lcd touch screen removing wire roll manufacturer

MMOBIEL Molybdenum Cutting Wire Gold 0.08mm 100m/329ft Great for Professional LCD front Glass Seperation & Free Black Premium Handle Dissection Sticks Gold Wire High hardness, high wear resistance, high toughtness, high tensile strength. Free Black Premium Grip Handles with two holders, Easy to Separate LCD & digitizer and refurbish LCD For Professional Cutting and separating LCD & Digitizer, Compatible with Smartphones. 0.08mm Thickness, & 100m/329ft Long Incl MMOBIEL Microfiber Cleaning Cloth Suitable for several Smartphone, Tablet and Laptop Models of the following manufacturers: iPhone, iPad, Samsung, Huawei, Sony, Xiaomi, LG, Nokia, Motorola, Asus, Lenovo, BlackBerry, Figo, Honor, LeEco, Blu, Microsoft, Nexus, HTC, Google, Archos, Emporia, Garmin, Intex, NEC, Palm, Sagem, Acer, OPPO, ONEPlus MEIZU, Alcatel, ZTE, Xolo, Micromax, Gionee, Vivo, HP, verykool, Maxwest, Plum, Vertu, Yota, Wiko PLEASE CHECK if these tools are compatible for your model and planned repair job. High quality product by MMOBIEL: Each parts are tested before shipment, Item in Stock!

LCD Touch Screen Removing Wire Roll can be used to separate the touch screens from mobile phones . Excellent to remove old broken glass from lcd screens.

You need to save the LCD or touch screen of a smartphone or tablet ? Or simply replace one of the two elements instead of replacing a complete screen ? Then you"ll need this cutting thread !

After having heated the screen surface with a air gun or other appropriate machine, just slide the cutting thread between the LCD and the touch screen to separate them as the glue was soften by the heat.

his method is highly efficient and saving where it can be used to remove the adhesive on the LCD / OLED display by using the way of rolling the adhesive on display. After removing amount of adhesive on the display, the rest of adhesive is very easy to be cleaned with liquid glue remover, clean cloth and clean sponge. Therefore plenty of liquid glue remover can be saved in this way.

Sunshine DT-21N High-precision AC/DC Test Smart Touch Digital MultimeterSpecification:Brand: SunshineProduct Name: Touch MultimeterModel: DT-21NProduc..

Sunshine DT-21N High-precision AC/DC Test Smart Touch Digital MultimeterSpecification:Brand: SunshineProduct Name: Touch MultimeterModel: DT-21NProduc..

OK, I have been reading these comments and while there are some that are correct, there are few or more that are way out there. Guys, as a electronics tech, I have fixed many phones such as this in my time. Yes the cheap screens will fix it most of the time, but there are times when this is not the case. There is no easy fix for this.

1) Check if the screen responds to any touch at all. If it does work but you get “ghost touch”, problem is likely going to be fixed without replacing the screen. Usually one of the connectors are dirty or not plugged in correctly. Easier fix is to open the iphone, lift the screen from the rest of the case/motherboard and unplug the lcd and other connectors that run from the screen to the board. You could use 99% alcohol and a tooth brush. Scrub the connectors gently and wait a few seconds for the alcohol to evaporate before plugging the connectors in. Usually this will fix the trouble and you will have a perfectly working phone without replacing any parts. IMPORTANT: Do not use 50% or 75% alcohol or acetone. Low grade alcohol is 50% water (and we know what water does to the phones)and the acetone can short out the motherboard or melt the certain parts that are important.

2) If only lower or upper or left or right side of the screen work, chances are very high that you need to replace the screen. You can try the solution above, but it will rarely work.

3) If you had a cracked screen and replaced it with the new one and now touch is not working, chances are that you either did not assemble it correctly or the screen is bad. If your old screen was responding to the touch and the new one doesnt, simply try to install the old one again and see if it still responds to the touch. If it does then the new screen is defective and you should return it. If it doesnt then try the first solution again to see if this will help.

4) Everything is installed correctly but the phone still doesnt work. This can be a bigger issue with the board. There is a tiny little IC(chip) on the phone that controls the touch. There are also few tiny little resistors and capacitors that are connected to the same part of the system. If one of these are bad then your phone is pretty much done. Yes they can be replaced, however finding the person with the skill and equipment to do this it likely near 0. most of the resistors and capacitors are covered with the ceramic coating that is nearly impossible to remove, but it can be done. The best thing technician could do in this case it to reheat the motherboard. This likely will not fix the problem permanently but you may get few extra days, weeks or months before its done for good.

I know most people wont read this whole thing, but there is some useful information I wrote here and everything I wrote applies to almost any phone on market today. All of the phones are basically the same. They all have the same parts, only difference if what those parts are going to look like and their location o the phone, but they all need to have the CPU’s, memory chips, power management chips, lcd or touch controller chips and so on.