3.5 inch tft lcd replacing a 3.5 inch oled manufacturer

Our new line of 10.1” TFT displays with IPS technology are now available! These 10.1” IPS displays offer three interface options to choose from including RGB, LVDS, and HDMI interface, each with two touchscreen options as capacitive or without a touchscreen.

The new line of 3.5” TFT displays with IPS technology is now available! Three touchscreen options are available: capacitive, resistive, or without a touchscreen.

Our new line of 3.5” TFT displays with IPS technology are now available! With In-Plane Switching (IPS) technology, these displays are capable of truer color reproduction, more consistent color from any viewing angle, and sunlight readable screens due to their brighter backlights. It’s clear to see why IPS is the most superior of TFT display types.

In addition, these 3.5” IPS displays do not lighten or have tailing when touched, making them ideal for use in touchscreen devices. Three touchscreen options are available including capacitive, resistive or without a touchscreen. There is an additional resistive touch model available as an EVE2 module. This advanced TFT module is assembled to a custom PCB that offers an all-in-one solution for managing graphics, touch, and audio with the graphic engine made by FTDI/Bridgetek. These HMI displays provide a lot of powerful capabilities and are now finally available in a 3.5” size IPS TFT screen. Added design improvements of this new IPS TFT line include better EMC with built-in EMI shielding and a better FPC design that is more durable with a larger bendable area and smaller component area.

Finally, these new 3.5” IPS displays offer a replacement option to the TN models due to their same mechanical footprint and pinout. However, they are not a drop-in replacement due to the differences in the software timing requirements of the old and new driver ICs used within these displays.

※ Price Increase NotificationThe TFT glass cell makers such as Tianma,Hanstar,BOE,Innolux has reduced or stopped the production of small and medium-sized tft glass cell from August-2020 due to the low profit and focus on the size of LCD TV,Tablet PC and Smart Phone .It results the glass cell price in the market is extremely high,and the same situation happens in IC industry.We deeply regret that rapidly rising costs for glass cell and controller IC necessitate our raising the price of tft display.We have made every attempt to avoid the increase, we could accept no profit from the beginning,but the price is going up frequently ,we"re now losing a lot of money. We have no choice if we want to survive. There is no certain answer for when the price would go back to the normal.We guess it will take at least 6 months until these glass cell and semiconductor manufacturing companies recover the production schedule. (Jun-01-2021)

ER-TFT035-3 is 320x240 pixels 3.5 inch color tft lcd display with HX8238 controller,optional 4-wire resistive touch panel with soldering type FPC or connector type FPC and optional capacitive touch panel with controller,superior display quality,wide view angle and easily controlled by MCU such as 8051, PIC, AVR, ARDUINO and ARM .It can be used in any embedded systems,industrial device,security and hand-held equipment which requires display in high quality and colorful image.It supports rgb interface. FPC with zif connector is easily to assemble or remove.

This website is using a security service to protect itself from online attacks. The action you just performed triggered the security solution. There are several actions that could trigger this block including submitting a certain word or phrase, a SQL command or malformed data.

PO Box, APO/FPO, Alaska/Hawaii, Angola, Asia, Barbados, Benin, Bermuda, Botswana, Burkina Faso, Burundi, Cameroon, Canada, Cape Verde Islands, Central African Republic, Central America and Caribbean, Chad, Comoros, Côte d"Ivoire (Ivory Coast), Democratic Republic of the Congo, Djibouti, Egypt, Equatorial Guinea, Eritrea, Ethiopia, Europe, French Guiana, French Polynesia, Gabon Republic, Gambia, Ghana, Greenland, Guadeloupe, Guinea, Guinea-Bissau, Kenya, Lesotho, Liberia, Libya, Madagascar, Malawi, Mali, Martinique, Mauritania, Mauritius, Mayotte, Mexico, Middle East, Morocco, Mozambique, Namibia, New Caledonia, Niger, Nigeria, Oceania, Republic of the Congo, Reunion, Russian Federation, Rwanda, Saint Helena, Saint Pierre and Miquelon, Senegal, Seychelles, Sierra Leone, Somalia, South Africa, South America, Southeast Asia, Swaziland, Tanzania, Togo, Tunisia, US Protectorates, Uganda, Ukraine, Venezuela, Western Sahara, Zambia, Zimbabwe

Over the years, LCD modules and LCD displays have grown in popularity. Companies in many different industries, including but not limited to the medical, automotive, consumer, food services, industrial, and technology sectors rely on at least one TFT LCD module or TFT LCD display on a daily basis. Although touchscreens are very durable and designed to withstand the hands of time, older modules and displays sometimes need to be repaired. When weighing the cost of having your displays repaired, you should take the time to consider your options.

After doing some research on the cost of repairs, many business owners find that it makes more sense to have their TFT LCDs replaced. Although units may cost less to repair initially, the cost of having to repair your older displays over and over again can add up. This is because older units may need to be repaired more than once. Even if multiple repairs will not cost any additional money, repairs lead to downtime and can have a tremendous impact on your business.

Older units in need of repair can have a long-term impact on a company’s bottom line. This is because outdated displays do not perform as well as new and improved displays. As many business owners have come to discover, new and improved touchscreen technology can increase efficiency, boost productivity, and improve customer satisfaction. This a top reason why so many companies decide to have a TFT LCD display or module replaced.

If you are thinking about having your older touchscreens repaired, then you should consider how having newer technology in place will help your business grow. Focusing strictly on the cost of replacing your displays can have a long-term impact on your business in more ways than one. For better results, you should consider all of the benefits of having new custom touchscreens specifically manufactured for your business. Ultimately, having new and improved displays in place for your employees and customers to use will be a business decision that pays for itself over time.

3.5inch RPi LCD (A) and 3.5inch RPi LCD (B) are hardware compatible with each other (uses different driver), and can be mutually substituted in most cases. (A) for low cost ver. while (B) for IPS ver. with better displaying.

Why the LCD doesn"t work with my Raspbian?To use the LCD with the Raspberry Pi official image, driver (SPI touch interface only) should be installed first. Please refer to the user manual.

However, for the first testing, you may want to use our image directly (if provided).Why the LCD still doesn"t work with the Waveshare provided image?Make sure the hardware connection is correct and connects fine.

The PWR will keep on and the ACT will keep blinking when the Raspberry Pi starts up successfully, in case both of the two LEDs keep on, it is possible that the image was burnt incorrectly OR the TF card was in bad contact.Which power supply should I use?It is recommended to use a 5V/3A power adapter for the Raspberry Pi other than USB connection, otherwise the Pi may failed to start up because the PC"s USB port might have not enough power.

Since the first-generation Raspberry Pi released, Waveshare has been working on designing, developing, and producing various fantastic touch LCDs for the Pi. Unfortunately, there are quite a few pirated/knock-off products in the market. They"re usually some poor copies of our early hardware revisions, and comes with none support service.

The UCTRONICS 3.5 Inch touch screen is the same size as the standard Raspberry Pi model B/B+, and well-mates with the Raspberry Pi boards. With a tiny size, vivid image, and responsive touchscreen, it is definitely ideal for portable devices and multimedia projects. It is a great replacement for a heavy and bulky HDMI monitor, keyboard, and mouse

Step1: Align the pin 1 of the edge connector between the LCD display and Raspberry pi board, connect the pin 1,2,3,4 then pin 19,20,21,22,23,24,25,26.

Attention: If you want to use the touch function, you need to download and install the driver manually refers to the instructions we provided. The driver includes the settings of the Raspbian OS resolution and touch screen support.

Attention: If you use this display without a Pi, the touch function is not available because the touch function of this display just supports the Raspbian system. Meanwhile, an extra HDMI cable also is required for the video transmission.

3.5inch RPi LCD (A) and 3.5inch RPi LCD (B) are hardware compatible with each other (uses different driver), and can be mutually substituted in most cases. (A) for low cost ver. while (B) for IPS ver. with better displaying.

By these two functions, You can find out the resolution of the display. Just add them to the code and put the outputs in a uint16_t variable. Then read it from the Serial port by Serial.println();. First add Serial.begin(9600); in setup().