clean lcd screen isopropyl alcohol manufacturer

If you have been wondering how to clean a monitor with isopropyl alcohol, then let me tell you that the answer is very simple. All you need is a lint-free cloth and a container filled with 99% pure isopropyl alcohol. To start, dip your cloth in the container of alcohol and wipe away grime from your screen without applying too much pressure. After cleaning, let the monitor dry completely before turning it on again.

Use a soft, lint-free cloth. Avoid paper towels or anything else that might contain fibers. If you"re concerned about your monitor"s finish, you should be especially careful when cleaning it with alcohol—so don"t use any kind of rag or cloth you"ve already used on something else. If you"re concerned about dust or other contaminants on the monitor itself, then go ahead and use a small piece of tape to pick up excess dust before cleaning the screen with isopropyl alcohol.

A damp cloth is best for cleaning the monitor"s screen. This will prevent you from scratching it with a dry cloth or paper towel, which could damage your screen and make it harder to see.

Use a lint-free cloth. You don"t want to leave behind any debris, so you want to avoid using paper towels or other cloths that have fibers that could stick to your screen.

Use only enough isopropyl alcohol to clean off the dust and dirt from your monitor. Overapplying the cleaning solution will cause it to evaporate too quickly and leave residue on your screen, as well as potentially damaging it if there"s too much moisture in the air.

The next step after this is drying off any excess liquid: if there is any left over after patting down with one dry portion of cloth material, use another clean section again but be careful not overdo it here so as not spill water into places where they should not go!

Let the alcohol dry completely before turning on the monitor. If you do not, it could damage your monitor and void your warranty. Allow at least five minutes for a regular monitor, and overnight for laptops—the liquid will evaporate faster in warmer weather than in colder.

If you are looking for a way to clean your monitor, then consider using isopropyl alcohol. Isopropyl alcohol is a common solvent used in the medical and pharmaceutical industries, as well as one of the most effective disinfectants around. You can find it at your local drug store or supermarket, usually labeled “rubbing alcohol” or “isopropyl rubbing alcohol”.

Isopropyl alcohol is also very safe to use on monitors because they do not contain any oil or other contaminants that can be removed by detergents such as soap. Another benefit of this cleaner is that it will remove fingerprints without leaving any residue behind (unlike commercial cleaners).

Cleaning your monitor with isopropyl alcohol is a simple way to keep it looking good. It’s also cheap and easy to do, so there’s no reason not to try it. The alcohol will remove dust and fingerprints from both LCD and CRT monitors, leaving them looking like new again!

Screens, especially touchscreens, collect a lot of dirt, grease and hair. This means that periodic cleaning is something we all have to and should do.

Now, plenty of people get away with wiping a smartphone screen against their t-shirt or pants or using a sleeve to clean a laptop display, but this is not the best way and can itself damage the display.

Do a quick search on the internet, and you"ll find that isopropyl alcohol is the weapon of choice in cleaning displays. This is true, but if used incorrectly, this chemical can also damage the display.

The big DON"T of using isopropyl alcohol is this -- don"t pour or even spray isopropyl alcohol on your display. If you put too much isopropyl alcohol on a screen, damage can occur in two ways:The isopropyl alcohol can seep between the layers of the display, completely ruining it and requiring the device to have a replacement screen fitted

Apple has, naturally, published detailed information on safely cleaning a whole range of products, from notebooks to tablets to smartphones. While this is aimed at Apple users, the information applies to other brands too.

It is always best to follow manufacturer’s suggestions for product care, but generally it is safe to clean an LCD screen using a very soft, 100% cotton cloth, and a mixture of distilled water and clear vinegar. If you prefer buying ready-made products, LCD cleaners are available from electronics shops in spray bottles.

While it might be tempting to use an old tee shirt for a cotton cloth, the seams can potentially scratch the screen. Flannel is the recommended material, and you can visit a fabric shop and buy a yard (0.9 meters) of 100% untreated cotton flannel for very little money. By purchasing this amount of fabric, you’ll be able to cut new cloths when the old one gets dirty. Microfiber cloth is also a good choice.

While many people use isopropyl alcohol in a 50/50 solution with distilled water, some manufacturers warn against this. If you are inclined to use isopropyl rather than vinegar, check with the manufacturer’s website of your LCD product to be sure this is acceptable. Many store-bought LCD cleaners contain isopropyl, and it is generally considered safe and effective.

Otherwise, a 50/50 solution of distilled water and white vinegar can be combined in a spray bottle. Avoid using a bottle that had previous cleaners or agents in it — a new spray bottle can be purchased at the grocery store. Choose a sprayer that is capable of a fine mist.

Cut a piece of cloth large enough to fold into a nice square pad that is a few layers thick. Spray your 50/50 solution on to the surface of the cloth, lightly dampening it. Be sure the cloth isn"t so wet that it will drip down the screen. Do not spray the solution directly on to the LCD screen.

Before you clean an LCD screen, power it off to avoid potential damage. Take your cloth and gently wipe the surface from top to bottom, moving downward in a straight line. When you reach the bottom lift the cloth away and place it at the top again to proceed. Use a very light touch, as pressing against the screen could damage its pixels.

Do not move the cloth in a circular motion to rub out fingerprints or smudges. The solution will do the trick. If you have to cover an area twice, wait until its dry, then repeat the process. The vinegar should cut through any dirt or body oils deposited on the screen. By following this simple procedure, your screen should stay clear and unblemished.

Never use paper towels, napkins, or tissues to clean an LCD screen. These materials will either scratch the screen or leave debris. Household cleaners and ammonia should also be avoided, as they can leave a white cast, ruining the screen’s finish.

Q: I have a new LCD television, and I"m not sure how to clean it. With my old tube set, I just spritzed it with Windex, but the surface of my new TV isn"t glass.

A: "We recommend using LCD cleanser that can be purchased at any electronics store," says a customer service tech for Westinghouse, a manufacturer of popular LCD televisions. The cleaner can be found in both spray and wipe form. But what exactly goes into these LCD solutions?

Kai Hui of MG Chemicals, makers of one of many available LCD cleaners, explains, "The main ingredient in most wipes on the market is water. There needs to be a small percentage of isopropyl alcohol (IPA) to help get rid of the grease from busy fingers." Some LCD cleaning solutions may include up to 50 percent IPA, according to Hui, but any more than that could damage the screens.

Since I"d never suggest you spend more money than you have to, I"d start with a clean, soft cloth and regular ol" tap water. You can add just a capful of isopropyl alcohol to a glass of water if you need something to help loosen the greasy gunk on the screen, so it can wipe off more easily. Get the cloth damp and then apply to the screen instead of splashing the screen and trying to wipe up the liquid; and always -- always -- use a clean cloth, as tiny, hard particles trapped in the fibers can scratch the surface of your screen.

Like the OP, I"ve always used a 50/50 mixture of isopropyl alcohol and distilled water. Just now, I seem to have damaged the screen of my (Late 2013) MacBook Pro Retina by cleaning it with this mixture and a microfibre cloth.

There is a coating on the screen that has rubbed off in a patch about a quarter inch wide and two inches long. It"s very noticeable, but luckily it"s on the bezel rather than the screen proper. I"ll probably live with it, as a repair would probably involve replacing the whole screen. ($$$$)

This was possibly the third or fourth time that I"ve used this mixture to clean this screen in the few months that I"ve owned this machine. It"s really annoying to find that the most expensive laptop I"ve ever bought has a screen that can be so easily damaged, using a cleaner that I"ve seen recommended lots of times on the web and which has worked well for me in the past.

70% IPA is the most compatible formulation for sensitive touch screen equipment in healthcare. It is the most referenced formula in equipment manufacturer’s instructions for use. PDI has performed extensive compatibility work on touch screen materials and equipment to confirm compatibility. Easy Screen wipes are compatible with polycarbonate, glass, aluminum silicate, acrylic, stainless steel and more!

[Cleaning the screen of your mobile device with a wipe containing alcohol may reduce the lifespan of any anti-fingerprint coating. Please check your device manufacturer’s cleaning instructions.]

It is recommended that all high-touch surfaces be routinely cleaned and disinfected between uses, or anytime they become visibly soiled. The use of PDI’s Sani-Cloth® brand disinfecting wipes are generally safe on computer keyboards and mice, however they are not intended for use on touchscreen monitors. PDI’s Easy Screen® Cleaning Wipe was specifically developed for use on touchscreen equipment, and PDI performed extensive testing on touchscreen materials to confirm compatibility. Its 70% IPA formula is the most referenced formula in equipment manufacturer’s instructions for use. Easy Screen wipes are also compatible with polycarbonate, glass, aluminum silicate, acrylic, stainless steel and more!

[Cleaning the screen of your mobile device with a wipe containing alcohol may reduce the lifespan of any anti-fingerprint coating. Please check your device manufacturer’s cleaning instructions.]

Sani-Cloth, Sani-Prime and Easy Screen products DO NOT carry California Proposition 65 Warning. Proposition 65, officially known as the Safe Drinking Water and Toxic Enforcement Act of 1986, requires the state to maintain and update a list of chemicals known to the state to cause cancer or reproductive toxicity.

We"ve all had that moment: You"re sitting at your computer or laptop and the light hits your screen in a way to reveal an unsightly accumulation of streaks, fingerprints, and dust.

To help, we round up the most important things to know about cleaning your computer screen, whether it"s a Mac or PC. While it"s a simple process, there are a few important rules to keep in mind to make sure you"re doing it safely.

Computer screens are not all made the same, and thus can"t all be cleaned the same way. You"ll want to be careful no matter your screen type, but it"s helpful to know that displays come in two categories:Glass-coated screens: The screens on newer iMac displays and MacBooks have a glass overlay. Glass displays are a little less delicate than LCD or LED screens, and mild cleaning solutions, like rubbing alcohol, are generally safe to use on them.

LCD or LED screens:Windows computers and most touchscreens and matte displays are typically not coated in glass. Extra care should be taken with these screens so not to damage the pixels that make up the display.

To clean a computer screen, you really just need two things: A microfiber cloth and filtered or distilled water. That"s to say you don"t need a special store-bought cleaning solution.

If you"d like some extra sanitation power, an equal parts mixture of water and vinegar is safe no matter your screen type. If you know that your display is glass-coated, you can also use an equal parts mixture of water and 70% rubbing alcohol.What you needTwo lint-free microfiber cloths

d3sign/Getty ImagesTurn the computer or laptop off.For safety reasons, begin by letting the device cool down completely. Dust, fingerprints, and smudges are also easier to spot on a black screen.

If any marks remain, wipe with a lightly moistened cloth.For glass-coated screens, you can use a mixture of equal parts water and vinegar or rubbing alcohol. For LED or LCD screens, use only water. Spray or lightly dab the solution directly onto the cloth and carefully wipe the screen from left to right.

Buff with a dry cloth and air-dry.If any streaks remain once the screen dries, gently buff them with the dry cloth. Before you turn your computer or laptop back on, allow the screen to dry completely.Note:Apple claims that you can use 70% isopropyl disinfecting wipes to clean any Apple product. Just remember not to get any liquid into the device"s ports or openings — to avoid this, you might want to wring out the wipe to remove any excess liquid before using it.

For the best advice for cleaning your screen, it"s a smart idea to check your owner"s manual, which provides the manufacturer"s specific recommendations. But since screens are especially susceptible to damage, there are a few general guidelines that apply, no matter the type of screen you own.

Turn off your computer before cleaning the screen. This is just safe practice where any amount of liquid is involved, but more specifically, any static on the screen could create a shock and damage the internal components.

Do not use abrasive cleaning solutions. This includes bleach (or any products containing bleach), hydrogen peroxide, or all-purpose spray cleaners. Using an abrasive cleaner can ruin the finish of your screen.

Use filtered or distilled water. Especially in areas with hard water, water containing minerals like calcium and magnesium can damage your screen or leave even more streaks.

Use only soft microfiber cloths.Even a fabric as soft as a cotton shirt has snags and uneven particles that can scratch a computer screen. For this reason, avoid T-shirts, towels, and paper towels. The exception is the Apple Pro Display XDR or iMac, which requires a special polishing cloth.

Never spray cleaning solution directly onto the screen. To avoid any risk of damage from excess moisture, mist the solution directly onto the microfiber cloth instead.

Do not wipe in circles. Wiping in circles can create uneven pressure and ultimately lead to screen damage. It"s also more likely to create streaking. Wipe in tight, Z-shaped motions, or in broad strokes from side to side.

Do not scrub.Apply gentle pressure only. Hard scrubbing can damage the internal components of the screen and could leave scratches or spots of discoloration or dead pixels that won"t go away.Melanie Weir

Melanie Weir is a freelance author for Insider, mainly focusing on the Tech Reference section, but occasionally contributing to Lifestyle and Entertainment topics as well. She is also a freelance writer for ScreenRant, and is the Lead Weekend News Editor at TheThings.com. In her spare time she writes plays for both stage and screen. She can be reached at melanie.weir1008@gmail.com, or through LinkedIn.

Coronavirus has brought proper disinfecting practices into the spotlight. But keeping high-touch surfaces like your laptop, keyboard, and mouse clean and disinfected is a good practice all year round.

Don’t think cleaning your computer is important? Think again. Your keyboard alone could be hosting more bacteria than a toilet seat – 400 times more, in fact.

While you should always check your computer manufacturer’s specific cleaning and disinfecting directions, in general, these tips will help you keep your PC and laptop surfaces germ-free.

DON’T spray a cleaning agent directly on your computer’s surface. Spray your cleaner onto a cloth first and then gently wipe the cloth over the surface.

Dip your microfiber cloth (or a large cotton swab) into your rubbing alcohol. Wring it out to prevent drips. Gently wipe down your keyboard with the alcohol and allow it to air dry.

The same instructions apply for laptop touchpads. Simply turn off your laptop and swipe a clean microfiber cloth dampened with rubbing alcohol across the touchpad, and let it air dry.

I can"t believe I was fooled into buying this "screen cleaner". It is literally just 70% isopropyl alcohol in a plastic spray bottle. You can buy a 16oz bottle of 70% isopropyl alcohol at Walmart for under $1.50.

They say: "Our formula contains 70% Isopropyl Alcohol for maximum protection". Yes and smells exactly like alcohol. They do show two inactive ingredients: water, 2-butoxyethanol. Guess what 2-butoxyethanol does? It is used as a solvent for resins, lacquers, varnishes, and enamels and can "harm" workers exposed to it.

So I paid over $17 for a spray bottle of alcohol, water and solvent. Oh and don"t forget the "special" cloth it comes with. I am sure you have several just like it already at home.

No matter where LCD screens are kept, they will always need cleaning from time to time. Cleaning an LCD may seem like a daunting task, but there are a few simple ways to clean it without damaging to scratching to surface.

There are many cleaning solutions available in shops. However these may seem a bit expensive and are sometimes quite unnecessary. PixelClean is one of the better and less expensive brands. It is highly recommended. Most products will come with instructions on how to use them.

It is recommended to use a simple alcohol solution to clean an LCD screen. This solution is made up of part distilled water and part 50% isopropyl alcohol. Be warned that isopropyl alcohol is flammable.

50% isopropyl alcohol is very common. If you find 70%, 91%, or 99% isopropyl alcohol, adjust the formula to use less alcohol and more distilled water.

The reason you want this mixture is because alcohol evaporates so quickly. More importantly, it doesn’t leave any residue behind, so the screen will be cleaned without there being any streaks or marks left. You can buy this at your local pharmacy–it’s used for cleaning wounds.

Do NOT use tissues/Kleenex to wipe your screen. That is ineffective, because they will leave little tissue particles all over your screen. You want a 100%-cotton cloth that is soft and absorbent. A t-shirt is a good cloth, but so is a sock or a Turkish towel, so long as it is 100% cotton.

Stay away from cloth that has polyester in it because this can contain stiff filaments. These filaments can scratch the screen while you are rubbing over it. Also stay away from paper towel and tissues. While it might feel soft, remember that it is paper and therefore, it comes from wood. This means that there might be microscopic wood fragments in the paper towel that will scratch your screen if you move it over it. Therefore, avoid anything paper and instead, focus on the cotton.

First dampen the cloth with the alcohol solution. You should never spray any sort of liquid directly onto the screen. You also don’t want to try and clean the screen without some sort of liquid because the dust particle, as it is moved across the screen, will scratch.

Wipe the screen gently from top to bottom or in a counter clockwise direction, and wait for it to dry. You’ll remove all of the dust and the liquid that is on the screen will evaporate quickly. Then, the screen will be clean and scratch free.

Be careful not to let the cleaning solution leak into the sides of the monitor. Also, be certain that you do not press hard on the LCD screen. You can permanently damage an LCD screen by pressing on it too hard.

If there is just dust on your screen, there is no need to fully clean it. To remove dust all that must be done is to wipe it away with a microfiber cloth. Simply wipe your screen from end to end gently with the cloth.

We’ve talked before about how the pandemic has shown some serious strain on our global supply chains. Once upon a time it came for isopropyl alcohol. While IPA may not be hard to find, ortriple the usual cost, we’ve still got the details, and alternatives, right here for you.

We know, rely on, and recommend isopropyl alcohol (a.k.a. isopropanol, or IPA) for many of our techniques and guides. It’s pretty simple stuff, but it is sold in different ways, and recommended for a myriad of uses.

Understandably, people have questions. Is “rubbing alcohol” or “surgical spirit” the same thing? What percentage of isopropyl do I need for electronics work or disinfecting? Can I use anything else on my electronics? And, hey, is this stuff going to catch on fire if I cause a spark?

Isopropyl alcohol is a clear chemical that is flammable. It smells a bit like vodka or other spirits, just without any kind of scent other than alcohol. Manufacturers make it by adding water to propene (itself steamed and heated out of propane and other hydrocarbons), then distilling the mixture to a desired strength, similar to how liquor is made.

It’s usually sold in a few set percentages of alcohol-to-water: 70% and 90/91% are most common, but you’ll sometimes see 60% or, at hardware and specialty supply stores, 95-99%.

It’s best to avoid using any isopropyl mixture below 90% on circuit boards and other electrical bits. If you’re simply cleaning the adhesive off something metal or plastic, 70% might do in a pinch, but you’ll want to be sure not to spill it onto circuits or wires. There’s enough water in that lower-grade stuff that it will take longer to evaporate, and may leave behind trace impurities from the water when you’re finished.

We suggest you stick to something you know and has known ingredients: isopropyl alcohol and water. Rubbing alcohol, denatured alcohol, surgical spirits, and other high-alcohol solutions often contain other chemicals, scents, or other substances that have different properties than IPA, or are a bad idea around boards and wires. If the package doesn’t have isopropyl alcohol as the only active ingredient, and water as the only inactive, it might be best to hold out.

This is especially true for nail polish remover, or acetone. Acetone is a stronger adhesive remover than isopropyl alcohol, at least for the kinds of adhesives often used in electronics. But acetone also damages ABS plastics, the most common in electronics. That’s why we include just a little acetone in our adhesive remover, to make it even more effective, but not so much that it will melt plastics, presuming you wipe it up fairly quickly.

You’re better off saving that for large batches of party punch, given the cost. Ethanol/ethyl alcohol is not the same thing as isopropyl alcohol, either.

We’ll only tell you to use isopropyl alcohol on surfaces where it’s safe to do so in our guides. And we try to warn you when spills or an abundance of liquid can cause damage. In our guide to replacing the battery in a 2013 15-inch MacBook Pro, we note that our own adhesive remover (the majority of which is isopropanol, but also a small amount of acetone) can damage the anti-glare coating on your display, and the plastic on the embedded speakers.

Generally, metal and circuit boards don’t have a problem with adhesive remover, but you should be cautious around display components (especially the LCD or OLED backing behind a screen), plastics, and, obviously, anything that is glued together that you want to stay glued together. Generally, a cautious approach is best; even better is a little pre-fix research. Electronics cleaning vendor Techspray has a material-by-material list of what reacts to isopropyl alcohol. If you’re not sure, don’t put a bunch of alcohol on it (a good general rule for life, you might find).

We recommend isopropyl alcohol as one of the steps to cleaning out your keyboard. But note that we recommend a damp towel, not pouring the stuff straight on.

Many device makers are clarifying what is safe to wipe with sanitizing solutions. Microsoft says you can clean the felt-like Alcantara cloth on its Surface products with a 70% alcohol solution. Apple used to suggest that you had to be really careful around its screens to avoid removing the oleophobic coating, but now using a 70% solution is at the top of the official “Cleaning your iPhone” page. Searching for cleaning or maintenance instructions for your device is a good place to start.

Nearly every iFixit guide is built around getting to the battery and disconnecting it before you do any work that would put you in contact with electrical circuits. Once the battery is disconnected (or you’ve unplugged the device, if it lacks a battery), your chance of accidentally creating a spark, or exposing isopropyl to heat, is much reduced. Electrostatic discharge from your clothing or rugs is quite unlikely to cause a fire, but it’s always a good idea to avoid it. The main thing you want to look for, then, is larger capacitors in bigger devices, which can store a charge even after disconnection from power. For most repairs, this isn’t an issue.

Regardless of the use, you should treat isopropyl alcohol like any other flammable substance with strong vapors in your house. Don’t expose it to flame or high heat or sparks. Keep it tightly closed when not in use (this also prevents wasteful evaporation). And don’t use it in enclosed spaces with poor ventilation.

A big thanks to Old Turkey, Mayer, and other iFixit Answers VIPs who laid out a lot of this knowledge. Got any more questions about isopropyl alcohol, or anything else repair-related? You can help us decide what to tackle next. Ask us in the comments, or tag us on social media with #AskiFixit.

If any marks remain, moisten the cloth with LCD cleaner, and then gently stroke the cloth across the display in one direction, moving from the top of the display to the bottom.

Notice: Do not use any of the following chemicals or any solutions that contain them: acetone, ethyl alcohol, toluene, ethyl acid, ammonia, or methyl chloride. If you have a different chemical or solution and are not sure whether it is suitable, do not use it. Using any of the chemicals in the previous list may cause permanent damage to the LCD screen. Some commercial window cleaners contain ammonia and are, therefore, unacceptable.

Note: Many cleaning solutions are sold specifically as LCD cleaners. You can use these to clean LCD screens on Dell laptops. Alternately, you may use a 50/50 isopropyl alcohol and water mixture. Microfiber cloths such as those used to clean eyeglasses are excellent for use with LCDs.

Please visit the support page for your manufacturer to find out how to clean your LCD. The support pages for some manufacturers are listed on the Checking Warranty page.

Isopropyl Alcohol is commonly found as rubbing alcohol in the grocery store, usually in a 70% isopropyl alcohol 30% distilled water mix; there is no need to dilute it when it comes that way. Some stores may sell 100% isopropyl alcohol which should be diluted. Something about the 70/30 mix causes the alcohol to evaporate away in the most efficient manner, so it"s better to do that than a 50/50 mix.

Isopropyl alcohol should be used only when distilled water won"t do the job, because repeated applications can eventually damage more delicate finishes.

Solutions that eyeglasses stores sell to clean glasses should certainly be safe for monitors, for finishes on glasses can be even more delicate. They are a good place to find the microfiber cloths which really are the best material for the job.

Windex and other ammonia-based cleaners should never be used; they WILL ruin your monitor, staining the finish a yellow color that can"t ever be removed.

Remember when your LCD or OLED display had that brand-new, fresh-out-of-the-box shine, feel and look? You are in the right place if your display is now due for deep cleaning.

Things to consider before cleaning or handling an electronic displayAvoid static by grounding your body and following proper ESD-safe handling techniques.

A microfiber cloth and distilled water is recommended for cleaning the display glass. Use Qtips and Isopropyl alcohol for cleaning the printed circuit board.

Although distilled water is recommended for wiping the display glass, you can use a cleanser developed explicitly for cleaning displays. However, do not spray it directly onto the display. Spray a tiny amount of the cleaner onto a microfiber cloth first to avoid getting any cleaning solution inside the display.Never spray any liquids directly onto the display.A spray is too hard to control and confine. The fluids can seep into the other display layers or surrounding components and cause irreversible liquid damage.

Only use a microfiber cloth and don"t use chemicals to clean a resistive touchscreen.Disconnect the display from the power supply and remove any screen protectors or liners.

Isopropyl alcohol (IPA) is widely used to clean printed circuit boards (PCBs). Use a Q-tip or soft small bristle brush for scrubbing a PCB, and never use a paintbrush.Gently rub a Q-tip in Isopropyl alcohol.

Cleaning soldering residue on LCD with Isopropyl alcohol and a Q-Tip.Cleaning residue around soldering elements is not necessary if Newhaven Display performed the soldering.

Cleaning your electronic display is a simple task. However, it is essential to consider these steps to handle and clean it properly. You should now have a better understanding of what cleaning products are safe to use, how to clean the display screen glass, how to clean touchscreens and how to clean soldering residue.

But keeping your laptop clean can be intimidating. After all, you’re putting chemicals to a £1000+ piece of kit. And, how often do you need to clean it?Trusted Reviews has gathered all the info you need on how to clean your laptop safely and effectively.

“Follow manufacturer’s instruction for cleaning and disinfecting. If no guidance, use alcohol-based wipes or sprays containing at least 70% alcohol. Dry surface thoroughly.”

Most companies advise you clean your laptop on a regular basis to help keep germs and dust at bay. It is especially important that you keep an eye out for dust as allowing this to build up over time can actually slow down your laptop in the long run.

You’ll want to avoid using anything harsh – such as glass cleaner – on your laptop display. HP advises not to use rubbing alcohol to clean an LCD screen as this can damage your display. It is always best to consult your manufacturer or manual for a list of products to use or avoid before you get started cleaning your device.