raspberry pi 2.2 tft lcd manufacturer

Use this 2.2" Color TFT LCD Display to add a vibrant color display to your Raspberry Pi projects. Just wire up your display and use the SPI protocol to communicate with your TFT. This is more advanced than our Raspberry Pi LCD shields since you have to wire using a breadboard and use the fbtft Raspberry Pi Library when configuring so we recommend it for intermediate users.

For Arduino users, this display is also Arduino compatible however we recommend our 11 Pin 2.2" TFT LCD Display which can be plugged directly into an Arduino UNO or Mega so you don"t have to use a breadboard.

ER-TFTM022-1 is 240x320 dots 2.2" color tft lcd module display with ILI9341 controller board,superior display quality,super wide viewing angle and easily controlled by MCU such as 8051, PIC, AVR, ARDUINO,ARM and Raspberry PI.It can be used in any embedded systems,industrial device,security and hand-held equipment which requires display in high quality and colorful image.

It supports 8080 8-bit /9-bit/16-bit /18-bit parallel ,3-wire,4-wire serial spi interface.Built-in optional microSD card slot,touch panel controller and 2.2 inch 4-wire resistive touch panel. It"s optional for font chip, flash chip and microsd card. We offer two types connection,one is pin header and the another is ZIF connector with flat cable mounting on board by default and suggested. Lanscape mode is also available.

Of course, we wouldn"t just leave you with a datasheet and a "good luck!".Here is the link for 2.2"TFT Touch Shield with Libraries, EXxamples.Schematic Diagram for Arduino Due,Mega 2560 and Uno . For 8051 microcontroller user,we prepared the detailed tutorial such as interfacing, demo code and development kit at the bottom of this page.

PO Box, APO/FPO, Afghanistan, Alaska/Hawaii, Algeria, American Samoa, Angola, Armenia, Azerbaijan Republic, Bahrain, Bangladesh, Benin, Bermuda, Bhutan, Botswana, Burkina Faso, Burundi, Cambodia, Cameroon, Cape Verde Islands, Central African Republic, Chad, China, Comoros, Cook Islands, Côte d"Ivoire (Ivory Coast), Democratic Republic of the Congo, Djibouti, Equatorial Guinea, Eritrea, Ethiopia, Falkland Islands (Islas Malvinas), Fiji, French Guiana, French Polynesia, Gabon Republic, Gambia, Georgia, Ghana, Guam, Guernsey, Guinea, Guinea-Bissau, Guyana, Hong Kong, Iraq, Jersey, Jordan, Kazakhstan, Kenya, Kiribati, Kuwait, Kyrgyzstan, Laos, Lebanon, Lesotho, Liberia, Libya, Macau, Madagascar, Malawi, Maldives, Mali, Marshall Islands, Mauritania, Mauritius, Mayotte, Micronesia, Mongolia, Morocco, Mozambique, Namibia, Nauru, Nepal, New Caledonia, Niger, Niue, Oman, Pakistan, Palau, Papua New Guinea, Qatar, Republic of the Congo, Reunion, Russian Federation, Rwanda, Saint Helena, Saint Pierre and Miquelon, Saudi Arabia, Senegal, Seychelles, Sierra Leone, Solomon Islands, Somalia, Sri Lanka, Suriname, Swaziland, Tajikistan, Tanzania, Togo, Tonga, Tunisia, Turkmenistan, Tuvalu, US Protectorates, Uganda, Ukraine, United Arab Emirates, Uzbekistan, Vanuatu, Vietnam, Wallis and Futuna, Western Sahara, Western Samoa, Yemen, Zambia, Zimbabwe

High PPI 2.2 inch TFT Display Shield for Raspberry Pi 3B/2B/B+/A+ With 6 Keyboards and Remote IR; It’s fit to raspberry pi 3 model B 2B/B+/A+; with 6 customized button, with IR function. you can customize your button function for your application.

Now, this LCD support dual screen display, you can display on this LCD or other HDMI display screen (such as your desktop display) together, but you must use the image from us. The download link of Image:https://osoyoo.com/driver/2016-02-26-raspbian-jessie-2fb.7z

step 1:Down the image file fromhttps://osoyoo.com/driver/2016-02-26-raspbian-jessie-2fb.7zor https://osoyoo.com/driver/2015-09-24-raspbian-jessie-pitft.7z, write the Image to micro SD card, after installing the system image to your SD card . wait for a minutes, the LCD can display.

This lovely little display breakout is the best way to add a small, colorful, and bright display to any project. Since the display uses 4-wire SPI to communicate and has its own pixel-addressable frame buffer, it can be used with every kind of microcontroller. Even a very small one with low memory and few pins available!

The 2.2" display has 320x240 color pixels. Unlike the low-cost "Nokia 6110" and similar LCD displays, which are CSTN type and thus have poor color and slow refresh, this display is a true TFT! The TFT driver (ILI9341 or compatible) can display full 18-bit color (262,144 shades!). And the LCD will always come with the same driver chip so there are no worries that your code will not work from one to the other.

The breakout has the TFT display soldered on (it uses a delicate flex-circuit connector) as well as an ultra-low-dropout 3.3V regulator and a 3/5V level shifter so you can use it with 3.3V or 5V power and logic. We also had a little space so we placed a microSD card holder so you can easily load full-color bitmaps from a FAT16/FAT32 formatted microSD card. The microSD card is not included, but you can pick one up here.

Of course, we wouldn"t just leave you with a datasheet and a "good luck!" - we"ve written a full open-source graphics library that can draw pixels, lines, rectangles, circles, text, and bitmaps as well as example code. The code is written for Arduino but can be easily ported to your favorite microcontroller! Wiring is easy, we strongly encourage using the hardware SPI pins of your Arduino as software SPI is noticeably slower when dealing with this size display. Check the example sketches for wiring help until we get a detailed wiring tutorial written!

This display breakout also features a 18-pin "EYESPI" standard FPC connector with flip-top connector. You can use a 18-pin 0.5mm pitch FPC cable to connect to all the GPIO pins, for when you want to skip the soldering.

As of November 2022 - we"ve updated this TFT breakout with a EYESPI connector to make cabling easier with an 18-pin FPC. We also used Adafruit Pinguin to make a lovely silkscreen. The board is otherwise the same size, pinout, and functionality.

Here at Pi Supply, we have our roots in the open-source and educational values provided by the open source community. The Raspberry Pi is such a fantastic educational tool, and these kits open up even more possibilities for anyone to learn about electronics and programming.

Inside this part of the shop you can find all the bits and pieces you need for your prototyping needs. Here you can kit out your maker station with tools and consumables, as well as other components such as headers, sensors and accelerometers to bring all those epic ideas to life!

Here you can find the range of everyone"s favourite single board computer! The revolutionary Raspberry Pi has brought more possibilities within the grasp of developers than ever before, and here you can get your hands on the board that will bring that next idea to life. The Raspberry Pi has come to us in many shapes and sizes, but whichever model you want or need, this platform is guaranteed to pack a punch!

Take a look at all the original products we have to offer here at Pi Supply! Whether you are looking for self-solder kits or fully assembled HATs, you can explore new horizons with Pi Supply, and do even more to unlock the potential of your Raspberry Pi. Check out our range for LED & IR toys, ePaper applications, power solutions and much more to expand your range of projects.

The PI-TFT22A module features a 2.2"display with 320x240 16-bit color pixels. This PI-TFT22A module refresh it"s screen rapidly because the TFT module communicates with raspberry Pi in a high speed SPI interface ,this PI-TFT22A module can be used as Xwindow port ,displaying images or video etc. it plugs right in on top of your Model A+, B+ or Pi 2 and fits as HAT.

You can download configuration-free image or configurable packages, adjustable brightnes [level 0 -255], HAT compatible and Onboard buttons, you can load kernel modules to support GPIO KeyBoard function, almost all GPIO available on this board [non SPI 0,GPIO 18,GPIO 24,GPIO23],Very easily be other uses, IDROM has built initialization data to support Device Tree boot

This awesome little display breakout is a great way to add a small, colorful and bright display to any project. Since the display uses 4-wire SPI to communicate and has its own pixel-addressable frame buffer, it can be used with every kind of microcontroller. Even a very small one with low memory and few pins available!

This 2.2″ display has 320×240 color pixels and is a true TFT display. The TFT driver (ILI9340 or compatible) can display full 18-bit color (262,144 shades). The breakout has the TFT display soldered on (it uses a delicate flex-circuit connector) as well as a ultra-low-dropout 3.3V regulator and a 3/5V level shifter so you can use it with 3.3V or 5V power and logic. Adafruit also had a little extra space on the back so there is a microSD card holder for easily loading full-color bitmaps from a FAT16/FAT32 formatted microSD card.

The Adafruit 2.2″ TFT LCD with MicroSD Card also features an EYESPI connector for a simpler connection to the LCD. EYESPI is a single 18-pin FPC used as a quick way to connect displays.

All fans of Raspberry Pi perfectly understand the phenomenon of Raspberry, which has enthusiasts in many areas. It is used in everyday life, but also in robotics, programming and industry. Raspberry Pi is perfect for modern intelligent building systems. It can be expanded with various types of peripheral devices, acquiring specific features. Among them there are displays, which are available in our offer in different versions. They come in 0.9", 1.3", 1.44", 1.54", 2", 2", 2.13", 2.2", 2.4", 2.6", 2.7", 2.8", 3.2", 3.5", 4", 4.,2", 4.3", 5", 5.83", 7", 7.50", 10", 10.1", 11.1" and 14" screens. They also differ in the technology used, which ensures a specific image quality. We offer LED and OLED matrix displays, monochrome and segmented, consisting of LEDs, e-paper, alphanumeric displays as well as LCD IPS, LCD TFT. The displays work with boards using GPIO+DPI, HDMI, HDMI+GPIO, HDMI+USB, DSI, GPIO, I2C, SPI, SPI + I2C, as well as USB. The interface through which the screen connects to the Raspberry Pi module must be operable, otherwise there is a risk of interference and the connection quality will be poor.

We offer screens dedicated for special housings as well as modular laptops based on Raspberry Pi. If you use the display and your Raspberry frequently, an e-paper display is a good choice for you, which is more convenient for human eyesight. It has other advantages, it is very energy-efficient, consumes little energy, so it will be a good choice for those who are still looking for savings, while increasing the comfort of their daily life.

The displays can be used on a daily basis as well as for large robotics and electrical projects. They can be used for information purposes, displaying current data with the parameters of the specific equipment or system with which they work. This function is very often performed by monochrome and segment displays. Or maybe you would like to create your own e-book reader. You will need an energy-saving and eye-safe e-paper display. Touchscreens are very well suited for game controllers and drawing devices. The use of Raspberry Pi displays is therefore very wide.

Adjust the type of display to your design and purpose. Decide on the option that best matches your expectations and needs. Build your Raspberry Pi, make an ambitious project or simply use the Raspberry Pi as an alternative to your laptop or iconic PC.

Create portable projects by adding a TFT screen to your Raspberry-Pi. Small, wide, touch screen, HDMI based, DSI based or GPIO"s based screens are availables from this categoy. All you need to transform your beloved Pi in an attractive, portable and interactive object. Exceptional add-on for an exceptional plateform.

We will endeavour to ship the Products by the applicable time indicated on the website, but all times are indicative only.  All shipping times are dispatch times only, and actual delivery dates will depend on the shipping method chosen, delivery address and delivery service provider.

*Go to Australia post delivery time calculation to get various Australia post service in your area please use our shipping postcode Rosanna, 3074 as the "from" address - https://auspost.com.au/parcels-mail/delivery-times.html?ilink=tools-open-deliv-times.Shipping Destinations