brother printer lcd screen replacement manufacturer

Check this page from printcopy.info to see all the parts you might need. The referenced part above appears to be the Touch Panel Assembly only, and there is an LCD also just in case your LCD is cracked too.

Verify the power cord is connected to the back of the machine and the AC power outlet. If the power cord is connected to a surge protector or power switch, remove the cord from the device and connect it directly to the outlet. This is for testing purposes. Removing the device assists in determining if the issue is related to the device or the Brother machine.

Verify the machine is powered ON. The Brother machine has an ON/OFF button located on control panel of the machine. If machine is OFF, the display will be blank.

If the display is still blank, try to tilt or move up or down the LCD display and also try a different known working electrical outlet at your location.

4. When the screen is blank but power LED light is on, this is a sign the firmware has been corrupted. This can happen if power or network connection is interrupted before the end of the firmware update. The firmware can be recovered provided the printer is connected to a computer via printer USB cable and the computer shows the printer is connected.

Round-the-clock printing at riveting speeds. Refreshingly easy drop-in integrations. And all the printers and accessories you need with super-affordable pricing and subscription options. All backed by unmatched support that’s “at your side” for life1. Meet the industrial barcode printers that will push the boundaries of what you can accomplish.

Get a standard 2-year limited warranty on the printer and the printhead3, responsive, lifetime customer support1, plus replacement printheads at up to 56% off the list price while your machine is under warranty5.

Choose from LCD, touch panel, or two-button control panels to make set-up and selections a breeze. Get WMS and ERP compatibility. Even select models with built-in full roll rewinders.Which model is best for you?

This personal labeling system is perfect for general home use. If you want an adhesive-backed label without the need for durable laminated labels, PT-65 is for you. With its compact, handheld design it can be used for virtually any application from the kitchen to the family room to the home/office. Coupled with its large LCD display, this is a P-touch system your home can’t do without.

Locate the chip. It’s a tiny green circuit board about the quarter of the size of a postage stamp. They are often located on the front or bottom of your printer cartridge.

Clearing the memory can give you a more accurate idea of your printer’s ink levels, the number of pages still available to print, and other valuable printing information.

Don’t make the same mistake with your printer’s ink levels. (If you stain your hands or clothes while refilling, turn that frown upside down! Here’s how to clean up!)

Shake your cartridge. The first thing you should try with an HP LaserJet cartridge that’s supposedly empty. This old-school trick will free up the toner particles that are stuck to the inside walls and nooks. After you mount it back to your printer, it may register it as full. You may need to deactivate the ink-saving mode for the printer to detect toner levels properly.

Install an HP chip to a replacement cartridge. This requires some fine motor skills and good tools. You’ll also possibly need to turn off toner level monitoring on the printer.

Get an aftermarket chip for a refilled cartridge. The majority of modern HP toner cartridges are equipped with a small chip that communicates toner levels to the printer.

Canon printers have thermal printheads. The ink actually cools the print heads down, and if you run empty cartridges the print heads can overheat and get damaged.

So, if you replace and remove the four Canon cartridges, and, on the fifth attempt, install a newly refilled cartridge, the printer should accept the cartridge, and ink levels should read as full.

Another warning will pop up on the printer’s screen detailing that you are using refilled or third-party cartridges and may void the printer’s warranty.

Each time you install a refilled or third-party cartridge you will need to follow the on-screen instructions to disable the Lexmark ink monitoring software.