside, overnight, the screen is still 80% gone. Player works fine -- just can"t see anything on the screen. I"m returning it for another one.

Anyone have this happen with any LCD device in very cold weather? I"m glad it was a cheap MP3 player, under warranty, rather than my camera. I would"ve thought that it would remain warm enough inside my jacket, but maybe not.

- Please be advised that the recommended storage temperature should be between -20 Celsius and +60 Celsius. However,thetelevision cannot be plugged in until the television"s internal temperature is 0-40 degrees Celsius. Please ensure that you unplug the television prior to storing it, and that the television is well warmed-up before plugging it in after the storage period. Regards, Panasonic Canada Inc. - Customer Care Centre - bg

- Thank you for submitting your inquiry to Samsung.For all 3 different technologies, LCD, DLP or PLASMA, the manufacturer recommends a storage temperature (TV off mode) between -4°F to 113°F (-20°C to 45°C). Same storage temperatures for all. We also recommend that regardless of what type you buy, that you unplug the TV from the wall socket when not in use for a very long period and to let TV warm up by just plugging it for 12 hours before operating the next time. - Samsung Limitless Support

- I"m glad to provide you the information regarding the operating temperature and storage temperature of the Sony TV. The television can be placed in storage with environmental temperatures between -4 to 140 degrees Fahrenheit (F) and 20-90% Relative Humidity (RH). The recommended temperature for proper operation is between 41°F to 96°F. Proper operation outside of this temperature range cannot be guaranteed. Thank you for your time. Sony of Canada, Ltd. C6EL Jason

I don"t know if a freezer would get the units cold enough to see what happens. I"ve used both grayscale and coler etrex units outside in the winter, and find they"re good to a little below zero fareheit most of the time if you use lithium batteries. Somewhere around zero or a little below, the sreen will get really sluggish, and start doing strange stuff where only parts of it update and stuff like that. The unit will keep recording good tracks though long after the display stops working. On the other end of the spectrum, having taken the Grayscale units into the desert many a time, I can report that direct hot sun on the display will cause the constrast to change to the point you can"t read the screen anymore, and that with eTrex units or a G-III at least you can"t adjust the constrast enough to make them useable. I haven"t observed similar behavior with color units yet though.

On the Teton snowshoe backpacking trip I went on where it got cold enough to cause my VistaC display to fail, I just used the lanyard and kept it inside my coat worn around my neck most of the time. You can then pull it out and use it for a considerable amount of time before it gets cold enough to cause any problems. Other than the rare occasion, most of time though I don"t expose my units to the cold for a long enough period of time to experience problems. As I age, I find I"m a lot less likely to expose myself to that sort of condition. (Who knows, maybe it"s wisdom)

Both Apple and Android companies are warning customers to bring their electronics inside, and not leave them in their vehicles for an extended period of time because the cold air can cause permanent damage, and in certain cases cause items to explode.

The temperature in New York City on Tuesday was a high of 19°F and a low of 4°, which is being blamed on the Polar Vortex that is ravaging most of the country with icy weather.

Stepping into the bitter cold, you may have noticed such bodily effects as numbing of the extremities and difficulty breathing. But people are not alone in battling the effects of the cold. Some of our most prized possessions also react to the dipping thermostat: our mobile devices.

Smartphones are known to withstand cold temperatures much better than hot; however, extreme cold temperatures can have adverse effects on our favorite gadgets. Studies have shown that many Android devices fare better in the cold than Apple devices, but smartphones across the board appear to succumb equally at about -40 Degrees, where all functionality ceases.

Though it may just feel like its -40 out, recent temperatures are actually low enough to elicit negative effects on smartphones. Here’s a list of issues than can arise in your smartphone due to the cold.

Battery drain is one of the most immediate effects of cold weather. Devices may spontaneously shut down with a dead battery in the extreme cold. Over time, extended exposure to cold temperatures can kill a smartphone battery all together.

Smartphones with LCD displays are more susceptible to the cold than those with AMOLED displays. With LCD displays in particular, users may experience delayed touchscreen reactions as well as smudging and ghosting of text and colors. Display panels are also more susceptible to shattering when dropped as the cold makes the panel rigid.

In extreme cold temperatures smartphones may begin to register various errors of a their internal components. Devices may have difficulty reading a SIM card or executing a number processing functionalities.

As said, extreme cold causes components of smartphones, both internal and external, to become rigid, which could lead to physical damage like spontaneous screen shattering. Drops or blunt movements can also crack a screen and dislodge or damage internal components. Devices left in extreme cold temperatures for an extended time can be susceptible to permanent damage, especially when left in ‘sleep mode.’

Smartphones are susceptible to liquid condensation underneath their displays if they are used soon after being brought into a warm area after an extended time in the cold. This can cause various liquid damage issues and can also make the screen hard to read.

Don’t take your smartphone out in the cold/limit use in the cold. Leave your smartphone in your pocket, jacket, bag or purse. Leaving devices in a pocket close to your own body heat is most recommended.

Protect your smartphone with a heavy duty, weatherproof case such as an OtterBox or Lifeproof case. Such cases are dirt proof, waterproof and drop resistant.

Use warming gloves when handling a smartphone in the cold. Whether gloves are warmed or not, protecting yourself in the cold will also help prevent accidental drops due to your own physical reactions to the cold.

Don’t leave your smartphone in a cold vehicle for extended periods of time, especially not overnight. Such extended use can cause permanent internal and external damage.

Keep your smartphone away from or protected from snow related activities such as shoveling or sledding. In addition to the cold, the opportunity for the device to get wet is also great and extremely damaging.

Use headphones or a Bluetooth earbud and mic in order to keep smartphones put away while out in the cold. Not only do many Bluetooth devices have call answer buttons, many smartphones have quick answer options, which will allow users to take calls without handling the device.

Charge your smartphone before going outside. If your battery is fully before going out into the cold, it is less likely to experience battery drain. Keep a mobile charger around for long trips as well as an extra battery for backup.

If your smartphone happens to be exposed to extreme cold, the best thing to do is to turn the device off and allow it to warm back up to room temperature before turning it on again for use. This not only helps prevent condensation, but also helps prevent any other damage that might occur while the device is warming up.

Across the Midwest today, hundreds of schools and businesses are closed, dozens of flights and trains have been canceled, and the governors of Wisconsin, Illinois, and Michigan have declared states of emergency as a bone-chilling, breath-taking Polar Vortex bears down on the region. While I slept in Minneapolis, overnight wind chills in the city topped –50 degrees. With temperatures like that, you can’t stay outside for more than five minutes without running the risk of frostbite.

As a native Midwesterner, I’m used to the annual assault of winter weather on the human body, hairless and adapted over millennia to indoor living as we are. Despite our thermoregulatory shortcomings, we’ve managed to survive extreme cold through technology—from insulating clothing to systems that pump hot air and water around our homes.

But much of the tech that facilitates our connected modern lives itself loses functionality as temperatures drop below freezing. Batteries, screens, sensors, lightweight materials—the things that power our modern mobile lifestyles—just don’t work when it gets this cold. Here’s what to expect of your gear.

Think about all the gadgets that you regularly plug into a power strip. It’s a lot, right? Besides everyday items like a phone and laptop, you might also have a fitness tracker, smart watch, Bluetooth headphones, digital camera, e-reader, vape pen, drone, or rechargeable bike lights, just to name a few. Most if not all of them are powered by lithium-ion batteries, whose high energy density and ability to handle both low and high currents have made them the industry standard for personal electronics. But those same properties become a problem as soon as temperatures dive below 32 degrees F.

“Lithium-ion batteries suffer so badly in freezing temperatures because they have very little internal resistance,” says Hanumant Singh, an electrical engineer at Northeastern University who builds cold-weather robots for places like Antarctica and Greenland. Less resistance means these batteries generate less waste energy as heat (a good thing in more mild climes). But the absence of waste heat also means they’re more vulnerable when temperatures plummet. The colder it gets, the slower the metabolism of the chemical reaction inside the battery. The battery drains faster as a result. If you’ve ever been texting someone at a healthy-looking 25 percent charge only to have your phone die mid-eggplant emoji two seconds later, you’re familiar with how steep the drop-off can be. “It’s very dramatic,” says Singh. Carrying around a smartphone in any weather colder than –35 degrees F, he says, will kill it completely in 5 minutes—right around the time frostbite would strike the hand holding it.

Such deficiencies are particularly pronounced in devices like smartphones, which are designed to sit mostly inactive for long periods of time throughout the day. Their batteries never draw enough current to heat themselves. But vehicles like drones and electric cars, which demand very high power for shorter periods of time, can generate enough warmth to keep the batteries going, just at a greatly reduced level of performance. While cold weather is a challenge for all electric vehicles, the small size of electric scooters can make them especially vulnerable to failures, as noted by several “juicer” forums on Reddit. Companies like Lime monitor the performance of their fleets, including battery life, but say they are not yet aware of any trends coinciding with this week’s plummeting temps.

The performance of individual products will of course vary based on the manufacturer, battery model, and wear and tear on the device. Apple suggests not operating its phones below 32 degrees F. Amazon says the same for the Kindle. Fitbit, on the other hand, recommends a minimum ambient operating temperature no colder than 14 degrees F for its wellness wearables, which should maintain better temperature control based on continuous contact with your skin. But the same general rules apply to anything that uses lithium-ion battery technology.

Interestingly, there are many different factors to consider if you want to install an outdoor monitor in an area exposed to the elements.  Not only do outdoor monitors / outdoor signage need to be weather-proof, but useful in their new location. Our SRMW- and SXOBH- SeriesVideo on Monitor View-ability in Direct, Bright Sunlight

When you search for a waterproof high brightness LCD display or weatherproof touch screen, it is essential to make sure they are designed for the job. Check out our SRMW-24Z-SS 24 inch weatherproof screens.  For 2500 nits brightness, our SXOBH-55-4 and SXOBH-65-3 waterproof Sunlight Readable monitors will be the best outdoor monitor solution. Rated IP 68, they provide the highest level of protection of any outdoor  monitor on the market today. And all TRU-Vu monitors are TAA Compliant.

Ingress Protection Code (IP) is an internationally accepted standard.  It classifies and rates the degree of protection provided by enclosures. Protections include against intrusion and dust. Also included are accidental contact, and water. For example, this rating provides a standardized metric to compare different products’ performance with each other. The first number refers to protection against solids.  IP second number refers to protection against liquids.  Additionally, there may be an X in the rating. It means testing was not performed for that specific protection.  For a more detailed description onIP Ratingsfollow the link.  View our IP & NEMA Ratingsliterature for more information,  or watch our video: Demonstration.

We offer weatherproof touch screens and waterproof stainless steel monitors with a variety of resolutions and aspect ratios for your outdoor signage needs. For instance, 4:3 aspect ratio, 5:4 aspect ratio and 16:9 aspect ratio waterproof monitors are available.  Outdoor displays are used in amusement parks, auto racing, car wash facilities, and mass transit. They have also been deployed for advertising, digital signage, kiosks, sports stadiums and military systems. Outdoor monitors and weatherproof touch screens are a fast-growing segment in today’s outdoor display market. We offer only TAA-Compliant monitors.

TRU-Vu also offers a range of outdoor signage, and weatherproof touch screen and weatherproof stainless steel monitor options for industrial, commercial or residential use.  The SXN Series models are available with 55″ and 65″ screen sizes. With 4K resolution and 500 nits of brightness, video images look great in bright conditions.  Additionally, our SXOBH Series outdoor TV’s represent the top-of-the line performance in outdoor TV technology. They offer a fully-sealed IP 68 enclosure, 2,500 nits of brightness, optical bonding, and an operating temperature of -31° to +140°F. They are completely maintenance-free, with no fans, vents or filters to worry about. The front screen is protected by impact-resistant safety glass with an Anti-Reflective coating. It is rated IK 10, and can withstand a 60 mph fastball!! The SXOBH is available with 55″ and 65″ screens. Outdoor video images have never looked so good!

Apple’s Support website states that using an iOS device in below freezing temperatures might temporarily shorten battery life and could cause the device to turn off.

"We are aware of instances where the iPhone X screen will become temporarily unresponsive to touch after a rapid change to a cold environment," Apple said in a statement given to The Loop .

Affected users may have to wait a few weeks for the fix, as Apple has only just released its latest software update, iOS 11.1.1, to address an autocorrect bug that prevented some users from typing the letter "i".

Laptops are ideal for “at the moment” work, but they can still crack. Particular components of a laptop require special attention and care. It is essential to take good care of the laptop when you take it outdoors. Cold weather has various ways to damage your laptop.

For starters, it can disable the display, and shatter your crash on your hard drive. Warming the laptop too quickly can also lead to serious problems. Laptop owners often ask; how cold can a laptop tolerate? Well, that depends on the make and model.

Other than that, using your laptop in both cold and hot temperatures can have an effect on your laptop. But our main topic is cold. When the winter comes, it is important to consider the impact of cold on your laptop.

We often worry about the heat damaging our devices, but we pay little to no attention to the impacts of cold weather on our devices. The cold weather is just as dangerous as the warm weather. The cold weather can freeze your laptop and destroy its battery within minutes. In most cases, the screen even gets shattered because of the extreme cold.

Furthermore, there is no determining how much cold laptops can tolerate, it depends on the period. The effects of cold weather are just as same as hot weather on laptops. Other than the cold weather being a factor, laptops can also collapse because of carelessness.

Some people might not believe this, but laptops can freeze. The temperature zones really matter. Even laptop cases don’t help in protecting the screen and the internal components. Don’t ever use your laptop while it is kept inside a laptop case. The heat will have no place to go, and chances are, all your memory will be lost.

According to the LaptopsChamp, some particular devices can handle the extreme conditions of weather, but just to be clear and cautious, it is best that you take no chances with your laptop.

Some high-end technology laptops can withstand all kinds of temperature zones subtly, but some are built from average technology which is not always right to keep in the cold weather. However, if you still have to leave your laptop in the cold weather, it is recommended to use a laptop cover or a bag.

Wait a couple of minutes to let the laptop regain its safe temperature. Other than just the cold weather, you should also not leave your laptop in the hot weather. Basically, always have a laptop bag with you wherever you carry the laptop.

The answer is clear; your laptop will not be able to withstand a wide amount of cold. You should always be cautious and treat your laptop with full care.

Whenever you have to travel with your laptop, means when you need to carry it around, you must always put it inside a laptop case. The laptop case should be properly insulated and of high quality.

This way, the cold will be warded off and your laptop will stay as good as new. However, even with the case, it is possible for your laptop to gather moisture and this may lead to damage. That is why; it is best suggested to keep your laptop out of humid areas and damp.

It is always recommended to keep your laptop indoors where the temperature is controlled. Never leave your laptop inside your vehicle or in other places where there are chances of temperature damage. You can’t always rely on the carrying case to be of service, sometimes it doesn’t even work.

When it comes to the component of your laptop; it’s the screen. If the laptop is exposed to the cold for too long, it can freeze the screen, and it might even shatter when you boot the system. This is not just dangerous for the screen, but the pixels can also lose their integrity.

Whenever you are transferring your laptop to a warmer area after it has been in the cold, do not turn it on right away. Wait at least fifteen minutes for the laptop to reach a temperate zone.

Keep in mind; you shouldn’t warm your laptop up by yourself, because that is not appropriate. Using different warming devices will not be helpful; in fact, they will damage your laptop. If you warm up the laptop too quickly, it can shatter your screen and other parts of the laptop.

To avoid any damage, always shut your laptop entirely by turning off all applications and closing tabs. When you shut the laptop, the hard drive retains rest. On the other hand, if you put your laptop on sleep mode, the hard drive will still be running.

This unnecessary movement can cause the hard drive to malfunction, lose data, or get corrupted. If you leave your laptop in the cold by accident, as mentioned above a thousand times, do not boot it until it gets enough time to acclimate. Closing the lid without turning off the laptop is also dangerous.

Well, there is no amount of cold that your laptop can tolerate. Sure, a laptop is an easy investment, but how can you even have it when you can’t take care of it? Buying a laptop comes with great responsibility.

You should be able to take all the required steps needed to take special care of your laptop and make it long-lasting. Keep all of the tips mentioned above and tricks in mind when it comes to avoiding cold weather and managing the maintenance of your laptop. If you take care of the temperature zones, you can protect your laptop from damage.

You’ve left your TV in your unheated garage this winter, and temperatures reached below zero. When you finally return, you’re about to turn on the TV, but something stops you.

If you live in a place with cold, icy winters, it’s best to store your TV inside your heated home, rather than leaving it in your humid, below-freezing garage or basement.

You may already know from middle school physics that materials expand in the heat and contract in the cold. The same philosophy applies to your TV’s internal hardware.

Your TV is made up of delicate and complex logic boards, wires, and other carefully placed metal parts. When frozen, these metal pieces will contract and pull away from each other, which could lead to wires detaching and breaking.

This could completely break your TV and pose a fire hazard when you try to turn it on. If your TV has condensation inside, you may notice water inside the screen.

Fixing water damage on a TV is a complicated process that yields low success rates and often requires you to completely take apart your TV. This is risky if you’re unfamiliar with a TV’s anatomy and you could struggle to put it back together correctly.

This could make tasks like changing the channel or volume quite frustrating and may make it almost impossible to game as the input lag would be too slow.

If you’re thinking of mounting your TV in your garage, it’s best to monitor the temperature and humidity levels to make sure it’s a safe environment for your TV.

This Haozee Smart WiFi Temperature and Humidity Monitor connects to an app on your phone, so you can monitor how cold and humid your garage gets at night without having to get out of bed and check it yourself.

Instead, bring your TV inside your home and let it come back down to room temperature. This will give the metal components time to expand back to their original size. It will also allow any condensation to evaporate.

Extremely cold temperatures could severely damage your TV, leading to hundreds of dollars worth of repairs. In the worst-case scenario, you may even have to purchase a replacement.

Yesenia Achlim is a technical copywriter and editor with a focus on AV equipment. She aims to break down complicated topics and make technology accessible, no matter your technical expertise. When she’s not teaching you how to replace a projector lamp, you can find her reading and baking.

If you plan on filming in a cold environment there are several precautions you must take - the health and safety of your crew being the most paramount. But what other safety measures should you observe? Here are our top ten tips.

It goes without saying you"ll need to be warm. But the art of dressing for extreme cold conditions is slightly more subtle than that. For a start, the choice of clothes depends on whether you are going to be very physically active or standing around a lot. It also depends on whether temperatures are likely to vary considerably. As a general rule, it"s best to have lots of layers. This way you can take them on and off depending on what you are doing and what happens with temperatures.

Sweating can be a problem because you can get very cold when damp. So wearing layers means you can change more easily. Terry Woolf, a filmmaker based in Yellowknife, Canada, says choice of material is important. "When dressing for the cold, wool is the best thing you can use. It retains much of its thermal efficiency even if wet. Down is good but when wet is useless. Fleece is good stuff. Cotton is the worst thing to wear. Loose clothing is better than tight because trapped dead air is your insulator. Wear long underwear. Fleece or wool pants, a good windproof over layer like nylon wind pants etc. (although nylon and gortex stuff gets pretty stiff and makes noise which is bad for sound)."

Having the right body armour is only part of the process. You also need a hat that covers your ears and something for your neck. Terry Woolf uses a wool neck gaiter rather than a scarf, because scarves can get in the way. Boots with good grip and warm lining are crucial. Rubber bottoms are better than plastic. It"s good advice to wear a couple of pairs of socks to keep the heat in (one of them wool). But make sure your boots don"t feel too tight because the cold will transfer from outside to your feet more easily if they are.

Gloves are also critical - but most experts struggle to find gloves that can a) keep their hands warm and b) allow them to operate equipment. Options include Flashpoint Finger Shooting Gloves (which allow you to uncover your fingertips without removing the entire glove) and Isotoner Smartouch Gloves (the kind of gloves that allow you to use touchscreen devices without taking them off). A more standard approach is to wear fingerless gloves and then have a pair of thick mittens to put over them when not filming. One other tip from Woolf is to put chemical hand warmers in your mittens or pockets but "watch them around the gear, they contain salts and if opened could damage things," he warns.

Don"t underestimate the debilitating nature of cold weather. Always stay in shelter when possible, eat well to store up energy and consume warm drinks. Rest is also important. Team leaders need to make sure they aren"t pushing people too hard and are monitoring when people are starting to suffer. Factor in extra time because people work slower in extreme cold conditions. Also be on the look-out for serious conditions like frostbite. If your skin starts to feel numb and hard, don"t panic. But you do need to get out of the cold and warm it up.

Filmmakers tend to cite two issues most frequently. The first is battery preservation. Cotton Coulson and Sisse Brimberg, who have been taking photos for National Geographic magazine for more than three decades, say: “When shooting in below-freezing weather, it is critical to have a fully charged set of batteries, since the cold temperatures can quickly drain them. Should your battery discharge too early, you can extend its life by placing it in a warm pocket, close to your body, to warm it up. Remember to always bring along two batteries: one for the camera and another to keep charging in your cabin or room.”

The other problem that producers encounter in cold conditions is condensation. Director of photography Alister Chapman says: “When you take a very cold camera inside you will get condensation. If the camera is very cold this can freeze on the camera including the glass of the lens. If there is condensation on the outside of the camera, there will also be condensation inside and this can kill your camera. To prevent or reduce condensation, place the camera in a large ziplock bag before taking it inside. Then allow the camera to warm up to the ambient temperature before removing it from the bag.” [Some other film-makers use see-through plastic garbage sacks].

Chapman also says you can leave your camera outside to avoid condensation but not if it gets below minus 25 degrees Celsius because “you risk the LCD panel freezing and cracking. Very often in cold regions houses will have an unheated reception room or porch. This is a good place to store you camera rather than taking it inside into the warm. Repeatedly taking a camera from cold to warm without taking precautions against condensation will shorten the life of your camera.”

“If you can, leave the camera on between shots. The camera generates some heat internally and this will prevent many issues.” Some experts says film-makers should use “ lithium, nicad, or nickel metal hydride batteries, which function well in the cold”. But Chapman’s view is that Nicads or NiMh batteries are "all but useless" below freezing.

The other kit issue that can cause headaches is how to protect lenses. Most filmmakers advise taking a paintbrush to wipe off slush or snow if it gets on the lens (or any other equipment for that matter). Don’t blow snow off the lens because this can cause moisture to freeze on it. Better to use a paintbrush or cloth to do this.

You also need to be thinking about protective devices such as a rubber lens hood and a rain/falling snow cover. In general, the best advice is not to change lenses outside unless absolutely essential. Even carrying or changing lenses beneath your coat can create a condensation problem.

As for tripods, some filmmakers advise that lightweight versions aren’t very good in extreme cold conditions. If you have to use them, keep the legs as short as possible.

This seems to contradict the tripod advice above. But as far as possible don’t take too much stuff. It’s probably going to increase costs, because you’ll need more vehicles and/or porters. And you’ll increase the risk of damage. Worst of all, messing around with kit might mean you miss the big shot. If you do have to take a lot of kit, don’t skimp on vehicles, drivers and porters because you need to make sure your crew members aren’t burdened by non-essential jobs [though ultimately these are judgment calls based on budgets].

Some kit can get brittle in cold weather, either losing its flexibility or snapping. Woolf says: “Watch your cables. Most of them are plastic and will become very brittle. There is a cold-weather mic cable out there from Canare.”

Referring to the previous section, also note that snow/rain covers can get brittle. Look for specially-designed products. Tripods can also experience issues. If outside in very low temperatures for extended periods, the grease in the tripod may freeze. Companies like Vinten can winterise the tripod by replacing normal grease with arctic grease.

Terry Woolf says: “If you are working in mine buildings or truck stops remember a lot of them have nylon carpets and this is a very arid environment. Walking down the hall can build a hefty static charge. Watch your gear. If it’s very static-y I find holding a key or some kind of metal in my hand and discharging it against something neutral before touching the gear helps.”

Any extreme adventure requires good emergency planning. It’s important to undertake a thorough risk assessment when planning your shoot. This will be needed in order to adequately insure your crew and equipment. Your location scout or manager should have a solid knowledge of the risks involved in filming in their chosen area. This includes access and evacuation routes, where medical facilities are located and how to access them.

Larger productions should have their own medic with them on location and it would also be useful to ensure other members of crew are trained in basic first aid. All crew should be briefed on how to keep themselves safe and healthy during filming. The key message is to be prepared for every possible eventuality because conditions change quickly. Keep in mind also that equipment like generators, mobile or satellite phones and radios may also be adversely affected by the weather. Think in advance about how to resolve this.

You don’t want anything to stop your shoot. And you don’t want to show any signs of ignorance. But don’t be so stubborn that you ignore advice. Local knowledge can be invaluable in helping to plan a safe and efficient shooting schedule. Heed warnings from guides, their advice could be crucial to maintaining your crew’s safety. Be prepared to use local specialists if confronted by complex or treacherous conditions.

I had dropped my Surface down a small flight of stairs while it was in a protective sleeve. It had a crack down the right side of the screen and the screen still functioned, but the digitizer was messed up for touch on about half of the screen.

It is actually quite easy to open the surface (as long as you don"t mind breaking the screen). If you are trying to open your surface pro and replace the screen it is quite easy to apply a heat gun to the border of the screen and remove the screen, but you will almost definitely break or crack the screen if you move too quickly.

If you are trying to save the screen and re-attach it is a NIGHTMARE.In other words, if you are replacing the screen it is easy, but if you are trying to open it and replace a hard drive, battery, or another part and then re-apply the same screen, then it is quite difficult.

If you have to open it, you might as well spend $60-100 buying a cheap surface pro screen (+digitizer) on ebay and just replacing the screen+digitizer when you take it apart.

Now, if you are EXTREMELY careful you can remove the surface screen without damaging it. I DID accomplish this, but I spent better half of a day applying heat to the bezel, using ONLY plastic spudges, guitar picks, and other plastic tools to ever so slightly remove the screen from the bezel over time. It took a lot of heat and patience to do this, but took about 8 hours overall.

I just had to remove the screen and get data off the microSSD, so I have seen youtube videos of using some 3M adhesive tape being used to replace the adhesive to reassemble the screen, but I just ended up using the surface for parts.

Let me know if you have any questions. If you think you can separate the screen form the bezel without cracking the screen I say go ahead and try. I did it, and I think if you are really patient you can do it. I used a painters heat gun from Lowe"s or home Depot ($40) to get the job done. That was the best tool for the job.

I"m the one that started the thread that SIKSUKR refers to. I had 2 Samsung 40" LCD TV"s. Below is what I found. I"ve had no problems at all. I do put a wool blanket over the TVs when closing down and I do wait for operating temp to turn on when going up in cold weather.

Samsung TVs can operate safely in rooms or areas in which temperatures range from 50� F to 104� F (10� C to 40� C). Temperatures outside the listed range will negatively affect the operation of your TV.

Samsung TVs can be stored unused at temperatures ranging from -4� to 113� Fahrenheit (-20� to 45� Centigrade). Storing your TV at temperatures outside this range can damage your TV.