is tft lcd a captive touch screen manufacturer

Take your product to the next level with a capacitive touch screen LCD by Displaytech. Our PCAP (projected capacitive) touch screen technology is a premium alternative to a resistive touchscreen. We offer capacitive touchscreens for our 2.8-inch, 3.5-inch, 4.3-inch, 5-inch and 7-inch TFT LCD displays.

Capacitive touch technology allows for an enhanced product user interface since it supports gestures and proximity sensing. Unlike resistive touch screens which rely on pressure, capacitive touch responds to an electric current and can handle multi-finger touch points. This means that capacitive touchscreens can be used with your bare finger and it supports gestures such as pinch-to-zoom or swipe.

The capacitive touch screen is not an actual screen, but a component that is mounted on top of the LCD screen. The capacitive screen is a transparent piece of tempered glass in appearance.

A capacitive touchscreen is a type of touchscreen that is as transparent as glass and does not display any content or glow, it is used to sense the user"s touch actions.

The TFT screen is the real screen. TFT is the most widely used kind of liquid crystal display material, mainly used in the field of low-end display, mobile phone application.

Among the current mobile phones, usually use both kinds of screen, the two overlap together, the TFT LCD screen is responsible for displaying images, while the capacitive touch screen is responsible for sensing the user"s operation, which is the origin of the "internal screen", "external screen".

Capacitance screen and resistance screen refer to the transparent and very thin touch film on the surface of mobile phone LCD screen. If that film belongs to capacitive touch layer, then such LCD screen is called capacitive screen; otherwise it is called resistance screen; the same LCD screen can be made into capacitive screen, also can be made into resistance screen. So what"s the difference between capacitive touch screen and TFT LCD screen?

Capacitive touch screen is not a real screen, but a component installed on the top of the LCD screen. The capacitive screen is a transparent toughened glass in appearance.

Capacitive touch screen is a kind of touch screen. It is transparent like glass, it does not display any content and does not emit light. Its function is to perceive user"s touch operation.

TFT screen is the real screen. TFT is one of the most widely used materials for LCD display, which is mainly used in low and middle-end display field, and is widely used in mobile phones. TFT LCD screen is a thin film transistor LCD screen. It is a kind of display screen. It has no touch sensing function and can only be used to display images.

Current mobile phones usually use both screens at the same time. They overlap up and down. TFT LCD screen is responsible for displaying images, while capacitive touch screen is responsible for perceiving user operation. This is the origin of "inner screen" and "outer screen".

What"s the difference between capacitive touch screen and TFT LCD screen? Do you understand? Sidico Technology Co., Ltd. is engaged in the research, production and sales of 8.8 inch strip LCD screen and industrial LCD screen. It provides TFT LCD screen, customized LCD screen and excellent strip LCD screen manufacturer for industrial LCD screen.

The capacitive touch screen is stacked on the tft lcd display, there are two ways to make it, one is frame bonding, another one is optical bonding. the frame bonding means the capacitive touch screen attached on the tft screen by the double glue tapes via the lcd frame on the four sides. the optical bonding means the full lamination about the capacitive touch screen and tft lcd screen, that is the lamination is via OCA glue, and full lamination about the capacitive touch panel and tft lcd screen.

Projected capacitive touch (PCT) technology is a capacitive technology which allows more accurate and flexible operation, byetchingthe conductive layer. AnX-Y gridis formed either by etching one layer to form a grid pattern ofelectrodes, or by etching two separate, parallel layers of conductive material with perpendicular lines or tracks to form the grid; comparable to thepixelgrid found in manyliquid crystal displays(LCD).

Ais not a real display screen, but a component that is mounted above the LCD screen. The capacitive touch panel is a transparent tempered glass in appearance.

A capacitive touch panel is a touch panel that is transparent like glass and does not display anything or emit light.Thecapacitive touch panelfunction is to sense the user"s touch operation.

The TFT screen is the real display screen. TFT is the most widely used liquid crystal display material.The TFT LCD screen is a thin film transistor liquid crystal screen, which is a display screen, and has no function of sensing touch, and can only be used to display an image.

In the current display screen, two types of screens, a capacitive touch panel, and a, are usually used at the same time, and the two are vertically overlapped, and the TFT LCD panel is responsible for displaying images, and the capacitive touch screen is responsible for sensing user operations. It is the origin of "internal screen" and "outer screen".

Capacitive touchscreen TFT LCDs are available in 2.8", 3.5", 4.3", 5.0", 7.0", and 10.1" diagonal sizes. Capacitive touch TFTs offer excellent contrast and clarity, have a built-in I2C interface, excellent dragging performance, and accept multi-point inputs, also known as multi-touch.

If your applications require a wider viewing angle, Winstar O Film TFT technology will be what you need. There are many wider view angle technology for TFT displays in the market such as MVA (Multi-domain Vertical Alignment) and IPS (In-Plane Switching). Comparing to the MVA or IPS technology, O Film TFT has the advantage of pricing.

Most industrial application of TFT-LCD glasses that are available in the market are TN-LCD type. However, TN technology suffers from phenomenon called gray scale inversion. This means the display have one viewing side in which color of the image change suddenly after exceeding specified view angle. Therefore, the normal TFT models we offer which the viewing angle are limited. Currently, we offer a solution to enhance TN glass viewing angle and can overcome gray scale inversion. This is our TFT O-Film solution.

The modle of WF43VTZAEDNGA is a standard 4.3 inch O Film TFT LCD Capacitive Touchscreen Display which with a wide view angle solution. Winstar offers a wider view angle solution for our TFT product line. We add an O Film on top of the TFT TN-LCD glass to enhance the viewing angle. This will be a cost effectiveness solution in the industrial application for color TFT displays to enhance the view angle.

Capacitive touch screen technologyUSES the human body’s current induction to work. The capacitive touch screen is a four-layer composite glass screen. The inner surface of the glass screen and the interlayer are coated with one layer of ITO respectively. The outermost layer is a thin layer of silica soil glass protective layer. When the finger touches the metal layer, the user and the touch screen surface form a coupling capacitor due to the electric field in the human body.

The capacitor is a direct conductor to the high-frequency current, so the finger sucks a small current away from the contact point. The current flows from the electrodes at the four corners of the touch screen respectively, and the current flowing through the four electrodes is proportional to the distance from the fingers to the four corners. The controller calculates the precise proportion of the four currents to get the position of the touchpoint.

In order to realize multi-touch on a capacitive screen, it is necessary to add electrodes of mutual capacitance. In a simple words, it is to divide the screen into blocks and set a group of mutual capacitance modules in each area to work independently. Therefore, the capacitive screen can independently detect the touch situation of each area and simply realize multi-touch after processing.

Capacity Touch Panel USES the current induction of the human body to work. The capacitive screen is a four-layer composite glass screen. The inner surface of the glass screen and the interlayer are coated with ITO (indium sikgold oxide nano). The outermost layer is a protective layer of silica glass with a thickness of 0.0015mm.

Whena user capacitive touch screen, the electric field due to the human body, your fingers and face form a coupling capacitance, because the working plane to have a high-frequency signal, so the fingers on a very small current, respectively from the current screen in the four corners of the electrode, and theoretically through the four electrodes with the finger to the four corners of the current is proportional to the distance, the controller through the precise calculation of the four current ratio, it is concluded that location. It can achieve 99% accuracy, with a response speed of less than 3ms.

Projective capacitive touch screens etch different ITO conductive circuit modules on two layers of ITO conductive glass coatings. The etched patterns on the two modules are perpendicular to each other and can be thought of as sliders with continuous changes in X and Y directions. As the X and Y architectures are on different surfaces, their intersection forms a capacitor node. One slider can be used as the drive wire and the other as the detection wire. When a current passes through one of the wires in the drive wire, if there is a signal of a change in the capacitance outside, it will cause a change in the capacitance node on the other layer of wire. The change in capacitance can be detected by measuring the electrical circuit connected to it, and then converted to A digital signal by A/D controller, which can be processed by A computer to obtain the (X, Y) axis position, so as to achieve the positioning target.

During operation, the controller successively supplies power to the driving wire, thus forming a specific electric field between each node and the wire. Then scan the sensor line one by one to measure the capacitance change between the electrodes so as to achieve multi-point positioning. When the finger or touch medium is close, the controller can quickly detect the change of capacitance between the touch node and the wire, and then confirm the position of the touch.

One axis is driven by a set of AC signals, and the response across the touch screen is measured by electrodes on the other axis. Users call this’ transversal ‘sensing or projective sensing. The sensor is plated with the ITO pattern of the X and Y-axis. When the finger touches the touch screen surface, the capacitance under the touchpoint increases according to the distance of the touchpoint. The continuous scanning on the sensor detects the change of capacitance value, and the control chip calculates the touchpoint and returns it to the processor.

Commonly used is the surface capacitive touch screen, which works in simple principle, low price, simple circuit design, but difficult to achieve multi-touch.

Projective capacitive touch screens are multi-finger touch. These two capacitive touch screens have the advantages of high light transmittance, fast response speed, and long life, etc. The disadvantages are: with the change of temperature and humidity, the capacitance value will change, resulting in poor work stability, often drift phenomenon, need to frequently proofread the screen, and can not wear ordinary gloves for touch positioning.

The projected capacitive touch screen can be divided into the capacitance and mutual capacitance screen two types, one of the more common mutual capacitance screen as an example, the internal electrode and receiving electrode by the driver, drive electrode signal low voltage high frequency projected onto the receiving electrode form stable current, when human exposure to the capacitance screen, earth due to the human body, fingers and capacitance screen to form an equivalent capacitance, and the high-frequency signal by the equivalent capacitance into the ground, in this way, the receiver receives charge is reduced, when fingers near the transmitter, electric charge, the more significant, according to the receiving end receives the current strength of to determine the touchpoint.

Arrays of transverse and longitudinal electrodes are made from ITO on the surface of the glass. These transverse and longitudinal electrodes form capacitors with the ground respectively. This capacitor is commonly referred to as self-capacitance, that is, the capacitance of the electrode to the ground. When the finger touches the capacitive screen, the capacitance of the finger will be superimposed on the capacitance of the screen, thus increasing the capacitance of the screen.

During touch detection, the horizontal and longitudinal electrode arrays are respectively detected from the capacitive screen. According to the changes of capacitance before and aftertouch, the horizontal coordinates and longitudinal coordinates are determined respectively, and then the touch coordinates of the plane are combined. The scanning method of self-capacitance is equivalent to projecting the touchpoints on the touch screen to the X-axis and Y-axis directions respectively, and then calculating the coordinates in the X-axis and Y-axis directions respectively, and finally combining them into the coordinates of the touchpoints.

If it is a single touch, the projection in the X and Y direction is unique, and the combined coordinates are unique. If there are two touches on the touch screen and the two touches are not in the same X direction or the same Y direction, then there are two projections in the X and Y direction respectively, and the combined coordinates are 4.Apparently, only two of the coordinates are real, and the other two are known as ghost points. Therefore, self – the capacitive screen can not achieve true multi-touch.

The mutual capacitor screen also USES ITO to make the transverse electrode and the longitudinal electrode on the glass surface. The difference between it and the self-capacitor screen is that the place where the two groups of electrodes cross will form a capacitor, that is, the two groups of electrodes form the electrodes of the capacitor respectively. When a finger touches a capacitive screen, the coupling between two electrodes near the touchpoint is affected, thus changing the capacitance between the two electrodes.

When the mutual capacitance is detected, the transverse electrode will send out excitation signals successively, and all the longitudinal electrodes will receive signals at the same time. In this way, the capacitance value of all the intersection points of the transverse and longitudinal electrodes can be obtained, that is, the capacitance value of the entire two-dimensional surface of the touch screen. The coordinates of each touchpoint can be calculated according to the two-dimensional capacitance variation data of the touch screen. Therefore, even if there are multiple touchpoints on the screen, the actual coordinates of each touchpoint can be calculated.

The advantage of the mutual capacitive screen is less wiring, and can simultaneously identify and distinguish the difference between multiple contacts since the capacitive screen can also sense multiple contacts, but because the signal itself is fuzzy, so can’t distinguish. In addition, the induction scheme of the mutual capacitive screen has the advantages of fast speed and low power consumption, because it can measure all the nodes in a driveline at the same time, thus reducing the number of acquisition cycles by 50%. The dual-electrode structure has the function of self-shielding external noise and can improve signal stability at a certain power level.

In any case, the touch position is determined by measuring the distribution of signal changes between the X and Y electrodes, and a mathematical algorithm is then used to process the changed signal levels to determine the XY coordinates of the touchpoint.

•   Capacitive schemes last longer because the components in the capacitive touch screen do not need to move at all. In a resistive touch screen, the top layer of the ITO film needs to be thin enough to be elastic so that it bends down and touches the bottom layer of the ITO film.

•   The choice of capacitor or resistor depends largely on the object touching the screen. If it is a finger touch, the capacitive touch screen is a better choice. If a stylus is needed, whether plastic or metal, a resistive touch screen will do. A capacitive touch screen can also use a stylus but requires a special stylus to work with it.

•   Surface capacitances can be used for large touch screens and are relatively low, but they currently do not support gesture recognition: inductive capacitances are mainly used for small and medium-sized touch screens and can support gesture recognition.

•   Capacitive technology is wear-resistant, has a long service life, and has low maintenance costs when users use it, so the overall operating costs of manufacturers can be further reduced.

•   Capacitive touch screens are designed to support multi-touch technology and are less responsive and less prone to wear and tear than resistive touch screens.

STONE provides a full range of 3.5 inches to 15.1 inches of small and medium-size standard quasi TFT LCD module, LCD display, TFT display module, display industry, industrial LCD screen, under the sunlight visually highlight TFT LCD display, industrial custom TFT screen, TFT LCD screen-wide temperature, industrial TFT LCD screen, touch screen industry. The TFT LCD module is very suitable for industrial control equipment, medical instruments, POS system, electronic consumer products, vehicles, and other products.

Touchscreens have changed the way people expect to interact with their devices. When it comes to smartphones and tablets, touch is the way to go. Even handheld game consoles, laptops, and car navigation systems are moving towards touch. Manufacturers of these devices need to give their respective consumers the responsiveness these consumers are looking for. Selecting the right TFT-LCD display to use for different devices is important.

For touch-sensitive displays, two types of technologies are used: resistive and capacitive. The main difference is in how they respond to touch. Mobile phone comparison site Omio indicates that resistive technology is more accurate but capacitive technology is more responsive.

To elaborate on that, resistive touchscreens allow input from fingers and non-finger objects, like a stylus. A stylus has a smaller point than a finger and makes interaction on a resistive screen more accurate. This makes the technology suitable for devices whose applications require high accuracy, like sketching and pinpoint games. Mobile devices that use a stylus typically have resistive touchscreens.

Capacitive touchscreens, on the other hand, offer more responsiveness with better optical clarity and multi-touch performance. They detect more complex finger gestures. These qualities are shown to be more important for general interaction so it’s more dominant in smartphones and tablets, as well as in other devices with small to medium screen sizes.

As you can see, capacitive screens get general usage while resistive screens cater to more specific applications. With this, TFT-LCD module manufacturers, like Microtips Technology, focus on continuously improving capacitive screen technology.

Electronic Design states that many technological advances can be used to integrate touch sensors directly into the display. In some, manufacturers stack-up the touch sensors and integrate the controller with the display driver ICs. These advances allowed thinner and smarter capacitive touchscreens – a trend that you see in many devices today. For example, Windows phones originally worked exclusively with resistive touchscreen technology but later on moved over to capacitive. If the continuous development of capacitive touchscreen technology becomes successful, these screens may soon have abilities they don’t possess at the moment, such as hover support, non-finger support, and many more.

Different bonding: air bonding; OCA (Optically Clear Adhesives, 0.175-0.2mm), OCR ( Optically Clear Resin 0.3-0.5mm); TOCA (Thermal-melt optical clear adhesive, 0.2-2.0mm).

Different kinds of cover lens: Chemically Strengthened Soda Lime Glass; Dragontrail Glass; Gorilla Glass, Plastic(PMMA/PC), Curve and flexible cover lens with different thickness . Glass sensor thickness: 0.4/0.5/0.7/1.1mm. Plastic cover lens: 0.6/1.0/1.5/1.8/2.0/2.5/3.0mm; Glass cover lens: from 0.5mm to 15mm.

TFT Display modules with Capacitive Touch Screen are more user-friendly and have better performance compared with the ones with Resistive Touch Screen. There are many combinations of TFT display modules with projected capacitive touchscreen (PCAP) for you to choose from. We offer modules with various features including modules with control board, wide viewing angle, sunlight readable, wide temperature, and Monochrome. The available sizes are 0.96", 3.5", 3.9", 4.3", 5", 5.2" 5.7", 7" and 10.1"

RFF70AB2-AIH-DNG is a 7-inch TFT LCD display with capacitive touch screen. Built-in HX8264-E and HX8664-B driver ICs support 24 bit RGB interface, and also, the module has built-in DC to DC function. The contrast ratio of the module is 800:1 (typical value), the brightness is 700 nits (typical value), and the aspect ratio is 16:9. RFF70AB2 series and RFF700Y series are compatible. If you’ve already used our RFF700Y series, you can give this new RFF70AB2 series a try.

DISEN Electronics Co., Ltd. established in 2020, it is a professional LCD display, Touch panel and Display touch integrate solutions manufacturer who specializes in R&D, manufacturing and marketing standard and customized LCD and touch products. Our products include TFT LCD panel, TFT LCD module with capacitive and resistive touchscreen (support optical bonding and air bonding), and LCD controller board and touch controller board, industrial display, medical display solution, industrial PC solution, custom display solution, PCB board and controller board solution.

The capacitive touch screen can be simply viewed as a screen composed of four layers of composite screens:the outermost layer is a protective glass layer,followed by a conductive layer, the third layer is a non-conductive glass screen, and the fourth innermost layer It is also a conductive layer. The innermost conductive layer is the shielding layer,which plays the role of shielding the internal electrical signals. The middle conductive layer is the key part of the entire touch screen. There are direct leads on the four corners or sides to detect the position of the touch point. Capacitive screens use the current induction of the human body to work. When a finger touches the metal layer, due to the electric field of the human body, a coupling capacitor is formed between the user and the touch screen surface. For high-frequency current, the capacitor is a direct conductor, so the finger draws a small current from the contact point. This current flows from the electrodes on the four corners of the touch screen, and the current flowing through these four electrodes is proportional to the distance from the finger to the four corners. The controller obtains the position of the touch point by accurately calculating the ratio of these four currents.

RV013Z1P-300-26 is a small size square 1.3 inch LCD display panel, the interface and brightness acceptable for customized, It is a transmissive type display operating in the normal white. This TFT-LCD has a 1.3 inch diagonally measured active area with QVGA resolutions (240 horizontal by 240 vertical pixel array).

A1: We are a high-tech manufacturer, which provide one-stop LCD solution, in the technology side, We pursue the continuous update and development of LCD technology, and have obtained a number of technology patent-certificates.

A2: The products can be widely applied to the fields of HMI, Handheld Terminals, Medical Equipment, Instruments and Apparatus, Smart Home Equipment, Shopping Machine, Vehicle Display and AOI, etc.

A5: Our stocks are mainly raw materials or semi-finished(LCD module), usually after payment, we will send it within 3 days, if you need custom and buy large quantity, the delivery time about 4-7 weeks after you confirm the sample.

A7: Sample package with PP bag and carton box, Bulk production package with PP bag +Foam + Carton box + Wooden frame, all packages are protected by outer box and strapping to ensure the safety of material transportation.

ER-TFT043A2-3 is 480x272 dots 4.3" color tft lcd module display with driver IC ST7282 and optional capacitive touch panel with controller and connector,optional 4-wire resistive touch panel with connector,superior display quality,wide view angle and easily controlled by MCU such as 8051, PIC, AVR, ARDUINO,ARM and Raspberry PI .

It can be used in any embedded systems,car,mp4,gps,industrial device,security and hand-held equipment which requires display in high quality and colorful image.It supports rgb interface. FPC with zif connector is easily to assemble or remove.Of course, we wouldn"t just leave you with a datasheet and a "good luck!".Here is the link for 4.3"TFT Touch Shield with Libraries, Examples.Schematic Diagram for Arduino Due,Mega 2560,Uno and 8051 Microcontroller Development Board&Kit.

TFT touch screen display set a semiconductor switch for each pixel, and each pixel can be directly controlled by point pulse. Therefore, each node is relatively independent and can be controlled continuously. It can not only improve the response speed of TFT touch screen display, but also accurately control the display color level of the TFT touch panel. Therefore, the color of TFT touch screen display is more true. TFT display touch screen has excellent color saturation, restore ability and higher contrast.

Kingtech Diaplay, as one of LCD screen manufacturers, can custom LCD screens according to your needs. We promoise that we will provide the customers with qualified products and satisfying one-stop services. Any requests will be welcomed.

Capacitive touch screen is not a real screen, but a component, which is installed on the top of the LCD screen. The capacitor screen is a transparent tempered glass in appearance. Moreover, the two can not be compared horizontally, because they are not the same kind of parts. Most mobile phones have both screens. Capacitive touch screen is a kind of touch screen. TFT capacitive is as transparent as glass, which will not display anything and will not glow. The function of TFT capacitive touch screen is to sense the user"s touch operation.

TFT touch screen display is the real screen. TFT is the most widely used liquid crystal display material, which is mainly used in the low-end display field, and more used in mobile phones. TFT touch screen display is a thin film transistor liquid crystal screen, a kind of display. At present, mobile phones usually use these two screens at the same time. The two are overlapped up and down, and the TFT touch screen display is used to display the image. The capacitive touch screen is used to sense user operation, which is the origin of "internal screen" and "external screen".

The 3.5 inch RPI lcd display TFT Capacitive Touch Screen is a display module can be applied to Raspberry pi 3 B+ Pi Zero etc. It can be used as raspberry pi x window display terminals.

The RPI LCD Display TFT Capacity Touch Screen Modules used 28 pins out of raspberry pi 40 pin. When installing the module attention to align the first leg of the raspberry pi and LCD module.