lcd screen white lines factory

Watching your mobile screen with those white or black vertical/horizontal lines is annoying. In short, it’s tough to use a phone with these lines appearing on the screen. Typically, this issue is associated with the LCD, caused by a faulty hardware component in your device due to some accidental fall or water damage. Phones with such damages can only be fixed at a phone repair center.

Before you head on to the fixes, let’s make your phone data safe. Sometimes, these lines are irreversible, and even the solutions you’re up to try may be followed by some sort of data loss. Therefore, the first thing you should do is make a backup of important files and apps on your device. Some popular ways for data back in Android devices are via:

If there’re white lines on the screen, this solution may prove effective. A battery cycle is when you charge a mobile to 100% and let it drain to 0% again. Usually, the lines will disappear soon as you charge the battery fully.

If the above methods don’t work, it’s time to try this masterstroke. Using your phone in a safe mode will confirm if the lines are because of some faulty app or software.

Check if the lines are gone! If yes (hopefully), then a third-party app is the culprit. Now uninstall the latest downloaded applications until the issue is gone. OR you should try the Solution:4

Suppose the lines are still visible. Then the issue is most likely due to some hardware failure- and the best option for you is to take your device to a reliable repair center.

If the horizontal or vertical lines still appear on your phone screen after trying all the above methods, you better take your device to a reliable mobile repair store near you. Most likely, it’s a faulty hardware component that needs to be repaired or replaced. Here, we would suggest you opt for only an authorized service center, as this will ensure flawless repair at a reasonable cost. Besides, if any of the components have to be replaced, they will be genuine and as per your specific requirements.

We know it is quite worrying that you spent several dollars to purchase a new iPhone and after a few months of use, it develops the dreaded "white line on iPhone screen" problem. If that is your case, you do not have to worry or spend sleepless nights. You should veritably be heartened by the fact that there are millions of iPhone users facing the same problem.

And while we are at that, if you have been hunting for a solution to fix the white lines on your iPhone screen, it is time that you call off the hunt, as this post will equip you with a complete guide on how to fix white lines on iPhone screen problem and also feature some underlying cause to the problem. Let"s do it!

Many iPhone users have flocked to Apple forums asking, "why does my iPhone have white lines on the screen". Well, for your info, there is no one particular cause for the white lines problem; instead, the issue is fueled by a variety of causes, and here is a highlight of some common causes often linked to the white lines problem.

In most cases, the "white lines on iPhone screen" problem results from software bugs/glitches. Unfortunately, the only way to fix an iOS-related problem is by restoring your iPhone, resulting in data loss. Therefore, to avoid such an instance, we would like to introduce you to a more ideal solution to resolve iOS-related problems - the TunesKit iOS System Recovery Software.

It is a top professional software with immense abilities to resolve over 150 iOS/tvOS related problems, including boot loop screen, iOS update failure, headphone mode, white lines on iPhone screen, and blue screen, to mention a few. Moreover, TunesKit iOS System Recovery is compatible with all iOS and works perfectly to resolve all iTunes errors, put iPhone into DFU or downgrade the iOS version if necessary.

The program is 100% secure, ad-free, and easy to use, and here is a quick illustration of how to use the app to fix white lines on the iPhone screen without data loss.

Finally, click the "Repair" button to start the iOS recovery process. Make sure your iPhone is connected during the entire process. This should quickly resolve your white line problem on your iPhone.

It is possibly the easiest way to fix your iPhone screen white lines problem. Basically, a simple force restart gifts your iPhone a fresh software run and helps eliminate app bugs and conflicts that may be causing the display problem. Here is a simple guide on how you can do it.

Another top alternative solution to force reboot is restarting your iPhone in safe mode. This solution informs you whether the white lines display problem emanates from third-party apps installed on your iPhone. Below is a quick guide to restarting your iPhone in safe mode.

If the white lines disappear after the restart, you should embark on a mission to uninstall the third-party apps. Keep uninstalling the apps until you find the one causing the display issue.

Resetting your iPhone is another proven fix "iPhone screen is white with lines" problem. It is possible that a glitch in your custom display settings could be causing the problem. It is, therefore, necessary that your factory reset your setting and grant your iPhone fresh settings line up.

Besides launching new iOS versions, Apple provides regular update batches to help fix occurring bugs and improve performance. Older iOS versions are vulnerable to developing software glitches, which may cause display issues such as the "iPhone screen white lines" problem. Therefore, you should consider updating your iPhone to the latest version, and here is how you do it.

According to many tech gurus and iPhone X users, resetting the iPhone to factory settings has proven to be an excellent fix for the white line on screen iPhone issue. Usually, performing a factory reset returns your iPhone to its original state, and therefore all your installed apps, data, and setting will be lost. So, kindly consider backing up your data before proceeding with the instructions below.

If your iPhone display problem is not yet solved, it is now time we explore more advanced software fixes to get rid of the white lines on your iPhone. Among the most effective advanced software solution is putting your iPhone into Device Firmware Update (DFU) mode.

Step 4: Perform a force restart on your iPhone (refer to Fix 2) for a few seconds, and keep holding the Home/Volume Down button until "iTunes has detected an iPhone in recovery mode" iTunes notification shows on your computer screen.

If none of the software solutions above work to fix the "white lines on iPhone screen" issue, it is now almost certain that it is a hardware problem. In that case, we suggest that you start by firmly putting your iPhone screen properly.

If possible that your LCD/OLED screen may have disconnected from the logic board. In such an instance, firmly push your screen to re-establish the connection. Use your thumb finger to gently press the screen against the logic board, as illustrated below.

Here is another underrated hardware fix for the annoying white lines display problem. Although it may seem relatively simple, it works wonders! Now, charge your iPhone to 100% and allow it to drain to 0% before recharging again. This helps to neutralize the excessive Electro Static Discharge (ESD).

If none of the above-mentioned solutions work, then the only explanation for your display problem is that your screen is faulty. Hence, you need to replace it with a new one.

If your warranty is still valid, we highly recommend that you find the nearest Apple store for screen replacement service. Equally, if your warranty does not stand, you can always purchase a genuine Apple screen from the Amazon store and find a professional iPhone repairer to replace it for you.

Could the white lines be fixed? If you are running short of time, or if you do not have access to the service center, you can resolve the issue on your own.

Content is displayed on your iPhone"s LCD screen. A logic board is located behind this LCD screen. When your iPhone is dropped and the connection is damaged, it will show white lines across the display. Plus, if the iPhone system is damaged, it can be fixed by a professional tool. It is possible to fix this and remove the white lines.

It is first necessary to ensure that the lines are permanent. There may be some issues with the display because of some recent app changes. You should check if the lines are appearing across apps, as well as on the lock screen and the home screen. Make sure you have the latest iOS updates installed and see if that fixes the issue. The iPhone screen will need to be repaired by some simple DIY tasks once these white lines are established as permanent.

Just a reminder, we have lined up some bonus tips to help you prevent your iPhone from developing white lines on the screen in the future. Of course, you can always share these tips with your friends and family and save them from dealing with this annoying problem.

Now, you have 10 workable tips to fix the "white lines on iPhone screen" problem. The list consists of both software and hardware fixes. Your job is to try each fix and find out which one works to resolve your problem.

When you see white lines on iPhone screen, you"ll have questions about a lot of things. Instead of getting panicked, it is suggested to find the right workaround before it gets worst. Don"t worry. There are many solutions available in the market proposed by the techniciansand you can solve white lines issue with your smart device quickly at home. These methods are easy and can be followed without needing to consult a professional every time. Now just test them one by one.

There are several reasons that can cause white lines on your iPhone screen. Some of them are very easy to detect, but some are difficult. Here are some of the reasons behind the white lines appearing on your screen:

Issue of Flex Cables: When the flex cables of your iPhone are not connected correctly, they result in causing white lines on your screen. In other words, the bad connection is the reason behind this issue.

Electro Static Discharge: The electro-static discharge can also result in causing white lines on your iPhone screen as it results in damaging the internal functions of the phone.

Broken Screen: A broken screen is a significant cause behind the white lines appearing on your iPhone screen. The screen can be broken when it falls on the ground or any other hard surface, which damages the screen, and as a result, a white line appears.

iPhone Dropped In Water: The white lines on the iPhone screen can also be caused when you drop your phone in the water. No doubt, the water damages the internal functions of the phone, especially its screen, which is one of the sensitive parts of the iPhone.

Loose LCD Cable Connection: You may notice iPhone screen white lines when the LCD cable connection is loose. The reason behind this happening is that you may have replaced your iPhone"s front, but the new screen does not have the Apple cushion pads installed in it. As a result, the cable connection does not remain like the original one.

Which solution you can use to fix iPhone screen turning white with lines? If it"s an emergency, you probably don"t want to consume some time to look through all methods. To have a quick look, here is a vivid video tutorial from YouTube to intuitively show you how to fix white lines on your iPhone screen.

There are different methods proposed by the experts to solve the issue of white lines appearing on the screen, but the best way to fix this issue is using Joyoshare UltFix. Below is the detail of this tool.

Click on "Standard Repair" section for mode selection. If your device is not recognized, you will be asked to put it in DFU or Recovery mode, simply following the on-screen instructions to do it.

Click on the Repair button and the program will start fixing the white lines that appeared on your iPhone screen. Wait until it completely finished. Your device will restart and you can see whether the issue is solved.

When you see white lines on your iPhone"s screen, the first question that comes to your mind is how to fix white lines on the iPhone screen. Some of the standard methods have been mentioned below that can be used for fixing this common iPhone issue.

The most common solution to the issue of white lines on the iPhone screen is to restart your iPhone immediately. It is because there might be a technical issue that can be solved by restarting your device. Follow these steps to undergo this process if there are white lines on iPhone screen:

Note: When the Apple logo appears, it means you have restarted the device successfully. Plus, you will also see there are no white lines on the screen.

Putting the iPhone in DFU Mode is considered the most common method to resolve any iPhone-related issue, such as white vertical lines appearing on the screen. It is recommended to save the backup of your data before performing this method. Follow these steps to put the iPhone in DFU mode:

Note: If your iPhone"s screen turns black after releasing the Volume Down button, it means you have put your iPhone into DFU mode. After exiting the DFU mode, you will see there are no white lines on your iPhone screen.

Note: A dialog box will appear that will ask you to enter the Apple ID of your device for using the credentials. You need to confirm resetting your device. Wait for a while and let the data get erased from your iPhone. After resetting, you will notice there are no white lines on your screen.

Restoring your iPhone via iTunes is a suitable method for fixing the issue of white lines appearing on your iPhone screen. You can follow these steps to restore your iPhone:

Note: You will see your iPhone saying Restore in Progress, and the progress bar will be shown by iTunes. Your iOS will start restarting and when the process is completed, disconnect your iPhone from the computer. You will see there are no more white lines on the screen.

You need to check the cycle count of the battery of your iPhone when there are white lines on your screen. It is because there may be an issue with the battery of the iPhone that is causing vertical white lines.

You may notice iPhone lines on the screen, i.e., vertical white lines on the screen because your screen has been damaged from inside. For this purpose, you may need to replace your iPhone screen with a new one or fix the existing one. Make sure you put the iPhone screen firmly. Follow these steps to fix your iPhone screen:

Note: Do not forget to save the backup of your data present in your iPhone before replacing the damaged screen. If your iPhone is still under warranty, you can ask the manufacturer to fix your iPhone screen to get rid of white lines.

When a white line appears on your screen suddenly, you undoubtedly think why there are white lines on my iPhone screen and how can I get rid of them? All you need to do is factory reset your iPhone.

When you see white lines on iPhone screen, do not get panicked or worried. It is because it is a common issue that is faced by iPhone users. There are many reasons behind this happening, and similarly, there are many solutions to get rid of these lines in no time. For your ease, we have listed simple methods to help you resolve this issue yourself instead of visiting a technician to fix it. Make sure you follow all the steps correctly to undergo the process efficiently to achieve desired outcomes.

The vertical lines on phone screen Android problem mostly occur when your device becomes too old or if there is any hardware damage. Well, the problem seems quite serious. However, you can fix the issue by restarting, power cycling, or factory resetting your Android phone. Also, go through this article completely to know more fixes to resolve this problem and use your phone without any further problems.

The problem won’t let the users access their phone as the app icons or screen seems blurry or unclear almost making the device difficult to use. So, here, in this article, we have covered all the workable fixes that will help you get out of this situation and let you access your phone once again. So, without any worries, follow the mentioned troubleshooting methods step-by-step to fix vertical lines on Android phones.

Now it’s time to check out how to fix vertical lines on Android phone. Go through them and check out which one works for you to fix the issue that was due to a software glitch.

Whenever you come across vertical lines on mobile screen the first thing you should do is simply restart your phone once. Restarting has the power to fix small glitches that occurs on Android phone.

You should ensure your phone is fully charged. If not then charge your device to full. This is instructed because some Android phone users have tried this and it helped them to get rid of the vertical lines issue.

Another solution that you can try to troubleshoot vertical green line on phone screen is to remove your device’s battery, case & SIM card. Many users have found this way helpful in their case, that’s why it is suggested to you.

Even restarting your phone in safe mode also has the chance to find out the culprit and can solve vertical lines on mobile screeneasily. Doing this will check if any third-party app is the culprit for the problem.

In this mode, if the vertical lines are removed then ensure that the third-party app is the culprit for it. So just find out the latest app installed on your phone and immediately uninstall it.

Generally when your phone drops from a height then there is a possibility that LCD might have disconnected from the logic board. If this happens then try to push the screen gently just to re-establish the connection.

You can do it by yourself by simply placing one finger on the screen and another one on the device and then pressing the screen gently. You should be careful not to press hard as it can break the device.

Due to the outdated version of the OS, users are facing numerous errors and bugs on their smartphones. Maybe vertical lines on Android phone screen issues have occurred because of the outdated phone. So simply check for the latest update of your device OS by following the below steps:

You should also try to factory reset your Android phonein recovery mode. Though this method has a chance to erase all your data from your phone but it can fix white lines on the Android phone screen you are coming across.

It has worked effectively to repair several issues like Android black/blue screen of death, apps keep crashing, settings has stopped, and others. So this can be useful to fix vertical lines on Android phones.

Well, mostly the phone display when not works or shows you vertical lines then somewhere the causes is due to a fault in a hardware component. This issue can only be fixed at a service center. But before going there, you can try several manual options to fix vertical lines on Android that are caused by a software glitch.

Yes, the vertical lines on Android phone screen are generally caused by faulty hardware or software component. But the issue can be fixed by following manual options or at a service center. But the vertical line on Android is fixed without any further problem.

Several times, your Android phone screen starts flickering or flashing. In such a situation, the best way to fix the issue is by putting the device into safe mode. This will give you an idea of whether the issue is related to apps or others. And then delete the apps causing problem.

So, above are the methods that will help you resolve vertical lines on phone screen Android.However, in case you lost any of your Android device’s data, use the

Struggling with the white lines on iPhone screen issue must be frustrating as you"d have spent a lot of money to purchase an expensive iPhone. You"re not alone in facing this issue, as most iPhone users have complained about this particular issue.

So, it would help if you didn"t spend your night sleepless as there is a way out of getting rid of the lines on iphone screen. Luckily, this post will introduce how to fix these issues. Tune into this post wherever you"re now

The simplest way to eliminate the ""lines on iPhone screen"" issue is to force restart your iOS device. Doing so might refresh your iPhone and eliminate the software bugs causing the issue.

Since an old iOS version makes your iPhone vulnerable to developing software bugs that might create issues like the ""iPhone screen white lines"" problem, updating the new iOS version is necessary.

So, you might decide to replace the iPhone screen with one. If your iPhone screen"s warranty is still valid, you can visit the nearby Apple Store and ask them to replace a new iPhone screen with the older one.

If you haven"t found the appropriate way to fix the ""white lines on the iPhone screen"", it may be time to opt for UnicTool Umendit. It is unbelievable that it can fix 150+ iOS issues, and the surprising thing is that it doesn"t cause data loss.

Instead of struggling with the ""lines on iPhone screen"" issue, please prevent your iPhone from being affected by this mess. Here"s how to prevent it.

That"s all we"ve had from this discussion where you can find the most efficient ways to fix the"" lines on iPhone"" issue. All the ways we"ve introduced in this guide are worth a try, and you should try every method.

Cause: There are several possibilities that can cause white lines on an LCD screen. One would be high temperature on the logic board. Logic board drives the LCD panel and when it overheats can cause this display problem.

Solution: One solution would be to clean the vent holes around the TV. One possibility that I have experienced myself servicing is a bloated capacitor on the power supply board. The worst possibility is a defective LCD panel, which is costly to repair, and sometimes it’s more practical to buy a new TV set.

Cause: There are two IC’s on the mainboard and that probably caused the IC to overheat, which in turn caused the main controller board to malfunction. They may be possible panel failure. No signal from the mainboard to the LCD panel is the usual cause of solid white screen or flickering white screen.

If you have a white screen with error V3.41.0 flashing along the top, try this first– I pressed Exit and OK buttons together and was able to then click on input/source and bring up the HDMI input and, Hey, Presto! all working again.

The most common cause for the white screen is missing 12V supply for the panel. Sometimes though, it can be something very simple like a loose LVDS cable on the panel side. If this is not the case, then you will need to check the 12 V supply on the LVDS cable on the main board side (usually 2-4 pins on the end/beginning of the connector). If the 12 V is there, you should check it is secured onto the panel, where the LDVS connects to.

Are you seeing white lines on your iPhone? Well, you are not alone. This is the problem most iPhone users face and results commonly due to the disconnectivity of LCD cable with the logic board or may be due to an error in the software.

iPhone is the bestseller Worldwide, but like any other device, it can end up having software or hardware troubles that are required to be entertained and solved in time. Getting white lines on your iPhone screen out of nowhere can be heart-dropping. Here in this article, you will get a grip on all the possible reasons behind the trouble and solutions to get rid of the problem.

iPhone screen with vertical white lines can exist because of Electro Static Discharge (ESD). ESD can cause damage to solid-state devices because of the release of static charge.

No matter how the problem begins, the ultimate focus is to find cues to solve the trouble. How to fix white lines on an iPhone screen? Here is one preeminent solution for this problem.

Seeing something unusual on your precious device can be traumatic, but no need to worry. iMyFone Fixppo is the software to rescue! It can handle multiple iOS system issues, including white lines on the screen, and can make your iPhone as good as new without any data loss. You can reset your iPhone with just one click without any password. It is power-packed with many befitting features, which include:

You can restart your iPhone device to rule out any software glitch. Restarting your device ceases all the programs and could solve the problem that is messing up with the display. For iPhone 8 or older, press and hold the power button until the slide to power off bar appears on the screen. For the iPhone X and upgraded models, hold the volume button and side button simultaneously until the slide to power off bar appears on the screen.

The white glitches might appear because the iOS version is too old to handle the processing. Updating the current version and hopping onto the latest version of iOS can fix the problem:

iPhone safe mode eliminates and uninstalls all the faulty extensions that can result in malfunctioning. It helps iOS to run on a jailbroken iPhone. Rebooting to the safe mode can solve the problem of white lines by following three simple steps.

If white lines still cannot be removed after trying the above methods, you can carefully try to factory reset your iPhone. However, please kindly note that all your installed apps, data and settings will be lost during the process, since this operation will put your iPhone into its original state. Thus you may backup your iPhone first to avoid data loss. To reset your device:

Device Firmware Update(DFU) mode can remove any software error, including the vertical white lines that appear on display. It erases and restores all the codes on your iPhone. You can take use of Fixppo to enter Recovery mode with one click, or you can put your phone into DFU mode by the steps below:

If any of the available options fail to recover the display, then the last hope is to repair the screen because there may be a hardware issue. You have accidentally dropped your device or handled it roughly, which can result in the blip of white lines on the display. Get an appointment at the Apple store for screen repair.

iPhone LCD Screen is the most sensitive and delicate part of the device. The LCD screen damage usually occurs because of the immense application of pressure on the screen or when the display gets distorted by hitting a rough or hard surface.

If you have an iPhone, then probably you’ve come to appreciate the dependability that these devices afford for the consumer. User feedback is generally positive, which is why they consistently remain worldwide bestsellers. However, as with any electronic devices, software and hardware issues sometimes come up, and when they do, you must deal with them. An example of that would be if your iPhone’s screen is showing white lines on it. In this article, we’ll go over what this problem most likely signifies, as well as what you can do to solve it.

With some cases of a problem with your iPhone, it’s exclusively an issue with either hardware or software. White lines appearing on your screen does not fall into that category, as it could be either one of those things that’s the culprit.

There are a few different potential software problems that might cause white lines. In the case of hardware, the most likely scenario is that the phone’s LCD cable has gotten detached from the logic board.

A minor software glitch that’s causing the appearance of white lines on your screen might be counteracted by restarting the phone. It’s easy to do and not at all time-consuming.

If you own an iPhone 8 or an earlier model than that, you’ll need to press and hold the Power button. After a few seconds, a Slide to Power Off slider will appear on the screen. Slide it to the right, turning off the phone. After a couple of seconds have elapsed, press thePower button again until you see the Apple logo. This indicates that the device is restarting.

If the white lines obstruct the screen so severely that you can’t see anything, then you might want to try a hard restart instead. This is a maneuver that abruptly turns the iPhone off and on again. The way that you do this varies depending on which generation of the device you have.

If you have an iPhone 6 or an earlier model than that, you’ll need to press and hold your Power button at the same time as the Home button. The Apple logo will flash on the screen if you have done it correctly.

It can take a couple of tries for you to get this right, but be patient and don’t give up. Once the hard reset is complete, it’s highly likely that the white lines will be gone if they were there because of a software issue.

You can do a backup with iTunes if you like. Connect the iPhone to your laptop or PC by using an Apple-approved USB cable. Next, pull up iTunes and make sure that it is the most recent version. Under Devices on the upper left-hand side of the screen, you should see your iPhone. Where you see the option to back it up, do so. It might take a few minutes, but now you should be good to go.

If you want to back up the iPhone using iCloud, then you must open Settingson your device. Hit your name at the top of the screen, and theniCloud. Scroll down and hit iCloud Backup. Be sure that the switch is toggled to the green “On” position. Tap Back Up Now.

Plug your phone into your laptop or PC with a USB cable. If you have an iPhone 6 or below, then you can press and hold your Sleep/Wake button and theHome button for 8 seconds. Then, release your Sleep/Wake button but continue to hold the Home button. iTunes should say that it has detected an iPhone in recovery mode. At that point, you can let go of the Home button. Your screen should be completely black. Your phone is now in DFU mode, and you can restore the backup version that you made.

This last version is how you can put the phone in DFU mode if you have a generation 8 or later. First, quickly press and release your Volume Up button. Next, press and release your Volume Down button. Press and hold your Side button until the screen goes black. Once it does, press and hold the Volume Downbutton while still holding the Sidebutton. After 5 seconds, release the Side button, but keep holding the Volume Down button. You will get the message about the phone being in restore mode if you have done it correctly. At that point, release the Volume Down button.

If the DFU restore failed to get rid of the white lines on your device’s screen, then that’s a strong indication that the issue is happening because of a hardware malfunction. As we mentioned earlier, the most likely thing to have happened is that the LCD cable is no longer hooked up to the logic board.

Rough handling of the phone might cause this to happen. If you dropped it at some point and it was out of its case, that might have done it. Exposure to liquid can also sometimes cause those annoying white lines to appear.

If all that is happening with it is that the LCD cable needs to be connected again, that’s a quick and easy fix. There might be something more serious happening with the phone, in which case replacement parts might need to be installed. If the device is still under warranty, then that should cover it. If the warranty has expired, you’ll have to pay for the cost of the fix. It should be worth it, though, since those white lines can render your phone virtually useless until you figure out how to get rid of them.

The appearance of static or flickering horizontal lines on a computer screen can be frustrating and inconvenient, but there are many steps you can take to try to fix your problem. This guide will walk you through various checks and fixes you can perform on your computer and its monitor to find out why the lines are appearing and what to do to make them disappear.

Horizontal lines on a computer monitor can be caused by overheating or physical damage to the monitor and connecting cables. Conflicts between the screen and selected screen resolution and refresh rate settings can also cause line problems, as can out-of-date device drivers and operating systems.

Try a different monitor. If possible, try connecting to a different monitor or screen. It can help you determine if the lines are caused by your computer’s screen or the computer itself.

Check your monitor while it’s disconnected. Keep your monitor powered on, unplug it from your computer, and look for any flickering or lines on its screen while it’s disconnected. If you see any kind of distortion, this means that your monitor is damaged.

Close and reopen your laptop. Close your laptop’s screen, wait a few seconds, and reopen it again slowly. Look to see when the lines begin to appear on the screen as you open the laptop. If the lines only occur at a certain angle, the cause is likely damaged wiring.

Check the monitor connection. Ensure all of the cables are securely connected, and watch for any improvements in screen image quality while you’re inspecting the cables. If you notice the image improves or worsens while touching the connecting cable, it may need replacement.

Remove magnets and electronics. If you have other electronics or magnetic devices near your computer, screen, or the connecting cables, move them somewhere else as they may interfere with the connection and cause the lines.

Reset your monitor to its factory settings. If you’re using an external monitor or screen, use its built-in settings, not your computer’s settings, to reset it to its factory settings. You can usually access these settings via a physical Settings or Menu button on the computer monitor itself.

To fix coloration and distortion on a computer screen, power the monitor on and off, restart the computer, and make sure the cable between the monitor and computer is connected securely. If you"re using a CRT screen, try degaussing the monitor. You can also try adjusting your video card"s quality settings and experimenting with your monitor"s adjustment buttons.

To fix screen burn on a monitor, also called "ghosting," try turning off your display, ideally for at least 48 hours. Also, try setting your screensaver to an all-white image and letting it run for a few hours. You can also try using the JScreenFix tool, which fixes stuck pixels.

Vertical lines appearing on LCD screen is very common. Whether the screen belongs to a laptop computer or desktop PC, mobile phone, or even a television, the fault is usually due to the ribbon cable and its connections.

A faulty ribbon cable can cause all sorts of havoc manifesting in bright vertical lines. Sometimes they can be coloured lines such as blue, green, grey, black, and red. The lines can appear thick or thin and on just one-half of the screen. Sometimes the fault will manifest as two vertical white lines. You can even get horizontal lines as well.

If you have lines appearing on the LCD screen, then the first simple thing to check is the seating of the ribbon cable that connects the display panel to the motherboard. Most of the time, the fault is with the poor connection made by the ribbon cable.

One of the most common problems with ribbon cables is oxidation of the contacts. It can happen either on the ribbon cable contacts or on the socket contacts. Manufacturers often use a mix of gold and copper for the electrical contacts, however, if they have not used enough gold, then oxidation occurs over time. This results in a working television or laptop screen suddenly exhibiting lines.

One of the most common faults with laptops is that the ribbon cable connecting to the LCD panel cracks. It typically fails near the hinge area due to flexing in that region, and over time, some of the tracks on the plastic cable breaks. I have seen these types of faults on many laptops. It does not matter whether it is a Lenovo, IBM, Acer, Samsung, Toshiba, or even a MacBook Pro!

This type of fault can also occur on LCD televisions; however, it tends to be on new units, where the box has received an impact during transit from the factory.

I used this same method of troubleshooting to repair an LCD television recently. Modern televisions have a video out socket, and if you feed the signal from that to another monitor, you can check for the quality of the video display. If the external monitor does not show lines, then you know for sure that it is a connection issue. Hence, this method of troubleshooting works for some of the modern televisions as well.

When half of the vertical interlace is missing showing a picture that is broken up vertically, the display appears with vertical lines. This is usually due to a cracked ribbon cable.

Generally, for laptops a replacement cable is always required due to it breaking near the hinge. I had this Dell laptop and replacing the LCD ribbon cable solved the problem. I managed to buy a replacement from Dell for a modest price £6.00. The laptop was just outside the warranty period; however, they still shipped out the cable free of charge. This is the reason why people buy Dell. In my experience Dell tend to stand by their customers and products, and their prices for replacement parts are realistic and down to earth.

Is your Google Pixel showing vertical or horizontal lines? Have you recently repaired your phone? This problem page will help you solve your issue when it comes to your Google Phone"s screen showing lines of any kind. Whether you have thick or thin lines of green, white, black, or many colors, the problem can be due to either software or hardware causes, so read on to determine the right solution for you!

Try taking a screenshot and comparing that to what shows on your phone screen. If the lines appear on the screenshot as well, the problem is likely a software issue.To take a screenshot, press the power and volume down buttons at the same time. Then head to your photo gallery to inspect the image (you may need to view the image on another screen to tell if the image has lines).

Is the image free of lines? Have you recently replaced the screen on your phone? If yes, your phone’s physical display is likely the problem. Jump to the Physical Disconnect section and follow along from there.

To start in Safe Mode while your phone is powered on, press and hold your phone"s power button > tap and hold Power off. Hold the power button and after a few seconds, start holding the phone"s volume down button as well. Continue to hold both buttons down until you see Safe mode on the screen. Check if the lines still appear.

Has your phone been exposed to extreme heat or cold? These unideal conditions wear on your phone’s hardware rigidity, resulting in weird screen artifacts.

If you recently dropped your phone or replaced the screen a physical disconnect or bad connection of the screen from the rest of the phone is a possibility.

If that didn"t help, try opening the phone and making sure the cable connecting the screen to the motherboard is fully seated in the connector. You can use the Pixel Screen Replacement guide to see how to do this.

If you recently repaired your Google Phone’s screen, the replacement screen might be faulty or you were not grounded when repairing the device. View this iFixit Answers forum post for the detailed answer.

If you have recently completed a repair on your Google Pixel, the lines on your screen may be caused by rubbing alcohol used in during the repair. Check out this iFixit Answers thread about this.

If none of these fixes resolved the issue, be sure to view the iFixit Google Pixel Screen Replacement guides to get the full instructions on removing and reattaching the screen components.

Immediately upon initial installation, it had thin colored vertical lines, about 20-30 lines, in a vertical band about ten inches wide, right in the middle of the screen.

However, the solid black background remained and grew a little wider. The solid black background spans the width of the screen from top to bottom. It is about twenty-two inches wide.

It has a very interesting set of white nearly-horizontal lines which appear at its bottom-most part/border. These lines swirl into a vertex at the right one third of the bottom of the black area. These lines are thin and grayish-white.

Power down the computer and unplug all peripherals. If you are using a laptop, take its battery out by flipping it upside down and sliding the battery release latch. Press and hold the power button for 15 or 20 seconds to clear all residual power from the system. Some of the computer’s power might have been transmitting to the monitor, causing it to short out. Reconnect everything and turn the system back on to see if the lines are gone.

Unplug the monitor from the back of the computer and wait a few seconds until it displays a message “No signal.” If the no signal message also has vertical lines, you know the problem is in the monitor and not in your computer. Press the “Menu” button on the screen and then use the other buttons to browse for a “Factory Settings” mode. Select this mode to reset the monitor to its original settings. If the lines persist, the monitor may have been dropped or exposed to a magnet -- which can’t be fixed.

Reconnect and turn the computer back on. Look for the lines at boot up: if you see lines before Windows loads, the problem is either with the video card, the video connection cable -- whether HDMI or VGA -- or the monitor itself. If the lines only appear in Windows, the problem is a Windows setting -- most likely the refresh rate. Right-click on the Desktop once Windows loads and choose “Screen Resolution.” Click “Advanced Settings,” “Monitor,” and then lower the refresh rate to see if the lines disappear.