black line on lcd screen for sale

If you are careful you can troubleshoot the problem yourself. You will have to work with the back panel removed leaving boards exposed that contain very high voltages.

With the back panel removed at the top of the casing you will see a long circuit board (Usually about the length of the screen) There will be a number of ribbon cables plugged into it, coming from the front of the casing, the cables power different sections of your LCD screen.

Now with the TV propped up power it on and play something as you normally would, find the ribbon cable at the top that is closest to the lines on the screen, carefully you should be able to move the cable a little, see if the screen corrects itself.

Now lift the tab for the cable you identified and push it in fully and clip the tab back down on it, turn on the TV and see how the picture looks, if it is good then close the machine back up and enjoy some TV.

TV screen lines are an irritating occurrence, and many different issues with the TV can cause them. This article will go over what causes this, whether or not you can fix it depending on the cause, and how to fix it.

When any part of a TV"s display gets damaged, corrupted, or is defective, it can cause lines to appear on the screen. Some TV parts that can cause horizontal lines to appear are the LCD panel, T-Con board, or row drivers.

Issues with these parts can happen for many reasons, and the way your lines appear can tell you a lot about what"s wrong. If the lines are new, one of these parts was likely damaged.

If you"re seeing colored horizontal lines, it may be because of the T-Con board. If other parts don"t seem to be an issue, this part of the TV could be causing the lines.

If lines appear on your TV, you"ll want to inspect the TV itself. You can fix some issues that cause lines to appear, but others may require a professional or a new TV altogether. Some of the most common causes of horizontal lines are:

LCD screen damage. The LCD provides your TV display with light. If you"re handy, you might be able to fix this by doing a little work with the insides of the TV, which you can read about below.

Other devices you"ve connected to the TV. They may also be having issues of their own or might not be compatible with your TV. In this case, you"ll have to inspect the device instead of the TV.

All these issues can be fixed, though it ranges in difficulty. If you"re unsure how to repair your TV, you may want to get the TV professionally repaired.

Knock or tap on the back of your TV. If the issue is with cable connections, this could solve the problem. It could also indicate a problem with your T-Con board. It won"t fix the issue, and the lines may reappear, but it can give some insight into the problem. If it"s your T-Con board, you"ll want to have T-Con replaced.

Run a picture test on your TV. It"s a built-in feature on newer TV"s which allows you to see if the TV display is corrupted. Doing this may look different depending on your TV, but generally, you can go into the settings and find a support option or just a picture test option.

Take a look at the LCD screen. If it"s damaged, you may want to get the screen repaired or replaced. It may be a less costly option than buying a new TV altogether.

Vertical lines on a TV appear for the same reasons as horizontal lines: loose cables and wires, screen damage, or a faulty T-Con board. Leaving the TV turned on for too long can also cause vertical lines.

The steps for fixing lines on your TV will also work to fix TV glitches like flicker and stutter. For example, check the cables and connectors and ensure there"s no issue with your input device.

If your TV screen looks blue, it could be faulty connections, a defective backlight, or incorrect color settings. Some LED TVs naturally have a blue tint, which you can offset by changing the color temperature.

To fix screen burn on a TV, adjust the brightness settings and enable pixel-shift. Sometimes playing a colorful video with fast-moving action for half an hour might help.

The appearance of static or flickering horizontal lines on a computer screen can be frustrating and inconvenient, but there are many steps you can take to try to fix your problem. This guide will walk you through various checks and fixes you can perform on your computer and its monitor to find out why the lines are appearing and what to do to make them disappear.

Horizontal lines on a computer monitor can be caused by overheating or physical damage to the monitor and connecting cables. Conflicts between the screen and selected screen resolution and refresh rate settings can also cause line problems, as can out-of-date device drivers and operating systems.

Try a different monitor. If possible, try connecting to a different monitor or screen. It can help you determine if the lines are caused by your computer’s screen or the computer itself.

Check your monitor while it’s disconnected. Keep your monitor powered on, unplug it from your computer, and look for any flickering or lines on its screen while it’s disconnected. If you see any kind of distortion, this means that your monitor is damaged.

Close and reopen your laptop. Close your laptop’s screen, wait a few seconds, and reopen it again slowly. Look to see when the lines begin to appear on the screen as you open the laptop. If the lines only occur at a certain angle, the cause is likely damaged wiring.

Check the monitor connection. Ensure all of the cables are securely connected, and watch for any improvements in screen image quality while you’re inspecting the cables. If you notice the image improves or worsens while touching the connecting cable, it may need replacement.

Remove magnets and electronics. If you have other electronics or magnetic devices near your computer, screen, or the connecting cables, move them somewhere else as they may interfere with the connection and cause the lines.

Calibrate your monitor. This process should only take a few minutes and can help optimize your monitor for use with your computer and its environment.

Run a troubleshooter. Open Settings and select System > Troubleshoot > Other trouble-shooters and run the Video Playback and Program Compatibility trouble-shooters. If you get presented with any recommendations for other trouble-shooters, run those too.

Reset your monitor to its factory settings. If you’re using an external monitor or screen, use its built-in settings, not your computer’s settings, to reset it to its factory settings. You can usually access these settings via a physical Settings or Menu button on the computer monitor itself.

If your monitor is displaying a message that reads "no input signal," you may have a defective cable or component. To troubleshoot the issue, turn your computer off and on again. Also, unplug the monitor-to-PC cable and plug it back in, making sure the connection is secure. Try another monitor to see if the problem is with your PC. Also, try resetting your video card; if nothing else works, replace your video card.

To fix coloration and distortion on a computer screen, power the monitor on and off, restart the computer, and make sure the cable between the monitor and computer is connected securely. If you"re using a CRT screen, try degaussing the monitor. You can also try adjusting your video card"s quality settings and experimenting with your monitor"s adjustment buttons.

To fix screen burn on a monitor, also called "ghosting," try turning off your display, ideally for at least 48 hours. Also, try setting your screensaver to an all-white image and letting it run for a few hours. You can also try using the JScreenFix tool, which fixes stuck pixels.

That looks like a problem with the actual lcd panel (ie. the physical screen). I assume those blacks marks stay exactly the same no matter what is on the screen (IE. while loading Windows, logging in, on desktop, etc)?

The answer would be to have the screen replaced - this is a simple job for a repair shop to do for most laptops. Doesn"t usually cost too much either.

Harassment is any behavior intended to disturb or upset a person or group of people. Threats include any threat of suicide, violence, or harm to another.

So I noticed this little line hardly visible at all on my computer screen. It looks like somebody took the pencil tool from wndows paint and drew a little spec on the screen. I thought it would go away after restarting but Its been a couple weeks now and its 3 times the size, still not big but its a little black line about the size of your pinky finger nail. Again it looks like a line drawn by windows paint or something . Like this _____ maybe a tiny little bit blacker but thats pretty much exsactly what it looks like and you get the point. Its not a spot or circle, it a line, looks like a glitch which is why i thought it would go away. Anyway, anyone know what is causing this? how to make it go away? Nothing happened to my comp as im the only one who uses it. I just turned it on one day and it started growing.

The black line is in windows all the time! it doesn"t leave and i tried taking a screen shot but it doesn"t seem to pick up the line, i don"t know why. I would have to take a pic with a camera and put it on my comp but i don"t know how to make it so that you can see the pic on the internet.

Eight black lines or bars appearing on the LCD indicate that the machine is in the firmware installation mode. This may be accompanied by intermittent beeping.

$NOTE:The machine will be in this mode because either the 5 key was pressed/stuck when the machine was powered on or a firmware update was interrupted before completion.

5. If the black lines still appear on the LCD, the firmware has been corrupted. This occurs as a result of interrupting a firmware update. This cannot be corrected by troubleshooting, but the situation can be quickly resolved by an Authorized Service Center (ASC). The repair cost for this issue will be covered by Brother.

Watching your mobile screen with those white or black vertical/horizontal lines is annoying. In short, it’s tough to use a phone with these lines appearing on the screen. Typically, this issue is associated with the LCD, caused by a faulty hardware component in your device due to some accidental fall or water damage. Phones with such damages can only be fixed at a phone repair center.

If you are itel, TECNO or Infinix phone user and is troubled with vertical and horizontal line issues, make a reservation now without waiting time at the service shop. Carlcare Service will fix your phones easily. If your phone is under warranty, Carlcare can also save you repair costs. Check warranty now>>

However, sometimes the culprit could be an app or software glitch, hindering the functionality of key components like display assembly or motherboard. In that case, you can tackle the situation at home.

Before you head on to the fixes, let’s make your phone data safe. Sometimes, these lines are irreversible, and even the solutions you’re up to try may be followed by some sort of data loss. Therefore, the first thing you should do is make a backup of important files and apps on your device. Some popular ways for data back in Android devices are via:

In case you’re not sure about the process, it’s better to take help from a professional repair center. For Infinix, Itel, and TECNO users, Carlcare Service - being their official service center for these brands- is a recommended place to go.

If there’re white lines on the screen, this solution may prove effective. A battery cycle is when you charge a mobile to 100% and let it drain to 0% again. Usually, the lines will disappear soon as you charge the battery fully.

If the above methods don’t work, it’s time to try this masterstroke. Using your phone in a safe mode will confirm if the lines are because of some faulty app or software.

Check if the lines are gone! If yes (hopefully), then a third-party app is the culprit. Now uninstall the latest downloaded applications until the issue is gone. OR you should try the Solution:4

Suppose the lines are still visible. Then the issue is most likely due to some hardware failure- and the best option for you is to take your device to a reliable repair center.

It won’t be aggregation if you call “Factory Reset” the mother of all solutions. It fixes most of the issues caused by an app or software glitch. The process actually brings your phone back to the factory setting by erasing all the apps and files you’ve downloaded post your phone purchase.

If the horizontal or vertical lines still appear on your phone screen after trying all the above methods, you better take your device to a reliable mobile repair store near you. Most likely, it’s a faulty hardware component that needs to be repaired or replaced. Here, we would suggest you opt for only an authorized service center, as this will ensure flawless repair at a reasonable cost. Besides, if any of the components have to be replaced, they will be genuine and as per your specific requirements.

If this issue arises in your Infinix, Itel, or TECNO phone, Carlcare Service is here to help you! Pay a visit to your nearby Carlcare center. Our highly skilled technicians will fix the issues and saves you much trouble.

As the official service center part, we provide 100% original spare parts and various value-added services for Infinix, Itel, and TECNO users. Now with the online reservation service through Carlcare App, you don’t need to wait while your phone is repaired at our service centers.

Vertical and horizontal lines on the best desktop monitors can ruin the immersive effect from your display, which is especially frustrating if you’ve invested into your monitor, like one of the best curved gaming monitors. To find out how to fix annoying vertical lines or horizontal lines on an external monitor, you’ll first want to test the picture to find out what causes these lines on the computer monitor, whether the problem is from the PC, cable box or another input source, or if the fault is with the monitor, its LCD panel or internal hardware itself. And while on the topic of “vertical” lines, there are vertical monitors that exist to help make certain professions or hobbies more efficient, like coding and streaming.

Before attempting any other troubleshooting, such as fixing black bars on the side of your monitor, the first step toward finding solutions for this desktop monitor problem is to isolate the source of the issue.

The first option is to test out the image on your favorite computer screen without any peripherals connected. To do this, disconnect all cable connections and use the remote control or the control panel to disconnect Bluetooth and WiFi, if your external monitor is so equipped. If there are no vertical or horizontal lines on the default picture or menu screen, then the problem is likely due to your PC or input device, or to your cable connections. If the lines still appear, then the issue is likely to be with the external monitor itself.

If the monitor shows lines when not connected to any cables or input method, the problem is likely with the monitor itself. Image issues such as lines can be caused by damaged internal ribbon cables or the LCD panel itself. If this is the case, the repair process will depend on what the hardware problem is, whether you have a flat or curved computer monitor. If you see light leaking on the edges of your monitor screen, you may have blacklight bleed, which you can learn about in our resource content on what is blacklight bleed.

If the lines go away when your external monitor has no input, then you’ll want to look for a connection issue or an issue with your PC or laptop’s graphics drivers, driver settings, or picture settings. Additionally, you may want to check for any input lag issues with your monitor at this time.

Make sure all cables are connected securely. A loose connector can cause various picture issues including gray lines, pink lines or green lines.You may want to unplug your monitor from the input device and check the condition of the ports. You may be able to see if there are any bent or broken pins in the connectors of these input terminals. Double-check the cables if you have two monitors. If you need more organization in your space, consider the best dual monitor mount. Don’t use a paperclip or other metal object to try and clear out a VGA terminal.

If you find a damaged part, you can either consult a repair service or professional repair technician, or you might want to fix it yourself using an electronics repair kit. Use caution when removing ports, and always unplug a monitor before working on a repair.You may need to consult the owners manuals to see what types of repair tools will be needed.If the cable is faulty, the solution may be just to buy a replacement cable. That may be the best path if you need to immediately fix your monitor and can’t spend time researching and repairing the damaged part on your own, like if you use your monitor for work like a monitor for video editing.

Look for any video card drivers or graphics card driver that has a yellow exclamation mark or question mark. These common error notifications may mean your laptop or PC graphics drivers are out of date. Many graphics cards offer a driver updater tool. You can also consider buying a new, updated graphics card.

Alternatively, you can run a system scan to discover errors and graphics driver software issues. If there is a problem with your graphics card driver, it may show up on a system scan. Try booting up in safe mode or BIOS, if available; this will often show whether the display issue is a software problem or a hardware problem.

A screen resolution adjustment may also help. If the device picture settings are not compatible with the monitor’s native resolution, you may see errors such as lines on the screen. On a windows PC, setting a display resolution or refresh rate that is not supported can damage a monitor.This is more often a risk with older CRT monitors.

Warning: If the device picture settings are not compatible with the monitor’s native resolution, you may see errors such as lines on the screen. On a windows PC, setting a display resolution or refresh rate that is not supported can damage a monitor

Explanation of why pulse width modulated backlighting is used, and its side-effects, “Pulse Width Modulation on LCD monitors”, TFT Central. Retrieved June 2012.

However, if the digitizer or LCD is also damaged during a fall, that screen no longer carries value because it cannot be refurbished. Repair shops cannot sell broken LCDs to refurbishing companies; therefore, they cannot offset the cost of an LCD repair. That is why repair stores often charge a little extra if there is damage to the LCD or digitizer, to make up for that loss. Repair stores that don’t have an additional charge for an LCD repair typically inflate their glass repair price to make up for the loss from damaged LCDs. If they have one price, that means everyone is paying more to cover the cost of customers who have damaged LCDs and customers who only have cracked glass. This is why TCR separates the price of glass and LCD repairs for you! If you only have cracked glass, you only have to worry about paying to replace the cracked glass.

If your phone or tablet’s glass is shattered there will be cracks or chips on the screen itself. If it is just the glass that is damaged, the device may still function and you may be able to use it normally. If this is the case, it is likely that only the glass needs to be replaced. To prevent further damage to your device it is best to get it repaired quickly. For example, if liquids seep through the cracks it could cause permanent damage to the LCD.

Many people may continue to use their touchscreen with shattered glass and delay fixing the glass on their devices; however, if the touchscreen isn’t responsive, it could be a sign of more significant damage to the device’s digitizer which is integrated with the LCD screen.

A pixelated screen can indicate LCD damage. This would look like a patch of multicolored dots, a line or lines of discoloration, or a screen with rainbow colors. For many people, these colors are an easy way to know that their LCD is broken and that they should get it repaired.

Dropping your phone isn’t the only reason you’ll end up with a pixelated screen. Over time, your screen’s LCD may break down through regular use. This happens to other devices aside from your smartphone or tablet. Pixelation can happen to TVs and computers, too. People typically decide to buy a new device when this happens. Fortunately, with an LCD repair, you can fix the device without needing to replace it.

A black screen or black spots on your smartphone or tablet is an indication of a damaged LCD. Often with a bad LCD, a phone may still turn on and make noises, but there is no clear picture. This does not necessarily mean any other part of the phone is damaged and a simple screen replacement will get it functioning again. Sometimes it can mean a battery or other internal component is damaged. It is best to have a highly qualified phone repair technician diagnose what is wrong so the appropriate repair can be made.

Fortunately, your mobile device is fixable whether you cracked the glass or damaged the LCD. Stop by or call TCR: Triangle Cellular Repair at (919) 263-2699 for a free diagnostic and quick, affordable cell phone repair in Chapel Hill and surrounding areas. We’re always happy to help!

Back in April last year, Lionel blogged about a vertical line issue that could potentially affect customers who own 17" Inspiron 9200, 9300, and XPS Gen 2 notebook LCDs.

After engaging our engineering and product group teams, as well as the LCD manufacturer, to investigate and isolate the cause of this issue, we narrowed the problem down to a specific part within a certain date range. During that research, we found that the part may also affect the Inspiron 6000, 8600, Latitude D800, D810, and Precision Mobile Workstation M60 and M70 LCDs. That led to Lionel"s second blog post on the topic.

We"ve taken steps to contact those who may be affected to offer a warranty replacement and also put in place measures to rectify any out of pocket expense incurred by out of warranty customers who replaced the affected screens in the past.

Since then, comments have hit our forums and blog site about other potentially affected systems and possible causes and fixes for them. We"ve gone back to our engineering and product group teams and verified that the part causing this issue:

That said, there are other variables that can lead to vertical and horizontal lines on other system types regardless of size or model. Lines on an LCD can appear sporadically, at random places on the screen, and for what appears to be for no reason at all. These lines can be caused by normal LCD failures brought on by a multitude of variables, which I"ll try to cover here. Vertical lines tend to be a more common issue in notebooks, primarily because they are subjected to more wear and tear on a daily basis than a desktop LCD.

The most common cause of these lines is simply a loose connection. As notebook systems are carried around, no matter how careful we try to be, they have a tendency to be bumped, jarred, and even sometimes the heart stopping drop. Though today"s notebooks are designed to better absorb and dissipate small shocks, it can still have adverse affects on the notebook"s internal components. A good bump or series of bumps and random movements can cause the LCD cable to become loose. The connection remains intact, but some breaks in the signal can lead to impurities in the reproduction of the image on the screen. Think of a loosely-fastened garden hose… water will still be directed and outputted through the end of the hose, but some water is lost at the connection. This is easily fixed by tightening the hose. Similarly, the LCD can usually be fixed by simply making sure the connection is secure. (Service manuals for Dell systems can be found here on support.dell.com.)

A golden rule of any seasoned technician when it comes to cable connections: don"t just check the connection, reseat it. This applies to more then just cable connections (memory, wireless cards, hard drives, optical drives, etc…) There are a few reasons for this, the first being temperature. With so many components designed into such a small case, heat is inevitable. These temperature variations can lead to things like "chip creep" and oxidation. Removing the cable and firmly, but carefully reseating it should solve this problem by not only making sure that the connection is properly seated, but also that the pins are free from oxidation.

The second reason is debris. If you"ve ever opened up your notebook to clean the keyboard or for maintenance, you might see any number of things such as food particles, hair, paper, dirt and dust. Some of these objects are small enough to get into the connections and cause problems. This is one of the reasons that regular cleaning of your notebook and desktop PCs should be done. The problems caused by debris can usually be quickly cleared up by a can of compressed air and a little time and effort.

If these simple fixes don"t seem to work, then we need to look at the actual failure possibilities. Vertical or horizontal lines that don"t disappear after the basic troubleshooting are usually caused by circumstantial failures. The most common type of failure that leads to lines on the display is an open circuit connection between the driver IC (flexible circuit board) and LCD glass. This is usually caused by external stresses (mechanical, thermal, etc…), which causes the flex circuit to detach from the glass. The variables leading to the detachment are wide and are dependant on individual cases. With the amount of travel and various operating environments of a notebook, pinpointing the exact cause can be near impossible, unless of course the problem immediately follows a catastrophic event such as dropping the notebook or prolonged exposure to heat or cold, such as leaving the system in a car.

Investigations into technical problems, including which systems, batches, and date ranges are affected, are rigorous, and we strive for accuracy. Unfortunately, not every technical problem can be traced down to the root cause. But in every case, we try to proceed appropriately and in all fairness to affected customers.

If you are experiencing any problem with lines on your LCD and your system is not one of the potentially affected units, or in the date range outlined in Lionel"s earlier posts, please contact technical support to troubleshoot and identify possible fixes. See below for details on how to do that.