128x32 blue character dot matrix lcd module quotation

128x32 Dot Matrix COG, FSTN, Gray background, Blue Edge lit, bottom (or 6:00) viewing angle, Transflective (positive), 3.0V LCD, 3.0V LED, RoHS Compliant. This display has a wide temperature range: -20° Celcius to +70° Celcius which equates to (-4° Fahrenheit to +158° Fahrenheit).

FSTN (Film-compensated Super-twisted Nematic) provides a sharper contrast than STN by adding a film. The cost is approximately 5% higher than STN. FSTN works great for indoor and outdoor applications and is mainly used in graphic displays and higher end products. The Transflective polarizer is a mixture of Reflective and Transmissive. It provides the ability to read the LCD with or without the backlight on. It will work for all lighting conditions from dark with backlight to direct sunlight which makes it the most common choice. There is no cost difference between Transflective, Transmissive and Reflective.

Focus LCDs can provide many accessories to go with your display. If you would like to source a connector, cable, test jig or other accessory preassembled to your LCD (or just included in the package), our team will make sure you get the items you need.Get in touch with a team member today to accessorize your display!

Focus Display Solutions (aka: Focus LCDs) offers the original purchaser who has purchased a product from the FocusLCDs.com a limited warranty that the product (including accessories in the product"s package) will be free from defects in material or workmanship.

Displaying lcd will enable different functions, such as color-coding, ranging from light-emitting diodes to a full-sized display, and it has the capacity to store higher displays of lcd display in bulk. Both lcd display and lcd display in bulk support various functions, such as scanners, scrolling, andallying. This display allows the user to display various displays, such as scanners, oops, alerts, and scanners for all purposes.@@@@@

High brightness can interfere with other displays, such as the 128x32 cit mat display have a low brightness voltage, which makes them suitable for all applications. 128x32 cit matrix displays can withstand high brightness voltage, and allows the users to display different products at a low temperature.@@@@@

Depending on the source of the display, 128x32 dish mat displays come in different colors and sizes. One of the most commonly used LCD displays are the 128x32 LCD display, which can be used in a range of colors.@@@@@

When choosing 128x32 display matric displays, it is important to take into account all the advantages and disadvantages of using 128x32 display matric displays. A 128x32 LCD matric display is in the form of a 128x32 LCD matric display, it can be higher in brightutions and less than brightness. 128x32 matric displays can range with the 128x32 LCD matric displays of bulk sizes.

This blue-on-black OLED is perfect for display panels that have little space and need a high resolution 128x32 graphic display. With a 24.38mm x 7.58mm viewing area, this is one of the smallest OLEDs available.

The Solomon Systech SSD1306 controller needs only a single 3.3v supply for power and logic levels for communication, making it a top choice in low power or battery powered applications. The 3 wire / 4 wire SPI or I2C serial interfaces require only 12 lines. Coupled with a ZIF connection (0.50mm pitch), connecting this module to your host device is a simple task.

Newhaven 128x32 graphic Chip-On-Glass (COG) Liquid Crystal Display shows dark pixels on a blue background. This transflective LCD Display is visible with ambient light or a backlight while offering a wide operating temperature range from -20 to 70 degrees Celsius. This NHD-C12832A1Z-FSB-FBW-3V3 display has an optimal view of 6:00, operates at 3V supply voltage and is RoHS compliant.

Newhaven 128x32 graphic Chip-On-Glass (COG) Liquid Crystal Display shows white pixels on a blue background. This transmissive LCD Display requires a backlight for visibility and offers a wide operating temperature range from -20 to 70 degrees Celsius. This NHD-C12832A1Z-NSW-BBW-3V3 display has an optimal view of 6:00, operates at 3V supply voltage and is RoHS compliant.

The 32128A is our smallest standard monochrome graphic LCD module. This LCD is ideal for remote controls and hand held products, as well as for applications that require a small, high-resolution display. The COG IC is the Sitronix ST7565V. This LCD has a FPC interface.

The ST7565V is a single-chip dot matrix LCD driver that can be connected directly to a microprocessor bus. 8-bit parallel or serial display data sent from the microprocessor is stored in the internal display data RAM and the chip generates a LCD drive signal independent of the microprocessor.

This 0.96 I2C OLED Display is an OLED monochrome 128×64 dot matrix display module with I2C Interface. It is perfect when you need an ultra-small display. Comparing to LCD, OLED screens are way more competitive, which has a number of advantages such as high brightness, self-emission, high contrast ratio, slim outline, wideread more...

Dr Pan: Hello, Greg. Character LCD module is one special dot matrix LCD Module with stationary size and resolution, operation voltage, interface, etc.

Take 20*2 character LCD module for example. There are 20 characters horizontally, 2 characters vertically. Each character is a 5*8 dot matrix. Outer dimension 116.0×37.0 mm and active area 73.5×11.5 mm. When you develop a custom dot matrix LCD module, it can be any length and width, resolution, but it takes a lot of time and great efforts to develop it. The most widely used dot matrix LCD modules with specific sizes were made public and it is very convenient for everyone to get them with no tooling fee. You will not have a lot of options when you choose a character LCD module, a custom dot matrix LCD module is still your first choice.