alcohol damage lcd screen supplier

Screens, especially touchscreens, collect a lot of dirt, grease and hair. This means that periodic cleaning is something we all have to and should do.

Now, plenty of people get away with wiping a smartphone screen against their t-shirt or pants or using a sleeve to clean a laptop display, but this is not the best way and can itself damage the display.

Do a quick search on the internet, and you"ll find that isopropyl alcohol is the weapon of choice in cleaning displays. This is true, but if used incorrectly, this chemical can also damage the display.

The big DON"T of using isopropyl alcohol is this -- don"t pour or even spray isopropyl alcohol on your display. If you put too much isopropyl alcohol on a screen, damage can occur in two ways:The isopropyl alcohol can seep between the layers of the display, completely ruining it and requiring the device to have a replacement screen fitted

One of the most common questions I am asked, now that LCDs are in wide use, is how to clean one.  Every manufacturer has their recommended method.  What Envision recommends will ruin an NEC LCD and void your warranty.  As you will be able to tell, every LCD needs to be cleaned in a different way.

Another thing I learned from finding all this information is that every manufacturer has the same warning: Never touch or press on the LCD screen with your fingers – NEVER!!!  Doing so can cause the pixels to short out and die.  Then you will have blank spots on your LCD.

I called CTX tech support and was told the way to clean their LCDs was in the Technical Glossary and General FAQ.  I asked the guy to check that out and he said he couldn’t find it either.  He said to use very mild soap, tepid or lukewarm water, and a just slightly moist lint-free cloth.  This is supposed to be added to their General FAQ.

Discussion: A common cause for marks on the LCD is oil and dirt deposited on the keys of the keyboard that can get pressed against the LCD when carried in a carrying case or when pressure is applied to the lid.

There are many cleaners sold specifically as LCD cleaners. These are perfectly acceptable for cleaning LCDs on Dell notebooks.  If you do not wish to purchase one of these products designated specifically as an LCD cleanser, the following is a list of what is and is not acceptable for cleaning your LCD.

These cleaners might cause permanent damage to the LCD due to a chemical reaction. Some commercial window cleaners contain ammonia and are generally unacceptable.

Clean the computer’s built-in LCD display with a soft, clean cloth and one of the cleaners listed above or a commercial window cleaner that does not contain ammonia, wax, or abrasives. Apply the cleaner to the cloth, and then stroke the cloth across the display in one direction, moving from the top of the display to the bottom. If the display contains grease or some other contaminant, use a cloth with an acceptable cleaner listed above instead of a commercial window cleaner.

A. You can use Windex® to clean the screen and 409® clean the outer casing of the monitor. Please use a “soft” non-fibrous cloth to clean the screen. Do not use any paper products to clean the screen.

Shut down and unplug the computer and clean the LCD screen with a soft cloth moistened only with water. Wet the cloth, wipe the display, and then dry the screen with another soft cloth.

Gently dust the screen with a dry, soft, lint-free cloth. If the screen is still dirty, you can dampen the cloth with several drops of distilled water.  Make sure the LCD panel is completely dry before you turn the display back on.[/box]

Soak a soft gauze cloth with isopropyl alcohol or ethyl alcohol diluted with water (1:1) and gently wipe the surface of the monitor. Do not dust it or wipe it with a cloth dampened with pure water.

CAUTION: Never use pure water to clean the LCD screen. Do not use cleaning solutions containing fluoride, acids, or alkalis. Do not use ketone substances such as acetone or solvents such as xylene or toluene to clean the monitor. Do not use benzene, thinner, ammonia, or any volatile substance to clean the monitor’s screen or cabinet. These chemicals may damage the monitor.

This is the strangest one ever.  On March 21, 2003, I e-mailed every e-mail address I could find on Hyundai’s web sites.  I guess I threw them for a loop because I received a phone call from a Peter at AVC Tech USA.  That must be Hyundai’s USA distributor.  Peter told me that Hyundai has NO written instructions for cleaning their LCDs.  Quoting Peter this is what he told me to do: “use alcohol and soft cotton cloth and don’t run too hard”.

The display area is highly prone to scratching.  Do not use ketone-type cleaners (i.e. acetone), ethyl alcohol, toluene, ethyl acid or methyl chloride to clean the panel.  Doing so may result in permanent damage.

You can use regular Windex, just do not spray directly to monitor screen, spray to a soft rag or cloth and then wipe out gently, any other question please let us know and thank you for your time.

CAUTION: Do not use benzene or thinner or rubbing alcohol.  Doing so may adversely affect the surface, e.g. discoloration.  In addition, do not use commercially-available cleaners and cosmetics as they may contain components harmful to the surface.

Unplug the monitor, if you need to clean it with a slightly damp cloth. Wiping the screen with a dry cloth is possible when the power is off. However, never use alcohol, solvents, or ammonia-based liquids.

A: For normal cleaning, use the clean, soft, and fine. For extensive cleaning, please use Isopropyl alcohol. Do not use other solvents such as ethyl alcohol, ethanol, acetone, hexane, etc.

If still not clean, apply a small amount of non-ammonia, non-alcohol based glass cleaner onto a clean, soft, lint-free cloth, and wipe the screen with only slight pressure. Too much pressure may damage the screen.

If still not clean, apply a small amount of a non-ammonia, non-alcohol based, mild non-abrasive detergent onto a clean, soft, lint-free cloth, then wipe the surface.

A: We recommend that you use a cleaner specifically designed for electronic equipment to clean the case and, if necessary, a separate cleaner specifically designed for cleaning LCD Panels. This should be used in conjunction with a soft, lint-free cloth.

A: Any cleaning solution should be applied to the cloth. Under no circumstances should you spray the cleaner directly onto the machine. The excess cleaner may find its way into sensitive areas of the machine and can cause severe damage.

A: In general, the answer to this question is yes. Most cleaners that are satisfactory for cleaning the case of your WinBook are not satisfactory for cleaning the LCD panel. You should look for a cleaner that is specifically designed and labeled for cleaning LCD screens.

A: You SHOULD NOT use any sort of harsh solvents to clean your WinBook. This includes fingernail polish remover, alcohol, turpentine, gasoline, lighter fluid, acetone, paint thinner, mineral spirits, kerosene, ammonia, dishwashing soap, glass cleaner, vinegar, or any other commonly found household cleaner.

LCD Displays are interfaces of human and machine. They expose to various environments, especially now that COVID-19 spreading around the world. So it"s impossible to keep a screen clean all the time. When you are going to clean an LCD display，do you have the right steps in mind？Maybe what you"ve been doing is not right！

LCD screens could have different top layers. For example, there are glass, plastic, coating, or protective bezels. Each one of them is different. Therefore, each type of screen should not be cleaned in only one way. In fact, the most appropriate way is written in product manual. Take Topway HMT070ETD-1D, a 7 inch Smart TFT LCD Display with capacitive touch screen, as an example. Cleaning precautions are as follow: Only clean LCD with a soft dry cloth. Isopropyl Alcohol or Ethyl Alcohol. Other solutions(e. g. water) may damage the LCD.

LCD screens are fragile. Before cleaning an LCD display, you should turn it off completely, disconnect it from power supply,  and let it cool down for a few minutes. This will eliminate danger of electrocution and make it easier to see dust on screen.

Don’t press down hard while cleaning, because that action may damage top layers or coating. Spray a little cleaning solution, such as isopropyl alcohol diluted with either pure or distilled water, onto a microfiber cloth and gently wipe the display in either an up and down or side to side motion. Too much pressure can compromise limited durability of even the most rugged LCD screens.

It is dangerous that an LCD display directly contacts with any liquids (especially when they’re still plugged in). A safer and smarter approach is to first wipe the screen with a dry cloth, then spray a small amount of cleaning solution onto another cloth and wipe gently. After that, wipe with another clean, dry cloth to remove the residual liquid.

Never use ammonia or rubbing alcohol based cleaners on LCD screens. They will damage the extremely delicate coating on top of screens, and negatively alter viewing experience, especially in strong sunlight.

Dust in gaps where bezels and top layers meet can cause internal damage to LCD displays. Regularly using a vacuum with a soft-bristled brush (to prevent scratching) can be helpful.

Now you know how to clean an LCD screen safely and correctly, if you find it helpful, please share this article with your friends. If there are more questions about LCD displays, please feel free to leave us a message.

Perhaps you’ve noticed that cleaning a display screen is not always as easy you’d assume. You’ve tried damping a paper towel with tap water and brushing it across your screen, only to be left with smudges, smears, and a few stubborn globs. Don’t worry… you’re not alone. This seems to be a common experience for the ever-growing number of digital device owners.

We would like to go over the proper cleaning methods so that you understand what works (and what doesn’t), and so you can relay that information to whoever might find it useful – whether that be you, your customers, your employees, or your father-in-law who just discovered the brand new world of handheld digital devices. The processes discussed here are helpful for nearly all displays, including touch screens and those with cover lenses.

Let’s go over the items you’ll need in order to clean your LCD screen. Be sure you have some kind of microfiber cloth and a cleaning solvent of some kind. As mentioned, you may already be well aware that the paper towel method isn’t effective, and that it can even cause scratches. This is why a soft cloth (or a microfiber cloth) will be a much better tool for cleaning. It is softer and does not leave particles behind that break away from the cloth, much like a paper towel does. If a dry cloth alone is not enough to get your screen up to standards, then you may want to apply the cleaning solvent.

Of course, not all solvents are created equal. Some of them work better than others for certain applications. Depending on the type of LCD display you have, you will want to do your due diligence. Many people will use distilled water as a solvent, as it has been known to be the least damaging to LCD screens. Granted, you can’t just poor it on there all willy-nilly. You don’t want to risk damaging any of the electrical components within the device.

You also should be cautious about using alcohol or ammonia based solvents, as they are capable of causing long-term damage to LCD screens, making the screen brittle and susceptible to cracking. They have also been known to cause discoloration issues. For best results, you should search for an LCD-safe solution. This, plus using the proper methods, will be the best for your LCD screen’s longevity. Here is a table that you can refer to in your search for an acceptable solvent:

Remember when your LCD or OLED display had that brand-new, fresh-out-of-the-box shine, feel and look? You are in the right place if your display is now due for deep cleaning.

A microfiber cloth and distilled water is recommended for cleaning the display glass. Use Qtips and Isopropyl alcohol for cleaning the printed circuit board.

Although distilled water is recommended for wiping the display glass, you can use a cleanser developed explicitly for cleaning displays. However, do not spray it directly onto the display. Spray a tiny amount of the cleaner onto a microfiber cloth first to avoid getting any cleaning solution inside the display.Never spray any liquids directly onto the display.A spray is too hard to control and confine. The fluids can seep into the other display layers or surrounding components and cause irreversible liquid damage.

Only use a microfiber cloth and don"t use chemicals to clean a resistive touchscreen.Disconnect the display from the power supply and remove any screen protectors or liners.

Isopropyl alcohol (IPA) is widely used to clean printed circuit boards (PCBs). Use a Q-tip or soft small bristle brush for scrubbing a PCB, and never use a paintbrush.Gently rub a Q-tip in Isopropyl alcohol.

Cleaning soldering residue on LCD with Isopropyl alcohol and a Q-Tip.Cleaning residue around soldering elements is not necessary if Newhaven Display performed the soldering.

Cleaning your electronic display is a simple task. However, it is essential to consider these steps to handle and clean it properly. You should now have a better understanding of what cleaning products are safe to use, how to clean the display screen glass, how to clean touchscreens and how to clean soldering residue.

Windows 10 laptops are built to be mobile, which means that a dirty screen is inevitable. A dirty laptop screen can become a source of frustration with those fingerprints, mystery spots, and smears a distraction. Unfortunately, there isn’t a magical solution to this problem and from time to time, the laptop screen will need to be cleaned. However, laptop screens are easily damaged, so it is important to follow manufacturer guidelines when cleaning them.

Cleaning a laptop screen is a delicate procedure, so a gentle touch is needed when wiping down the screen. All laptop manufacturers recommend using a soft cloth when cleaning the screen, most opt for a microfiber cloth to avoid damage. Before starting the cleaning process, it is best to turn off the laptop, disconnect the power cord, remove the batteries, and disconnect any external devices. As a safety precaution, disposable gloves should also be worn during the cleaning process.

According to HP, one of the keys to safely cleaning your laptop screen is choosing the right cloth or material. Common household materials, such as rags and paper towels, can cause damage to the screen. The best material to use when cleaning the laptop screen is a microfiber cloth. For non-LCD screens, a few drops of rubbing alcohol can be used on the microfiber cloth, but do not use alcohol when cleaning an LCD screen. It is important to check with the manufacturer to discover what cleaning products are safe to use on a specific laptop screen. Under no circumstance should any cleaning product be directly applied to the screen. Instead, the rubbing alcohol or other cleaning product should be dabbed onto the microfiber cloth first.

When the microfiber cloth and choice of cleaner have been gathered, there are proper techniques that should be used to clean the laptop screen. After dabbing the microfiber cloth with rubbing alcohol or another cleaning solution, start in the center of the laptop screen and gently wipe in a circular motion. Gently continue wiping in a circular motion until the surface is free from dust and dirt. Keep in mind not to directly apply the cleaning solution to the laptop screen and avoid using the moist section of the cloth on the corners of the screen. If a tough stain is encountered, it is better to find a stronger cleaning solution than to rub the screen harder.

Dell also says that cleaning liquids should never be directly poured or sprayed on the laptop display screen and that a microfiber cloth is used. Lightly moisten the microfiber cloth with a cleaning solution, Dell recommends a mixture of 70-percent isopropyl alcohol and 30-percent water. Gently wipe the cloth in one direction starting from the top of the screen and work to the bottom. After the screen is cleaned, make sure the surface is completely air-dried.

Samsung recommends using a microfiber cloth as well. Using a dry microfiber cloth, gently wipe down the laptop screen, but don’t press too hard. Using only water or a mixture of 50-percent distilled water and 50-percent white vinegar, gently wipe the screen, remembering not to press too hard. Again, allow the screen to dry before firing up the laptop for use. Alternatively, Samsung also suggests compressed air as another way to remove dust from a laptop screen.

So I let my mom watch a DVD on my notebook computer. It is a Inspiron E1705, Intel Core DuoProcessor T2300E with a 17 inch UltraSharp TrueLife Wide-screen WUXGA, for Inspiron 9400/E1705.

Somehow, she sprayed Coke on the screen either opening a bottle; either not noticing or not cleaning it up thoroughly. So when I got back to school this past week, what I thought was mold growing on the right side of my screens were dried up drops of Coca-Cola, very small, but you could see them when the screen was on.

Now, I want you to know that this is my first real notebook, so I had no idea (I mean, my old desktops had those durable and heavy glass screens). But I took some Windex and sprayed it on a paper towel (the kind that comes from a dispenser at school) and use that to try to get the spots off. It did the job, although some spots I had to gently rub with my fingernail to get the sticky off while putting as little contact as possible on the screen. Now I just have bits of dust on my screen, mainly from the paper towel. (You know, the ones that are at all colleges and feel like sandpaper somewhat?) Mind you, there was no scrubbing or anything, just gentle, almost "not-touching" of the screen.

Well, I soon realized by mistake when I was consulting the manual and it said not to use a glass cleaner. I then took some more of those paper towlels and dampened them lightly with water and wiped down the screen again. I am so worried that I have ruined this screen. So I just have some simple questions:

Screens can scratch easily, and even paper towels and tissues contain fibers that can do damage. “Your best bet is to use a soft, anti-static microfiber cloth—the kind used to clean eyeglasses and camera lenses—and wipe in a circular motion,” says John Walsh, who cleans more than 250 TVs a year in his role as a CR photographer. (Some TV manufacturers will include a cloth for this purpose.) “Gently wipe the screen with a dry cloth to remove dust and other debris, but don’t press too hard,” he says.

If there are hard-to-remove stains, you can dampen the cloth slightly with distilled water and gently clean the screen. Don’t spray water directly onto the screen; that could cause a shock or component failure if water seeps into the inner workings of the set.

For the most stubborn stains, you can try using a solution of very mild dish soap highly diluted with water, once again applied to the cloth and not to the TV itself. (As a guideline, Panasonic used to recommend a 100:1 ratio of water to soap.) LCD screens, in particular, are very sensitive to pressure and can scratch easily, so don’t press hard.

Keeping your precious rugged LCD monitors or LED screens clean and tidy can be challenging. This is especially true if you happen to have handsy young children who like to touch everything or pets running amuck in your household or even if you happen to work in a particularly messy environment such as a construction site or restaurant. Sometimes, rogue bits of debris can attach themselves to your electronic devices and while this is entirely out of your control for the most part, there are a few effective and harmless cleaning solutions you can put into practice to keep your electronics clean and running smoothly. Continue reading to learn about helpful tips for cleaning your LCD and LED screens without causing internal or external damage.

Before you can get down to the cleaning part, you need to prepare your LCD or LED screen in order to reduce the risk of liquids penetrating the surface and causing internal damage. Keep in mind that modern screens might technically include higher end features than the old school CRT screens from your childhood, but that doesn’t necessarily mean they’re more durable. In fact, modern LCD and LED screens are actually a lot more fragile and easily susceptible to damage if they’re not cared for properly. To prepare the screen for cleaning, make sure you shut down the system entirely, disconnect it from its power source, and then let it cool down for a few minutes. This will reduce the risk of electrocution and it’ll make it easier to clean the screen without resulting in annoying and unattractive streaks.

Occasionally, you’ll have to contend with a tough spot, streak, or fingerprint marking that takes a little extra effort to clean. If this happens, don’t panic and definitely don’t press down harder with a cloth or try to scrape it off with your fingernails or any other tool as this can cause severe damage to the top layer or anti-gloss coating. The best thing to do is use a non-abrasive cleaning solution such as isopropyl alcohol that’s diluted with either pure or distilled water. Spray the solution onto a microfiber cloth and gently wipe down the area in either an up and down or side to side motion. Applying too much pressure to even the most rugged touchscreen can compromise its limited durability.

There are a few types of cleaning cloths you can use to wipe down your rugged LCD monitor either at home or at work. The most recommended one is microfiber cloth for a multitude of reasons. First, microfiber is a state-of-the-art technological development that’s a thin and soft, yet strong enough material to thoroughly clean your electronic devices without risking damaging them in any way. Most of the time, computer and flatscreen TV manufacturers provide microfiber cloths with their products along with a specific set of maintenance and cleaning instructions. Microfiber cloths are immune to collecting or spreading lint across your screen, and because of the intricate way in which the minuscule fibers are intertwined these cloths are able to trap larger quantities of dirt and dust without leaving streaks. You can also use a cotton tea towel, a cotton t-shirt, or cotton handkerchief if you’re in a bind and don’t have microfiber cloths on hand.

This point can’t be emphasized enough. Even though it may seem like common sense that electronic devices shouldn’t come into direct contact with any liquids (especially if they’re still plugged in), not everyone seems to think so and many people have made the mistake of spraying cleaning agents onto their devices. The safer and smarter way to clean any rackmount LCD display is by first wiping it down with a dry cloth and then spraying a small amount of the cleaning solution onto a different cloth and wiping it down gently. After you do this, wipe it down with a clean dry cloth to remove any remaining liquid.

Always avoid using ammonia or rubbing alcohol based cleaners on your touchscreen devices. The devices themselves might be constructed with the capability to withstand most types of damages, but certain features they possess aren’t. Ammonia and rubbing alcohol can irreparably strip away or damage the extremely delicate anti-glare coating on the screen, which will not only negatively alter your viewing experience but also make your device a lot harder to use in strong sunlight.

Dust that settles between the gaps in the screen where the bezel and the top layer of glass or plastic meet can penetrate deeper and cause internal damage to your device. Regularly using a vacuum with a soft-bristled brush (to prevent scratching) can help you keep your device clean and free of any issues.

For extra measure, you can also spray the surface of your screen, computer keyboard, or even the vent on the back of the device with a can of compressed air to blast away any lingering and stubborn debris or dust. If any of it lands on the surface of the device, make sure to gently wipe it away with a clean cloth to prevent it from making its way back into your device. Implementing this cleaning method on a regular basis will ultimately help to guarantee the longevity and functionality of your device.

Nauticomp Inc. is the proud designer, manufacturer and distributor of countless rugged LCD and LED monitors and displays. We’ve been working in the technological industry for more than 20 years and supply a variety of businesses including marine bases, military bases, restaurants, casinos, retail stores, shopping centers, and healthcare facilities with durable and high-quality LED and LCD displays that serve a wide range of purposes. For more information about our company or our products, please feel free to contact us.

Whether you’re gaming or burning the midnight oil on a work project, there’s nothing more annoying than a dirty computer screen. The only problem is that most computer screens are highly sensitive and require a delicate touch to prevent damage.

If you’ve ruined a monitor before or you want to keep that brand new laptop running smoothly, this article will provide you with all the information you could possibly need to keep your screen squeaky clean without damaging it.

Wondering how to clean your laptop screen without causing any damage? You don’t have to be a tech guru to understand that any kind of liquid getting into the hardware of your laptop spells disaster. Because of this, you should avoid liquid sprays.

One of the most common mistakes people make when attempting to clean their laptop computer screens is using a liquid cleaner. As a general rule, try to avoid them altogether, however, there are few safe liquid substances you can carefully use to clean laptop screens.

If you aren’t having much luck with a dry cloth or if you spilled something on your screen, you can try using a bit of rubbing alcohol (for non-LCD screens) if you don’t want to buy a specified cleaning product.

If you have an LCD screen, do not use rubbing alcohol as it will damage your screen. If you’re unsure about what products are safe for your laptop or you aren’t completely sure what kind of screen you have, look up the products that the manufacturer lists as restricted for cleaning.

With the right cloth or material, a cleaning substance may be completely unnecessary. Microfiber cloths are the best possible material to clean your PC with, since paper towels, household rags, and old T-shirts will scratch and damage your screen.

Of course, there will be instances where no amount of gentle wiping will remove the soda your toddler spilled on your laptop a week ago. In these circumstances, you may have to turn to a serious computer cleaning solution or rubbing alcohol. Just remember that when you clean your laptop’s screen, a delicate touch is vital to the long-term health of your display.

Sometimes you can’t splurge on ultra-expensive products when trying to clean your laptop screen and you have to rely on alternative methods. There are plenty of household items that can be used, such as rubbing alcohol. However, there are some that are dangerous to your screen which you should try to avoid.

A brand new sponge is a great way to clean a screen. You will need to lightly dampen the sponge (but not too much); the last thing you want is for water to drip down into your laptop.

If, and only if, you have a glass laptop screen, it’s safe to use Windex as a cleaner. Sturdier computers sometimes have a clear glass screen over the front of the display - much like a cell phone. A bit of Windex sprayed onto your microfiber cloth will certainly get the job done. But remember, never spray the Windex directly onto your laptop screen itself.

If you don’t have a microfiber cloth or a sponge fresh out of the package, a soft duster brush will work. A traditional feather duster might damage your screen but there’s a good chance you’ve adopted the Swiffer® duster into your household. These cleaning cloths are made from thousands of tiny polyester fibers and are the next best thing for cleaning your screen if you don’t have a microfiber cloth.

If you ever find yourself questioning the methods by which you plan to clean your laptop screen, it’s best to err on the side of caution. To take extra precaution, you can order specialized products and cleaning solutions online or pick them up at electronic stores.

Compressed gas is one of the best places to start when learning how to clean your laptop. Not only is this product great for removing the dust on your screen, but it’s also good for cleaning your keyboard as well. Dust-Off®, Endust®, and Fellowes® are all solid and reliable brands of compressed air that have withstood the test of time. They are available at grocery stores, drug stores, and computer stores, as well as many online retailers.

Bryson Screen and Laptop Cleaner is a reasonably inexpensive cleaning solution that’s as easy to use. Just spray it onto a screen-safe cleaning cloth and wipe away all of your worries.

The i-ScreenClean Ball 3-Pack is a great tool for daily cleaning and maintenance. With the i-ScreenClean ball, you can entirely avoid the use of liquids while you clean your laptop screen or monitor. Bigger problems like spills and stains will require the use of professional cleaning products, but for the most part, the cleaning ball is a great way to go.

The corners of your monitor or laptop screen are often the most difficult and frustrating to clean. Fortunately, cleaning brushes for detailing are available. The Oxo Good Grips cleaning brush is perfect for reaching into the corners of your laptop’s display. This tool will allow you to avoid the use of liquids and give your laptop a complete clean.

You can find most of these products online or at computer stores along with wipes and other cleaning supplies that were specifically designed for laptop screens and monitors.

Once you’ve cleaned your laptop screen, try to keep it that way. One of the primary reasons your screen continues to get dirty so often is because of your keyboard. Dead skin cells, dirt, and grime from your fingertips get on the keyboard and transfers to your laptop’s screen when you close it.

The best thing about touch screens, especially tablets and smartphones, is that they usually come with an additional protective screen that makes it much easier to clean. However, you should still take the same precautions that you would with a standard laptop screen.

While touch screen laptops aren’t always made of the same materials that traditional smartphones and tablets are, they may often be just as sensitive. The best thing to do is pick up a microfiber cloth and give your screen a gentle wipe down using the same techniques previously mentioned.

Unless you plan to wash your hands before each time you use your touch screen laptop, you should make an effort to clean it far more frequently. All that grime on your fingertips dragging across your screen can cause a major build up.

Touch screens are especially sensitive to pressure, so make sure you don’t press down too firmly while you’re cleaning since it could wear out the sensors or even damage them. You will also want to turn your screen off before cleaning. You wouldn’t want to accidentally send out a strange jumbled-up email to an important client while you’re cleaning.

When learning how to clean your monitor or laptop screen, it’s always better to be safe than sorry. You invested a significant amount in your laptop and other electronics. It would be wise to invest a small amount in their care and upkeep. Investing in a microfiber cloth that you keep in your desk just for your laptop, along with a cleaning solution kit might cost you a few bucks but it will cost you far more to replace a damaged computer screen from careless cleaning.

If any marks remain, moisten the cloth with LCD cleaner, and then gently stroke the cloth across the display in one direction, moving from the top of the display to the bottom.

Notice: Do not use any of the following chemicals or any solutions that contain them: acetone, ethyl alcohol, toluene, ethyl acid, ammonia, or methyl chloride. If you have a different chemical or solution and are not sure whether it is suitable, do not use it. Using any of the chemicals in the previous list may cause permanent damage to the LCD screen. Some commercial window cleaners contain ammonia and are, therefore, unacceptable.

Note: Many cleaning solutions are sold specifically as LCD cleaners. You can use these to clean LCD screens on Dell laptops. Alternately, you may use a 50/50 isopropyl alcohol and water mixture. Microfiber cloths such as those used to clean eyeglasses are excellent for use with LCDs.

Please visit the support page for your manufacturer to find out how to clean your LCD. The support pages for some manufacturers are listed on the Checking Warranty page.

It is always best to follow manufacturer’s suggestions for product care, but generally it is safe to clean an LCD screen using a very soft, 100% cotton cloth, and a mixture of distilled water and clear vinegar. If you prefer buying ready-made products, LCD cleaners are available from electronics shops in spray bottles.

While it might be tempting to use an old tee shirt for a cotton cloth, the seams can potentially scratch the screen. Flannel is the recommended material, and you can visit a fabric shop and buy a yard (0.9 meters) of 100% untreated cotton flannel for very little money. By purchasing this amount of fabric, you’ll be able to cut new cloths when the old one gets dirty. Microfiber cloth is also a good choice.

While many people use isopropyl alcohol in a 50/50 solution with distilled water, some manufacturers warn against this. If you are inclined to use isopropyl rather than vinegar, check with the manufacturer’s website of your LCD product to be sure this is acceptable. Many store-bought LCD cleaners contain isopropyl, and it is generally considered safe and effective.

Cut a piece of cloth large enough to fold into a nice square pad that is a few layers thick. Spray your 50/50 solution on to the surface of the cloth, lightly dampening it. Be sure the cloth isn"t so wet that it will drip down the screen. Do not spray the solution directly on to the LCD screen.

Before you clean an LCD screen, power it off to avoid potential damage. Take your cloth and gently wipe the surface from top to bottom, moving downward in a straight line. When you reach the bottom lift the cloth away and place it at the top again to proceed. Use a very light touch, as pressing against the screen could damage its pixels.

Do not move the cloth in a circular motion to rub out fingerprints or smudges. The solution will do the trick. If you have to cover an area twice, wait until its dry, then repeat the process. The vinegar should cut through any dirt or body oils deposited on the screen. By following this simple procedure, your screen should stay clear and unblemished.

Never use paper towels, napkins, or tissues to clean an LCD screen. These materials will either scratch the screen or leave debris. Household cleaners and ammonia should also be avoided, as they can leave a white cast, ruining the screen’s finish.

Dip your microfiber cloth (or a large cotton swab) into your rubbing alcohol. Wring it out to prevent drips. Gently wipe down your keyboard with the alcohol and allow it to air dry.

The same instructions apply for laptop touchpads. Simply turn off your laptop and swipe a clean microfiber cloth dampened with rubbing alcohol across the touchpad, and let it air dry.

Ideally, you should clean your phone at least once a day by following your phone"s manual for cleaning instructions. Cleaning your device the wrong way (like using rubbing alcohol and paper towels) can strip away coatings that protect your screen. There are safer items that will do the trick.

If you touch your phone after touching a public door handle or grocery cart, your first thought might be to clean it with rubbing alcohol. Don"t. Straight alcohol can strip the oleophobic and hydrophobic coatings that keep oil and water from damaging your phone"s display and other ports.

AT&T"s cleaning guidelines suggest that you "spray a nonabrasive or alcohol-based (70% isopropyl) disinfectant directly on a soft lint-free cloth and wipe down your device while it is powered down and unplugged." Samsung has also said you can create an alcohol-based solution of 70% ethanol or isopropyl alcohol, applied with a microfiber cloth.

When you have a full face of makeup and need to make a call, guess what that foundation is about to stick to? That"s right, your phone screen. And while you may use makeup remover to take off your makeup every night, you shouldn"t use it as a screen cleaner due to some chemicals that could be lurking in the ingredients. (Organics.org explains the chemicals that could be in your makeup remover.)

Since some hand sanitizers have ingredients like fragrances and ethyl alcohol, it"s best to keep sanitizer off your phone"s screen. However, if you"ve touched anything outside your home, you should sanitize your hands before touching your phone to prevent viruses and bacteria from spreading. For best results, use a manufacturer"s hand sanitizer

A screen"s scratch-resistant properties won"t get ground down by cleaning agents, but stripping that protective coating is still a problem. That"s why Apple also suggests not using household cleaning products to clean your iPhone, including bleach. Bar Keepers Friend, for example, states that its abrasive formula may harm the protective layer. Bon Ami states not to use it on glass with coatings.

They may be the go-to for cleaning your desk, but keep them away from your phone. The paper can shred, making the debris on your phone much worse. Paper towels can even end up leaving scratches on your screen.

Since many newer phones have a protective coating, rubbing alcohol can wear it away more quickly over time, causing your phone to be more prone to scratches. Make sure to check for alcohol in the product ingredients on any "safe to use" phone screen cleaners. Apple says to avoid alcohol when cleaning its devices.

Some makeup removers may have chemicals that can be harsh on an electronic screen. LeBeau suggests avoiding makeup remover and instead, using a soft cloth with a little bit of water.

Your phone is delicate, so blowing an intense amount of air into its portals can cause damage, especially to your mic. Tech companies, like Apple, specifically warn not to use compressed air.

This is a no-no. Vinegar will strip the screen"s coating. You could, as Lifehacker suggests, use very diluted vinegar to cleanse other parts of your phone. Android Central suggests a 50/50 mix with distilled water for cleaning the sides and back.