1602 lcd modules with serial pricelist

"Your time is limited, so don"t waste it living someone else"s life. Don"t be trapped by dogma – which is living with the results of other people"s thinking."

ERMC1602SYG-1 is big 16 characters wide,2 rows character lcd module,SPLC780C controller (Industry-standard HD44780 compatible controller),6800 4/8-bit parallel interface,single led backlight with yellow green color included can be dimmed easily with a resistor or PWM,stn-lcd positive,dark blue text on the yellow green color,wide operating temperature range,rohs compliant,built in character set supports English/Japanese text, see the SPLC780C datasheet for the full character set. It"s optional for pin header connection,5V or 3.3V power supply and I2C adapter board for arduino.

Of course, we wouldn"t just leave you with a datasheet and a "good luck!".For 8051 microcontroller user,we prepared the detailed tutorial such as interfacing, demo code and Development Kit at the bottom of this page.

This serial LCD kit includes a 16x2 LCD together with a small "serial interface" PCB fitted with a PICAXE-18M2 chip. The on-board PICAXE-18M2 chip is provided pre-programmed with the open-source AXE133 firmware, which allows this on-board 18M2 chip to act as a "slave" serial driver for the LCD display. This allows your main project to display text on the serial LCD via simple serout commands, such as

Unlike other "Serial Display" which just convert serial input to parallel, Digole"s Serial displays and adapters embedded a powerful MCU to process the commands received. Display characters and control back light as you want, all commands are simple, high level and easy to remember!

In order to use a Text LCD display, you need connect at least 4 data pins and 2 control pins from your circuit to display, and you also need to spend some time to write code to drive it, in some case, you may need couple of days to deal with it, and it will give you a nightmare when changing to other display.

This control module (adapter) will help you to solve this issue, it can work with most 1602/1604/2002/2004/4002 LCD that config with KS0066U/F / HD44780 and other compatible chips seamlessly, so you can use your display with this module in couple of minutes!(Please ask if you not sure whether or not your LCD is compatible with the adapter)

CLear screen and set the display position to first Column and first Row (x=0.y=0), for graphic LCD, it also set the font to default and turn off the cursor.

Display Config on/off, the factory default set is on, so, when the module is powered up, it will display current communication mode on LCD, after you design finished, you can turn it off

The CFA533-***-KC series is a 16x2 I2C LCD with keypad. The I2C interface allows you to use just two lines (SDA & SCL) to have bi-directional communication with the I2C LCD. Other devices can also share those two I2C control lines with the LCD. Only 4 wires are needed to connect this I2C LCD: power, ground, SDA (I2C Serial DAta) and SCL (I2C Serial CLock).

The CFA533 can run on 3.3v to 5.0v directly, with no changes needed, so you do not need to do any level translation between your embedded processor and the I2C LCD. Simply power the CFA533 from the same supply as your processor and the I2C signal levels will match up.

Using only one address on your I2C bus, you can add all the elements that you need for your front panel. The CFA533 I2C LCD can also read up to 32 DS18B20 digital temperature sensors, giving you an easy way to integrate temperature sensing over the I2C bus. No additional firmware or pins are needed on the host system.

This CFA533-TFH variant features crisp dark letters against a white, backlit background. The keypad has a matching white LED backlight. Since the LCD is a backlit positive FSTN, the CFA533-TFH I2C LCD is readable in direct sunlight, as well as complete darkness.

This is I2C interface 16×2 LCD display module, a high-quality 2 line 16 character LCD module with on-board contrast control adjustment, backlight and I2C communication interface. For Arduino beginners, no more cumbersome and complex LCD driver circuit connection. The real significance advantages of this I2C Serial LCD module will simplify the circuit connection, save some I/O pins on Arduino board, simplified firmware development with widely available Arduino library.

Hot Tags: lcd1602 hd44780 character lcd /w iic/i2c serial interface adapter module for lcd16*2 suppliers China, manufacturers, low price, buy discount, pricelist, price, made in China

Unlike other "Serial Display" which just convert serial input to parallel, Digole"s Serial displays and adapters embedded a powerful MCU to process the commands received. Display characters and control back light as you want, all commands are simple, high level and easy to remember!

In order to use a Text LCD display, you need connect at least 4 data pins and 2 control pins from your circuit to display, and you also need to spend some time to write code to drive it, in some case, you may need couple of days to deal with it, and it will give you a nightmare when changing to other display.

This control module (adapter) will help you to solve this issue, it can work with most 1602/1604/2002/2004/4002 LCD that config with KS0066U/F / HD44780 and other compatible chips seamlessly, so you can use your display with this module in couple of minutes!(Please ask if you not sure whether or not your LCD is compatible with the adapter)

CLear screen and set the display position to first Column and first Row (x=0.y=0), for graphic LCD, it also set the font to default and turn off the cursor.

Display Config on/off, the factory default set is on, so, when the module is powered up, it will display current communication mode on LCD, after you design finished, you can turn it off

This is an IIC Serial 1602 LCD module. With this I2C interface LCD module, you will be able to realize data display via only 2 wires. If you already have I2C devices in your project, this LCD module actually cost no more resources at all. It is fantastic for Arduino based project.