pedego lcd display quotation

When you turn on the Pedego display (which can be done by single pressing the power button), you come across your first screen. This is your main display. At the top of the screen, there is your speedometer. Immediately underneath is the battery charge. Underneath that, there is a trip meter, riding time, and odometer (they can be switched by single pressing the "set" button). To the left of the screen is the pedal assist level (which will always start at 0 and can be increased or decreased by pressing the plus and minus buttons).

Turn on your Pedego display by single pressing the power button. Press and hold the set button (underneath the power button) until it becomes backlit. There are different settings.

If your bike display is not on, single press the power button. Once you are on the main riding screen, single press the power button again. The screen will light up, and this will activate both your head and tailight.

Single press your power button to turn on the display. If there is a flashing error message next to the battery indicator, then you should call the Pedego Tech Support at 800-646-8604 or your local Pedego dealer. If you purchased your bike through Electric Bike Place or MACkite, please call 800-622-4655.

Turn on your display. To activate the USB port, press the "set" and plus button for 3 seconds until you see the USB icon. You can then remove the rubber cover and insert your USB cable into the bottom of your display.

Turn on your display. Press the "set" button until the screen is backlit. Press "set" until you reach level 6. When your indicator is set to "on", then your throttle will be unregulated. Press the plus or minus button to regulate your throttle output to walking speed. Hold the "set" button to save your changes.

Turn on the display. On your screen, you will notice a "BMS". Select Pedego models have battery communication. You can see your type of battery communication above the battery indicator.

Turn on the display. Press and hold the "set" button until it becomes backlit. Single press the "set" button two times. "Set 3" will be the wheel size. You can press the plus or minus button to increase or decrease your wheel size. To save, press and hold the "set" key.

Turn on the display. Press the "set" button until it becomes backlit. Next, single press the "set" button three times until you reach "Set 4". To change between MPH and KPH, single press the plus or minus key. Once you have chosen your preference, hold the "set" button to save your changes.

Pedego electric bikes are equipped with an LCD console that monitors your pedal assist level, speed, odometer, trip distance, riding time, and battery energy level. If you have purchased your electric bicycle from a Pedego dealer or via the official Pedego website, your ebike will arrive with all the correct LCD console settings, such as km/hr settings and a maximum motor speed of 32 km/hr. In this article, we list the different numbers and symbols, what they mean, and how to change certain settings on your electric bike.

It’s easy to turn the LCD console on. First, make sure the battery is fully inserted and the on/off switch is in the on or [I] position. Then press the power button (top button) on the four button selector located near the left grip on the handlebars. To turn off the LCD screen completely, press and hold the power button for three seconds. The console will also automatically turn off after five minutes of bike inactivity.

Pedal Assist Number: The large number on the left of your screen. The higher the number, the more energy the motor is exerting to propel you forward while you pedal. On most Pedego bikes there are 6 levels of pedal assist. In Level 0 the motor will not be activated by either throttle or pedal assist for most Pedegos. Levels 1-5 give you increasing levels of power (and top motor-assisted speed) while pedalling. Note that in these levels, the throttle acts as an override and can be activated to increase the power temporarily up to the maximum km/hr speed as required. Level 6 is a throttle-only setting and pedalling does not activate the motor. Pedal assist power can be adjusted while riding: simply hit the plus [+] button to increase power or the minus [-] button to decrease the amount of power the electric motor is applying to the wheel when you are pedalling.

To turn on the screen’s backlight as well as the integrated front and rear lights on your Pedego, once the LCD screen is on, simply press the power button and the lights will come on. Press it once again to turn them off. (Pressing the power button for longer than three seconds will turn the entire LCD unit off.)

There are other functions your LCD console can perform. By pressing and holding the “SET” button for a couple of seconds, located just below the power button, you’ll enter the programming menus. Here are the explanations for each screen and how they function.

After you’ve powered on the LCD screen, hold the “SET” button for two seconds. The screen will become backlit and you can release the button. You’ll see the number 1 in the bottom left corner. You’ll also see the trip odometer figure and here is where you can reset it back to zero by simply pressing the minus [-] button. This is useful to determine how long a particular ride is or how much battery power is used over a particular distance. To reset the trip odometer to zero, hold “SET” again for two seconds to exit the setup interface.

This should have been set when you purchased the bike. After powering on the LCD screen, hold the “SET” button for two seconds. The screen will become backlit (release the button at this point) and you’ll see the number 1 in the bottom left corner. Press the set button twice, and you’ll see a number 3 in the bottom left corner. If your electric bike has 28-inch tires, the number on this screen will read 28. You can toggle between all the sizes by pressing the minus [-] button. Hold “SET” again for two seconds to exit the setup interface.

Again, if your electric bike was purchased in Canada, the LCD console will already be set to kilometres per hour. To change between MPH and KPH, power on the LCD screen and hold the “SET” button for two seconds. The screen will become backlit (release the button at this point) and you’ll see the number 1 in the bottom left corner. Press the set button three times and you’ll see a number 4 in the bottom left corner. To toggle between MPH and KPH, press the plus [+] or minus [-] button. You can also use this function to determine whether you’re eligible to receive Mile Marker pins. (Check about this with your local Pedego store!) Hold “SET” again for two seconds to exit the setup interface.

To engage the pedal assist limiter, or to turn it off, power on the LCD screen and hold the “SET” button for two seconds. The screen will become backlit (release the button at this point). Press the set button four times, and you’ll see a number 5 in the bottom left corner. When the pedal assist limiter is set to “OFF,” you’ll have a reduced top speed through all pedal assist modes. Toggle between “OFF” and “ON” by pressing the plus [+] or minus [-] buttons. Hold “SET” again for two seconds to exit the setup interface.

To engage the throttle limiter, or to turn it off, power on the LCD screen and hold the “SET” button for two seconds. The screen will become backlit (release the button at this point). Press the set button five times, and you’ll see a number 6 in the bottom left corner. When the throttle limiter is set to “OFF,” you’ll have a regulated throttle output to about walking speed. Toggle between “OFF” and “ON” by pressing the plus [+] or minus [-] buttons. Hold “SET” again for two seconds to exit the setup interface.

The LCD console also has a USB port embedded in the underside of the LCD console that allows you to charge your mobile devices. To activate the USB charger, press the plus [+] button and the SET button at the same time for 2 seconds. This will turn on the USB charging capability. Hold the same buttons again for 2 seconds to turn this feature off.

My wife and I bought Pedego City Commuter Classic bikes in early 2014; they are 2013 models rated at 48V, 15AH. They have been fun to ride but we have had issues. I had to have my handlebars replaced within the first year because they wouldn"t stay firmly in place. This was done under warranty. We have found that the bikes sometimes derail when hitting potholes. One time my sensor got knocked out of position when I hit a pothole, disabling the pedal assist feature; it had to go to a dealer to be repaired, at my cost. My wife"s computer failed when the bike was about 2 and half years old and had to be changed out at her cost. My entire power system failed a few weeks ago and now it is in the shop being diagnosed. The batteries have lost some of their power. Pedego says on their website that the batteries are supposed to last 2-4 years. I got a quote from a Pedego dealer for a replacement battery at $1,095. I have been checking on battery replacement costs for other brands and after 4 quotes from other brands I saw a range of $499 (Emazing) to $780 (Kalkhoff). So $1,095 for a new battery is high. Also, an Electra rep stated to me in an e-mail that the Bosch battery their Townie Go! uses will work at optimum capacity for 5,000 charges, which Bosch states is typically 8-9 years. The Electra/Bosch replacement battery is $750. While Pedego offered a good bang for the buck in early 2014, they would not be my first choice for a new bike in 2017.

The most important part of any Pedego is the person riding it, and the City Commuter was created with your comfort in mind.Unique to the City Commuter is quick release handlebar stem that allows you to easily make adjustments for a perfect fit.

In summary, the Pedego City Commuter is quickly becoming the world’s best selling electric bike and it’s easy to see why. It’s widely considered to be the very best all around electric bike you can get -- for any price.

Today, I want to chat about the Pedego City Commuter electric bike. This is my favorite bicycle of Pedego’s line. The frame and handlebars pay tribute to the traditional biking style and with the 48-volt battery, the Pedego City Commuter is a fun, powerful ebike.

The tires on the City Commuter are more narrow than on other Pedego ebikes, at 2-inches. Since the City Commuter can be ridden more vigorously than other models, the narrower tires make it a little easier to accelerate and create a more lively bicycle.

As mentioned earlier, the Pedego City Commuter is probably my favorite ebike in Pedego"s line up. When we first received our store models last March, we received two City Commuters - a classic, 28" frame with the taupe color, and one 26" step-thru frame in Merlot. When I rode the step-thru, I knew it was the perfect bicycle for me.

When I tried out the City Commuter, I was skeptical at first. Did I really want to try biking again? Well, of course I did. And, of course, I tried the ebike. When I was first trying out the pedal assist, there was a bit of a learning curve, but the LCD monitor was helpful in showing me my assistance level and speed. I found myself to bounce back and forth between Level 1 and 2. Once I had my rhythm, I was consistently at Level 1, only needing moderate assistance. After about a week of trying various levels while commuting to work, I decided to only use the pedal assist when I absolutely needed it for my ankle.

Well, there you have it, the specifications and technology behind the Pedego City Commuter electric bicycle. If you’re looking for a zippy, fun bicycle to get you to work or around town without feeling winded, then you may benefit from the City Commuter.

Pedego Interceptor is the electric bike that has it all -- combining beach cruiser comfort and style with breathtaking performance and user friendly features.

The most important part of any Pedego is the person riding it, and the Interceptor is made to be the most comfortable electric bike on earth.Cruiser-style frame geometry helps you enjoy a natural, upright riding position

In summary, the Pedego Interceptor is my personal favorite electric bike. It’s what I like to ride. I believe it’s hands down the greatest electric bike ever made. It just doesn’t get any better than this.

The Pedego Interceptor is a classic beach cruiser design that focuses on comfort. This Pedego electric bicycle will intercept all previous thoughts on ebikes. (Get it?)

I consider the Interceptor the Batmobile of the Pedego line. This electric bike is packed with technical features, including a nive 48-volt battery and MAG wheels. Coming in five different frame colors, four tire options, three frame sizes, and two battery types, the Interceptor is just short of a full Christmas tune.

the Pedego line just released the Astin Martin of their line, the Platinum Interceptor. The Platinum Interceptor offers a 10-speed shifter, which will make riding easier at higher speeds.

As with all Pedego bicycles, they are equipped with SRAM brakes for powerful, consistent braking and Shimano gears to allow for seamless shifting without having to overthink.

new Pedego Electric Bikes, I feel as if I"m able to provide a thorough review of the Interceptor - the super-charged beach cruiser. Comfort and performance rarely go hand-in-hand, but in the Interceptor"s case, you"ll find them nicely integrated.

The LCD features a USB charging port, which has come in quite handy when my phone battery is running low. When I ended up staying a bit too late at work one night, the lights came in quite handy on my commute home. They are plenty bright and added another level of comfort and safety.

Having used the Prodecotech models over the past few months, I was quite curious how an e-bike with pedal assist would differ from those models with throttle. The first Pedego bike to enter our demo fleet was the Classic Interceptor. A Michigan State Police blue with big, bowed out handlebars, the Interceptor feels imposing - like you"re riding the king of beach cruisers. Read more here...

The stylish Trend is one of the top commuter E-bikes on the market. This electric bike comes with many standard features, such as a 12.5AH lithium ion battery, an LCD display, and a powerful 500 watt motor that is capable of reaching speeds up to 20mph. For your commuter needs we’ve added in a rear rack and front suspension. Every Bintelli E-bike comes equipped with a headlight, taillight, seat post suspension, rim reflectors, a water bottle, and a UL approved charger. This model is available in many colors.

The Pedego Interceptor: Platinum Edition is for those who refuse to settle for less. It makes America’s favorite electric bike even more lovable with premium upgrades.

The Pedego Interceptor is America’s best selling electric bike. It combines beach cruiser comfort and style with breathtaking performance and user-friendly features.

The new Pedego Element gives you the biggest bang for your buck. For only $1,695, you can enjoy the premium quality and local service that Pedego is famous for.

The Pedego City Commuter: Platinum Edition is where well-appointed luxury meets everyday utility. It’s fully loaded with practical features and all the premium upgrades you could ever wish for.

The Pedego City Commuter is a complete package. It includes everything you could possibly want in an electric bike, all in one place for a reasonable price.

An electric bike conversion kit will include the motor to drive you along and the battery to power it, obviously. But it also needs to include the apparatus to control power output level. This usually takes the form of a bar-mounted display.

The kit includes a 40Nm brushless hub-based motor and replacement front wheel. The lithium ion battery pack connects to your handlebars, and also acts as the system controller and LCD display. There’s a crank-mounted cadence sensor, and that’s all there is to fit to your bike.

We tested the kit on a Cannondale Quick hybrid and reckon that conversion takes around 30 minutes. Charge level is displayed via LEDs on the battery, which also houses the system controller. We got up to an impressive 48 miles on a charge.

It uses Aventon’s new(ish) full-color LCD display, which is one of the most functional and aesthetically pleasing displays in the affordable e-bike category.