7 segment lcd display pricelist

... and switchable unit plates are available to provide installation flexibility for users. The displays are available in 7-segment, 16-segment types and green, red LED ...

The D1SC series comes with a large and red 7 segments display. It has a 31.9 mm width and 56.9 mm height. This series features a low power consumption of 12 VDC up to 24 VDC voltage level ...

The SWS-W510 is manufactured by Simex, and is a large-size simple digital panel indicator that is designed for displaying any numerical values and characters defined by the user sent from the master device ...

The SWS-W606 digital panel indicator displays numerical values and characters according to user specifications (in SLAVE mode only) received from the master device via RS-485 serial interface. ...

Red Lion"s LD4 4 inch (101 mm) high LED display is easily read from a distance of up to 180 feet. Housed in an extremely rugged aluminum case the product provides NEMA 4X/IP65 protection making this display ...

The Tractel HF 87 series is an array of digital load cell displays and force management monitors that is suitable for DYNASAFE™ sensors. This device has dynamic effects damper as well as 3 adjustable ...

This high performance universal digital panel meter features a bright 56 mm high display for high visibility at long distances. Setup can be done via its keyboard or via a remote PC since it features ...

CAN and Serial Communication instruments from Curtis display vehicle data and fault information. These gauges connect directly to Curtis controllers and I/O modules, easily, seamlessly and conveniently. The communication ...

... frame, non-glare front cover glass and steel back panel. Excellent readability is ensured by super-bright 7-segment LED modules with a wide viewing angle.

... of aesthetic anodized aluminum frame, non-glare front cover glass and steel back panel. Excellent readability is ensured by super-bright 7-segment LED modules with a ...

... of aesthetic anodized aluminum frame, non-glare front cover glass and steel back panel. Excellent readability is ensured by super-bright 7-segment LED modules with a ...

Esitron Display module DM 6 operates with Profibus-DP or Profinet connection. It aids in representation / visual display of arbitrary process data like pressure, temperature, number of revolutions, counter ...

... digit, 7-segment display. The integrated character set allows that numbers can be directly displayed with decimal places and signs as well as special characters and partially letters. ...

The large display DM100 is available with Profibus, Profinet, CANopen, EtherCAT and Modbus RS485 interface. Other interfaces are being prepared. The 100mm high display is available with 4 to 8 digits. ...

XLITX Technology is honored to be your best business partner supplying LED 7-Segment Display & LED Dot Matrix Display in best prices and best quality. Our aim is to be growing with our clients and have a long-term, steadily cooperation.

LED displays are available in red color and in the size of 6", 7", 8", 10", and 12". The product array available with us includes Single Digit Display, Double Digit Display, Three Digit Display, and Four Digit Display.

·Single Digit Display :It is available in sizes of 0.28", 0.3", 0.36", 0.39", 0.56", 0.8", 1" all type, 1.2", 1.5", 1.8", 2.3", 4", and 5". It is offered in different colours including Red, Yellow, Green, Pure Green, Blue, White & Dual Colour (red & green).

I have good control with I2C with this right now. But be warned is a bit sensitive to static and noise. Since I decided to write a clock in VB6 for testing this, constantly updating the display (every 100 ms move decimal point, and every half second flash colon) when I moved with with my hand it apparently got garbled. Since I was using an Ardvark interface, and had the pull up"s on it turned on, maybe I should have had resistors on the end near the board instead. But what happened is somehow it read it as a change I2C address. So I wrote a change to my vb program and found it had changed to address 181, which I found interesting.

Also wish intensity control 0 would be totally off and not have to blank the display if you want it all not be be seen. But this is a personal preference. And most likely I could rewrite the software to do this myself.

The nice thing about this is the excellent documentation. I may use these chips for replacement where I would normally use a MAX1447/MAX1496/MAX1498 as a volt meter display or a MAX7219 display controller in some things I build. Will be working with some A/D and use the source code and have a bit more fun with this chip and software.