3.2 spi tft display factories quotation
Reason: The hooks on the backight of ER-TFT032-3.1 is always complained by most customers for inconvenient assembly. So we cancel the hooks in the new version of ER-TFT032-3.2.That"s the only difference for these two versions.
ER-TFT032-3.2 is 240x320 dots 3.2" color tft lcd module display with ILI9341 controller and optional 4-wire resistive touch panel and 3.2 inch capactive touch panel with controller FT6236,superior display quality,super wide viewing angle and easily controlled by MCU such as 8051, PIC, AVR, ARDUINO ARM and Raspberry PI.It can be used in any embedded systems,industrial device,security and hand-held equipment which requires display in high quality and colorful image.It supports 8080 8/16-bit parallel,3/4-wire serial interface. FPC with zif connector is easily to assemble or remove.Lanscape mode is also available.
Of course, we wouldn"t just leave you with a datasheet and a "good luck!".Here is the link for 3.2"TFT Touch Shield with Libraries, Examples.Schematic Diagram for Arduino Due,Mega 2560 and Uno . For 8051 microcontroller user,we prepared the detailed tutorial such as interfacing, demo code and development kit at the bottom of this page.
ER-TFT032A3-3 is 240x320 dots 3.2" color tft lcd module display with ST7789V controller and optional 4-wire resistive touch panel and 3.2 inch capactive touch panel with controller FT6236,superior display quality,super wide viewing angle and easily controlled by MCU such as 8051, PIC, AVR, ARDUINO ARM and Raspberry PI.It can be used in any embedded systems,industrial device,security and hand-held equipment which requires display in high quality and colorful image.It supports 8080 8/16-bit parallel,3/4-wire serial interface. FPC with zif connector is easily to assemble or remove.Lanscape mode is also available.
Of course, we wouldn"t just leave you with a datasheet and a "good luck!".Here is the link for 3.2"TFT Touch Shield with Libraries, Examples.Schematic Diagram for Arduino Due,Mega 2560 and Uno . For 8051 microcontroller user,we prepared the detailed tutorial such as interfacing, demo code and development kit at the bottom of this page.
A wide variety of 3.2 inch tft lcd module display options are available to you, You can also choose from tft, ips and standard 3.2 inch tft lcd module display,
TFT displays are full color LCDs providing bright, vivid colors with the ability to show quick animations, complex graphics, and custom fonts with different touchscreen options. Available in industry standard sizes and resolutions. These displays come as standard, premium MVA, sunlight readable, or IPS display types with a variety of interface options including HDMI, SPI and LVDS. Our line of TFT modules include a custom PCB that support HDMI interface, audio support or HMI solutions with on-board FTDI Embedded Video Engine (EVE2).
Sunrise Semiconductor, established in the year 2002, with its flagship brand SUN, is a professional and well known LED DISPLAY distributor. With 13 years of extensive experience in the industry and support from reputed manufacturers from Greater China, Korea and Singapore, we make sure Standard brightness, Low current operation, Excellent appearance, Easy mounting on P.C.B or sockets, regularity in supply, strong technical support and above all best competitive prices.
3.30” 128 x 64 Graphic Display The G-12864R4G-VA is a 3.30” 128 x 64 Monochrome LCD Display with a module size of 96.0 x 60.5 x 14.0 and an active area of 72.9 x 40.9. The G-12864R4G-VA 128 x 64 display uses Super Twisted Nematic or Film Compensated Super Twisted Nematic glass with LED backlighting and a reflective, transflective, or transmissive display. View Additional Details Generic Part G-12864R4G-VA Display Format 128 x 64 Graphic Display Module Size 96.0 x 60.5 x 14.0 Diagonal 3.30 Active Area 72.9 x 40.9 Pixel Pitch 0.570 x 0.640 Backlight LED Display Type R,TF,TM Glass…
192 x 64 3.30” Graphic Display The G-1926415C-VA is a 3.30” 192 x 64 Monochrome LCD Display with a module size of 100.0 x 60.0 x 12.0 and an active area of 78.68 x 26.2. The G-1926415C-VA 192 x 64 display uses Super Twisted Nematic or Film Compensated Super Twisted Nematic glass with LED backlighting and a reflective, transflective, or transmissive display. View Additional Details Generic Part G-1926415C-VA Display Format 192 x 64 Graphic Display Module Size 100.0 x 60.0 x 12.0 Diagonal 3.30 Active Area 78.68 x 26.2 Pixel Pitch 0.410 x 0.410 Backlight…
3.30” 192 x 64 Graphic Display The G-1926419G-VA is a 3.30” 192 x 64 Monochrome LCD Display with a module size of 104.0 x 44.0 x 8.1 and an active area of 78.67 x 26.19. The G-1926419G-VA 192 x 64 display uses Super Twisted Nematic or Film Compensated Super Twisted Nematic glass with LED backlighting and a reflective, transflective, or transmissive display. View Additional Details Generic Part G-1926419G-VA Display Format 192 x 64 Graphic Display Module Size 104.0 x 44.0 x 8.1 Diagonal 3.30 Active Area 78.67 x 26.19 Pixel Pitch 0.410 x 0.410 Backlight…
3.30” 240 x 64 Graphic Display The G-2406407C-VA is a 3.30” 240 x 64 Monochrome LCD Display with a module size of 10.0 x 50.0 x 10.5 and an active area of 81.57 x 23.65. The G-2406407C-VA 240 x 64 display uses Super Twisted Nematic or Film Compensated Super Twisted Nematic glass with LED backlighting and a reflective, transflective, or transmissive display. View Additional Details Generic Part G-2406407C-VA Display Format 240 x 64 Graphic Display Module Size 100.0 x 50.0 x 10.5 Diagonal 3.30 Active Area 81.57 x 23.65 Pixel Pitch 0.340 x 0.370 Backlight…
3.40” 160 x 240 Graphic Display The G-16024001G-VA is a 3.40” 160 x 240 Monochrome LCD Display with a module size of 85.0 x 61.0 x 2.7 and an active area of 47.9 x 71.9. The G-16024001G-VA 160 x 240 display uses Super Twisted Nematic or Film Compensated Super Twisted Nematic glass with Electro Luminescent backlighting and a reflective, transflective, or transmissive display. View Additional Details Generic Part G-16024001G-VA Display Format 160 x 240 Graphic Display Module Size 85.0 x 61.0 x 2.7 Diagonal 3.40 Active Area 47.9 x 71.9 Pixel Pitch 0.300 x 0.300…
3.5 ” 340 x 240 Mono TFT Display The PDI-24032052G(R) is a small-size 3.5” Mono TFT with a 320 x 240 resolution. This product offers improved contrast, viewing angle, brightness and response time over traditional passive monochrome products. View Additional Details Part Number PDI-24032052G(R) Format 320 X 240 Module Size 58.56mm x 79.94mm x 1.6mm Active Area 53.28mm x 71.04mm Diagonal 3.5 Display Type Negative Transmissive Brightness N/A Touch Panel N/A 1.0 DIMENSIONAL DRAWING – FRONT PDI-24032052G(R) was last modified: May 21st, 2021 by kkyang
3.50” 128 x 128 Graphic Display The G-12812827C-VA is a 3.50” 128 x 128 Monochrome LCD Display with a module size of 86.0 x 95.0 x 10.0 and an active area of 62.69 x 62.69. The G-12812827C-VA 128 x 128 display uses Super Twisted Nematic or Film Compensated Super Twisted Nematic glass with LED backlighting and a reflective, transflective, or transmissive display. View Additional Details Generic Part G-12812827C-VA Display Format 128 x 128 Graphic Display Module Size 86.0 x 95.0 x 10.0 Diagonal 3.50 Active Area 62.69 x 62.69 Pixel Pitch 0.490 x 0.490 Backlight…
3.50” 240 x 160 Graphic Display The G-24016015T-VA is a 3.50” 240 x 160 Monochrome LCD Display with a module size of 95.0 x 67.0 x 2.8 and an active area of 74.38 x 49.58. The G-24016015T-VA 240 x 160 display uses Super Twisted Nematic or Film Compensated Super Twisted Nematic glass with no backlighting and a reflective, transflective, or transmissive display. View Additional Details Generic Part G-24016015T-VA Display Format 240 x 160 Graphic Display Module Size 95.0 x 67.0 x 2.8 Diagonal 3.50 Active Area 74.38 x 49.58 Pixel Pitch 0.310 x 0.310 Backlight No…
3.5″ 320 x 240 TFT COLOR LCD Phoenix Display International PDI035QVIH-28B is a small-size 3.5” color TFT liquid crystal display (LCD) with a module size of 76.75 x 63.7 x 3.27 mm and active area of 70.08 x 52.56 mm. This product is a-Si TFT, Positive, Transmissive glass with a 262K color 320 x 240 resolution. Its brightness is 350 nits with a contrast ratio of 300. Using an HX8238-D driver with a RGB interface and a Ziff style interconnect. This product offers improved contrast, color saturation and response time. Similar product(s): None. All our…
3.5″ 320 x RGB x 480 Transmissive Color TFT Display Phoenix Display International PDI035HVSI-31 is a small-size 3.5” color TFT liquid crystal display (LCD) with a module size of 54.48 * 84.71 * 2.3 mm, and active area 48.96 * 73.44 mm. This product is a-Si TFT, Normally White, Transmissive glass with a 320 * RGB * 480 resolution. Its brightness is 320 nits with a contrast ratio of 500. Using an ILI9488 driver with a 3SPI+RGS18-bit interface and a zero insertion force (ZIF) type flex interconnect. This product offers improved contrast , color saturation…
3.5″ 320 x (RGB) x 480 Transmissive Color TFT Display Phoenix Display International PDI035HVHI-48 is a small-size 3.5” color TFT liquid crystal display (LCD) with a module size of 53.76* 84.18 * 2.1 mm, and active area 48.96 * 73.44 mm. This product is a-Si TFT, Normally White, Transmissive glass with a 320 * RGB * 480 resolution. Its brightness is 350 nits with a contrast ratio of 800. Using a ILI9488 driver with a 3SPI+RGB18-bit interface and a zero insertion force (ZIF) type flex interconnect. This product offers improved contrast , color saturation and…
3.5″ 320 x (RGB) x 800 Bar Type TFT Color LCD Phoenix Display International PDI035WVBS-51 is a small-size bar type 3.5” color TFT liquid crystal display (LCD) with a module size of 40.97 * 94.4 * 2.78 mm, and active area 33.96 * 81 mm. This product is a-Si TFT, Normally White, Transmissive glass with a 340 * RGB * 800 resolution. Its brightness is 330 nits with a contrast ratio of 600. Using a ST7701S driver with a RGB interface and a zero insertion force (ZIF) type flex interconnect. This product offers improved contrast…
3.60” 240 x 128 Graphic Display The G-24012803T-VA is a 3.60” 240 x 128 Monochrome LCD Display with a module size of 94.1 x 58.5 x 3.0 and an active area of 81.57 x 40.93. The G-24012803T-VA 240 x 128 display uses Super Twisted Nematic or Film Compensated Super Twisted Nematic glass with no backlighting and a reflective, transflective, or transmissive display. View Additional Details Generic Part G-24012803T-VA Display Format 240 x 128 Graphic Display Module Size 94.1 x 58.5 x 3.0 Diagonal 3.60 Active Area 81.57 x 40.93 Pixel Pitch 0.340 x 0.320 Backlight…
The provided display driver example code is designed to work with Microchip, however it is generic enough to work with other micro-controllers. The code includes display reset sequence, initialization and example PutPixel() function. Keep the default values for all registers in the ILI9341, unless changed by the example code provided.
4-wire 8-bit Serial Data Interface II is the correct mode to use based on the microprocessor pins available. This mode is closest to standard SPI port operation with a few minor exceptions.
Note that the WR pin becomes the D/CX signal in serial mode. CS is used to initiate a data transfer by pulling it low. At the end of the data transfer, pull the CS pin high to complete the transaction. The timing diagram indicates that you can pull the CS pin high in between the command byte and data bytes within a transfer, but it is unlikely needed if the display is the only device on the SPI bus. To keep things simple, we suggest to leave it low during the entire transaction.
It is best to use PWM for backlight control. For prototyping, the LED backlight anode pin needs to be driven by a 5 Volt supply and each individual LED cathode needs a current limiting resistor. You can use a lower anode voltage than 5V, but you will need to calculate a new resistor value. The backlight LED voltage drop is about 3.2 Volts and varies with temperature.
Ms.Josey 
Ms.Josey