dynojet lcd display manufacturer

Featuring a robust array of options, you can toggle the display, so the data most important to you is front-and-center. The POD-300 can log channels to internal memory, then access them when you’re done riding through our Power Core software (only available for Windows computers). This display module connects to your Power Commander V/6 or Wideband 2 device network through a CAN cable (included).

The POD-300 is weather-resistant, so it can be used in any environment. The high-contrast display is easily viewable in direct sunlight. It includes a velcro backing for easy installation and removal, or you can purchase a handlebar mount separately (SKU #61300062).

Please note that the POD-300 is a display module only, which is used in conjunction with Power Commander V, Power Commander 6, AutoTune or Wideband 2.

The LCD Display connects to any Power Commander PCV (some BMW models excluded) via a "quick disconnect" cable. It is designed to remain on the bike and is weather resistant. While connected, the unit will display all available data from the Power Commander. When the optional Multi-Function Hub is also installed all of its data is available for viewing as well.

The unit can be removed easily from the bike and programmed with a desktop computer. Maps can be downloaded, stored and the data viewed with the supplied software. As new functions, screen and features become available the unit is �user upgradeable� using the supplied USB cable and free downloads available on Dynojet"s website under downloads and map downloads.

DescriptionThis LCD Display connects to the Power Commander V (PCV) via a quick disconnect cable. While connected, the unit will display all the available data from the PCV such as throttle position, RPM, percent of fuel change and injector duty cycle. The LCD Display utilizes a touch screen, making setup and navigation easy. It accepts a 1 GB SD memory card (1GB is the maximum useable size) to allow logging of data being displayedfor later analysis.

The new Power Commander V is the latest in engine control technology from Dynojet. The PCV is very compact, yet offers expanded features and options, with tremendous control over your engine management system.Smaller unit - less than ½ the size of PCIIIusb

Dynojet have taken virtually the same technology that our patented Tuning Link Dynamometer Software (designed for automated Dyno tuning) uses, along with Bosch Wide Band O2 sensor(s) and miniaturized it to be used on your bike, while you ride.

The Power Vision incorporates a very sophisticated, yet simple touch screen display that DOES NOT require the use of a computer to flash your bike Simply select the tune and follow the on-screen prompts to download the tune, and if you’d like, edit your tune without ever touching a computer! That’s right, you can flash and make changes to your tune without ever getting off your bike. Anyone of the 3 types of tunes outlined below are able to be edited on the device, or in the WinPV Tuning Application!

AutoTune Basic and Pro – calculates and stores fuel trims to help you optimize fuel curve utilizing the factory o2 sensors (Basic), or Dynojet’s Wide Band 2 System (Pro)!

Established in 2007, Raystar has built its reputation by offering advanced products in PMOLED display and modules as well as in FSTN / STN LCD Display Module, COG LCD, TFT LCD Display.

Every valued customer of Raystar plays a key role in our current success. We promise to keep growing as your most trustworthy partner for display solutions in the decades ahead.

Power Commander V PCV is the state of the art fuel injection management system for late model fuel injected machines. PCV installs easily to factory wiring harness"s using OEM style connectors - no splicing or soldering is required. PCV uses the latest CAN-BUS technology for lightening quick communications and ultra-precision control, and is less than half the size of the PCIII USB. Once installed, you provide your machine with a map to reconfigure your fuel injection operation. PCV can create a separate map for each cylinder for each gear, and for each injector. You can visit a local Authorized Power Commander Tuning Center and have a custom map built for your specific machine on the dyno. PCV allows you to store 2 maps on the unit (accessible with optional map switch). The maps smooth your air/fuel ratio to improve throttle response, drive-ability, and power. The PCV cleans up the majority of your fuel injection issues at a very affordable price. The PCV also provides easy expandability with the optional extras like: Quick Shifter (allows full throttle clutch-less upshifts), Auto Tune (build or modify an existing map as you ride), LCD Display (view and control live data and maps) and 2 Position Map Switch.

825 Speedo Seats & Luggage- racks Frame Chassis Suspension Forktubes Wheels Brake Fenders Gastanks Motorparts Gaskets Intake Transmission & Driveline Exhaust Electrical & Lights Handlebars, Cables & Mirrors Oil tanks Oil & Chemicals Fasteners Wind- shields Forward controls, Footpegs Miscellaneous INTAKE 12 NEW PRODUCTS ADDED WEEKLY AT MOTORCYCLESTOREHOUSE.COM POWER COMMANDER 5 - PTI KITS FOR POWER COMMANDER 3 KITS DYNOJET POWER COMMANDER V - PTI The PTi version of the Power Commander 5 is developed for turbo or supercharged bikes with fuel injection. The Power Commander PTi comes with a Bosch 3 bar map/ temp sensor as part of the harness for extended capabilities built in to the control center software. You will be able to modify the fuel curve based off a pressure (boost) table and/or temperature table. The pressure table gives 3Dmapping capability based on boost vs RPM, while the temperature table gives 2D mapping capability with up to 50 points of adjustment. Precision, control and reliability in one. 960680 09-11 Softail 960682 10-11 Dyna 960681 10-13 XL1200 981548 08-11 V-Rod For Turbo & Supercharged Fuel Injected bikes 960680 POWER COMMANDER III KITS DYNOJET POWER COMMANDER III Getting more power from your stock bike, changing to a high flow air cleaner, other exhausts or building high-output engines, all require adjustments to the stock injection system. Installing a Power Commander is straight forward, comes with stock style connectors and fits between the stock ECM unit and the bike"s wiring harness. Most installations take less than 15 minutes. You will have full control of the fuel curve, without making permanent changes to the bike"s injection system. The Power Commander is supplied with fuel maps for most popular combinations but maps can always be swapped or altered by using a PC. All Power Commanders are supplied with a comprehensive installation guide and a CD which includes the software, fuel maps, videos and a detailed user manual. Dynojet"s latest designed maps can be downloaded from the web at powercommander.com . Alternatively adjustments can be made with the three faceplate buttons allowing full control, without using a computer. Power Commander III 981524 07-08 all XL 883 981525 07-08 all XL 1200 981568 2008 Touring Extract all Power Commander functions!! DYNOJET MULTI-FUNCTION-HUB UNIT Is connected to the Dynojet Power Commander USB III series for even more op- tions. For the specific options you choose to use, extra connector cables must be purchased accordingly. Note: For the Multi-Function-Hub to operate properly with your Power Comman- der III USB series module, your will need to update the PC III USB to the correct firmware and software version as instructed in the instruction manual on www. powercommander.com. Multi-Function-Hub units 981558 Unit only 981559 Unit with map switch cable 981560 Unit with all cables Accessory cables Handlebar mount bracket assembly Allows installation of the Multi-Function-Hub unit to the handlebar, if required. 981561 H/B bracket Speed input or gear position Allows map to be adjusted based on gear position and/or displayed speed. 981562 Speed/Gear input Relay Trigger output Allows two relays to be activated based upon RPM and throttle position, like used with Nitrous Oxide injection systems. 981563 Relay trigger Pressure/Boost Input Allows map to be trimmed based upon pressure / boost input. 981564 Pressure/Boost Map Switch Allows the user to switch between two different maps, like cruise & race, instantly. 981565 Map switch Pressure sensor cable Cable to be used with a pressure sensor. 981566 Pressure sensor 981558 DYNOJET POWER COMMANDER III LCD DISPLAY UNIT Will connect to any USB series Power Commander III via a "quick disconnect" cable. The LCD Display Unit is designed to remain on the bike, if desired, and is water resi- stant. It can real time display all Power Commander functions in multiple interactive display screens. Multiple maps can be stored in the unit when a SD memory card (not supplied) is installed. These maps can be sent to the Power Commander while riding, additionally maps can be adjusted using the controls on the LCD display. The display unit can log the data being displayed for later analysis, again only when a SD card (up to 1Gb) is used. USB programmable and upgradable. Active TFT LCD 240 x 320 16 bit color screen. Note: Power Commander firmware may need to be updated to use the LCD display unit. This can be done online at www.powercommander.com . 981541 09-13 Softail, Dyna, Touring, XL, V-Rod On-Bike fuel map adjustments! 981541 Multiple interactive screens for On-Bike map adjustments USB memory card slot FOR POWER COMMANDER 3 KITS ADJUSTABLE FUEL INJECTION