dfrobot i2c lcd displays brands

Have you been fed up with Black/White LCD screen? Do you want to try a colorful one? DFRobot I2C 16x2 Arduino LCD with RGB Backlight Display module will bring you a new experience about screen. It comes with RGB full color backlight, which has 16 million kinds of color.

Usually, Arduino LCD display projects will run out of pin resources easily, especially with Arduino Uno. And it is also very complicated with the wire soldering and connection. This I2C 16x2 LCD Screen is using an I2C communication interface. It means it only needs 4 pins for the LCD display: VCC, GND, SDA, SCL. It will saves at least 4 digital / analog pins on Arduino. And Gravity interface make it easier to use with our Gravity: IO expansion shield.

This type of LCD display is very widespread in Arduino projects but unfortunately consumes a lot of Inputs/Outputs, hence the interest of an I2C backpack allowing to reduce four-wire connections (SDA and SCL, ground and power supply) between Arduino and I2C display. It is also well known that the fewer the wires, the easier the connection.

The I2C interface on the back uses a 2.54mm impaction, which allows the use dupont connectors to make connections on breadboard (or directly on an Arduino).

The advantage of an I2C bus is that it allows you to connect several peripherals on the same bus ... as long as each peripheral has a unique address on the bus.

Referring to the LCD16020, I believe that everyone is not unfamiliar with the square shape, green color, a row of 2.54 pin header.... LCD1602 module is a product of the DFRobot Gravity I2C series, which has been greatly optimised for its original LCD1602 appearance. This module does not need to adjust the contrast, retain the backlight controllable function, and simultaneously compatible with 3.3V and 5V voltage. The optimisation of function and the appearance will bring you the different experience.

Gravity: I2C LCD1602 Arduino LCD Display Module (Green) Click a star to leave your reviewWorst experience possibleA bad experienceA moderate experienceA satisfied experienceA very positive experience

Accustomed to the same LCD screen, do you want to have a different experience? DFRobot LCD1602 will bring you a new visual feeling, It is not the same as the previous LCD monochrome screen, supports RGB full-color font, can provide 16 million kinds of color combinations. DFRobot Gravity I2C 16x2 Arduino LCD with RGB Font Display use universal Gravity I2C interface, it means only two communication lines, you can realise communication and backlight control. The LCD screen can display 2x16 characters, support screen scrolling, cursor movement and other functions. Through dedicated Arduino library, you can complete all the design without cumbersome wiring and complex code.

Gravity: I2C 16x2 Arduino LCD with RGB Font Display (Black) Click a star to leave your reviewWorst experience possibleA bad experienceA moderate experienceA satisfied experienceA very positive experience

Gravity 1602 LCD DisplayIt is a product of the DFRbotbot Gravity IIC series and has been greatly optimized. The LCD has 16x02 characters. This module does not need to adjust the contrast, maintain the backlight control function, and be compatible with 3.3V and 5V voltage at the same time. Optimization of function and appearance will bring you a different experience.