tft lcd screen vs super amoled pricelist

AMOLED and TFT are two types of display technology used in smartphones. AMOLED (active-matrix organic light-emitting diode) displays are made up of tiny organic light-emitting diodes, while TFT (Thin-Film Transistor) displays use inorganic thin-film transistors.

AMOLEDs are made from organic materials that emit light when an electric current is passed through them, while TFTs use a matrix of tiny transistors to control the flow of electricity to the display.

Refresh Rate: Another key difference between AMOLED and TFT displays is the refresh rate. The refresh rate is how often the image on the screen is updated. AMOLED screens have a higher refresh rate than TFT screens, which means that they can display images more quickly and smoothly.

Response Time: The response time is how long it takes for the pixels to change from one colour to another. AMOLED screens have a shorter response time than TFT screens..

Colour Accuracy/Display Quality: AMOLED screens are more accurate when it comes to displaying colours. This is because each pixel on an AMOLED screen emits its own light, which means that the colours are more pure and true to life. TFT screens, on the other hand, use a backlight to illuminate the pixels, which can cause the colours to appear washed out or less vibrant.

Viewing Angle: The viewing angle is the angle at which you can see the screen. AMOLED screens have a wider viewing angle than TFT screens, which means that you can see the screen from more angles without the colours looking distorted.

Power Consumption: One of the main advantages of AMOLED displays is that they consume less power than TFT displays. This is because the pixels on an AMOLED screen only light up when they need to, while the pixels on a TFT screen are always illuminated by the backlight.

Production Cost: AMOLED screens are more expensive to produce than TFT screens. This is because the manufacturing process for AMOLED screens is more complex, and the materials used are more expensive.

Availability: TFT screens are more widely available than AMOLED screens and have been around for longer. They are typically used in a variety of devices, ranging from phones to TVs.

Usage: AMOLED screens are typically used in devices where power consumption is a concern, such as phones and wearable devices. TFT screens are more commonly used in devices where image quality is a higher priority, such as TVs and monitors.

AMOLED and TFT are two different types of display technology. AMOLED displays are typically brighter and more vibrant, but they are more expensive to produce. TFT displays are cheaper to produce, but they are not as bright or power efficient as AMOLED displays.

The display technology that is best for you will depend on your needs and preferences. If you need a screen that is bright and vibrant, then an AMOLED display is a good choice. If you need a screen that is cheaper to produce, then a TFT display is a good choice. However, if you’re worried about image retention, then TFT may be a better option.

Nauticomp Inc.provides world-class fully customizable touchscreen displays for commercial and industrial settings. With features like sunlight readability, brightness adjustability, infrared lighting, full backlighting, all-weather capabilities, etc., our displays are second to none. Contact us today to learn more.

Thanks for the display technology development, we have a lot of display choices for our smartphones, media players, TVs, laptops, tablets, digital cameras, and other such gadgets. The most display technologies we hear are LCD, TFT, OLED, LED, QLED, QNED, MicroLED, Mini LED etc. The following, we will focus on two of the most popular display technologies in the market: TFT Displays and Super AMOLED Displays.

TFT means Thin-Film Transistor. TFT is the variant of Liquid Crystal Displays (LCDs). There are several types of TFT displays: TN (Twisted Nematic) based TFT display, IPS (In-Plane Switching) displays. As the former can’t compete with Super AMOLED in display quality, we will mainly focus on using IPS TFT displays.

OLED means Organic Light-Emitting Diode. There are also several types of OLED, PMOLED (Passive Matrix Organic Light-Emitting Diode) and AMOLED (Active Matrix Organic Light-Emitting Diode). It is the same reason that PMOLED can’t compete with IPS TFT displays. We pick the best in OLED displays: Super AMOLED to compete with the LCD best: IPS TFT Display.

Apple has used the Super AMOLED screen developed by Samsung since the iPhone X. If the original OLED is replaced after the warranty period of the mobile phone screen, the iPhone X and iPhone XS will cost $549. The high cost of replacing screens is not something that every consumer is willing to accept. Soft OLED and hard OLED replacement screens have gradually become hot selling products in mobile phone repair shops. Recently, the appearance of in cell LCD adapted to the iPhone X has broken this calm. It uses lower-cost LCD instead of OLED screens and enters the iPhone X repair industry with an absolute price advantage. What are the advantages and disadvantages of in cell LCD and OLED screen?

Take iFixit, a more authoritative website in the smartphone repair industry, and launched an in-cell LCD screen suitable for iPhone X / iPhone XS / iPhone XS Max. The prices are $75, $85, and $165.Its price is only half of OLED. The

In-cell LCD screen is darker than OLED, and the screen display color gamut and resolution are lower. When the mobile phone is in standby, the OLED screen can display pure black, while the LCD cannot.

The biggest advantage of the OLED screen is that the power consumption is small, the power consumption of the TFT LCD screen is larger than that of the OLED, and the standby time is shortened after the LCD screen is replaced.

In low-light environments, users who use OLED mobile phone screens are prone to eye pain. Because LCD can directly reduce the brightness of the screen, and OLED uses the method of adjusting the brightness and non-light duty cycle to deceive the brain to adjust the brightness. This means that in the dark light environment when the human pupil is naturally enlarged to allow more light to enter, the OLED actually enters the pupil at the highest brightness.

According to the iPhone customer experience feedback information, the LCD screen is more in line with the current user habits on the market. Apple is developing LCD screens for both the iPhone Xr and iPhone 11. Compared with OLED, iPhone in cell TFT LCD has a larger display effect than the original screen, and the price is much cheaper than OLED.

Two of the main contenders for display technologies that are widely available are AMOLED and LCD. Here in this article, we will be comprising AMOLED vs LCD and find out which one is better for you.

Starting with the AMOLED first, it is a part of the OLED display technology but with some more advanced features. To completely know about it must understand its all three components. The first one is LED, “Light Emitting Diode”. Then we have “O” which stands for organic and makes the OLED.

It actually means that organic material is placed with two conductors in each LED, which helps to produce the light. And the “AM” in AMOLED means Active Matrix, it has the capability to increase the quality of a pixel.

The AMOLED display is similar to the OLED in various factors like high brightness and sharpness, better battery life, colour reproduction, etc. AMOLED display also has a thin film transistor, “TFT” that is attached to each LED with a capacitor.

TFT helps to operate all the pixels in an AMOLED display. This display might have a lot of positives but there are a few negatives too let’s point both of them out.

Low outdoor visibility, usually the AMOLED Displays are quote not bright in direct sunlight and outdoor readability could be a problem for some devices but average screen brightness.

The LCD stands for “Liquid Crystal Display”, and this display produces colours a lot differently than AMOLED. LCD display uses a dedicated backlight for the light source rather than using individual LED components.

The LCD displays function pretty simply, a series of thin films, transparent mirrors, and some white LED lights that distributes lights across the back of the display.

As we have mentioned, an LCD display always requires a backlight and also a colour filter. The backlight must have to pass through a thin film transistor matrix and a polarizer. So, when you see it, the whole screen will be lit and only a fraction of light gets through. This is the key difference comparing AMOLED vs LCD and this is what differentiates these two display technologies.

The LCD displays are cheaper compared to the AMOLED as there is only one source of light which makes it easier to produce. Most budget smartphones also use LCD displays.

LCD displays have bright whites, the backlight emits lots of light through pixels which makes it easy to read in outdoors. It also shows the “Accurate True to Life” colours, which means it has the colours that reflect the objects of the real world more accurately than others.

LCDs also offer the best viewing angle. Although it may depend on the smartphone you have. But most high-quality LCD displays support great viewing angles without any colour distortion or colour shifting.

The LCD displays can never show the deep blacks like AMOLED. Due to the single backlight, it always has to illuminate the screen making it impossible to show the deep blacks.

The LCDs are also thicker than other displays because of the backlight as it needs more volume. So, LCD smartphones are mostly thicker than AMOLED ones.

Let’s start with the pricing. Most AMOLED display smartphones always cost more than an LCD smartphone. Although the trend is changing a bit. But still, if you want to get a good quality AMOLED display you have to go for the flagship devices.

The colors are also very sharp and vibrant with the AMOLED displays. And they look much better than any LCD display. The brightness is something where LCDs stood ahead of the AMOLED display. So using an LCD display outdoors gives much better results.

The last thing is battery consumption, and there is no one near the AMOLED displays in terms of battery. As of now, all smartphones feature a Dark Mode and most of the apps and UI are dark black with a black background. This dark UI on smartphones doesn’t require any other light, it gives the AMOLED displays a boost in battery performance.

Looking at all these factors and comparing AMOLED vs LCD displays, the AMOLED displays are certainly better than the LCDs. Also, the big display OEMs, like Samsung and LG are focusing more the OLED technologies for their future projects. So, it makes sense to look out for AMOLED displays. That being said, if we see further enhancements in the LCD technology in terms of battery efficiency and more, there is no point to cancel them at this moment.

AMOLED displays are popular for the pure blacks and energy efficient "glance" displays they enable. Thus they are seen as a premium option for smartphone and laptop users, and AMOLED panels are only seen in really high-end TVs. However, thanks to competition and demand spurring greater production, prices are starting to become more competitive with TFT LCD panels, reports IT industry journal DigiTimes.

According to the source report "The production cost for a 5.5-inch HD AMOLED panel has drifted to US$12.10 recently, compared to US$12.20 for a 5.5-inch HP LTPS LCD panel". This is a big change to the previous state of affairs where AMOLED panels had "much higher,"prices due to the increased production costs. Thanks to the levelling off of prices and demand it"s expected that AMOLED panels will be equipped on up to 50 per cent of smartphones by 2020.

In other recent AMOLED smartphone news, the Nikkei Asian Review asserts that Apple will "use OLED screens in all new iPhones launching in 2018". Industry sources say Apple is considering launching three smartphones in 2018 and all will come equipped with this type of display.

Later this year Apple will launch its first OLED iPhone - but only the premium version will get this type of display, in a design that eschews its iconic Home button. Two other iPhone models released this year will use TFT LCDs.

Back to the AMOLED panel pricing news, and there is hope that larger displays, not just those aimed at smartphones and tablets, will come down in price. LG Display"s E4-2 fab, its second production line for AMOLED displays for TVs, will enter volume production in H2 2017, says DigiTimes. Thanks to the new production line AMOLED TV display production is set to more than double to 1.5 million units, say sources. Furthermore, several Chinese panel makers have been investing in AMOLED production facilities with output set to increase fivefold (comparing 2016 output to that estimated to come on line in 2018).

By now you know that (one of) AMOLED"s Achilles" heel is readability in direct sunlight. But Samsung"s been working hard to fix that with its new Super AMOLED technology. Techblog took the display to task by pitting the Samsung Galaxy S (4-inch, 480 x 800 pixel Super AMOLED) against the HTC Desire (3.7-inch 480 x 800 pixel AMOLED) and Sony Ericsson XPERIA X10 (4-inch, 480 x 854 pixel TFT LCD). It"s clear from the video embedded after the break that the LCD still has the edge in the harsh Greek sun, but the Super AMOLED certainly makes a much stronger showing than its AMOLED sib. In fact, differences in visibility between the LCD and Super AMOLED are often indistinguishable, like the picture above. That"ll be good news for us just as soon as Samsung can start meeting demand... regardless of what Stevie J has to say. Check the video after the break and be sure to click the source for some more side-by-side pics, including a few taken indoors where that Super AMOLED display really shines.

Samsung came up with its unique 18:5:9 AMOLED display for the Galaxy S8. LG picked up its old trusted IPS LCD unit for the G6’s display. These display units have been familiar to the usual Indian smartphone buyer. Honor, on the other hand, has just unveiled the new Honor 8 Pro for the Indian market that ships with an LTPS LCD display. This has led to wonder how exactly is this technology different from the existing ones and what benefits does it give Honor to craft its flagship smartphone with. Well, let’s find out.

The LCD technology brought in the era of thin displays to screens, making the smartphone possible in the current world. LCD displays are power efficient and work on the principle of blocking light. The liquid crystal in the display unit uses some kind of a backlight, generally a LED backlight or a reflector, to make the picture visible to the viewer. There are two kinds of LCD units – passive matrix LCD that requires more power and the superior active matrix LCD unit, known to people as Thin Film Transistor (TFT) that draws less power.

The early LCD technology couldn’t maintain the colour for wide angle viewing, which led to the development of the In-Plane Switching (IPS) LCD panel. IPS panel arranges and switches the orientation of the liquid crystal molecules of standard LCD display between the glass substrates. This helps it to enhance viewing angles and improve colour reproduction as well. IPS LCD technology is responsible for accelerating the growth of the smartphone market and is the go-to display technology for prominent manufacturers.

The standard LCD display uses amorphous Silicon as the liquid for the display unit as it can be assembled into complex high-current driver circuits. This though restricts the display resolution and adds to overall device temperatures. Therefore, development of the technology led to replacing the amorphous Silicon with Polycrystalline Silicon, which boosted the screen resolution and maintains low temperatures. The larger and more uniform grains of polysilicon allow faster electron movement, resulting in higher resolution and higher refresh rates. It also was found to be cheaper to manufacture due to lower cost of certain key substrates. Therefore, the Low-Temperature PolySilicon (LTPS) LCD screen helps provide larger pixel densities, lower power consumption that standard LCD and controlled temperature ranges.

The AMOLED display technology is in a completely different league. It doesn’t bother with any liquid mechanism or complex grid structures. The panel uses an array of tiny LEDs placed on TFT modules. These LEDs have an organic construction that directly emits light and minimises its loss by eradicating certain filters. Since LEDs are physically different units, they can be asked to switch on and off as per the requirement of the display to form a picture. This is known as the Active Matrix system. Hence, an Active Matrix Organic Light Emitting Diode (AMOLED) display can produce deeper blacks by switching off individual LED pixels, resulting in high contrast pictures.

The honest answer is that it depends on the requirement of the user. If you want accurate colours from your display while wanting it to retain its vibrancy for a longer period of time, then any of the two LCD screens are the ideal choice. LTPS LCD display can provide higher picture resolution but deteriorates faster than standard IPS LCD display over time.

An AMOLED display will provide high contrast pictures any time but it too has the tendency to deteriorate faster than LCD panels. Therefore, if you are after greater picture quality, choose LTPS LCD or else settle for AMOLED for a vivid contrast picture experience.

When you buy a smartphone and while reading the specifications of the phone, you often do not pay attention to the type of phone screen. Screen types abbreviations can be a bit confusing and most people don’t usually take them into consideration due to their ignorance. Don’t worry now we will give you everything you need to know about the main types of screens which are LCD, OLED and AMOLED.

Previously, there were only two main types in the smartphone industry, LCD and LED. But with the advancement in technology, many other types such as OLED, AMOLED, sAMOLED, and Retina have appeared. LCD screens are used in most mid-range phones from Xiaomi, Realme and other Chinese manufacturers and OLED in their top-end devices. Samsung uses AMOLED and sAMOLED displays, while Apple uses Retina displays. Let us discuss each of these types one by one.

LCD (abbreviation for Liquid Crystal Display). The oldest type of screen, it relied on backlighting as the only light source to illuminate the pixels. Also, LCD screens are brighter than most other types of screens, which makes them suitable for use in smartphones in bright sunlight. However, these screens suffer from less accurate colors. Smartphones use two main types of LCD screens:

TFTstands for Thin Film Transistor. TFT monitors are an advanced version of LCD monitors. While TFT has a relatively lower production cost and provides better image quality than previous generations of LCD monitors, it has higher power consumption, lower viewing angles and lower color representation.

IPSstands for In-Plane Switching. It is an improved version of TFT. Availability Provides better viewing angles and color representation by utilizing more powerful backlighting. It consumes less power than TFT, but its cost is higher overall.

OLED (Organic Light-Emitting Diode). The presence of this type is the main reason for the emergence of curved displays and foldable smartphones. Unlike LCD screens, which use backlighting, OLED screens do not require this because they contain a layer of organic matter that emits light when exposed to an electric current. OLED displays display more saturated and vibrant colors. Because of the luminance per pixel, OLED displays provide darker levels of black. Because the pixels that don’t get caught are in a sleep state, OLED screens usually use less power and give better battery life. These screens are of two main types:

AMOLEDstands for Active Matrix Organic Light-Emitting Diode. Similar to an OLED screen but has Thin Film Transistors (TFT) on the back panel. This ensures faster and more precise control as it can turn on or off any pixel individually, and it also has a storage capacitor which eliminates screen size limitations and provides the possibility of a larger screen. We will explain AMOLED screens in more detail due to their great popularity.

PMOLEDstands for Passive Matrix Organic Light-Emitting Diode. It is cheaper than other LED screens but its life span is short and it cannot work for long periods of time. It has a simple control system in which each row of the screen can be controlled sequentially. Due to its low efficiency, it is generally used in devices whose screen size is less than 3 inches.

AMOLED (Active Matrix Organic Light-Emitting Diode). Improved OLED screens. The most important component of these displays is the TFT element that controls the flow in each pixel. With two TFTs per pixel, one to start and one to stop charging the storage capacitors this allows each LED to operate individually and generate light for itself. Due to its great flexibility it can be used in foldable phones.

You may have seen the term sAMOLED or Super AMOLED. These monitors were invented by Samsung and are available in their high-end models. This type provides a variety of colors with greater clarity. Super AMOLED displays can handle sunlight better than other AMOLED displays, while consuming less power.

Each of the above types of screens has its own advantages and disadvantages. In general, AMOLED is superior to LCD screens. Our primary comparison criteria are higher refresh rates, better color representation, and battery consumption. As for OLED versus AMOLED, we already mentioned that AMOLED is an improved version of OLED as it offers better image quality to battery consumption. Due to their low usability under sunlight, Super AMOLED screens are the best choices.

In the end, it all boils down to your needs and budget. If you’re on a tight budget, an LCD monitor isn’t a bad deal. But if your budget is good, you should definitely opt for the newer AMOLED screen especially for TVs.

These displays are improved versions of LCD screens because they provide better viewing angles, colour reproduction, sunlight visibility, and lifespan. However, these screens exhibit limited ratio and consume too much power.

All displays mentioned here have their advantages and disadvantages. With this in mind, you can choose a display based on your needs, budget, and preference. To know the type of screen on any device you want to buy, Google the phone’s name and check under the display section.

TFT is an abbreviation for Thin Film Transistor, a flat panel display used to improve the operation and utility of LCD screens. In order to portray an appearance to the audience, a liquid crystal display (LCD) utilizes a crystalline-filled fluid to modify rear lighting polarized origin through the use of an electromagnetic force among two relatively thin metal wires such as indium oxide (ITO). However, color TFT displays are associated with this method, which can be employed in both divided and pixelated display systems.

With motion pictures displayed on an LCD, the intrinsic sluggish rate of increase between liquid phases over a significant number of pixel components can be an issue due to capacitance impacts, which can create a blurring of the visuals. Placing a high-velocity LCD control device inside the formation of a thin-film transistor immediately next to the cell component just on a glass screen, the issue of LCD picture speed may be substantially improved, and image blur can be eliminated for all useful purposes entirely.

Organic light-emitting diodes (AMOLEDs) are a type of flat light-emitting advanced technologies that are created by interspersing a succession of organic thin sheets over two conducting conductors. An electrical charge causes a brilliant light to be produced when the current flows. AMOLED displays are light-emitting screens that do not require a backlight, making them thinner and more energy-efficient than liquid crystal displays (LCDs) (which will need a white backlight).

AMOLED displays are not only thin and fuel-intensive, but they also deliver the highest image quality available, so they can be made translucent, elastic, bendable, or even rollable and stretchy in the future, allowing for a variety of applications. AMOLEDs are a revolutionary technology in terms of display devices! It is possible to create an AMOLED by sandwiching a sequence of thin films across phase conductors. Electric charge causes a brilliant light to be emitted when the current flows through the coil.

Half-Life has been expanded. TFT displays have a far longer half-life than its LED equivalents, and they are available in a number of sizes, which might have an effect on the device"s half-life based on the phone"s usage as well as other variables. Touch panels for TFT screens can be either resistant or capacitance in nature.

Backlighting is unnecessary for AMOLEDs. LCDs produce images by selectively blocking parts of the illumination, whereas AMOLEDs produce light. AMOLEDs utilize less energy than LCDs since they don"t need backlighting. This is critical for battery-powered devices such as phones.

While AMOLED light-emitting sheets are lightweight, the substrate can also be elastic rather than stiff. AMOLED films are not limited to glass-like LEDs and LCDs.

AMOLEDs offer 170-degree ranges of vision. LCDs operate by obscuring the light. Hence they have intrinsic viewing obstacles. In addition, AMOLEDs have a substantially wider viewing spectrum.

AMOLEDs outperform LEDs. Since AMOLED organic coatings are less than LED inorganic crystal levels, AMOLED conducting and particle emitters layers can just be multi-layered. Also, LEDs and LCDs need glass backing, which absorbs light. AMOLEDs don"t need it.

AMOLEDs seem to be simpler to implement and larger. AMOLEDs are constructed of polymers and may be produced into big sheets. It takes a lot of extra liquid crystals to build and set down.

While red and green AMOLED sheets have a greater lifespan (46,000 to 230,000 hours), azure compounds have significantly shorter longevity (up to roughly 14,000 hours).

Due to the fact that AMOLED displays inherently emit illumination, they do not need a backlight when used on a monitor screen. Conversely, LCDs require backlights since the liquid crystals themselves are incapable of producing light under their own. Direct light emission from AMOLED displays also allows for the developing of lightweight display devices than others using TFT LCDs.

LCD displays have a higher brightness than AMOLED panels. This is owing to the LCD"s usage of led backlight, which may provide a brilliant illumination of the entire display. Despite the fact that AMOLEDs produce high levels of brilliance from their illumination, they will never be able to match the intensity of LCD lighting.

LCD screens use less power than AMOLED displays, which provides a slight advantage. The amount of energy consumed by AMOLED displays is dependent on the intensity of the screen. Lowered luminance results in lower energy usage, however, it might not be the best solution because the contrast would suffer as a result of the decreased brightness. In some situations, such as when to use an AMOLED device in direct sunlight, it is not an optimal situation.

However, the backlit keys of TFT displays account for the majority of their power usage. TFT screens" efficiency is considerably improved when the backlight is set to a lesser brightness level than the default setting. For example, replacing the light of an LCD TV with just an Led flash will have no effect on the image quality, but will result in lower power usage than replacing the light of an AMOLED TV.

With the exception of phones, numerous other technologies make use of displays to allow customers to engage in direct communication with them. To determine whether or not TFT LCD will be able to withstand the development of AMOLED innovation, we should first review the benefits of LCD technology. The backlighting quality ensures that whites are strong and brightness is superb but will deplete a battery much more quickly than just an AMOLED display. Furthermore, the cost of LCD screens is a considerable consideration. In addition to being less expensive and more easily accessible, they are produced in standard industry sizes, allowing them to be purchased for innovative products with relative ease.

Future undoubtedly belongs to OLED, but for now LCD is more mature, cheaper and can be mass produced – all advantages, if you actually want to get a product to market. No wonder then that even Samsung’s own Galaxy Tab 7” tablet was outfitted with an LCD screen, while the new Samsung Wave IIreplaces the Super AMOLED of the original, for a Super LCD. AMOLED screens in larger sizes are cost-prohibitive, at least until real mass production is realized.

Apart from the major supply issues, the commercial AMOLED screens at first seemed to have some drawbacks such as being too reflective, which diminished their sunlight visibility. Moreover, despite the lab claims for power efficiency, battery life on smartphones with AMOLED screens was nothing to get excited about at first.

Then, in January 2010, Samsung announced the next generation of “Super" AMOLED screens. Super AMOLED is 20% brighter, 80% less reflective, and uses 20% less energy than regular AMOLED screens, thanks to having only two major components – the actual AMOLED emitting layer, and the tough but thin Gorilla Glass, sealed over it. The touchscreen coating Samsung has managed to apply as an only 0.001mm thin layer in-between, bringing the light-emitting layer closer to the glass, to show raw, vivid colors.

On the other hand, the IPS-LCD (in-plane-switching LCD) technology, has largely overcome the usual troubles with LCD screens, namely power consumption and viewing angles, plus it allows for smaller pixels, making possible the incredible resolution of the iPhone 4. The iPad and iPhone displays are mainly produced by LG, and exhibit much more contrast, compared to regular LCDs. It is probably the best the LCD world can offer, without being cost-prohibitive.

Asked about why Apple didn’t go with the emerging OLED screen technology for the iPhone 4, Steve Jobs said that the high-res IPS-LCD in the iPhone 4 is better than OLED. And he was right - at the time when millions of iPhones had to be produced, the only OLED technology that might have met Apple’s requirementsis Super AMOLED. Since it belongs to Samsung, it will not be until 2011 that the Koreans would be able to mass-produce such screens. Apple approached Samsung for their AMOLED screens, in the preparations to launch the iPhone 4, but the capacity just isn"t there. There are rumors that Cupertino is talking again with Samsung regarding the Koreans" new plant capacity for an eventual Super AMOLED display in the upcoming iPhone edition next summer.

Still, the more mature LCD technology managed to come up with an IPS-LCD screen for the iPhone, which hits AMOLED in a few areas where it hurts. A major advantage of Apple’s IPS-LCD is the so-called Retina Display technology, which has miniaturized pixels in order to cram a 640x960 resolution into the 3.5” display. At this resolution, only perfect vision can distinguish the individual pixels from a certain distance. That makes high-contrast situations, such as e-books and web pages look very crisp and legible.

Also, with one of the major advantages of OLED-based displays being their slender profile, Apple still managed to produce the thinnest smartphone on the market, helped by LG"s slim display. Despite LCD’s need for backlighting, the advancements in power management in the IPS-LCD brought along similar battery consumption on comparable chipsets for both phones. This is not easy to be explained, until we look at one table from the dawn of OLED-based screens a few years ago:

The fact of the matter is that LCD screens draw fairly constant power, no matter what images are shown on the screen. AMOLED, in its turn, needs the most powerful current applied to pixels that are showing white. Thus, while OLED displays are up to 90%+ more efficient when the background is black, when showing pure white, OLED screens can be consuming 3 times more power than an LCD display. This is why black menu backgrounds and colorful icons are recommended in user interfaces developed for AMOLED screens.

In a recent battery endurance test, consisting of websites display on several last-gen phones, it wasn’t the Super AMOLED phones that came ahead, but rather the Motorola DROID 2 and Motorola DROID X with their last-gen LCD screens. If the test had been on a looped video, the Super AMOLED phones would have probably given up the ghost last, since websites mainly use white backgrounds.

AMOLED screens also have shorter lifespan of the blue organic diodes, compared to the green and red ones, which might result in a shorter overall lifespan of the device. Using a PenTile matrix (developed by a company, whose IP Samsung bought not long ago), is one way to remedy this shortcoming. It arranges one green subpixel with double-width red or blue ones, thus showing only two colors per pixel, instead of the usual three. Some researchers claim this effectively lowers the interpolated 480x800 resolution of the Samsung Galaxy S, to actual 392x653, making text and web pages appear more pixelated. Recent advancements of the blue diodes" lifespan, however, puts it at over 30 000 hours, which means the screen will be around for many moons after you have moved on to another phone anyway.

Both handsets use Gorilla Glass, but the OLED-based screens are more withstanding to concussion due to less layers in them, and glass elements in general. On the other hand, OLED is easily damaged by water, that is why the Gorilla Glass is sealed over the touch coating of the AMOLED layer. Not that LCD would survive much water, but we are just nitpicking here, for comparison"s sake.

Super AMOLED is Samsung"s own version of AMOLED display which is enhanced for a better output. Most of Samsung"s mid-range and flagship smartphones come with a Super AMOLED display. Even other brands have started using this display off late. There are many benefits of having such a display in a smartphone. With Super AMOLED display, a phone can be thinner, consume less battery, offer higher contrast and better touch sensitivity among other benefits. Samsung has been using this technology in its phones since a long time and it continues enhancing the display for even better output. Below is a list of all the Super AMOLED display phones with their accurate specifications and features.

Apple won"t embrace AMOLED display technology in the iPhone in the near future, instead opting to stick with its current LCD panels until at least 2018, analyst Ming-Chi Kuo of KGI Securities said on Tuesday.

The details from Kuo specifically dismissed recent rumors claiming that Apple could switch to an AMOLED display for its 2016 "iPhone 7" upgrade. That"s unlikely, Kuo said, as Apple"s suppliers continue to invest in advanced LCD technology likely to power iPhones for years to come.

Specifically, Kuo noted that Foxconn has inked a deal with the government of Henan Province, China, to build sixth-generation LTPS TFT-LCD production lines in Zhengzhou. The plant will enter mass production in 2018, and Kuo is "confident" that the huge investment is for earning TFT-LCD orders for future iPhones.

In addition, Japanese supplier Minebea, which provides backlight units for Apple"s iPhone lineup, told investors earlier this month that it does not foresee risk of TFT-LCD share loss to AMOLED in the high-end smartphone market. Minebea officials believe that demand for LCD panels will remain strong in the high-end smartphone market over the next three years.

LCD offers a number of advantages over OLED, including production cost, supply flexibility, product life, and visibility in sunlight. In contrast, OLED panels are known for bright colors and power consumption savings, which is why Apple adopted OLED technology in its wearable Apple Watch.

One key difference, however, is the Apple Watch features a dark user interface, with most screens displaying black backgrounds on white text. Darker UIs can help to stretch out battery life on OLED displays, but that advantage does not exist when using LCD, which requires a backlight to illuminate all pixels regardless of color. Without a dark UI, an iPhone with OLED wouldn"t be able to realize the same level of power savings.

Estimates from earlier this year concluded that the AMOLED panel in the Apple Watch is far more costly than a traditional LCD display, despite just being 1.5 inches in its largest size.

Minebea has also said it is working with other suppliers on next-generation, ultra-thin LED chips and optical sheets. Further innovations in that space are expected to boost LCD competition with AMOLED.

Smartphone displays may all look the same to some users. Although if you’d compare phones and look at the specs sheet, you may see some unfamiliar abbreviations when you check the technology used on the screen.

Let’s first start with the basics. An LCD or Liquid Crystal Display is a type of panel that uses liquid crystals which are back-lit. It’s one of the most common and widely-used technology since they are easily manufactured and doesn’t cost a lot to produce.

Short for Thin Film Transistor, TFT  LCD is basically an improved version of LCD wherein an extra transistor and capacitor are both attached to each pixel. This is the same active matrix (AM) technology used in AMOLED displays which we’ll discuss later on.

Because of this, TFT LCDs are able to produce images with better contrast than the usual LCDs. They are also still cheap to produce. Although, viewing angles generally aren’t that impressive while color reproduction is a bit altered. They are now commonly used in low-end devices.

If TFT has one sheet of transistor supporting each pixel, LG Display’s IPS or In-Plane Switching LCDs make use of two transistors for each pixel which is then illuminated with a stronger backlight. This results to way better viewing angles than TFT and a more faithful color reproduction. Any image viewed within 178 degree from all four sides will retain clear details.

One downside, though, is that since it uses a more powerful backlight, it requires slightly more power from the battery as compared to handsets that use non-LCD panels. These are used in majority of handsets today.

A Super-Twisted Nematic display is a type of monochrome passive-matrix LCD that has an even lower cost of production than TFT LCDs. It also consumes less power than both the TFT and IPS displays which is a good thing, but the issue here is that it shows lower image quality and slower response time than TFT panels.

Additionally, STN LCDs can also be reflective which makes it visible even under direct sunlight. Because of this, it is being used for inexpensive phones and informational screens of digital devices.

TFD stands for Thin Film Diode which was made as a sort of getting the best of two things. It has the low power consumption of STN LCDs but since it doesn’t yield very impressive picture quality, it made use of the imaging performance of a TFT LCD.

This specific type of screen is from Samsung Mobile Display and was introduced back in 2010. Super PLS (Plane to Line Switching) were made for LCDs and is an improvement to LG Display’s IPS panels. The company claims that Super PLS is ‘about 100%’ better when talking about viewing angles — putting it in the league of AMOLED displays. It is also 10% brighter which would greatly benefit users when used outdoors.

The Active-Matrix Organic Light-Emitting Diode, or simply AMOLED, was started to be used in mobile phones in 2008. As we’ve mentioned earlier, it uses active matrix but this time for OLED pixels which is simply another term for thin-film display technology . It basically generates light upon electrical activation after combining with a TFT array and has all the characteristics of an OLED display like lively color reproduction, high brightness and sharpness, and is lightweight.

One of the noticeable differences of using AMOLED screens is its deep blacks. This is possible since OLED displays are always off by default unlike LCD panels that are always back-lit. Apart from showing true blacks (since the cell is basically turned off), it also consumes less power.

These are some of the reasons why it quickly gained popularity on high-end devices and because of this, more manufacturers have made the switch from TFT LCDs. Of course, it also has some cons to it. AMOLED displays don’t perform as well as back-lit LCDs under direct sunlight and diode degradation happens over time since they are organic.

Rounding up the list is the Super AMOLED display that we commonly see on mid- to high-end Samsung handsets. They are obviously an advanced counterparts of AMOLED displays from the South Korean company and are built with touch sensors right on the display unlike implementing a separate touch-sensitive layer. This move makes Super AMOLED displays one of the thinnest displays available for electronic devices.

In addition, they are also a lot more responsive when compared to AMOLED displays. Performance outdoors where there is direct sunlight has also improved here while requiring even less power from the battery.

Every AMOLED display has a backplane that determines when individual pixels turn on and how bright they glow. Most backplanes use two separate transistors (TFTs) – one for switching on a pixel (Switching TFTs) and one for maintaining its brightness (driving TFTs). The Driving TFT is also accompanied by a Capacitor that samples and holds a voltage to uniformly drive a pixel brightness.

LTPO displays use faster LTPS for switching circuits and more power-efficient IGZO material for driving circuits (more on that in a bit). Faster LTPS switching circuits make dynamically changing refresh rates possible (VRR on phones) and power-efficient IGZO driving TFTs help to reduce power consumption by 5 to 20 percent.

As described above, each AMOLED pixel comprises of two Thin Film Transistors (TFT)- Driving TFT and Switching TFT- and one Capacitor. In an LTPO display, the switching circuits use LTPS TFT and driving circuits use IGZO TFT.

Amorphous Silicon (a-Si) TFT technology used to be dominant for display backplanes. With a need for high resolution and brighter screens, the industry shifted to LTPS TFT backplanes (for both OLED and LCD), and then the need for higher resolution and high-refresh-rate brought in more complicated IGZO TFT (Oxide TFT) panels.

IGZO (indium gallium zinc oxide) backplane technology or transistors used in backplanes that are often used for IPS LCD displays. IGZO transistors are transparent and thus IGZO backplane displays require less backlight power and consume less power. Electron Mobility of IGZO is as high as LTPS and these displays are more touch-sensitive (we are guessing the use of IGZO in Samsung Galaxy Note20 Ultra’s display plays a major role in reducing S Pen latency to 9ms).

So, the LTPO display combines the benefits of both LTPS and IGZO resulting in a more responsive screen that consumers lesser power than conventional LTPS screens. As stated above, in LTPO panels, the switching circuits use LTPS TFTs and the driving TFTs use IGZO materials.