removable lcd touch screen for your gopro factory

The LCD Touch BacPac is a removable LCD touch screen for GoPro cameras*. As a removable accessory, the LCD BacPac keeps your camera as small and light as possible, yet provides the convenience of an LCD screen when attached.

I do like being able to view what you are shooting. I have not been much in favor of the touch screen just because of it"s small size. I guess one could use a rubber tip pen, but haven"t used or tried that. At least they made it, with forethought, to use with all 3"s and 4"s.

The LCD Touch BacPac™ is a removable touch display that seamlessly attaches to the back of your GoPro for added convenience and control. It’s perfect for playing back videos and photos directly from your camera, including audio and instant slow-motion playback. See what your camera sees to frame your shots with confidence. Adjusting camera settings is easier than ever—just tap and touch the screen. Plus, when used with HERO4 cameras, you can select modes and navigate menus with a simple swipe. Includes Standard, Skeleton and Touch BacPac™ Backdoors.

The GoPro LCD Touch BacPac is a removable LCD touch screen that is compatible with your GoPro camera. It attaches quickly and easily to the back of your camera, which allows you to preview and instantly playback photos and video. Plus, the touch screen allows you to visually control the camera functions and settings. For added convenience, there is also an integrated speaker with volume control, as well as a 3.5mm headphone jack.

This website is using a security service to protect itself from online attacks. The action you just performed triggered the security solution. There are several actions that could trigger this block including submitting a certain word or phrase, a SQL command or malformed data.

I"m having a major issue wtih my GoPro Hero 7 Black. I turned it on yeasterday and out of the blue the touch screen was not working, completly unresponsive to any tap. The power button and the capture button are working fine.

It may be either a loose connection to the LCD screen, that the LCD screen is faulty and needs to be replaced or worst case that there is a fault on the motherboard.

Try shining a torch at an angle close to the LCD screen to check if you can detect an image at all when using the camera. It will be very faint so try it in a darkened room if possible.

If you can detect an image it means that there is a backlight problem with the screen. Either there is no power being supplied from the motherboard to the backlight circuit in the LCD screen or the backlight circuit in the screen is faulty and the screen will have to be replaced as it cannot be repaired. Hopefully it is not a motherboard problem in supplying backlight power to the screen.

If you cannot detect an image (or even if you can) then unfortunately without a schematic, the only way to determine if it is a problem with the screen or the motherboard is to replace one or the other. Again hopefully it is not a motherboard problem.

Here’s a link to a video that shows how to replace the LCD screen + digitizer in the camera. This will also help you to check if the LCD video flex cable connection is OK.

Here’s a link to the GoPro Hero5 Black Repair guides which may also help if the video isn’t clear enough at some points. Unfortunately there is no ifixit guide showing the LCD screen removal.

The LCD Touch BacPac™ is a removable touch display that seamlessly attaches to the back of your GoPro for added convenience and control. It’s perfect for playing back videos and photos directly from your camera, including audio and instant slow-motion playback. See what your camera sees to frame your shots with confidence. Adjusting camera settings is easier than ever—just tap and touch the screen. Plus, when used with HERO4 cameras, you can select modes and navigate menus with a simple swipe. Includes Standard, Skeleton and Touch BacPac™ Backdoors.

For those wondering what gopro cameras THIS specific kit is for, it"s for the hero 3+/hero 4. It mounts to the back of the 3+/4 as pictured and comes with 3 back doors for the hero 3+/4 housing. 3 doors included; 1 skeleton(open to touch the screen directly), 1 waterproof touch case(has a thin plastic membrane in the back to touch the screen with but is only waterproof to 3m/10"), and the full waterproof back(functions as normal waterproof back. screen not touchable but is view-able). the extra side button is for turning the display on, playback mode, and off. overall it"s very easy to use and go through menus to change settings.I like that I can now frame my shots better and see what I"ve recorded. it adds some thickness to the camera but i"m not concerned about it. I"d only use to it line up shots and see how they came out. it doesn"t need to be on all the time... to conserve battery life. I don"t know how it effects battery life yet, but i"m not too worried about that. I use a telesin 1300mAh/4.81Wh aftermarket battery with the gopro hero 3+ factory(1180mAh/3.885Wh) battery as backup with my 3+ silver.The package also includes a plastic protective case for when the lcd display is not in use.The display does not look to be an HD resolution screen and does not zoom on playback.You can delete media selectively. Whole groups of burst shots/individual pictures from the burst, videos, etc. instead of last/all.Few notes about the touch bacpac door from the GoPro official site:"The LCD Touch BacPac backdoor has a thin plastic film across the back that lets you use the BacPac"s touch functionality even while in the housing. The backdoor"s thin plastic film can however be damaged if there is a big difference in air pressure between the inside and outside of the waterproof housing. It"s important that you are aware of the conditions that can cause this, so that you take the necessary precautions to prevent damage to the film.Here are some scenarios where the plastic film can become damaged:If you close the door at sea level, with or without camera installed, and take it to high altitude, it will bulge and "blow out" (i.e. like bringing a bag of chips up to the top of a mountain)If you close the door at high altitude with no camera installed, and come down to sea level, it will bulge inwards.If you close the door at cold weather, and turn camera on, it will bulge out slightly (i.e. like heating up food in a closed Tupperware)If you plan to use the camera in any such scenarios, we recommend that you do not use the LCD touch door, but rather the fully sealed waterproof door or skeleton back door.To avoid damaging the plastic film during travel, be sure to either detach the backdoor from the housing or leave the housing open. You should also be sure to seal the housing in a warm environment and power on the camera to let the air in the housing warm up before taking it out into cold weather."Edit:Kit comes with a short mount extension. Out of the box gopros come with a 90 degree turned extension. This one is straight. Also, double-tapping the screen goes between live view and playback. Holding the side display button for 3 seconds turns it off.