7 1024x600 lcd panel in stock

※Controller IC Replacement NoticeDue to the global shortage of IC, the controller RA8876 used in this module has been difficult to purchase. In order not to affect the delivery, we will use the controller LT7683 as replacement which is fully compatible with the same stable performance. (Oct-28-2021)

ER-TFTM070-6 is 1024x600 dots 7 "color tft lcd module display with RA8876 or LT7683 controller board,superior display quality and easily controlled by MCU such as 8051(C51), PIC, AVR, ARDUINO,ARM and Raspberry PI .It can be used in any embedded systems,industrial device,security and hand-held equipment which requires display in high quality and colorful image.Portrait mode is also available.

It supports 8080 6800 8-bit,16-bit parallel,3-wire,4-wire,I2C serial spi interface.Built-in MicroSD card slot.It"s optional for touch panel controller,4-wire resistive touch panel screen. font chip, flash chip and microsd card. We offer two types connection,one is pin header and the another is ZIF connector with flat cable mounting on board by default and suggested.

Of course, we wouldn"t just leave you with a datasheet and a "good luck!".Here is the link for 7 " TFT capacitive touch shield with libraries,examples,schematic diagram for Arduino Due,Mega 2560 and Uno. For 8051 microcontroller user,we prepared the detailed tutorial such as interfacing, demo code and development kit at the bottom of this page.

ER-TFTV070-6 is 1024x600 dots 7" color tft lcd module display with HDMI,VGA,Video,AV signal driver board and superior display quality,super wide view angle. optional 4-wire resistive touch panel with USB driver board and cable, optional capacitive touch panel with USB controller board and cable, Optional remote control

【Strong System Compatible】Support Windows operating systems,Mas OS and other systems.When works with Raspberry Pi, supports Raspbian/Ubuntu MATE/Lubuntu/Snappy Ubuntu Core/Kali/OSMC/Retropie/WIN10 IOT, driver free; When work as a computer monitor, supports Windows XP/10/8/7 and Mas OS

The HY070CTP-HD 7 inch LCD Module is designed to work with HAOYU Electronics"s ARM development boards and MarsBoard"s single board computers. It has one 7 inch TFT LCD including capacitive touch screen with 1024 by 600 pixels resolution.

LCD display timing is compatible with HY101CTP, capacitive touch driver compatible withHY050CTP-HD,HY070CTP, HY101CTP, but HY101CTP capacitive touch Y axis polarity different with HY070CTP-HD.

7inch HDMI LCD(C) supports various systems like Raspberry Pi, Banana Pi, Banana Pro, and BB Black to provide Lubuntu, Raspbian, and Angstrom images with a high resolution of 1024×600 and a Capacitive Touch Screen. Besides, it upgrades to an IPS screen with a larger visible angle and more clear display effect. Broadly you can apply it to raspberry pi, HDMI display screen, and other mini PC or even computer displays. If you gonna use it on raspberry pi zero and BB Black, you need to buy HDMI connect wire for the use and for raspberry pi zero you also need to buy A USB type A micro cable. Matched with raspberry pi, it supports raspbian, ubuntu to do single touch without touch, and while as A PC display, it supports Windows 10 / 8.1 / 8 / 7 to do the five-point touch without drive. For the Windows 10/8.1/8 OS, the touch screen supports multi-touch up to 10 points. For some Windows 7 OS, the touch screen supports single touch only. When working with Raspberry Pi, you should set the resolution of the LCD by yourself, or else the LCD screen will not work. When working with Beagle bone, this LCD module is used for display only so you can program the latest Angstrom image file to the board directly without any change. The BeagleBone will read the display parameters of the 7-inch HDMI displayer and set the resolution to 800*480 automatically.

Capacitive USB TouchscreenSupports single touch for Raspberry Pi 4 Model B/3 B+ 2B/B+/B/A , Raspbian, Ubuntu, Windows 10 IoT, Jetson Nano, Free drive. Supports five points touch for windows system 10 / 8.1 / 8 / 7, Free drive.

The 1024x600 7" HD TFT LCD Screen Display AV/VGA/HDMI for Raspberry Piis a standard 7-inch full-color display with high resolution and lower power consumption. It can be applied as a Raspberry Pi display and works perfectly with Raspberry Pi 3, 2, and 1 Model B/B+. Just connect it to the RPi with the HDMI cable in the kit. Also, it can be connected to a CCTV camera via the AV1 port, or vehicle rear-view camera (AV2 port) as the monitor.

7.0" TFT 1024x600 Graphic Parallel IPS TFT Display 24bit RGB Resistive, Capacitive or no Touch Screen. This low cost display solution utilizes an industry standard RGB communication interface for simple integration into a wide variety of new and exis

The MOP-TFT1024600-70A-IPS is 1024x600 pixel, 7.0" parallel 24bit RGB interface IPS TFT. This low cost display solution utilizes an industry standard RGB communication interface for simple integration into a wide variety of new and existing applications. The Light Emitting Diode backlight with PWM controlled brightness allows the MOP Thin Film Transistor line to offer a professional display solution for any project.7.0" TFT 1024 x 600 Graphic Parallel IPS TFT Display