alcohol damage lcd screen factory

• Perform highly diversified duties to install and maintain electrical apparatus on production machines and any other facility equipment (Screen Print, Punch Press, Steel Rule Die, Automated Machines, Turret, Laser Cutting Machines, etc.).

When a laboratory has an abundance of electronics that need to be kept in working order, eventually it’ll be necessary to find the right chemical to use for cleaning. For most laboratories, a solution comprised of distilled water and an alcohol is the right solution because of its low-cost and high-efficacy cleaning potential. But, especially for laboratories which may just be getting established for the first time, it may be unclear which alcohol is the appropriate choice to make the cleaning solution.

The question of ethyl alcohol vs. (IPA)for cleaning electronics has several ramifications for the laboratory supply chain as well as the longevity of laboratory hardware. To shed light on this issue, it’s necessary to briefly discuss why electronics need a special cleaning solution at all.

Cleaning electronics is a bit different than cleaning other pieces of laboratory hardware because electronics can be easily damaged when they are exposed to minerals or ionic compounds. The reason for this is that electronic components require the unimpeded flow of electrons to properly function; any disruption in the pre-engineered flow of electrons within a component will result in the component malfunctioning via a shorted circuit at the point of disruption.

Of these components, it is typically sensors and exposed semiconductor materials which are the most vulnerable to damage by using the incorrect cleaning solution. If water bearing minute quantities of dissolved minerals splashes onto an exposed semiconductor, it will be nearly impossible to remove the trace minerals which will disrupt electron flow.

The printed circuit board plastics of electronic components are typically the hardiest part of any laboratory hardware. However, when exposed to the wrong cleaning solution, even the hard plastic of PCBs can corrode—and manufacturers are rarely willing to replacing a damaged PCB as cheaply as they might replace a sensor or semiconductor component.

Ethyl alcohol is a great choice for cleaning electronics in the laboratory because it’s inexpensive, mineral-free, and evaporates quickly.While ethanol isn’t a strong solvent, it is typically sufficiently powerful to clean sensitive electronics which may have accumulated light layers of corrosion or dirt. It’s also a useful chemical for a plethora of laboratory tasks ranging from basic sterilization to removing labels from old pieces of hardware.

Whereas standard laboratory task-grade ethanolis inexpensive and most laboratories will have a vast reservoir prepared to tackle whatever is needed, standard grade ethanol is not pure enough to be used to safely clean electronics. Despite having minimal mineral content, the trace minerals leftover from the manufacturing process in standard grade ethanol will have a deleterious effect on lab electronics, though the damage will be nowhere near the damage caused by water exposure. Instead, cleaning electronics with ethanol requires the use of ultra-pure ethanol, which has been purged of all extraneous mineral content. Alternatively, ethanol-soaked laboratory wipes can be an appealing way to clean electronics.

is the more common choice for cleaning electronics because it evaporates more rapidly than ethanol and also because it does not leave any traces of oils upon evaporation. Similarly to ethanol, most laboratories have ample quantities of isopropyl alcohol (IPA) around for general purpose use.

However, unlike ethanol, the most common sources of laboratory isopropyl alcohol are ready to use for cleaning electronics. Lab wipes and reagent-grade bottles of isopropyl alcohol are each pure enough to clean sensitive electronic components without hazard.

Not all electronic components are compatible with isopropyl alcohol cleaning, however. In particular, polycarbonate electronic components, typically in PCBs, seals and gaskets, are extremely harmed by exposure to an isopropyl alcohol cleaning solution. While it may be possible to mitigate the impact of the cracking which occurs when isopropyl alcohol seeps into the polycarbonate by using a more dilute cleaning solution, a better strategy is to avoid using isopropyl alcohol on these components entirely.

Notably, isopropyl alcohol also combusts more readily than ethanol. While the difference is negligible in most lab situations as both will alight when exposed to an open flame, laboratories which routinely operate sensitive experiments at high heat may find that isopropanol is too volatile to be safely used for cleaning components which may still be warm from use. Importantly the residual oils from ethanol may be problematic in this context as well, so the advantage of ethanol is not assured.

Anticipating a laboratory’s utilization of key cleaning chemicals like isopropyl alcohol is significantly easier when a laboratory works with a knowledgeable supplier who understands the lab’s typical needs. By working with the right supplier, labs can ensure that they have consistent access to the chemicals they need, when they need them.

Isopropyl Alcohol is commonly found as rubbing alcohol in the grocery store, usually in a 70% isopropyl alcohol 30% distilled water mix; there is no need to dilute it when it comes that way. Some stores may sell 100% isopropyl alcohol which should be diluted. Something about the 70/30 mix causes the alcohol to evaporate away in the most efficient manner, so it"s better to do that than a 50/50 mix.

Isopropyl alcohol should be used only when distilled water won"t do the job, because repeated applications can eventually damage more delicate finishes.

Most are aware of IPA 99% highly effective utilization for medical use and as a laboratory solvent, but Isopropyl Alcohol plays an important role in the everyday maintenance of electronics for businesses, manufacturers, and consumers.

Isopropyl Alcohol 99% is the best substance to use for this purpose. Isopropyl Rubbing Alcohol 91% may also be effective, but it is best to use the purest IPA available.

A cloth, cotton swab, or cotton swab can be applied with Isopropyl Alcohol 99% to the electronic parts that need to be cleaned, but be sure not to leave any fibers on the device components.

Over time, dirt, smudges, dust, and more can reduce the picture quality on an LCD, much like looking through a dirty pair of glasses. Cleaning an LCD screen is a simple and straightforward process.

3. Do not spray any cleaning fluid directly on the LCD screen to prevent liquid from dripping inside of it. (This also applies to touch screen monitors.)

4. A suitable cleaning solution for LCDs is a mixture of 50% Isopropyl alcohol and 50% distilled or otherwise purified water. For touch screens, 5-10% bleach may be used to clean the touch glass without harming it.

5. For purposes of disinfecting, benzyl alcohol and/or hydrogen peroxide can be used without harming the LCD screen and/or Touch Screen; please follow the same application directions as above to avoid damaging the touch screen and/or PC.

Like the OP, I"ve always used a 50/50 mixture of isopropyl alcohol and distilled water. Just now, I seem to have damaged the screen of my (Late 2013) MacBook Pro Retina by cleaning it with this mixture and a microfibre cloth.

There is a coating on the screen that has rubbed off in a patch about a quarter inch wide and two inches long. It"s very noticeable, but luckily it"s on the bezel rather than the screen proper. I"ll probably live with it, as a repair would probably involve replacing the whole screen. ($$$$)

This was possibly the third or fourth time that I"ve used this mixture to clean this screen in the few months that I"ve owned this machine. It"s really annoying to find that the most expensive laptop I"ve ever bought has a screen that can be so easily damaged, using a cleaner that I"ve seen recommended lots of times on the web and which has worked well for me in the past.

Regardless of the model you own, it is important to protect your investment.  Cleaning your television is straight forward.Flat screen TV’s have come along way. Components contributing to the television began as early as 1831.  Televisions on the market today are using semiconductors nanocrystals, self-illuminating pixels and an array of light-emitting diodes (LED) as pixels for a video display. These massive wall units deliver access to the world through content from shows, news and apps competing for our attention.  In some respects, the price for a flat screen TV has become more affordable, while the market is still there for individuals willing to pay much more for an award-winning consumer’s choice best picture.

There are some clear do’s and don’ts in caring for your flat screen. Hopefully, these tips shed some light when it’s time to clean your TV’s front and backside. Dust build-up can affect the quality of the images on your screen. By routinely cleaning your TV"s you can prolong the life of them.

Avoid using alcohol or other consumer cleaning product with harsh chemicals. Glass cleaners contain both alcohol and ammonia. Many televisions have anti-reflective coatings. Alcohol can cause clouding and permanently damage the screen

Dust can become trapped in the fibers and create scratches on your screen.  A higher GSM count microfiber cloth is plush and better for trapping dust. However, the dust remains inside the fibers and may cause tiny scratches on the screen.  These are great cloths but not ideal for cleaning a flat screen.

Most cities in the united states suffer from hard water which contain minerals such as calcium and magnesium which tend to leave a visible residue on your screen.

Gently wipe the surface using a clean, dry or barely damp split fiber microfiber cloth. These cloths have an electromagnetic charge which attract dust to the cloth. The split fibers trap the dust there. Be careful to not rub or press too hard on the screen.

It is important to use the best tool for cleaning the flat screen.  A flat weave microfiber cloth is the best option for cleaning a flat screen just as you would to polish wine glasses and optical lenses.

If your cloth is larger, fold it in half and then half again.  This Allows you to clean with 8 clean sides of the cloth.  You should never have to use a dirty part of the cloth more than once if you purposely clean 1/4 of the screen at a time.

Many of us are guilty of dropping our phones into water or getting them wet by accident, and many of us regret our decisions almost instantly. After you’ve dried off your phone, you might attempt to fix it with a hairdryer, but few of us are aware that there is a much better way: alcohol.

Ever drop your phone into a puddle only to find it not working? Well, bad news—there are many reasons why your phone may not work, and most of them cannot be fixed. Unfortunately, if your phone is wet or has water inside it, you have very few chances of getting it working again, so you may be left with a very expensive paperweight. Read below if you are finding ways to fix or revive a phone dropped in water by using alcohol.

Phones are getting techier and techier, but have you ever wondered if alcohol could take a tech problem away? Fortunately for you, you’re in the right place. While alcohol can’t fix your phone’s problem (it can’t fix anything, really,) it can help to numb the pain.

The first question you must ask yourself (and your phone) is whether or not the problem is related to alcohol. If you have repeatedly dropped your phone because of spilled drinks or water, then it is likely that your phone is suffering from liquid damage.

This is not the type of damage that can be fixed by alcohol, since alcohol will speed up the corrosion of the phone’s internal components. To fix liquid damage, you will need to have your phone disassembled, cleaned, and resealed. However, the alcohol will dry out your phone’s internal components. The only way to fix this type of damage is to replace the unit.

Either way, it’s annoying. And if your phone has a cracked screen, it can also be dangerous, so it’s important to get it fixed as soon as possible. Unfortunately, fixing a cracked screen by yourself can be a huge hassle, especially if you don’t have the right tools. But the alcohol is one thing that can easily fix water damage problems or any other display, or touch screen issues.

To regain any functionality, you’ll need to seek out a repair shop that knows how to properly repair a damaged phone. Sometimes alcohol can’t repair the phone so you need to visit a service center which is the last option.

If you have an old cell phone that stops working, you may have tried charging it, turning it on and off, and even replacing it. However, there’s one problem—you just can’t get it to charge. Maybe your phone has water damage, or there are cracks in the screen, or maybe the internal components simply don’t work.

No matter what the reason, your phone isn’t working. Should you just throw it out? No, first you need to try the alcohol, and then if it does not work try the repair shop.

There are many different ways to test a cell phone’s integrity and capacity. One way that many shops use, especially in franchised shops, is the LDI test, which stands for “Low Device Integrity.” In the LDI test, the technician will damage the phone in some way to see if the phone will recover.

Your smartphone may be one of your most cherished possessions. That’s why it’s important to make sure it keeps running smoothly and is protected against water damage. Unfortunately, water damage is one of the most common causes of cell phone damage. If your device is wet, turn it off right away. Don’t turn it on until it’s fully dried out.

When it comes to your phone, there is one repair method that cannot be avoided: you need to crack open the case. If your phone is water-resistant, you’ll likely have a tight seal around the phone’s internals; if you break the seal, the alcohol will soak into your phone’s internals, killing any moisture or liquid in the process. (And don’t bother trying to dry your phone with paper towels or paper napkins; neither one will dry your phone, especially if it’s wet.)

While you could simply buy a new phone if your iPhone 11 or 12 is suffering from water damage, many of us would rather try and salvage what was lost. That’s especially true if the phone is a gift from a loved one, or you still use it frequently.

So, what do you do when your phone gets wet? Well, one option is to use alcohol to fix the damage. As you might expect, alcohol will take some of the water out of your phone, but unfortunately, it won’t work miracles. In most cases, the alcohol will dry out the phone enough to restore functionality, but it won’t fix everything.

Dropping a cell phone in water isn’t something most people look forward to—if you want to quickly fix it, you can use alcohol. Apple users may have stumbled upon this trick a few years ago after dropping their phone in a glass of beer, and now Android and iPhone users alike are using it to fix their phones even if they get into a puddle or wet themselves.

Isopropyl alcohol, also known as rubbing alcohol, is 99% pure alcohol. In other words, when dissolved in water, the resulting solution is only 1% water. Isopropyl alcohol is an odorless, colorless liquid, with a pungent odor. Isopropyl alcohol, also known as rubbing alcohol, is 99% pure alcohol.

In other words, when dissolved in water, the resulting solution is only 1% water. Isopropyl alcohol is an odorless, colorless liquid, with a pungent odor. Isopropyl alcohol, also known as rubbing alcohol, is 99% pure alcohol. In other words, when dissolved in water, the resulting solution is only 1% water. Isopropyl alcohol is an odorless, colorless liquid, with a pungent odor.

Isopropyl alcohol is a very useful solvent. It is used in hospitals for sterilization of food and it is also used for sterilization before surgery. And it is also used in industries for thinning paints, varnishes, and lacquers. It is also used in the manufacturing of cosmetics. Isopropyl alcohol is flammable, which is why it is dispensed in special safety containers. It is also toxic and needs to be used in extremely small amounts.

Isopropyl alcohol (IPA) is a clear, colorless liquid with a strong alcohol smell. It is also sometimes called “rubbing alcohol” since it is often used to clean off small wounds. IPA is flammable and used as a solvent. Although IPA is not considered a carcinogen, it is associated with cancer in animal studies. It can cause dizziness, nausea, and headaches, but is generally considered to be safe when used as instructed.

Isopropyl alcohol, also known as rubbing alcohol, is a common household staple. It’s often used in cleaning solutions, lubricants, rubbing alcohol, and as a solvent. Isopropyl alcohol is relatively non-toxic liquid alcohol, which tends to irritate the skin if it gets on it. However, some sources of isopropyl alcohol contain additives that may contain allergens. If you’re allergic to isopropyl alcohol, it can cause reactions like burning, skin rashes, itching, and swelling.

Isopropyl alcohol, also called isopropyl ether, is a clear, flammable liquid with a strong odor. It is a strong solvent for organic compounds. It is typically sold in smaller bottles and is used for laboratory work, but can also be found in larger containers of 500 ml and up. Isopropyl alcohol can be flammable and evaporate quickly, so it is advisable to properly store it.

Isopropyl alcohol is a colorless liquid with a faint odor. It is used in the manufacture of some medicines, as a solvent, and in some cosmetic products. It is also used in some industrial processes, such as in the manufacture of rubber. Isopropyl alcohol is an isomer of ethanol, which is found in alcoholic beverages.

70% isopropyl alcohol is a common, everyday chemical found in many household products. Many people use 70% isopropyl alcohol to clean and disinfect their kitchen and bathrooms, but did you know it also has other uses? Ya, you can use it on your phone also.

Alcohol is alcohol, right? Wrong. There are all forms of alcohol, but pure alcohol is only one form, and it’s not the healthiest. It’s the one form of alcohol that is most likely to cause you harm. 99% pure alcohol is more dangerous than other types of alcohol because it contains the most isopropyl alcohol.

When it comes to cleaning, lots of methods are available: soaps, detergents, baking soda, vinegar, alcohol, and so on. Although each has its own merits, alcohol-based cleaners are fast becoming the go-to for many homeowners. They’re effective, they’re fast, and most importantly, they’re safe and easy to use.

70% and 91% of isopropyl alcohol aren’t labeled as alcohol, but they’re often used in cleaning, disinfecting, and polishing. Although 70% alcohol contains 70% pure alcohol, 91% alcohol contains only 91% pure alcohol. You can use 70% isopropyl alcohol on the motherboard to dry it up.

Isopropyl alcohol is used in cleaning all kinds of surfaces. You can wash dishes with it, you can use it to disinfect surfaces, and you can use it to clean things like countertops and floors. It’s even used on pets since it helps remove parasites and ticks. However, not all types of alcohol are the same.

The type of alcohol you’re looking for is 70% or 91% isopropyl alcohol. You can get 70% alcohol at most pharmacies. You can also find it in alcohol sprays or spray cans. However, 91% of isopropyl alcohol can only be used under a special permit, since 91% of isopropyl alcohol is too strong for household use.

Isopropyl alcohol, also known as rubbing alcohol or isopropyl carbitol, is a colorless liquid that is sold as rubbing alcohol, antiseptic wipes, and in some skincare products. It’s sterile and kills bacteria, viruses, mold, and fungi. It evaporates quickly, leaving no residue. It’s safe for use on skin, but should be done with caution. Its chemical name is 1-(2-Propanol)-2-propanol and the chemical formula is C11H18O.

First, find your phone, then grab a bottle of 99% isopropyl alcohol and some cotton swabs. Dip a cotton swab into the alcohol, wipe over the screen, and let it dry for 15 minutes, and then repeat until the screen is clean.

You might not need a new phone—or a new phone case—but your phone likely needs to be cleaned. Dirt, wax, and oils can build up on your phone over time and can affect the device’s performance. And if you have an older phone, the oils, waxes, and other contaminants may build up on your old phone’s screen, which can cause glare.

But removing all this grime from your device can be hard to do because cleaning your phone with water alone isn’t always enough. Here Bathing your phone in 99% isopropyl alcohol is the best way.

You can drown yourself in alcohol. The liquid will pour into your ears, your mouth, your ears, your eyes, and your mouth. But can it get hot enough to melt your phone? Things get hot enough, but beer is not the liquid that melts your phone. Wine and liquor are. And heating up with alcohol is no joke.

Do you remember the day you accidentally dropped your brand new smartphone in a glass of beer? Well, now it’s our turn. The newest smartphone in the One line has a metal band around its body. The metal band protects the smartphone’s glass screen, but all your fingerprints will end up on that band, too. And, just like with your fingerprints, you can’t clean it off. You’ll need to submerge your cellphone in alcohol, like rubbing alcohol, to get all the gunk off.

Did you know that if your phone is submerged in alcohol, it can still function? That’s right. You can submerge your phone for up to 15 minutes in alcohol without causing any damage to your phone. The only problem is it takes hours or days, depending on how deep you submerged your phone before your phone will fully dry out.

A smartphone is something that most people can’t live without these days. It’s your connection to the world and your connection to your loved ones. It’s where you store all your photos and important information. So, it shouldn’t be surprising that so many people are losing their phones permanently to alcohol every year.

If you’re the unfortunate owner of a cracked or damaged phone, don’t panic. While it can be difficult to repair phones, it isn’t impossible. To learn how to fix your smartphone, start by figuring out if the damage is hardware-level or software-level. Hardware-level damage is when something has broken off inside the phone; it could be the screen, the motherboard, or the battery.

So, you dropped your phone, and now the screen is cracked. But, rather than taking it to a repair shop—which could cost you upwards of $100—you have decided to try to fix it yourself. The problem is, that you’re not sure if you should remove the parts from your device before treating the crack with the alcohol.

You’ve found your phone in a pool of water. Now what? Safely drying your phone can be tricky, especially if you’re not careful. Some sites recommend waiting to dry your phone in a dry place, while others advise “letting the phone air dry” after removing the battery. While your phone is soaking, you might be wondering: how long should you soak it in alcohol? The answer is about 10-15 minutes is a good time to soak in water.

But what if your phone develops a fault while you’re out and about, or, worse, you find yourself locked out of your phone? In this situation, you’re probably panicking—and, if the phone is an expensive one, you’ll probably also be worried about losing it. Luckily, there are a couple of things you can do to get your phone working again. If it water damage problem just apply a dry process to your phone by using the dryer.

If you’re like me, you love your phone. You take it everywhere, and it’s one of the first things you check when you wake up in the morning. But you don’t want anything happening to it, least of all water damage. So I’ve put together a simple, step-by-step tutorial on how to dry out your cell phone, as well as what materials you’ll need and where to get them.

This tip comes from the Abrupt Technology website. Dry your cell phone with a hairdryer. The LCD screen was wet when the phone was submerged, and it’s most likely still wet. The dryer will help evaporate any water that’s left.

Is your phone screen a bit grimy? Or have you done some soldering on that gaming PC you’re building? Learn how you can safely use isopropyl alcohol to clean your electronics – and when you should opt for another solution.

Cleaning electronics with isopropyl alcohol (IPA) can seem like a simple task – just wipe, swipe, and give it a moment to dry. But electrical gadgets are notoriously delicate. What components can be safely cleaned with IPA? When should you use a milder vs. a stronger solution?

Isopropyl alcoholis made from a chemical process that combines water and propene and then distills it to a given strength, usually from 60-99 percent. (The higher the percentage, the less water is contained in the mixture. The common 70% isopropyl alcohol you buy in a drug store is 30% water.) It has a strong smell, evaporates quickly, and is well-known as a sanitizer, disinfectant, and cleaning agent.

Ethanol or ethyl alcoholis made from fermenting sugars (just like beer or wine). It’s not the same as IPA; you can see our earliercomparison of denatured alcohol vs. isopropyl alcoholfor a more detailed explanation. As a rule, IPA is preferred over ethanol for cleaning electronics because it evaporates cleanly and doesn’t leave behind any potentially harmful residue.

IPA, especially in the higher concentrations, is commonly used to clean electronic components during the manufacturing process. It’s also a go-to solution for many professionals. This is because isopropyl alcohol:

Sanitizes surfaces.IPA kills bacteria and viruses, but it needs some time to do so. This is why lower concentrations (between 60-70 percent) are preferred for sterilization; they have a slower evaporation rate and a longer dwell time (i.e. the time the alcohol is in contact with the surface).

May remove or prevent water corrosion damageif applied correctly. This is getting into the expert realm, though, so be sure you completely understand the process before you try it.

You can use70%,91%, or99% isopropyl alcoholto clean various types of electronics – what you choose will depend on what you’re cleaning. For externals – such as disinfecting your smartphone or TV remote – 60-70 percent will do a better job. The purer higher concentrations are better for removing grime and debris from water-sensitive areas. If, for example, you’re working near a computer motherboard, the lower water amount in 90-99% IPA will prevent even the chance of impurities harming delicate circuitry.

Smartphones, tablets, and computer monitors: Avoid applying anything liquid to the speaker, microphone, camera, and screen area.As mentioned earlier, the best approach is to spray a cleaning cloth and then wipe the device with the cloth. Avoid using IPA directly on the screen, as some manufacturers add an oil-repellent coating to the screen that can be damaged by it. A 50/50 vinegar and water solution is better for touchscreens; just apply it to the cloth as described above.

TVs: If possible, use a damp cloth and a dry microfiber cleaning cloth to remove smudges from your TV. If that doesn’t work, use the vinegar and water mixture in the same way as you would for a touchscreen.

We always advise cleaning electronics with the smallest amount of isopropyl alcohol necessary. It’s usually best to avoid directly spraying the device with alcohol. If you follow the proper precautions, you can safely and effectively clean your electronic equipment with IPA.

You’re on your computer A LOT. If you’re like most people, you’re on it anywhere from 3 to 7 hours a day. And the screen is REALLY close to your face, like 12 inches or so.

Which means all that coughing, sneezing, coffee sipping, and touching is inevitably leaving behind a trail of gunky, oily, germy messiness. Most visible when the screen goes black, sure, but sitting there, staring back at you the whole time. What to do?

The sleeve of your shirt won’t cut it this time. It’s time for a computer screen intervention (aka a helpful cleaning guide) to bring the dignity back to your monitor.

Don’t directly wet the screen. That means never spray it. If you’re going to use a cleaning solution, spray your cleaning towel, and then wipe the surface of the screen. When you spray it directly, you risk oversaturating the pixels, which can cause component failures, electrical problems, and even fire.

Don’t use regular cleaning supplies. Using multi-surface or glass cleaning products is a big no-no. The chemicals in these products are too strong for your monitor. Even regular soap and water is too harsh of a solution for your computer screen.

Don’t press too hard. Use a gentle circular motion to clean your screen and never apply too much pressure. Doing so can cause permanent damage, and is a major bummer when all you were trying to do was remove that coffee splatter.

Turn your computer off. A black screen makes spotting smudges and oil schmears easier, but merely putting your computer to sleep isn’t enough. Powering your computer down ensures you don’t damage its pixels while they’re still firing electricity and also eliminates the risk of electric shock or even fire.

Use a microfiber cloth. Never use a paper towel, old t-shirt, or napkins to clean your computer monitor. At worst, the fibers in these materials may scratch the surface of your screen and at best, they’ll leave a trail of lint. Instead, use a microfiber cloth, which is made up of a super soft synthetic material that won’t cause any damage to your screen, and will wipe away debris beautifully.

Wipe gently. Use a gentle, circular motion to wipe your screen clean. For any tough food particles or debris, a repeated circular motion may help do the trick. If not, skip to the next method which will show you how to make a homemade cleaning solution. It bears repeating, never spray your screen directly with cleaners, or soap and water.

Clean the frame and base. The only areas of your monitor that can withstand multi-purpose cleaners are the frame and base of your computer. Very carefully, lightly spray a paper towel with the cleaner (don’t soak it!) and run it along the frame and base. Never apply the paper towel to the actual screen of your computer.

Turn your computer off. For this method, the first step is to again power down your computer so that you can easily see all the debris on its screen AND so that you don’t inadvertently cause damage or burnout to the pixels.

Make a cleaning solution. The first and easiest cleaner you should try is distilled water, which doesn’t contain any chemicals. If your screen needs something stronger, mix ¼ cup distilled water and ¼ cup white vinegar in a spray bottle. If you don’t have white vinegar, a ¼ cup of distilled water and a ¼ of rubbing alcohol will do the trick, too. This simple solution can be used on many household items, from windows to shower doors .

Spray the microfiber cloth. Spray your cleaner onto a clean microfiber towel. Never spray the screen directly or you risk component failure or electrical shock.

Cleaning your computer screen will provide the much-needed physical (and mental!) cleansing you so desperately deserve. If you’re on a laptop, you can rest assured you won’t offend anyone at the coffee shop or in the conference room with splatters from last week’s roast beef sandwich. If you’re on a desktop computer, a clean screen could be just what you need to feel at home in your home office. And if that doesn’t do the trick, hey, maybe try washing the walls. Either way, cleaning your monitor is a win-win.