distinguish between crt and lcd monitors for sale

CRT and LCD are both display devices. CRT is an old technology whereas LCD is modern one. One major difference between CRT and LCD is in the technology used for image formation. The CRT display produces an image by using an electron beam, while LCD display produces an image on the screen using liquid crystal display.

CRT stands for Cathode Ray Tube. CRT displays produce an image on the screen by using a sharp beam of electrons that is highly focused to hit a phosphor screen present in front of the tube. The important components of a CRT are electron gun, focusing mechanism, and phosphor screen.

CRT was used in earlier TVs and computer monitors. CRT produces poor quality images on the screen and also consumes large electricity. The lifespan of CRT displays is very short. Because of all reasons, CRTs are being replaced by other display technologies these days.

LCD stands for Liquid Crystal Display. In LCD, liquid crystals are used to produce images on the screen. LCD displays are thin and more energy efficient, thus they are used in several small sized devices like mobiles, laptops, TVs, desktop computer monitors, calculators, etc.

In LCDs, light is obtained from external sources, and then it is converted into a definite graphics pattern using optical effects. LCDs have several advantages over CRT such as less power consumption, faster response, smaller size, low cost, etc.

Both CRT and LCD have their own advantages and disadvantages. However, these days, CRTs have almost become extinct. No one seems to be using them anymore. LCDs and other display technologies have replaced them because the new devices are highly efficient in terms of cost, power, and performance.

CRT stands for Cathode Ray Tube and LCD stands for Liquid Crystal Display area unit the kinds of display devices wherever CRT is employed as standard display devices whereas LCD is more modern technology. These area unit primarily differentiated supported the fabric they’re made from and dealing mechanism, however, each area unit alleged to perform identical perform of providing a visible variety of electronic media. Here, the crucial operational distinction is that the CRT integrates the 2 processes lightweight generation and lightweight modulation and it’s additionally managed by one set of elements. Conversely, the LCD isolates the 2 processes kind one another that’s lightweight generation and modulation.

Since the production of cathode ray tubes has essentially halted due to the cost and environmental concerns, CRT-based monitors are considered an outdated technology. All laptops and most desktop computer systems sold today come with LCD monitors. However, there are a few reasons why you might still prefer CRT over LCD displays.

While CRT monitors provide better color clarity and depth, the fact that manufacturers rarely make them anymore makes CRTs an unwise choice. LCD monitors are the current standard with several options. LCD monitors are smaller in size and easier to handle. Plus, you can buy LCD monitors in a variety of sizes, so customizing your desktop without all the clutter is easy.

The primary advantage that CRT monitors hold over LCDs is color rendering. The contrast ratios and depths of colors displayed on CRT monitors are better than what an LCD can render. For this reason, some graphic designers use expensive and large CRT monitors for their work. On the downside, the color quality degrades over time as the phosphors in the tube break down.

Another advantage that CRT monitors hold over LCD screens is the ability to easily scale to various resolutions. By adjusting the electron beam in the tube, the screen can be adjusted downward to lower resolutions while keeping the picture clarity intact. This capability is known as multisync.

The biggest disadvantage of CRT monitors is the size and weight of the tubes. An equivalently sized LCD monitor can be 80% smaller in total mass. The larger the screen, the bigger the size difference. CRT monitors also consume more energy and generate more heat than LCD monitors.

For the most vibrant and rich colors, CRTs are hard to beat if you have the desk space and don"t mind the excessive weight. However, with CRTs becoming a thing of the past, you may have to revisit the LCD monitor.

The biggest advantage of LCD monitors is the size and weight. LCD screens also tend to produce less eye fatigue. The constant light barrage and scan lines of a CRT tube can cause strain on heavy computer users. The lower intensity of the LCD monitors coupled with the constant screen display of pixels being on or off is easier on the eyes. That said, some people have issues with the fluorescent backlights used in some LCD displays.

The most notable disadvantage to LCD screens is the fixed resolution. An LCD screen can only display the number of pixels in its matrix. Therefore, it can display a lower resolution in one of two ways: using only a fraction of the total pixels on the display, or through extrapolation. Extrapolation blends multiple pixels together to simulate a single smaller pixel, which often leads to a blurry or fuzzy picture.

For those who are on a computer for hours, an LCD can be an enemy. With the tendency to cause eye fatigue, computer users must be aware of how long they stare at an LCD monitor. While LCD technology is continually improving, using techniques to limit the amount of time you look at a screen alleviates some of that fatigue.

Significant improvements have been made to LCD monitors over the years. Still, CRT monitors provide greater color clarity, faster response times, and wider flexibility for video playback in various resolutions. Nonetheless, LCDs will remain the standard since these monitors are easier to manufacture and transport. Most users find LCD displays to be perfectly suitable, so CRT monitors are only necessary for those interested in digital art and graphic design.

There are two primary types of computer monitors in use today: LCD monitors and CRT monitors. Nearly every modern desktop computer is attached to an LCD monitor. This page compares the pros and cons of both the CRT type displays and LCD or flat-panel type displays. You"ll quickly discover that the LCD or flat-panel displays pretty much sell themselves and why they are the superior display used today.

LCD monitors are much thinner than CRT monitors, being only a few inches in thickness (some can be nearly 1" thick). They can fit into smaller, tighter spaces, whereas a CRT monitor can"t in most cases.

Although a CRT can have display issues, there is no such thing as a dead pixel on a CRT monitor. Many issues can also be fixed by degaussing the monitor.

LCD monitors have a slightly bigger viewable area than a CRT monitor. A 19" LCD monitor has a diagonal screen size of 19" and a 19" CRT monitor has a diagonal screens size of about 18".

A German scientist called Karl Ferdinand Braun invented the earliest version of the CRT in 1897. However, his invention was not isolated, as it was among countless other inventions that took place between the mid-1800s and the late 1900s.

CRT technology isn’t just for displays; it can also be utilized for storage. These storage tubes can hold onto a picture for as long as the tube is receiving electricity.

Like the CRT, the invention of the modern LCD was not a one-man show. It began in 1888 when the Austrian botanist and chemist Friedrich Richard Kornelius Reinitzer discovered liquid crystals.

CRT stands for cathode-ray tube, a TV or PC monitor that produces images using an electron gun. These were the first displays available, but they are now outdated and replaced by smaller, more compact, and energy-efficient LCD display monitors.

In contrast, a Liquid crystal display, or an LCD monitor, uses liquid crystals to produce sharp, flicker-free images. These are now the standard monitors that are giving the traditional CRTs a run for their money.

Although the production of CRT monitors has slowed down, due to environmental concerns and the physical preferences of consumers, they still have several advantages over the new-age LCD monitors. Below, we shed some light on the differences between CRT and LCD displays.

CRTLCDWhat it isAmong the earliest electronic displays that used a cathode ray tubeA flat-panel display that uses the light-modulating properties of liquid crystals

CRTs boast a great scaling advantage because they don’t have a fixed resolution, like LCDs. This means that CRTs are capable of handling multiple combinations of resolutions and refresh rates between the display and the computer.

In turn, the monitor is able to bypass any limitations brought about by the incompatibility between a CRT display and a computer. What’s more, CRT monitors can adjust the electron beam to reduce resolution without affecting the picture quality.

On the other hand, LCD monitors have a fixed resolution, meaning they have to make some adjustments to any images sent to them that are not in their native resolution. The adjustments include centering the image on the screen and scaling the image down to the native resolution.

CRT monitors project images by picking up incoming signals and splitting them into audio and video components. More specifically, the video signals are taken through the electron gun and into a single cathode ray tube, through a mesh, to illuminate the phosphorus inside the screen and light the final image.

The images created on the phosphor-coated screen consist of alternating red, blue, and green (RGB) lights, creating countless different hues. The electron gun emits an electron beam that scans the front of the tube repetitively to create and refresh the image at least 100 times every second.

LCD screens, on the other hand, are made of two pieces of polarized glass that house a thin layer of liquid crystals. They work on the principle of blocking light. As a result, when light from a backlight shines through the liquid crystals, the light bends to respond to the electric current.

The liquid crystal molecules are then aligned to determine which color filter to illuminate, thus creating the colors and images you see on the screen. Interestingly, you can find color filters within every pixel, which is made up of three subpixels—red, blue, and green—that work together to produce millions of different colors.

Thanks to the versatility of pixels, LCD screens offer crisper images than CRT monitors. The clarity of the images is a result of the LCD screen’s ability to produce green, blue, and red lights simultaneously, whereas CRTs need to blur the pixels and produce either of the lights exclusively.

The diversity of the pixels also ensures LCD screens produce at least twice as much brightness as CRTs. The light on these screens also remains uninterrupted by sunlight or strong artificial lighting, which reduces general blurriness and eyestrain.

Over time, however, dead pixels negatively affect the LCD screen’s visual displays. Burnout causes these dead pixels, which affect the visual clarity of your screen by producing black or other colored dots in the display.

CRT monitors also have better motion resolution compared to LCDs. The latter reduces resolution significantly when content is in motion due to the slow pixel response time, making the images look blurry or streaky.

With CRTs, you don’t experience any display lag because the images are illuminated on the screen at the speed of light, thus preventing any delays. However, lag is a common problem, especially with older LCD displays.

CRTs are prone to flickeringduring alternating periods of brightness and darkness. LCDs don’t flicker as much thanks to the liquid pixels that retain their state when the screen refreshes.

CRTs have a thick and clunky design that’s quite unappealing. The monitor has a casing or cabinet made of either plastic or metal that houses the cathode ray tube. Then there’s the neck or glass funnel, coated with a conductive coating made using lead oxide.

Leaded glass is then poured on top to form the screen, which has a curvature. In addition, the screen contributes to about 65% of the total weight of a CRT.

LCDs feature low-profile designs that make them the best choice for multiple portable display devices, like smartphones and tablets. LCD displays have a lightweight construction, are portable, and can be made into much larger sizes than the largest CRTs, which couldn’t be made into anything bigger than 40–45 inches.

The invention of the cathode ray tube began with the discovery of cathode beams by Julius Plucker and Johann Heinrich Wilhelm Geissler in 1854. Interestingly, in 1855, Heinrich constructed glass tubes and a hand-crack mercury pump that contained a superior vacuum tube, the “Geissler tube.”

Later, in 1859, Plucker inserted metal plates into the Geissler tube and noticed shadows being cast on the glowing walls of the tube. He also noticed that the rays bent under the influence of a magnet.

Sir William Crookes confirmed the existence of cathode rays in 1878 by displaying them in the “Crookes tube” and showing that the rays could be deflected by magnetic fields.

Later, in 1897, Karl Ferdinand Braun, a German physicist, invented a cathode ray tube with a fluorescent screen and named it the “Braun Tube.” By developing the cathode ray tube oscilloscope, he was the first person to endorse the use of CRT as a display device.

Later, in 1907, Boris Rosing, a Russian scientist, and Vladimir Zworykin used the cathode ray tube in the receiver of a television screen to transmit geometric patterns onto the screen.

LCD displays are a much more recent discovery compared to CRTs. Interestingly, the French professor of mineralogy, Charles-Victor Mauguin, performed the first experiments with liquid crystals between plates in 1911.

George H. Heilmeier, an American engineer, made significant enough contributions towards the LCD invention to be inducted into the Hall of Fame of National Inventors. And, in 1968, he presented the liquid crystal display to the professional world, working at an optimal temperature of 80 degrees Celsius.

Many other inventors worked towards the creation of LCDs. As a result, in the 1970s, new inventions focused on ensuring that LCD displays worked at an optimal temperature. And, in the 1980s, they perfected the crystal mixtures enough to stimulate demand and a promotion boom. The first LCDs were produced in 1971 and 1972 by ILIXCO (now LXD Incorporated).

Although they may come in at a higher price point, LCD displays are more convenient in the long run. They last almost twice as long as CRTs are energy efficient, and their compact and thin size make them ideal for modern-day use.

LCDs are also more affordable compared to other display monitors available today. So, you can go for a CRT monitor for its ease of use, faster response rates, reduced flickering, and high pixel resolution. However, we don’t see why you should look back since there are so many new options that will outperform both CRTs and LCDs.

If you are looking for a new display, you should consider the differences between CRT and LCD monitors. Choose the type of monitor that best serves your specific needs, the typical applications you use, and your budget.

Require less power - Power consumption varies greatly with different technologies. CRT displays are somewhat power-hungry, at about 100 watts for a typical 19-inch display. The average is about 45 watts for a 19-inch LCD display. LCDs also produce less heat.

Smaller and weigh less - An LCD monitor is significantly thinner and lighter than a CRT monitor, typically weighing less than half as much. In addition, you can mount an LCD on an arm or a wall, which also takes up less desktop space.

More adjustable - LCD displays are much more adjustable than CRT displays. With LCDs, you can adjust the tilt, height, swivel, and orientation from horizontal to vertical mode. As noted previously, you can also mount them on the wall or on an arm.

Less eye strain - Because LCD displays turn each pixel off individually, they do not produce a flicker like CRT displays do. In addition, LCD displays do a better job of displaying text compared with CRT displays.

Better color representation - CRT displays have historically represented colors and different gradations of color more accurately than LCD displays. However, LCD displays are gaining ground in this area, especially with higher-end models that include color-calibration technology.

More responsive - Historically, CRT monitors have had fewer problems with ghosting and blurring because they redrew the screen image faster than LCD monitors. Again, LCD manufacturers are improving on this with displays that have faster response times than they did in the past.

Multiple resolutions - If you need to change your display"s resolution for different applications, you are better off with a CRT monitor because LCD monitors don"t handle multiple resolutions as well.

So now that you know about LCD and CRT monitors, let"s talk about how you can use two monitors at once. They say, "Two heads are better than one." Maybe the same is true of monitors!

Distinguish, differentiate, compare and explain what is the differences between CRT and LCD Monitor. Comparison and Difference. As the technology has improved and the prices have come down, LCD (Liquid Crystal Display) monitors have rapidly been replacing CRT (Cathode Ray Tube) monitors on desktops around the world. ComputerWorld first reported that LCD sales would surpass CRT sales for the first time in 2003, a lead that it didnt hold for good. But according to DisplaySearch, a flat panel display market research and consulting company, the sales of LCD monitors regained the lead over CRT sales in the third quarter of 2004, a lead that it should eventually hold for good.

Summary: Difference Between CRT and LCD is that CRTis a desktop/pc monitor that contains a cathode-ray tube. A cathode-ray tube (CRT) is a large, sealed glass tube.

Picture slightly less natural and “filmlike” than plasmas; slower refresh rate; limited viewing angle; blacks are brighter; susceptible to burn-out and image persistence; dead or stuck pixels may appear

Responsible for performing installations and repairs (motors, starters, fuses, electrical power to machine etc.) for industrial equipment and machines in order to support the achievement of Nelson-Miller’s business goals and objectives:

• Perform highly diversified duties to install and maintain electrical apparatus on production machines and any other facility equipment (Screen Print, Punch Press, Steel Rule Die, Automated Machines, Turret, Laser Cutting Machines, etc.).

• Provide electrical emergency/unscheduled diagnostics, repairs of production equipment during production and performs scheduled electrical maintenance repairs of production equipment during machine service.

If you are shopping for a display, you may look to compare LCD vs CRT computer monitors. Some of the best computer monitors come in a wide variety of styles and design types. Keep reading to learn the difference between these two types of monitors.

CRT displays, however, are known for superior color rendering performance and for offering high refresh rates. We have a whole page dedicated to explaining what a CRT monitor is if you’re curious.

CRT monitors are bad for the environment, as they draw a whole lot of power during use. To help reduce humanity’s carbon footprint through tech products, there are opportunities for computer monitor recycling.

There are multiple distinctions to be made between LCD and CRT monitors, as well as LCD vs LED monitors, but that’s for another post. A liquid crystal display (LCD) has liquid crystals squeezed between two sheets of glass along with an electron gun that shoots an electron beam, while a CRT (cathode ray tube) monitor features a number of cathode-ray tubes. This overall difference in design leads to widely different use case scenarios, such as when you are comparing LCD vs LED monitors for gaming.

Despite being an older technology, CRT monitors are quite capable when it comes to rendering accurate colors. As a matter of fact, many creative professionals opt for expensive newly made CRT screens over LCD technology, LED screens, or even OLED displays for just this reason. Another advantage to the bright and vivid colors found with CRT displays is that they slightly reduce eye fatigue, which can be a handy bit of information if you are comparing LCD vs LED monitors for eye strain. The downside here is that CRT monitors are fragile, so this color accuracy will break down over time as the phosphor tubes degrade.

Another surprising feature of CRT monitors is their ultra-fast refresh rates. Due to the nature of the design, they offer higher refresh rates than LCD screens, as the light has a shorter route to travel.

There is no way around it. Cathode tubes are extremely large and extremely heavy, making CRT monitors an absolute beast to haul around and to place in your workspace. LCD screens, on the other hand, are light and portable, easily fitting just about anywhere.

In most cases, LCD monitors will offer a much larger field of view for viewing image and video than CRT displays, due to the nature of the design of the flat screen. Something like an LCD screen would come in handy as a gaming monitor. The larger the field of view with a CRT, the heavier and bulkier it will be.

CRT monitors are made from multiple materials that are relatively tough to source and they draw a whole lot of power during use. In other words, they are not too great for the environment.

Cathode Ray Tubes (CRT) were once the only way to convey pictures. They are large, bulky and consume a lot of power. Liquid Crystal Displays or more commonly known as LCDs are beginning to replace CRTs in most applications today. They are essentially the reverse of what CRTs are, light, thin, and energy efficient. Also, because of the high power consumption of CRT displays, it needs to dissipate a greater amount of energy which makes it run hotter compared to LCDs.

The only aspect where CRT wins over LCD in performance is in the response time. Older LCDs have been plagued with very slow response times that create ghosting effects on the screen whenever there is high speed motion. This made early LCD screens unsuitable for most gaming needs and even in viewing movies, but newer LCDs have improved on it and this is no longer such a big issue.

Understandably, LCDs cost significantly more compared to CRTs in displays of the same size due to the more complex production process that is needed to produce LCDs. But consumers often rationalize that the extra cost is recovered after a while due to the significantly lower power consumption. The physical dimensions of the LCD also meant that it is usable in so many applications where CRTs would simply be impractical to use. Aside from the usual TV screen or computer monitor, LCDs are also used in mobile phones, digital cameras, music players, GPS navigators, and so much more.

A problem that is unique to LCD screens is the dead pixel, which is unheard of in CRT screens. Since LCDs are a matrix of pixels, one or more of these pixels may not function due to irregularities in the production process. This leaves a small dot on the screen that doesn’t change with the display, appearing like a small piece of dirt stuck in there. Most manufacturers would accept and replace screens that have dead pixels in them but it is always best to inquire about the warranty and their dead pixel policy.

The crucial difference between CRT and LCD exist in their image forming technique. CRT displays image on the screen by making use of electron beam, however, LCD utilizes liquid crystals for the formation of an image on the screen.

Another major difference that exists between CRT and LCD is their size and dimension. CRT monitors are thicker and heavier but small in size than that of LCD.

We will discuss some other important differences between CRT and LCD but before that have a look at the rough draft of the contents to be discussed under this article.

DisadvantagesHeavy, gets heated at rapid rate during operation.Provides fixed aspect ratio and resolution, requires large area, operating temperature is limited between 0 -60 degrees.

CRT is expanded as Cathode ray tube. It is a vacuum tube that produces images when a sharp beam of the electron which is highly focused hits the phosphor screen that is present at the front-end of the tube.

It consists of certain basic components that are responsible for the generation of an image on the screen. The figure below shows internal system involved in a CRT:

An electron gun assembly is present that produces a sharp beam of electrons. These electrons when moves inside the tube experience acceleration by the anode and focused towards the screen.

The two deflection plates are the reason for the movement of the beam horizontally and vertically. However, as the two movements are not dependent on each other thus the beam after hitting the screen, gets fixed anywhere on it.

When we talk about the screen of CRT then it is basically termed as the faceplate. The inner surface where the beam strikes is basically a phosphor coating. This phosphor is responsible for the conversion of electrical energy generated by the movement of the electron beam into light energy.

It is noteworthy in case of CRT that phosphor screen generates secondary electrons when electron beam hits it. So, in order to sustain an electrical equilibrium, the secondary emitted electrons must be collected which is done by aquadag.

LCD stands for Liquid Crystal Display. In LCD liquid crystal is utilized in order to generate a definite image on the screen. Liquid crystal is basically termed as the fourth state of matter. It permits the display to be very thin and thus supports numerous applications.

When we talk about LCD then its principle of working is such that light energy is not produced by LCD, despite light energy generated by an external source is controlled in order to have light or dark appearance at some particular areas.

Here, a layer of liquid crystal is placed between 2 polarizing films. When light emitted by an external source falls on the layer of liquid crystal then their combination generates a coloured visible image that is displayed on the screen.

An external potential is provided to the liquid crystal. This potential changes the orientation of the molecules. After this polarized light is passed to the crystal that generates bright and dark spots at the screen of the display.

One of the excellent property of LCD over CRT is its antiglare property. LCD screen more efficiently reduces the glare generated by light as compared to CRT.

CRT is more dominant to flickering as it possesses a low refresh rate that causes a drop in image brightness that is easily recognized by naked eyes.As against, flickering is not that much higher in LCD due to its high refresh rate.

CRT and LCD both have their separate advantages and disadvantage over the image formation technique. But LCD has replaced CRT very efficiently in the recent era. Despite LCD is more costly than CRT but due to its better image display and almost negligible flickering property, it is widely used.

Text and images (scans of census records) are crisper and sharper and the LCD monitor is easier on your eyes. Monitor"s size: Traditional monitors are similar to a TV because both of them have the CRT (Cathode Ray Tube). That is the reason for its bigger size. It therefore occupies more space at the desk. It is also heavy.

However, LCD monitors have thin flat screen. Therefore occupies very less space and is lighter than the CRT monitor. LCD monitors can be fixed even on wall. Display Size: Even though the display size of a CRT monitor is calculated diagonally, the actual display size is smaller. For instance a 17" CRT monitor will actually have a display size of only 16" However, the display size of 17" LCD monitor will have 17" display size. Resolution: CRT monitors can show different resolutions. The resolution can be changed as required. LCD Monitors will have Native Resolution and therefore has a fixed resolution. The best resolution will be the native resolution for that LCD monitor. Viewing Direction: A CRT screen can be viewed from all directions. And from different distance. But LCD monitors cannot be viewed from all directions. LCD monitors can only be viewed straight. Therefore its viewing direction is limited. If viewed from other directions the colors will change and sometimes the vision will be unclear if not viewed straight. But in recent years the new LCD monitors have improved on this defect. Radiation Emission: The radiation emission in CRT monitors are higher. This will not be visible normally but it will affect eyesight and may cause head ache. Long term use of these monitors may even affect the eyes adversely. LCD monitors do not have this type of Radiation emission. Therefore LCD monitors are good for the eyes. Price: CRT monitors are priced very cheap. However they consume more power. LCD monitors are priced higher, but they consume less electricity. Though the electricity consumption is not very significant for personal use, it is very cost efficient in big organizations with many computers.

Text and images (scans of census records) are crisper and sharper and the LCD monitor is easier on your eyes. Dot pitch: This is the space between dots and is measured in fractions of a millimeter, e.g., .25mm. The smaller the number the better because the dots are tighter. Many manufacturers don%u2019t even list the dot pitch anymore and you probably won%u2019t be able to tell the difference between a .22 and .27 pitch anyway. So, if you like the monitor then don%u2019t worry about the dot pitch. Passive-matrix vs. active-matrix: Do not buy a passive-matrix monitor. I seriously doubt you%u2019ll even see one for sale, but%u2026just in case. Having said that, there are some new passive-matrix technologies that are worth buying. If the monitor isn"t TFT (a type of active-matrix), look for CSTN or DSTN (the latest passive technologies). Brightness: How bright is the picture, expressed as cd/m (I have no idea what the units mean). Look for a brightness level of 200 cd/m or greater. Again, if the monitor specs don%u2019t list this value (not all do) be sure you can get your money back. If the lighting in your office (kitchen table) is subdued the brightness factor won%u2019t be as important as if you have a lot of sunlight streaming in. Don%u2019t pay extra for extra brightness unless you%u2019re worried about bright sunlight. Overall, the contrast ratio will have a bigger impact on picture quality. Monitor"s size: Traditional monitors are similar to a TV because both of them have the CRT (Cathode Ray Tube). That is the reason for its bigger size. It therefore occupies more space at the desk. It is also heavy. However, LCD monitors have thin flat screen. Therefore occupies very less space and is lighter than the CRT monitor. LCD monitors can be fixed even on wall. Display Size: Even though the display size of a CRT monitor is calculated diagonally, the actual display size is smaller. For instance a 17" CRT monitor will actually have a display size of only 16" However, the display size of 17" LCD monitor will have 17" display size. Resolution: CRT monitors can show different resolutions. The resolution can be changed as required. LCD Monitors will have Native Resolution and therefore has a fixed resolution. The best resolution will be the native resolution for that LCD monitor.

Speaking of easy on your eyes, there isn"t any glare, and the flat screen means no distortion. By the way, even those expensive old-fashioned flat screen CRT monitors have some distortion. Monitor"s size: Traditional monitors are similar to a TV because both of them have the CRT (Cathode Ray Tube). That is the reason for its bigger size. It therefore occupies more space at the desk. It is also heavy. However, LCD monitors have thin flat screen. Therefore occupies very less space and is lighter than the CRT monitor. LCD monitors can be fixed even on wall. Display Size: Even though the display size of a CRT monitor is calculated diagonally, the actual display size is smaller. For instance a 17" CRT monitor will actually have a display size of only 16" However, the display size of 17" LCD monitor will have 17" display size. Resolution: CRT monitors can show different resolutions. The resolution can be changed as required. LCD Monitors will have Native Resolution and therefore has a fixed resolution. The best resolution will be the native resolution for that LCD monitor. Viewing Direction: A CRT screen can be viewed from all directions. And from different distance. But LCD monitors cannot be viewed from all directions. LCD monitors can only be viewed straight. Therefore its viewing direction is limited. If viewed from other directions the colors will change and sometimes the vision will be

Resolution on a CRT is flexible and a newer model will provide you with viewing resolutions of up to 1600 by 1200 and higher, whereas on an LCD the resolution is fixed within each monitor (called a native resolution). The resolution on an LCD can be changed, but if you’re running it at a resolution other than its native resolution you will notice a drop in performance or quality.

Both types of monitors (newer models) provide bright and vibrant color display. However, LCDs cannot display the maximum color range that a CRT can. In terms of image sharpness, when an LCD is running at its native resolution the picture quality is perfectly sharp. On a CRT the sharpness of the picture can be blemished by soft edges or a flawed focus.

A CRT monitor can be viewed from almost any angle, but with an LCD this is often a problem. When you use an LCD, your view changes as you move different angles and distances away from the monitor. At some odd angles, you may notice the picture fade, and possibly look as if it will disappear from view.

Some users of a CRT may notice a bit of an annoying flicker, which is an inherent trait based on a CRTs physical components. Today’s graphics cards, however, can provide a high refresh rate signal to the CRT to get rid of this otherwise annoying problem. LCDs are flicker-free and as such the refresh rate isn’t an important issue with LCDs.

Dot pitch refers to the space between the pixels that make up the images on your screen, and is measured in millimeters. The less space between pixels, the better the image quality. On either type of monitor, smaller dot pitch is better and you’re going to want to look at something in the 0.26 mm dot pitch or smaller range.

Most people today tend to look at a 17-inch CRT or bigger monitor. When you purchase a 17-inch CRT monitor, you usually get 16.1 inches or a bit more of actual viewing area, depending on the brand and manufacturer of a specific CRT. The difference between the “monitor size” and the “view area” is due to the large bulky frame of a CRT. If you purchase a 17″ LCD monitor, you actually get a full 17″ viewable area, or very close to a 17″.

There is no denying that an LCD wins in terms of its physical size and the space it needs. CRT monitors are big, bulky and heavy. They are not a good choice if you’re working with limited desk space, or need to move the monitor around (for some odd reason) between computers. An LCD on the other hand is small, compact and lightweight. LCDs are thin, take up far less space and are easy to move around. An average 17-inch CRT monitor could be upwards of 40 pounds, while a 17&-inch LCD would weigh in at around 15 pounds.

As an individual one-time purchase an LCD monitor is going to be more expensive. Throughout a lifetime, however, LCDs are cheaper as they are known to have a longer lifespan and also a lower power consumption. The cost of both technologies have come down over the past few years, and LCDs are reaching a point where smaller monitors are within many consumers’ price range. You will pay more for a 17″ LCD compared to a 17″ CRT, but since the CRT’s actual viewing size is smaller, it does bring the question of price back into proportion. Today, fewer CRT monitors are manufactured as the price on LCDs lowers and they become mainstream.

In the past, CRT monitors were the only choice for desktop systems, while LCDs were built into laptops. By the late 1990s, people could choose between the two. As technology has improved, it"s actually become more difficult to buy new CRTs, while flat screens have become the standard. Although LCDs were once quite expensive, prices have dropped considerably. CRTs still have pros, however, including clarity and reliability.

The traditional CRT monitor resembles a television set and uses the same technology. They have many pros: they are inexpensive, dependable, have good clear pictures and can be viewed from any angle. Unfortunately, they are also heavy, have a large footprint, aren"t environmentally friendly, and emit a fair amount of low-frequency radiation thought to be unhealthy.

As the technology improved, however, LCDs improved in all areas with sales overtaking CRTs in 2003. Even with these improvements, arguments continue that CRTs remain better suited to graphics professionals and to those who require consistent color regardless of viewing angle. Video editors, game developers or anyone who works with fast moving images in a professional capacity might also prefer a CRT, though it seems safe to assume diehard devotees have shrunk over the years. The remaining draw for the older technology is cost, appealing to those on a budget or to those who only use their computers infrequently, as a used CRT can be picked up for next to nothing. The price for new LCDs has dropped dramatically in recent years, however.

Nevertheless, the contest between the two is over for most. LCD monitors have extraordinary color and graphics with much crisper text and a screen that is easier on the eyes, reducing strain and headaches that sometimes accompanied long hours on a CRT. They are also great for long hours in text-based applications like word processors or spreadsheets, and they don"t require anti-radiation screens.

Choosing a model with a wide viewing angle effectively eliminates "wash out," while faster response rates have eliminated ghosting. With reduced eyestrain, great color, and virtually no fading or ghosting, a good LCD is a great choice for the whole family. Whether gaming, putting together a family photo album, surfing, doing homework or writing out proposals for work, the LCD will take up less space while using less electricity and emitting less radiation.

Because of its many advantages, LCDs have essentially overtaken CRT technology. Aside from graphics professionals, deciding between an LCD or CRT today might apply best in nations or regions where digital displays are scarce and the application requires the least expensive option, like in rural schools or non-profit and humanitarian aid organizations in third world nations. In these cases, the dutiful CRT will serve well and may be purchased inexpensively.

People who are interested in purchasing an LCD monitor should note that standardization in specifications is lacking. A viewing angle might actually be greater than advertised, or narrower. Response rates can also vary from manufacturer to manufacturer, so a direct comparison between different models can be misleading when judging from specs alone. Shoppers may find it helpful to read reviews from people who already own the product, along with professional reviews.

Glass substrate with ITO electrodes. The shapes of these electrodes will determine the shapes that will appear when the LCD is switched ON. Vertical ridges etched on the surface are smooth.

A liquid-crystal display (LCD) is a flat-panel display or other electronically modulated optical device that uses the light-modulating properties of liquid crystals combined with polarizers. Liquid crystals do not emit light directlybacklight or reflector to produce images in color or monochrome.seven-segment displays, as in a digital clock, are all good examples of devices with these displays. They use the same basic technology, except that arbitrary images are made from a matrix of small pixels, while other displays have larger elements. LCDs can either be normally on (positive) or off (negative), depending on the polarizer arrangement. For example, a character positive LCD with a backlight will have black lettering on a background that is the color of the backlight, and a character negative LCD will have a black background with the letters being of the same color as the backlight. Optical filters are added to white on blue LCDs to give them their characteristic appearance.

LCDs are used in a wide range of applications, including LCD televisions, computer monitors, instrument panels, aircraft cockpit displays, and indoor and outdoor signage. Small LCD screens are common in LCD projectors and portable consumer devices such as digital cameras, watches, calculators, and mobile telephones, including smartphones. LCD screens have replaced heavy, bulky and less energy-efficient cathode-ray tube (CRT) displays in nearly all applications. The phosphors used in CRTs make them vulnerable to image burn-in when a static image is displayed on a screen for a long time, e.g., the table frame for an airline flight schedule on an indoor sign. LCDs do not have this weakness, but are still susceptible to image persistence.

Each pixel of an LCD typically consists of a layer of molecules aligned between two transparent electrodes, often made of Indium-Tin oxide (ITO) and two polarizing filters (parallel and perpendicular polarizers), the axes of transmission of which are (in most of the cases) perpendicular to each other. Without the liquid crystal between the polarizing filters, light passing through the first filter would be blocked by the second (crossed) polarizer. Before an electric field is applied, the orientation of the liquid-crystal molecules is determined by the alignment at the surfaces of electrodes. In a twisted nematic (TN) device, the surface alignment directions at the two electrodes are perpendicular to each other, and so the molecules arrange themselves in a helical structure, or twist. This induces the rotation of the polarization of the incident light, and the device appears gray. If the applied voltage is large enough, the liquid crystal molecules in the center of the layer are almost completely untwisted and the polarization of the incident light is not rotated as it passes through the liquid crystal layer. This light will then be mainly polarized perpendicular to the second filter, and thus be blocked and the pixel will appear black. By controlling the voltage applied across the liquid crystal layer in each pixel, light can be allowed to pass through in varying amounts thus constituting different levels of gray.

The chemical formula of the liquid crystals used in LCDs may vary. Formulas may be patented.Sharp Corporation. The patent that covered that specific mixture expired.

Most color LCD systems use the same technique, with color filters used to generate red, green, and blue subpixels. The LCD color filters are made with a photolithography process on large glass sheets that are later glued with other glass sheets containing a TFT array, spacers and liquid crystal, creating several color LCDs that are then cut from one another and laminated with polarizer sheets. Red, green, blue and black photoresists (resists) are used. All resists contain a finely ground powdered pigment, with particles being just 40 nanometers across. The black resist is the first to be applied; this will create a black grid (known in the industry as a black matrix) that will separate red, green and blue subpixels from one another, increasing contrast ratios and preventing light from leaking from one subpixel onto other surrounding subpixels.Super-twisted nematic LCD, where the variable twist between tighter-spaced plates causes a varying double refraction birefringence, thus changing the hue.

LCD in a Texas Instruments calculator with top polarizer removed from device and placed on top, such that the top and bottom polarizers are perpendicular. As a result, the colors are inverted.

The optical effect of a TN device in the voltage-on state is far less dependent on variations in the device thickness than that in the voltage-off state. Because of this, TN displays with low information content and no backlighting are usually operated between crossed polarizers such that they appear bright with no voltage (the eye is much more sensitive to variations in the dark state than the bright state). As most of 2010-era LCDs are used in television sets, monitors and smartphones, they have high-resolution matrix arrays of pixels to display arbitrary images using backlighting with a dark background. When no image is displayed, different arrangements are used. For this purpose, TN LCDs are operated between parallel polarizers, whereas IPS LCDs feature crossed polarizers. In many applications IPS LCDs have replaced TN LCDs, particularly in smartphones. Both the liquid crystal material and the alignment layer material contain ionic compounds. If an electric field of one particular polarity is applied for a long period of time, this ionic material is attracted to the surfaces and degrades the device performance. This is avoided either by applying an alternating current or by reversing the polarity of the electric field as the device is addressed (the response of the liquid crystal layer is identical, regardless of the polarity of the applied field).

Displays for a small number of individual digits or fixed symbols (as in digital watches and pocket calculators) can be implemented with independent electrodes for each segment.alphanumeric or variable graphics displays are usually implemented with pixels arranged as a matrix consisting of electrically connected rows on one side of the LC layer and columns on the other side, which makes it possible to address each pixel at the intersections. The general method of matrix addressing consists of sequentially addressing one side of the matrix, for example by selecting the rows one-by-one and applying the picture information on the other side at the columns row-by-row. For details on the various matrix addressing schemes see passive-matrix and active-matrix addressed LCDs.

LCDs are manufactured in cleanrooms borrowing techniques from semiconductor manufacturing and using large sheets of glass whose size has increased over time. Several displays are manufactured at the same time, and then cut from the sheet of glass, also known as the mother glass or LCD glass substrate. The increase in size allows more displays or larger displays to be made, just like with increasing wafer sizes in semiconductor manufacturing. The glass sizes are as follows:

Until Gen 8, manufacturers would not agree on a single mother glass size and as a result, different manufacturers would use slightly different glass sizes for the same generation. Some manufacturers have adopted Gen 8.6 mother glass sheets which are only slightly larger than Gen 8.5, allowing for more 50 and 58 inch LCDs to be made per mother glass, specially 58 inch LCDs, in which case 6 can be produced on a Gen 8.6 mother glass vs only 3 on a Gen 8.5 mother glass, significantly reducing waste.AGC Inc., Corning Inc., and Nippon Electric Glass.

The origins and the complex history of liquid-crystal displays from the perspective of an insider during the early days were described by Joseph A. Castellano in Liquid Gold: The Story of Liquid Crystal Displays and the Creation of an Industry.IEEE History Center.Peter J. Wild, can be found at the Engineering and Technology History Wiki.

In 1888,Friedrich Reinitzer (1858–1927) discovered the liquid crystalline nature of cholesterol extracted from carrots (that is, two melting points and generation of colors) and published his findings at a meeting of the Vienna Chemical Society on May 3, 1888 (F. Reinitzer: Beiträge zur Kenntniss des Cholesterins, Monatshefte für Chemie (Wien) 9, 421–441 (1888)).Otto Lehmann published his work "Flüssige Kristalle" (Liquid Crystals). In 1911, Charles Mauguin first experimented with liquid crystals confined between plates in thin layers.

In 1922, Georges Friedel described the structure and properties of liquid crystals and classified them in three types (nematics, smectics and cholesterics). In 1927, Vsevolod Frederiks devised the electrically switched light valve, called the Fréedericksz transition, the essential effect of all LCD technology. In 1936, the Marconi Wireless Telegraph company patented the first practical application of the technology, "The Liquid Crystal Light Valve". In 1962, the first major English language publication Molecular Structure and Properties of Liquid Crystals was published by Dr. George W. Gray.RCA found that liquid crystals had some interesting electro-optic characteristics and he realized an electro-optical effect by generating stripe-patterns in a thin layer of liquid crystal material by the application of a voltage. This effect is based on an electro-hydrodynamic instability forming what are now called "Williams domains" inside the liquid crystal.

In 1964, George H. Heilmeier, then working at the RCA laboratories on the effect discovered by Williams achieved the switching of colors by field-induced realignment of dichroic dyes in a homeotropically oriented liquid crystal. Practical problems with this new electro-optical effect made Heilmeier continue to work on scattering effects in liquid crystals and finally the achievement of the first operational liquid-crystal display based on what he called the George H. Heilmeier was inducted in the National Inventors Hall of FameIEEE Milestone.

In the late 1960s, pioneering work on liquid crystals was undertaken by the UK"s Royal Radar Establishment at Malvern, England. The team at RRE supported ongoing work by George William Gray and his team at the University of Hull who ultimately discovered the cyanobiphenyl liquid crystals, which had correct stability and temperature properties for application in LCDs.

The idea of a TFT-based liquid-crystal display (LCD) was conceived by Bernard Lechner of RCA Laboratories in 1968.dynamic scattering mode (DSM) LCD that used standard discrete MOSFETs.

On December 4, 1970, the twisted nematic field effect (TN) in liquid crystals was filed for patent by Hoffmann-LaRoche in Switzerland, (Swiss patent No. 532 261) with Wolfgang Helfrich and Martin Schadt (then working for the Central Research Laboratories) listed as inventors.Brown, Boveri & Cie, its joint venture partner at that time, which produced TN displays for wristwatches and other applications during the 1970s for the international markets including the Japanese electronics industry, which soon produced the first digital quartz wristwatches with TN-LCDs and numerous other products. James Fergason, while working with Sardari Arora and Alfred Saupe at Kent State University Liquid Crystal Institute, filed an identical patent in the United States on April 22, 1971.ILIXCO (now LXD Incorporated), produced LCDs based on the TN-effect, which soon superseded the poor-quality DSM types due to improvements of lower operating voltages and lower power consumption. Tetsuro Hama and Izuhiko Nishimura of Seiko received a US patent dated February 1971, for an electronic wristwatch incorporating a TN-LCD.

In 1972, the concept of the active-matrix thin-film transistor (TFT) liquid-crystal display panel was prototyped in the United States by T. Peter Brody"s team at Westinghouse, in Pittsburgh, Pennsylvania.Westinghouse Research Laboratories demonstrated the first thin-film-transistor liquid-crystal display (TFT LCD).high-resolution and high-quality electronic visual display devices use TFT-based active matrix displays.active-matrix liquid-crystal display (AM LCD) in 1974, and then Brody coined the term "active matrix" in 1975.

In 1972 North American Rockwell Microelectronics Corp introduced the use of DSM LCDs for calculators for marketing by Lloyds Electronics Inc, though these required an internal light source for illumination.Sharp Corporation followed with DSM LCDs for pocket-sized calculators in 1973Seiko and its first 6-digit TN-LCD quartz wristwatch, and Casio"s "Casiotron". Color LCDs based on Guest-Host interaction were invented by a team at RCA in 1968.TFT LCDs similar to the prototypes developed by a Westinghouse team in 1972 were patented in 1976 by a team at Sharp consisting of Fumiaki Funada, Masataka Matsuura, and Tomio Wada,

In 1983, researchers at Brown, Boveri & Cie (BBC) Research Center, Switzerland, invented the passive matrix-addressed LCDs. H. Amstutz et al. were listed as inventors in the corresponding patent applications filed in Switzerland on July 7, 1983, and October 28, 1983. Patents were granted in Switzerland CH 665491, Europe EP 0131216,

The first color LCD televisions were developed as handheld televisions in Japan. In 1980, Hattori Seiko"s R&D group began development on color LCD pocket televisions.Seiko Epson released the first LCD television, the Epson TV Watch, a wristwatch equipped with a small active-matrix LCD television.dot matrix TN-LCD in 1983.Citizen Watch,TFT LCD.computer monitors and LCD televisions.3LCD projection technology in the 1980s, and licensed it for use in projectors in 1988.compact, full-color LCD projector.

In 1990, under different titles, inventors conceived electro optical effects as alternatives to twisted nematic field effect LCDs (TN- and STN- LCDs). One approach was to use interdigital electrodes on one glass substrate only to produce an electric field essentially parallel to the glass substrates.Germany by Guenter Baur et al. and patented in various countries.Hitachi work out various practical details of the IPS technology to interconnect the thin-film transistor array as a matrix and to avoid undesirable stray fields in between pixels.

Hitachi also improved the viewing angle dependence further by optimizing the shape of the electrodes (Super IPS). NEC and Hitachi become early manufacturers of active-matrix addressed LCDs based on the IPS technology. This is a milestone for implementing large-screen LCDs having acceptable visual performance for flat-panel computer monitors and television screens. In 1996, Samsung developed the optical patterning technique that enables multi-domain LCD. Multi-domain and In Plane Switching subsequently remain the dominant LCD designs through 2006.South Korea and Taiwan,

In 2007 the image quality of LCD televisions surpassed the image quality of cathode-ray-tube-based (CRT) TVs.LCD TVs were projected to account 50% of the 200 million TVs to be shipped globally in 2006, according to Displaybank.Toshiba announced 2560 × 1600 pixels on a 6.1-inch (155 mm) LCD panel, suitable for use in a tablet computer,

In 2016, Panasonic developed IPS LCDs with a contrast ratio of 1,000,000:1, rivaling OLEDs. This technology was later put into mass production as dual layer, dual panel or LMCL (Light Modulating Cell Layer) LCDs. The technology uses 2 liquid crystal layers instead of one, and may be used along with a mini-LED backlight and quantum dot sheets.

Since LCDs produce no light of their own, they require external light to produce a visible image.backlight. Active-matrix LCDs are almost always backlit.Transflective LCDs combine the features of a backlit transmissive display and a reflective display.

CCFL: The LCD panel is lit either by two cold cathode fluorescent lamps placed at opposite edges of the display or an array of parallel CCFLs behind larger displays. A diffuser (made of PMMA acrylic plastic, also known as a wave or light guide/guiding plateinverter to convert whatever DC voltage the device uses (usually 5 or 12 V) to ≈1000 V needed to light a CCFL.

EL-WLED: The LCD panel is lit by a row of white LEDs placed at one or more edges of the screen. A light diffuser (light guide plate, LGP) is then used to spread the light evenly across the whole display, similarly to edge-lit CCFL LCD backlights. The diffuser is made out of either PMMA plastic or special glass, PMMA is used in most cases because it is rugged, while special glass is used when the thickness of the LCD is of primary concern, because it doesn"t expand as much when heated or exposed to moisture, which allows LCDs to be just 5mm thick. Quantum dots may be placed on top of the diffuser as a quantum dot enhancement film (QDEF, in which case they need a layer to be protected from heat and humidity) or on the color filter of the LCD, replacing the resists that are normally used.

WLED array: The LCD panel is lit by a full array of white LEDs placed behind a diffuser behind the panel. LCDs that use this implementation will usually have the ability to dim or completely turn off the LEDs in the dark areas of the image being displayed, effectively increasing the contrast ratio of the display. The precision with which this can be done will depend on the number of dimming zones of the display. The more dimming zones, the more precise the dimming, with less obvious blooming artifacts which are visible as dark grey patches surrounded by the unlit areas of the LCD. As of 2012, this design gets most of its use from upscale, larger-screen LCD televisions.

RGB-LED array: Similar to the WLED array, except the panel is lit by a full array of RGB LEDs. While displays lit with white LEDs usually have a poorer color gamut than CCFL lit displays, panels lit with RGB LEDs have very wide color gamuts. This implementation is most popular on professional graphics editing LCDs. As of 2012, LCDs in this category usually cost more than $1000. As of 2016 the cost of this category has drastically reduced and such LCD televisions obtained same price levels as the former 28" (71 cm) CRT based categories.

Monochrome LEDs: such as red, green, yellow or blue LEDs are used in the small passive monochrome LCDs typically used in clocks, watches and small appliances.

Mini-LED: Backlighting with Mini-LEDs can support over a thousand of Full-area Local Area Dimming (FLAD) zones. This allows deeper blacks and higher contrast ratio.

Today, most LCD screens are being designed with an LED backlight instead of the traditional CCFL backlight, while that backlight is dynamically controlled with the video information (dynamic backlight control). The combination with the dynamic backlight control, invented by Philips researchers Douglas Stanton, Martinus Stroomer and Adrianus de Vaan, simultaneously increases the dynamic range of the display system (also marketed as HDR, high dynamic range television or FLAD, full-area local area dimming).

The LCD backlight systems are made highly efficient by applying optical films such as prismatic structure (prism sheet) to gain the light into the desired viewer directions and reflective polarizing films that recycle the polarized light that was formerly absorbed by the first polarizer of the LCD (invented by Philips researchers Adrianus de Vaan and Paulus Schaareman),

A pink elastomeric connector mating an LCD panel to circuit board traces, shown next to a centimeter-scale ruler. The conductive and insulating layers in the black stripe are very small.

A standard television receiver screen, a modern LCD panel, has over six million pixels, and they are all individually powered by a wire network embedded in the screen. The fine wires, or pathways, form a grid with vertical wires across the whole screen on one side of the screen and horizontal wires across the whole screen on the other side of the screen. To this grid each pixel has a positive connection on one side and a negative connection on the other side. So the total amount of wires needed for a 1080p display is 3 x 1920 going vertically and 1080 going horizontally for a total of 6840 wires horizontally and vertically. That"s three for red, green and blue and 1920 columns of pixels for each color for a total of 5760 wires going vertically and 1080 rows of wires going horizontally. For a panel that is 28.8 inches (73 centimeters) wide, that means a wire density of 200 wires per inch along the horizontal edge.

The LCD panel is powered by LCD drivers that are carefully matched up with the edge of the LCD panel at the factory level. The drivers may be installed using several methods, the most common of which are COG (Chip-On-Glass) and TAB (Tape-automated bonding) These same principles apply also for smartphone screens that are much smaller than TV screens.anisotropic conductive film or, for lower densities, elastomeric connectors.

Monochrome and later color passive-matrix LCDs were standard in most early laptops (although a few used plasma displaysGame Boyactive-matrix became standard on all laptops. The commercially unsuccessful Macintosh Portable (released in 1989) was one of the first to use an active-matrix display (though still monochrome). Passive-matrix LCDs are still used in the 2010s for applications less demanding than laptop computers and TVs, such as inexpensive calculators. In particular, these are used on portable devices where less information content needs to be displayed, lowest power consumption (no backli