7 inch tft lcd multi information display in stock

Whether you"re commuting, running errands, traveling on vacation, or just backing out of your driveway, knowing exactly what"s behind you is important for safety. A rear-view or back-up camera and monitor can help to protect your car, your person, your passengers, and pedestrians. Here are some tips for choosing TFT (thin-film transistor) LCD video monitors and cameras to provide a field of vision that can enhance your peace of mind behind the wheel.

Some kits come with just a waterproof rear-view camera with night vision, without any type of monitor. These can be plugged into a DVD player, a monitor you purchase separately, or an existing display unit in your car. Other kits will come with both a rear-view camera and a TFT LCD monitor of some kind, while other kits will only offer a monitor without the backup camera. Some kits come with multiple cameras for larger vehicles and can even include a multiview display so you can see what the entire camera system is seeing at once. Which kit you choose will depend on your individual needs and the size of your vehicle.

In many cases, you can install a rear view camera and 7-inch LCD monitor yourself. This depends on whether you already have a monitor of some kind installed in your car, or if you choose a monitor that simply mounts on the dash or a wireless monitor. If the monitor needs to be installed in the dash and wired into the electrical system; however, you may need professional installation. Many backup cameras simply screw onto your license plate with existing screws and take little time to install. Some cameras are also wireless and will beam the image straight to a Bluetooth wireless monitor.

ER-TFT070A2-4 is the updated part number of ER-TFT070-4. It"s 800x480 dots 7" color tft lcd module display with ILI6122 driver ic,optional capacitive touch panel with controller and connector,optional 4-wire resistive touch panel screen with connector,superior display quality,super wide view angle and easily controlled by MCU such as 8051, PIC, AVR, ARDUINO, ARM and Raspberry PI.Equivalent with AT070TN90,AT070TN92.

It can be used in any embedded systems,car,mp4,gps,industrial device,security and hand-held equipment which requires display in high quality and colorful image.It supports rgb interface. FPC with zif connector is easily to assemble or remove.

【Plug and Play】 No driver needed.You don"t need to install any driver and just connect the HDMI port and Micro USB port from display to your device.Backlight can be turned off to lower power consumption.

【Strong System Compatible】Support Windows operating systems,Mas OS and other systems.When works with Raspberry Pi, supports Raspbian/Ubuntu MATE/Lubuntu/Snappy Ubuntu Core/Kali/OSMC/Retropie/WIN10 IOT, driver free; When work as a computer monitor, supports Windows XP/10/8/7 and Mas OS

【Widely Application】This touch display can be used for security monitors and other multi-purpose displays, network player boxes, raspberry pi, HD DVR, high-end instruments,extended laptop monitors.

The Capacitive touch panel is activated with anything containing an inductive load such as a finger or stylus. It allows for multi-touch options. When using the capacitive touch screen, the display needs a separate controller to interface with the touch panel. The display for capacitive touch is brighter since the touch panel is transparent.

The Transmissive polarizer is best used for displays that run with the backlight on all the time. This polarizer provides the brightest backlight possible. If you have a need for a bright backlight with lower power drain, transmissive is a good choice for this TFT LCD display.

Focus LCDs can provide many accessories to go with your display. If you would like to source a connector, cable, test jig or other accessory preassembled to your LCD (or just included in the package), our team will make sure you get the items you need.Get in touch with a team member today to accessorize your display!

Focus Display Solutions (aka: Focus LCDs) offers the original purchaser who has purchased a product from the FocusLCDs.com a limited warranty that the product (including accessories in the product"s package) will be free from defects in material or workmanship.

7inch HDMI LCD(C) supports various systems like Raspberry Pi, Banana Pi, Banana Pro, and BB Black to provide Lubuntu, Raspbian, and Angstrom images with a high resolution of 1024×600 and a Capacitive Touch Screen. Besides, it upgrades to an IPS screen with a larger visible angle and more clear display effect. Broadly you can apply it to raspberry pi, HDMI display screen, and other mini PC or even computer displays. If you gonna use it on raspberry pi zero and BB Black, you need to buy HDMI connect wire for the use and for raspberry pi zero you also need to buy A USB type A micro cable. Matched with raspberry pi, it supports raspbian, ubuntu to do single touch without touch, and while as A PC display, it supports Windows 10 / 8.1 / 8 / 7 to do the five-point touch without drive. For the Windows 10/8.1/8 OS, the touch screen supports multi-touch up to 10 points. For some Windows 7 OS, the touch screen supports single touch only. When working with Raspberry Pi, you should set the resolution of the LCD by yourself, or else the LCD screen will not work. When working with Beagle bone, this LCD module is used for display only so you can program the latest Angstrom image file to the board directly without any change. The BeagleBone will read the display parameters of the 7-inch HDMI displayer and set the resolution to 800*480 automatically.