lcd panel flickers and then goes black for sale

I tend to think that the problem may be with your graphics card (If you have one) or with the motherboard if you are using integrated graphics. One sign of a failing graphics card is random "crashes", where the screen goes black, and can come back on. They can also cause Blue Screen of Death (BSOD). If your card is older this is very likely. A thermal issue with the card can cause this. You mention high CPU utilization, which would make me suspect high GPU utilization as well on a discrete card, and even more of an issue if it is integrated graphics in use.

It is possible that the monitor itself is failing. It could be failing backlights on your monitor; a quick check is to shine a bright flashlight at the monitor when it goes black If there is still a dim image where the light hits the screen, you know the backlights or their power supply are probably bad. It pretty much eliminates your system as the problem.

A quick test to see if it is your system or monitor would be to borrow another known good monitor, or another known good one of of your own if you have one, and connect it to the computer in place of this one. If the problem reoccurs, then you can be pretty safe in figuring it is the computer (or cable), rather than the monitor. As jayeff said, monitors are dumb devices and they are very unlikely to be able to cause BSOD.

Screen flickering in Windows 11 is usually caused by a display driver issue or incompatible app. To determine whether a display driver or app is causing the problem, check to see if Task Manager flickers. Then, based on that information, you"ll need to update, rollback, or uninstall your display driver or update or uninstall the app.

If Task Manager flickers along with everything else on the screen, a display driver is probably causing the problem. In this scenario, see the Fix your display driver section.

After you uninstall the first app, restart your device and check if the screen flickering or scrambled issue is resolved or not. If it"s not, uninstall each app one by one until the issue is resolved.

If necessary first remove the old driver using DDU https://www.wagnardsoft.com/content/ddu-guide-t... (not necessary with Microsoft Basic driver which is a placeholder if nothing else is available) and/or installing in Safe Mode with Networking (so you have internet), or Safe Mode, accessed by one of these methods: https://www.digitalcitizen.life/4-ways-boot-saf...

While there check also for newer chipset, BIOS/UEFI firmware (very important), network, sound, USB3 and other drivers, comparing to the ones presently installed in Device Manager reached by right clicking the Start Menu.

Standard Disclaimer: There are links to non-Microsoft websites. The pages appear to be providing accurate, safe information. Watch out for ads on the sites that may advertise products frequently classified as a PUP (Potentially Unwanted Products). Thoroughly research any product advertised on the sites before you decide to download and install it.

Responsible for performing installations and repairs (motors, starters, fuses, electrical power to machine etc.) for industrial equipment and machines in order to support the achievement of Nelson-Miller’s business goals and objectives:

• Perform highly diversified duties to install and maintain electrical apparatus on production machines and any other facility equipment (Screen Print, Punch Press, Steel Rule Die, Automated Machines, Turret, Laser Cutting Machines, etc.).

• Provide electrical emergency/unscheduled diagnostics, repairs of production equipment during production and performs scheduled electrical maintenance repairs of production equipment during machine service.

Anyway, it was a nightmare yesterday, lot"s of black flickers. After that, I shut off the monitor with the power button, powered it on again and after that zero flickers. Today, I went to test the monitor at a friend"s place. See if my videocard would be faulty or something, it"s a new one after all. Well, the monitor was unusable at his place, see the video. My friend is playing Witcher 3, or trying...

We tested a few things and we came to the following conclusion: the black flickers are random, but the colour green ticks the screen off. You know, a bull reacts to the colour red, the monitor reacts to the colour green. A full green background will make the screen go mad and flicker all the time, while the colour red doesn"t make the screen flicker.

So, both at my place and at my friends place the problems occur and they are gradually getting worse. Any solution at all? Is the monitor kaput (broken), as we say it? If needed I can upload the video of the screen reacting to the colour green aswell, but the above video should tell demonstrate my problem well enough.

Some years ago, I gave my old 15" MBP to my kids (2010 model) after changing the battery and installing an SSD. It"s worked great for their use. Yesterday, when they woke the computer from sleep, they noticed a flickering screen. You can still choose the user and enter the password. Once logged in, however, the screen goes black. I"ve looked online and have tried:

I can"t connect it to a monitor at the moment as I"m working from home and can"t connect it to my TV as I don"t have a VGA cable (ordered one on Amazon but only arriving on Monday). Do you all think the screen is shot? I don"t understand though why it flickers when I boot up but then goes to black. I really, I just want to go in and retrieve some of their school work but if this problem can be fixed all the better.

If it works fine on the BIOS (Accessed while tapping F10 during a restart) it"s a software issue & I suggest attaching an alternate monitor to your device and creating a new user account to check if that works better, for starters)

Ever had your TV showing nothing but a black screen even if the audio was working? Unfortunately, that’s a common issue with low/middle-end LCD/LED TVs these days… Even more frustrating, this issue often comes from a rather tiny and cheap component that can be easily replaced. Most common issues are:

The first step into repair is to find the root cause of the issue. As backlight failure is a very common issue, this is the first thing to test. To do so, the easiest way is to power on your screen, put a flashlight very close to it and check if you can see the image through. The image would be very dark, like turning the brightness of the screen very very low.

That implies disassembling the TV to access the backlight which is between the LCD screen in the front and the boards in the rear. In my case, with a Samsung F5000, I had to process as follows:

First we have to remove the back housing to reveal the boards (from left to right: main board, T-CON, power supply) and disconnect the LCD panel from the T-CON board.

Note: Older TVs have neon tubes for backlight, which is thicker and less exposed to this kind of failure. LED backlight is the most common thing these days, but do not mistake an LED TV with an OLED TV. The first one is a classic LCD panel with a LED backlight, whereas the second is an OLED panel that doesn’t need any backlight as it is integrated in each pixels (making the spare parts much more expensive by the way).

As we can see, the backlight system is made of 5 LED strips. First thing to do is look for burnt LEDs. Most LED backlight systems have strips set in series, meaning that if one of the them fails, all the system goes dark…

So, I took 3 9v batteries that were laying in a drawer, put them in series to make a virtual 27v battery (3 x 9v). It’s less then the optimal 32.4v required but not that much lower, it might be able to light the strip a bit so we can identify which is not working. Here is a look at the set-up:

After repeating this operation on all strips, I found only 1 defective LED, the same we thought looked burnt when we first had a look at the backlight (3rd strip from the top, 6th LED from the left). For a better understanding at what a burnt LED looks like here are 2 pictures of a burnt one and an OK one. Mind the roasted color compared to the regular one.

Once we have by-passed the LED, we can power the TV on. Careful! High voltage (200-300v) runs through the TV when plug, so be very careful how you handle it so you don’t electrify yourself!

Now we just need to unplug the TV, replace the LED with a new one and put everything back together. Just to be sure, we should power the TV back on and check that everything is fine.

There might be a lot of other root causes for similar symptoms, a black screen often looks like something very serious and therefore expensive to repair, but this case is the perfect example that taking some time to look for the root cause can sometime lead to a good surprise: here a 1$ fix!

The monitor is the most visible and often underappreciated part of any computer system. It’s where your movies play, your spreadsheets get displayed, and where your gaming adventures come to life. Over the last twenty years, LCD and LED monitors’ slow but sure development and improvement have put top-quality displays within reach of even the most limited budgets. The older CRT monitors are all but extinct from the marketplace.

Even though the display on your computer screen looks like a static picture, it’s not. Instead, the image gets redrawn constantly and erased rapidly so your eyes can’t perceive it. If you’ve ever tried to take a picture of an LED monitor, you may have seen some degree of flicker in the form of lines. This scenario is especially prevalent in 60Hz monitors. Regardless, a modern screen can refresh up to 100 times per second or even more with new technology. This action refers to the refresh rate, which gets measured in Hertz. The lower the refresh rate, the more flicker you may experience.

When you look at monitor specifications, you will see a number such as 60Hz, 100Hz, or something else. The number indicates how many refreshes occur per second. On a 60Hz monitor, the screen refresh runs 60 times per second. A 100Hz monitor will refresh 100 times per second. The faster the refresh rate, the quicker the display reacts to changes and the smoother the experience. This outcome is why 100Hz TVs became so popular and why 100Hz computer monitors are ideal for gaming, where the display changes constantly.

Some people are keener to refresh rates than others. A gamer considers a higher refresh rate better for their gaming experience, mainly because a lot of movement and fast action occurs. Some people can run monitors as slow as 60Hz and still feel satisfied, such as businesses that only use the monitor for customer service or office spreadsheets. Other people, like video editors, prefer high refresh rates to produce better clarity in their editing processes.

Many monitors use PWM (pulse width modulation) backlighting techniques, which lead to rapid flickering, even if the eye cannot see it. PWM turns the lighting on and off rapidly and got designed for adjusting LED brightness levels. PWM’s method for dimming backlighting is to change the speed of the on/off action, which creates pulses that make the LEDs appear dimmer. As the brightness gets reduced, the flicker is generally more noticeable. Many monitors on the market use PWM to save money, but there are some bargains on non-PWM models. You just have to do your homework. Flickering generally leads to eye strain, headaches, and more. Overall, flicker-free backlighting helps prevent health issues and improves visual performance.

Both sides of a monitor DVI cable have screws to hold them securely, but not everybody uses them. Ensure both ends of the connectors are secure and tightly held in place. If securing the connection doesn’t fix the flicker, the cable itself may be defective. Grab a spare one and swap them out to see if that resolves the problem.

Check that both ends of the power cable are also secure. A loose power cable can sometimes cause a screen to flicker, and usually, a buzzing sound accompanies it.

If you have recently updated your graphics driver, check the display settings to ensure nothing has changed.Right-click a blank space on the desktop and select your graphics card—NVIDIA Control Panel in this example. The menu option will vary depending on the manufacturer of your video card.

Within the graphics control panel, click on Change resolution. Select the flickering monitor in the options and make sure the refresh rate is at least 60Hz. If you have a 100Hz monitor, set it to that. Save any changes and retest.

Issues with the graphics card can sometimes cause a monitor to flicker. These situations are unusual, but it is a possibility. The problem isn’t your graphics card if you have multiple monitors and only one screen acts up. If all monitors, or your only monitor, flickers, it is worth checking out the hardware and connections.

Ensure that your graphics card does not have accumulated dirt and dust on the surface. Ensure the cooling fan is working and that all case fans are running when they should. Use Speedfan or a similar program to monitor the temperature of your graphics card, as overheating is a prime cause of most issues. If all looks okay, it might not be your graphics card causing the flickering.

The final potential cause of your computer monitor flickering is the monitor itself. You can try testing it by changing the port you are using. If you use a DVI connection, try using the VGA or DisplayPort output. If nothing changes, you may need to borrow another monitor to test or test your monitor on another computer that you know works fine. If the monitor flickers on another computer or with a different hardware connection, then sad to say, your monitor has probably reached the end of its life.

I thought maybe it was the 4K tv glitching, or backlight turning off, then this evening I put a hand held bug zapper on my desk near the TV to take out some small annoying pests. One made it in the zapper and ZAP! the screen blacked out.

I then opened Plex (An application) on the TV, as it doesn"t use a HDMI signal. Arced the zapper a couple more times, and nothing! No response from the TV.

So, in conclusion, the issue is poor signal quality from the video card to the TV/Monitor in question which can be resolved with a properly designed cable that is designed for 4K@60Hz, shielded and preferably with a heavier gauge wire (such as 26 or 24 gauge for more available bandwidth) and/or a signal booster (For those running 15< foot) and/or switching to a DP to HDMI adapter which may have a better digital signal than the built in HDMI ports on the video card.

As of yet I have a better HDMI cable on order and ferrite chokes, so I have not resolved my issue as of this moment, but that would be my conclusion from my bug zapper causing interference and from what I"ve seen on this thread!

Alternatively, on Windows 10 you can right-click your taskbar and select Task Manager. You don"t actually need to use Task Manager, but you do need it open.

Now, watch your screen to see if Task Manager flickers. If it does, along with everything else on the screen, the problem is likely caused by your hardware or a faulty display driver. On the other hand, if everything except Task Manager flickers, the issue is likely due to an application.

If you have a flashing screen, the first thing to rule out is the hardware. Check all the cable connections from the monitor to the computer—take them out and plug them back in to ensure the cables are secure.

If you have a spare monitor cable, try using it instead. Or buy a replacement online, since it"s an inexpensive purchase. Cables can degrade over time, or maybe a pet has had a sneaky chew. Either way, switch the cable and see if it stops screen flickering.

A monitor"s refresh rate is the speed at which the screen updates the image per second, measured in hertz (Hz). Basic monitors can usually only handle a 60Hz refresh rate, while more advanced ones—typically aimed at gamers—can go up to 360Hz.

Use the Refresh rate dropdown and incrementally select lower rates until the screen flashing stops. If the flashing continues, revert to your monitor"s recommended refresh rate.

Follow the steps above to uninstall the driver, then head to the old driver page for either AMD, NVIDIA, or Intel. This might be a bit of trial and error, but try selecting one released when your screen wasn"t flickering.

If the problem isn"t with your display driver, it doesn"t mean your graphics card isn"t to blame. If your graphics card isn"t seated correctly in your motherboard, it can cause your monitor display to flicker on and off.

You can easily check this if your motherboard has inbuilt graphics. Remove the monitor cable from your graphics card and plug it into the motherboard"s display slot instead. If the flashing stops, you know the graphics card is the problem.

Power off your PC, unplug everything, open the case, and remove your graphics card from the motherboard. Then carefully reseat it, ensuring the card firmly clips into the motherboard. Of course, don"t do this if you"re not comfortable working inside a computer because you might make things worse.

Some apps are incompatible with Windows 10/11 and can cause screen flickering. Think about whether you installed any new software before the screen flashing began or if an app recently updated. In the past, three problematic apps have been Norton Antivirus, iCloud, and IDT Audio.

Across all your applications, make sure you"re running the latest versions. Either update within the app itself or head to the respective official websites and download the most up-to-date release. Alternatively, check the developer"s support page for recently updated apps to see if screen flashing is known as a recent bug.

How do you stop your laptop or computer screen from flickering? Well, many Windows 10 and Windows 11 problems can often be solved by creating a new user profile. Screen flickering is one of them.

If it is time for a new monitor, there are plenty of productive and fun things you can do with the old one. Otherwise, take it off for recycling so it can rest in monitor heaven.

The Apple  24 inch LED Cinema display  and the Apple thunderbolt display have been a  source of frustration for many people.   They flickers, go black, the screens gets garbage on them, the fans turn on and off.   After reading lots of forums and trying various things I have practically completely eliminated all the flickering on my  24 inch LED Cinema display,  here is how.

It’s  had a problem with flickering ever since I first got it back in 2009.  It started off that once a day or so it just went black for five seconds.   At other times  the  screen is completely filled with gobbledygook  until I sleep the display and restart it.   At other times the screen just flickers black for a fraction of a second,  but all the fans  in the screen power down and then power up again.  Apple have released various ‘fixes’  to the problem over the years which have never fully resolved  the problem. Phone calls to Apple support were of no use after the first year because they just claimed it was a hardware problem and ‘out of warranty.’  The flickering got extremely bad recently with ‘El Capitan’   and the flickering also got worse when I connected a Pegasus Thunderbolt hard drive.

Try unplugging and plugging the thunderbolt connector or Apple display port connector,  sometimes the problem can be worse if the connect is not in tightly.

If  you are having really bad problems, make a corner of your screen a hot corner to put your display to sleep.  sometimes my computer is blinking so badly the screen goes crazy and I can’t see anything,  I can’t even see the menus to ‘ restart’  the computer.  But if I move my mouse to the ‘hot corner’  to sleep the display, and then wake the display up again sometimes the problem goes away.

Crazy as it sounds,  wrapping my thunderbolt cable in aluminium foil was the biggest help of anything.  I looped up the excess thunderbolt cable into a circle and put aluminium foil around it to shield it.

Here I have activated the bottom left hot corner so that it puts the display to sleep. When things get really bad I can put the display to sleep with my mouse without having to see what’s happening on the screen. Then I can wake it up again with my spacebar and more often than not the problem has fixed itself temporarily.

When TechRepublic first published steps to keep your monitor free from flickers it was 2001, and the computer world was vastly different. Cathode ray tube (CRT) monitors were the norm, and as anyone who has supported a CRT will tell you, they’re far more sensitive than modern LED screens.

That doesn’t mean flickering can’t still happen to a flat screen monitor: Many of the causes of screen flickers are the same in 2018. Some issues, like electromagnetic interference, are things of the past, but these five tips for fixing screen flickers are largely the same as they were almost 20 years ago.

Check the cable at both the computer and monitor ends. If tightening it down or reconnecting it doesn’t fix the problem try replacing the cable with a new one. If that doesn’t fix the issue it’s time to investigate something else.

Monitor refresh rate is the number of times the screen image is refreshed in a second, as measured in Hertz. If the refresh rate isn’t optimal, or is too low, flickering, lag, and other issues can occur.

You can check the refresh rate on a Windows 10 PC by hitting the Windows key, typing “refresh rate” into the search field, and then clicking on View Advanced Display Info. From there click on Display Adapter Properties For Display 1 (or whichever number display is causing the issue).

If you’re unsure what it should be set to, consult your monitor manufacturer’s website and you should find info on the optimal refresh rate for your model.

A video card that isn’t properly seated on the motherboard can cause a lot of problems, including a screen flicker. Turn the computer off and open the case. Find the video card and check to see if it’s properly connected.

Power down the computer, remove the video card, and connect the monitor cable to the onboard card or a second video card you’ve replaced the old one with. If the problem persists then the issue isn’t the card–it’s something else.

If everything looks okay it could still be a bad monitor–unplug it and replace it with another one. If the new monitor is working properly you’ve found your culprit.

In the original 2001 article, TechRepublic’s Bill Detwiler said something every IT professional can likely attest to having seen before: It may not be a problem and the user might just want a new monitor.

“It is possible that the complaining end user simply wants a newer or larger monitor and thinks complaining about his or her existing screen will accomplish this,” Detwiler said, adding that there’s a way you can make the user happy and not blow budget money on a new monitor at the same time.

“I recommend giving the offending user a different monitor that you’ve been using as a spare. Clean it up and tell the user it’s a newer model than the one they have. If you’re lucky you can even find one that’s a bit bigger than the one they had. Everyone’s happy, and it doesn’t cost a dime.”

Stay up to date on the latest in technology with Daily Tech Insider. We bring you news on industry-leading companies, products, and people, as well as highlighted articles, downloads, and top resources. You’ll receive primers on hot tech topics that will help you stay ahead of the game.

Change the refresh rate to match the capabilities of your monitor. The refresh rate is a measurement of how many times the screen redraws each second. Although this setting is related to older, desktop monitors, it can affect the quality of the Liquid Crystal Displays found in laptops. Right-click the desktop and choose "Screen Resolution," then click "Advanced Settings" and "Monitor." If enabled, place a check beside "Hide Modes That This Monitor Cannot Display" and choose a higher refresh rate from the list.

Update your graphics card drivers. This is the most likely cause if you"ve always had a problem with flicker. Look for "Hardware and Sound" in the Control Panel and click "Device Manager." Under "Display Adapters," you"ll see the exact brand and model of your video card. Go to the manufacturer"s driver Web page and search for this model to download the appropriate drivers. Alternatively, you can revert to an older driver if the flicker began immediately after an update. In this case, return to the Device Manager, right-click your adapter and then "Driver." Click "Roll Back Driver" and "Yes" to confirm.

Lower and raise the laptop screen repeatedly to determine if the flicker is related to movement. Hardware failure is the likely cause when flicker occurs only when the laptop moves. Most likely, the screen cable is loose or damaged, but the inverter and backlight can also cause this problem. The laptop needs to be opened in order to confirm the problem, but do not attempt this unless you are familiar with PC repair and do not mind voiding the warranty. For the best results, take the laptop to a licensed technician or send it back to the manufacturer.

Most laptop screens have LCD or LED displays that although may function correctly most of the time can have issues that can cause flickering. There are a lot of different reasons why the screen on your laptop may flicker. Perhaps it is hardware issues such as the connections on the screen but it can also be software issues. Whatever the cause, this problem is fairly common which means that it is easily fixed.

In this article, we take a look at some of the reasons why your laptop"s screen flickers and also provide you with some of the most effective solutions to this problem.

Some third-party apps have been known to cause a computer screen to flicker on Windows 10. These include Norton AV, iCloud, and IDT Audio. If you have one of these apps or other third-party apps that you think maybe incompatible with the system, it may be a good idea to update them.

Updating your display drivers may also be able to help you fix this flickering issue once and for all. But to safely do this, you need to boot the computer in Safe Mode, uninstall the current display adapter, and then check for driver updates. Here"s a step by step guide to do that;

You can also change the refresh rate of your monitor. The refresh rate refers to how many times the screen redraws each second. This setting may be related to older desktop monitors, but it may also affect the quality of LCDs in Laptops as well. To modify the screen"s refresh rate, follow these simple steps;

Data loss is another problem that many laptop users face. Like this flickering issue, data loss can also be caused by several issues including accidental deletion, malware and viruses, and even hardware and software issues. Therefore when you lose data on your laptop, you need a solution that will make the process of data recovery very easy, while ensuring a very high recovery rate. This tool is

It will recover data lost from your computer"s hard drive as well as all other types of storage devices including external storage devices, USB drives, and even SD cards

The program will immediately begin scanning the selected location for any missing file. Keep in mind that this scan can take a while depending on the amount of data on the drive and the individual size of the files.

This laptop screen flickering issue is a problem that can occur at any time. The solutions above should be able to help you fix the issue once and for all. Let us know in the comments section below if the solutions worked for you. As always questions and comments on this and any other issue are also welcome.

If your laptop flickers when moved, you need to update your graphic card drivers. Go to the "Hardware and Sound" section of your Control Panel. Select the "Display Adapters" and choose the tab "Device Manager". This is where you will see the model and brand of your video card so that you can update it on the manufacturer"s website.

You can stop your laptop screen from flickering by disabling Windows Desktop Manager. Create alignment between the refresh rates of your external monitor and your laptop. Go to the manufacturer"s website and get the latest drivers to download.

Some M1 MacBook Pro, M1 MacBook Air, and M1 Mac Mini users have discovered display issues when using an external display connected to their M1 Mac. Typically the M1 Mac external display issues are either a flickering display, a display that won’t wake from sleep and where the screen stays black, or a white noise display visible after the Mac has woken from sleep, or after the display has slept or turned off and is attempted to be used by the Mac again.

If you’re experiencing external display issues with an M1 Mac, read on to learn about possible fixes and workarounds to the display flickering, white noise showing, black screens that won’t wake, or other similar issues.

This issue seems to exist regardless of which dongles, display connectors and adapters, or display cables are used, and whether or not it’s a compatibility issue between the M1 Mac series and certain external displays, a bug with macOS that has yet to be resolved, or some other problem, is not yet clear. Some users have reported success with using a USB-C to HDMI or USB-C to DisplayPort cable with the M1 Mac, instead of a dongle or adapter, but that does not resolve the problem for everyone.

For my own M1 MacBook Pro, simply disconnecting and reconnecting the USB-C dongle adapter from the Mac does not resolve the display flickering or white noise issue. Instead, I’ve found disconnecting and reconnecting the HDMI cable from the USB-C dongle adapter itself works.

Rebooting the Mac also appears to often fix the display flickering problem, but this is annoying and should not be necessary for most Mac users. Instead, try the approaches discussed above with disconnecting and reconnecting the cable.

Setting up a Hot Corner and choosing “Prevent Sleep” as the Hot Corner configuration, then remembering to throw the mouse cursor into that corner, will prevent sleep when used.

Though this issue persists with modern macOS versions (including macOS Big Sur 11.4, macOS Big Sur 11.5, and macOS Monterey for some users), installing the latest available macOS system software updates may resolve the problem eventually, particularly if it’s a bug that Apple has fixed.

A previous issue with the M1 Mac Mini having issues with displays not waking from sleep was apparently fixed with macOS Big Sur 11.3, but some users still experience the problem with later macOS versions, or variations of the issue (flickering screens, white noise, monitor stuck on black, etc), and with other M1 Mac models.

For example, some users may have problems with a cheap USB-C to HDMI dongle, but find that another higher quality USB-C to HDMI adapter may work fine, or if HDMI is not working then a USB-C to DisplayPort cable may work.

I was able to completely fix my flickering external display and noisy external display on a M1 MacBook Pro by switching from HDMI with a dongle to a Warky USB-C to DisplayPort cable that’s compatible with my external display. Anecdotal, but it’s something to consider, especially if the temporary fixes like unplugging and plugging the cable back in are getting to be annoying.

However, if you know the display cables are working with another device at 60hz, you can typically manually change the refresh rate on a Mac display with these instructions. You can also check refresh rate in use on the display as discussed here. A 30hz refresh rate is usually fairly obvious and not subtle, as the mouse cursor is typically choppy, as are dragging windows around on screen, and playing games or watching movies is choppy too.

Do you have display issues with external screens and your M1 Mac? What are the problems you are having, and how did you resolve them? Did you find another solution not mentioned here? Share with us your experiences, tips, and suggestions in the comments.