elegoo tft lcd shield for sale

Thank you for your purchase. We hope you are happy with your purchase. However, if you are not completely satisfied with your purchase for any reason, ELEGOO provides a straightforward warranty that is processed in the most hassle-free way possible. Please refer to the chart below for the warranty timelines of various products, as warranty periods differ according to models.

To return an item, please email customer service at service@elegoo.com / euservice@elegoo.com to obtain the address information you need regarding of returning the products. Please place the item securely in its original packaging, and mail your return through a trackable method.

When contacting our customer service team, buyer must provide sufficient proof of purchase (order number from online purchases made through ELEGOO, Amazon or other ELEGOO"s authorized resellers), tell us which product you purchased, and describe the problem as clearly as possible through text, images or short videos. This will help our team to process your inquiries and help you solve the problems more efficiently.

Thank you for your purchase. We hope you are happy with your purchase. However, if you are not completely satisfied with your purchase for any reason, ELEGOO provides a straightforward warranty that is processed in the most hassle-free way possible. Please refer to the chart below for the warranty timelines of various products, as warranty periods differ according to models.

To return an item, please email customer service at service@elegoo.com / euservice@elegoo.com to obtain the address information you need regarding of returning the products. Please place the item securely in its original packaging, and mail your return through a trackable method.

When contacting our customer service team, buyer must provide sufficient proof of purchase (order number from online purchases made through ELEGOO, Amazon or other ELEGOO"s authorized resellers), tell us which product you purchased, and describe the problem as clearly as possible through text, images or short videos. This will help our team to process your inquiries and help you solve the problems more efficiently.

Can this 2.8" elegoo display play video at all? I"m trying to make a unit that an older woman, in her 80"s can play a video on it, if I set it up correctly? This is for a really good cause, I desperately need help, this is super important. Helping elderly folks with modern technology is tough. But I really need it to be able to play a video off the SD card if possible. Any help would be super highly appreciated.ReplyUpvote

Hello,please post our code also ..the screen driver must be known and that info must be known in order to get these things to work correctly..you show your code and then the vid blurs..Someone needs to write a pdf teaching how ,what ,when and why concerning these screens I would gladly pay $10.00 and I am sure others would too.I have 3 different tftlcds only 1 works its for the mega and Bomer has a lib for it,I am really considering use of Nextion units from now on 4 pins easy programming but higher cost...also the small cell phone screens use spi mode and are real easy to set up and use

The program runs and nothing is displayed but a white screen. when I open the COM4 I see that when I hit the screen numbers appear to calibrate the screens position so it is registering but not showing up on the LCD. please help me before I pull all my hair out.1

I"m having issues getting this display to work on my Arduino 101 board with the libraries that are suggested - errors in compiling seem to indicate that the board type isn"t supported in the Adafruit_TFTLCD library. Here"s a representative error:

I finally got the touchscreen to work correct using your links to the libraries. Found out that this specific TFT display module uses pin 6 & 7 for touch sensor, instead of the standard 4 & 5.0

I never received a response on this, so went through the painful process of copying code from the video. It can be found here for others that might need it. Not that this has some minor changes, but is fully functional and I will continue to refine: https://github.com/siliconghost/Arduino_2.8in_TFT_wSD

/*==============================================================* Created by Ing. Piero Cimule Troise* Contact Info: piero.cimule@gmail.com* IG: @skylinkCE* Weather Station Components:* ELEGO 2.8" TFT Tounch Screen Shield* Arduino Mega 2560 Board* Jumpers & Wires* DTH11 Temperture & Humidity Sensor* BreadBoard*// IMPORTANT: Elegoo_TFTLCD LIBRARY MUST BE SPECIFICALLY// CONFIGURED FOR EITHER THE TFT SHIELD OR THE BREAKOUT BOARD.*==============================================================*/// Libraries Declaration#include // Core graphics library#include // Hardware-specific library#include // Touch Screen Library//#include //Adafruit Library Sensor#include //DTH Library#include //DTH Library// The control pins for the LCD can be assigned to any digital or// analog pins...but we"ll use the analog pins as this allows us to// double up the pins with the touch screen (see the TFT paint example).#define LCD_CS A3 // Chip Select goes to Analog 3#define LCD_CD A2 // Command/Data goes to Analog 2#define LCD_WR A1 // LCD Write goes to Analog 1#define LCD_RD A0 // LCD Read goes to Analog 0#define LCD_RESET A4 // Can alternately just connect to Arduino"s reset pin// Color definitions#define BLACK 0x0000 /* 0, 0, 0 */#define NAVY 0x000F /* 0, 0, 128 */#define DARKGREEN 0x03E0 /* 0, 128, 0 */#define DARKCYAN 0x03EF /* 0, 128, 128 */#define MAROON 0x7800 /* 128, 0, 0 */#define PURPLE 0x780F /* 128, 0, 128 */#define OLIVE 0x7BE0 /* 128, 128, 0 */#define LIGHTGREY 0xC618 /* 192, 192, 192 */#define DARKGREY 0x7BEF /* 128, 128, 128 */#define BLUE 0x001F /* 0, 0, 255 */#define GREEN 0x07E0 /* 0, 255, 0 */#define CYAN 0x07FF /* 0, 255, 255 */#define RED 0xF800 /* 255, 0, 0 */#define MAGENTA 0xF81F /* 255, 0, 255 */#define YELLOW 0xFFE0 /* 255, 255, 0 */#define WHITE 0xFFFF /* 255, 255, 255 */#define ORANGE 0xFD20 /* 255, 165, 0 */#define GREENYELLOW 0xAFE5 /* 173, 255, 47 */#define PINK 0xF81F#define YP A3 // must be an analog pin, use "An" notation!#define XM A2 // must be an analog pin, use "An" notation!#define YM 9 // can be a digital pin#define XP 8 // can be a digital pin//Touch For New ILI9341 TP#define TS_MINX 120#define TS_MAXX 900#define TS_MINY 70#define TS_MAXY 920#define MINPRESSURE 10#define MAXPRESSURE 1000//Screen DeclarationElegoo_TFTLCD tft(LCD_CS, LCD_CD, LCD_WR, LCD_RD, LCD_RESET);//TouchScreen Area DeclarationTouchScreen ts = TouchScreen(XP, YP, XM, YM, 300);//Button object declarationElegoo_GFX_Button buttons;//Custiom Variablesuint16_t identifier; //Store Screen Identifier#define DHTPIN 52 //what pin we"re connected to DTH Sensor#define DHTTYPE DHT11 //DHT 11DHT dht(DHTPIN, DHTTYPE); //DTH Object Declaration//Variablesunsigned long startMillis; //some global variables available anywhere in the programunsigned long currentMillis;const unsigned long period = 5000; //the value is a number of millisecondsint tempUnit; //Temperature Unit "1" Celsius "2" Farenheitint currentPage; //Current Page indicator "1" First Page, "2" Second Pagevoid setup(void) {dht.begin();Serial.begin(9600);Serial.println(F("WEATHER Station"));Serial.print("TFT size is "); Serial.print(tft.width()); Serial.print("x"); Serial.println(tft.height());drawInitialScreen();// TEMP UNIT BOXtempUnit = 0; // Celsius DefaultcurrentPage = 1; // First Page DefaultdrawTempetarure(); // Draw Temperature BoxreadTempSensor(); // Read DHT11 SensorstartMillis = millis(); //initial start time}void loop() {//Start Timing to next temperature readcurrentMillis = millis();if (currentMillis - startMillis >= period){readTempSensor();startMillis = currentMillis; //IMPORTANT to save the start time of the current .}//TouchScreen DefinitionTSPoint p = ts.getPoint();//if sharing pins, you"ll need to fix the directions of the touchscreen pinspinMode(XP, OUTPUT);pinMode(XM, OUTPUT);pinMode(YP, OUTPUT);//Touch Screen Reviewif (p.z > MINPRESSURE && p.z < MAXPRESSURE) {Serial.print("PRESSURE: "); Serial.println(p.z);// scale from 0->1023 to tft.widthp.x = map(p.x, TS_MINX, TS_MAXX, tft.width(), 0);p.y = (tft.height() - map(p.y, TS_MINY, TS_MAXY, tft.height(), 0));//Print TouchScreen area seletedSerial.print("P X"); Serial.print(p.x);Serial.print("P Y"); Serial.print(p.y);if (p.x >= 145 && p.x <= 245 && p.y >= 110 && p.y <= 220 && currentPage == 1) {Serial.println("Change Temperature Unit Box"); Serial.println(tempUnit);if (tempUnit == 0) {tempUnit = 1;drawTempetarure();}else {tempUnit = 0;drawTempetarure();}readTempSensor();}else if (p.x >= 15 && p.x <= 40 && p.y >= 80 && p.y <= 220 && currentPage == 1) {Serial.println("Next Page Selected");currentPage = 2;drawDetailScreen();readTempSensor(); // Read DHT11 Sensor}else if (p.x >= 5 && p.x <= 30 && p.y >= 12 && p.y <= 55 && currentPage == 2) {Serial.println("Next Page Selected");tempUnit = 0; // Celsius DefaultcurrentPage = 1; // First Page DefaultdrawInitialScreen();drawTempetarure(); // Draw Temperature BoxreadTempSensor(); // Read DHT11 Sensor}}}void drawInitialScreen() {tft.reset();getIdentifierScreen();tft.begin(identifier);tft.setRotation(3);tft.fillScreen(BLACK);tft.setCursor(30, 10);tft.setTextColor(RED); tft.setTextSize(3);tft.println("WEATHER Station");tft.drawLine(10, 40, 310, 40, CYAN);// TEMP & HUMD Boxtft.drawRect(10, 45, 125, 185, BLUE);tft.setCursor(15, 50);tft.setTextColor(CYAN); tft.setTextSize(2);tft.println("TEMP:");tft.setCursor(15, 140);tft.println("HUMIDITY:");// DIVIDERS LINEStft.drawLine(140, 45, 140, 230, CYAN);tft.drawLine(145, 130, 310, 130, BLUE);tft.drawLine(145, 135, 310, 135, CYAN);//BUTTON NEXT PAGE// create buttons//CLASSBUTTON[index].initButton( &tft, BUTON_X_pos, BUTTON_Y_pos, X_WIDTH, Y_LARGE, BORDER_COLOR, TEXT_COLOR, BUTTON_COLOR, TEXT, FONT_SIZE );buttons.initButton( &tft, 275, 210, 70, 30, DARKGREY, WHITE, DARKGREY, "Detail", 1 );buttons.drawButton(true);}void drawDetailScreen() {tft.reset();getIdentifierScreen();tft.begin(identifier);tft.setRotation(3);tft.fillScreen(BLACK);tft.setCursor(50, 10);tft.setTextColor(RED); tft.setTextSize(3);tft.println("Weather Detail");tft.drawLine(10, 40, 310, 40, CYAN);tft.setCursor(100, 50);tft.setTextColor(GREEN); tft.setTextSize(2); tft.println("Temperature");// DIVIDERS LINEStft.drawLine(160, 70, 160, 230, CYAN);tft.drawLine(10, 135, 310, 135, CYAN);tft.setCursor(40, 140);tft.setTextSize(2); tft.println("Humidity");tft.setCursor(180, 140); tft.println("Heat Index");//BUTTON PREVIOUS PAGE// create buttons//CLASSBUTTON[index].initButton( &tft, BUTON_X_pos, BUTTON_Y_pos, X_WIDTH, Y_LARGE, BORDER_COLOR, TEXT_COLOR, BUTTON_COLOR, TEXT, FONT_SIZE );buttons.initButton( &tft, 50, 220, 70, 30, DARKGREY, WHITE, DARKGREY, "Previous", 1 );buttons.drawButton(true);}void getIdentifierScreen() {identifier = tft.readID();if (identifier == 0x9325) {Serial.println(F("Found ILI9325 LCD driver"));} else if (identifier == 0x9328) {Serial.println(F("Found ILI9328 LCD driver"));} else if (identifier == 0x4535) {Serial.println(F("Found LGDP4535 LCD driver"));} else if (identifier == 0x7575) {Serial.println(F("Found HX8347G LCD driver"));} else if (identifier == 0x9341) {Serial.println(F("Found ILI9341 LCD driver"));} else if (identifier == 0x8357) {Serial.println(F("Found HX8357D LCD driver"));} else if (identifier == 0x0101){identifier = 0x9341;Serial.println(F("Found 0x9341 LCD driver"));} else {identifier = 0x9341;}}void drawTempetarure() {tft.fillRect(145, 45, 166, 85, BLUE);tft.setCursor(210, 50);tft.setTextColor(RED); tft.setTextSize(7);Serial.println(tempUnit);if (tempUnit == 0) {tft.println("C");tft.setCursor(205, 120);tft.setTextSize(1);tft.println("Celsius");}else {tft.println("F");tft.setCursor(195, 120);tft.setTextSize(1);tft.println("Fahrenheit");}tft.setCursor(190, 50);tft.setTextSize(2);tft.println("o");}void readTempSensor() {// Reading temperature or humidity takes about 250 milliseconds!// Sensor readings may also be up to 2 seconds "old" (its a very slow sensor)float h = dht.readHumidity();// Read temperature as Celsius (the default)float t = dht.readTemperature();// Read temperature as Fahrenheit (isFahrenheit = true)float f = dht.readTemperature(true);// Check if any reads failed and exit early (to try again).if (isnan(h) || isnan(t) || isnan(f)) {Serial.println(F("Failed to read from DHT sensor!"));return;}// Compute heat index in Fahrenheit (the default)float hif = dht.computeHeatIndex(f, h);// Compute heat index in Celsius (isFahreheit = false)float hic = dht.computeHeatIndex(t, h, false);if (currentPage == 1) {//Draw blue window for Temptft.drawRect(10, 45, 125, 185, BLUE);tft.setTextColor(CYAN); tft.setTextSize(3);if (tempUnit == 0) {//Shows Temperature in Celsiustft.setCursor(15, 70);tft.fillRect(15, 70, 110, 70, BLACK);tft.println(t);}else {//Shows Temperature in Farenheittft.setCursor(15, 70);tft.fillRect(15, 70, 110, 70, BLACK);tft.println(f);}tft.setCursor(15, 160);tft.fillRect(15, 160, 110, 50, BLACK);tft.println(h);tft.setCursor(110, 160);tft.println("%");} else {tft.setTextColor(CYAN); tft.setTextSize(3);//Shows Temperature in Celsiustft.setCursor(30, 80);tft.fillRect(30, 80, 120, 30, BLACK);tft.println(t);tft.setCursor(130, 80); tft.println("C");//Shows Temperature in Farenheittft.setCursor(190, 80);tft.fillRect(190, 80, 120, 30, BLACK);tft.println(f);tft.setCursor(290, 80); tft.println("F");//Shows Humiditytft.setCursor(30, 170);tft.fillRect(30, 170, 120, 30, BLACK);tft.println(h);tft.setCursor(130, 170); tft.println("%");//Shows Heat Indextft.setTextColor(ORANGE); tft.setTextSize(2);tft.setCursor(210, 170);tft.fillRect(210, 170, 100, 30, BLACK);tft.println(hif); tft.setCursor(280, 170); tft.println("F");tft.setCursor(210, 200);tft.fillRect(210, 200, 100, 30, BLACK);tft.println(hic); tft.setCursor(280, 200); tft.println("C");}/*//Print DTH11 ValuesSerial.print(F("Humidity: "));Serial.print(h);Serial.print(F("% Temperature: "));Serial.print(t);Serial.print(F("°C "));Serial.print(f);Serial.print(F("°F Heat index: "));Serial.print(hic);Serial.print(F("°C "));Serial.print(hif);Serial.println(F("°F"));*/}

Enclosure for Adafruit 2.8" TFT LCD with a GoPro mount on the rear for use with all of your GoPro accessories! The touchscreen is held in place with a separate fastening piece to ensure it does not move or rattle. Please note that this enclosure does...

Borrowed some parts from others and did this mock-up to share as I"m trying to model and build a 3D enclosure for a stack of shields. ... Pin headers and sockets may be off slightly.

I needed an accurate model of the 2.8" TFT shield for the Arduino. ...It was a bit of a challenge as these are not manufactured to the tightest tolerances so I added some standard deviation to the model so that it should fit most use cases.- Pinheader...

Case for the screen 2.8 inches 320x240 such as 240x320 2.8" SPI TFT LCD Touch Panel Serial Port Module With PBC ILI9341 2.8 Inch SPI Serial White LED Display with Touch Pen

A small mountable holder for a fasttech LCD module. Mounting pins are a little tight but can be snapped off if not needed. Mount holes are designed for assorted leg or spacer designs. Holes are 5mm dia, 34mm apart and hole centre 5.5mm from edge if...

"lcd hinge" is for behind the lcd. "base hinge" fits into the duo case pins and takes the lcd hinge shaft My hinge snapped when I tried to jam the shaft into it, blue pvc pipe glue visible on assembled photos.. ...does the job.

This is the first version of a case for a 2.2" SPI TFT LCD Display module. I have to add mount points to mount the display. Then I have to deside how to wire it.

This is a front case to hold and protect my SPI TFT 2.8" display (touchscreen display with the ILI9341 chip). ...It has some holes in the laterals to pass the wires and change the SD card.

As an example i used the color weather station of Dani Eichhorn - https://blog.squix.org/2016/10/esp8266-weather-station-color-code-published.html (Note I used a slightly different TFT, a TJCTM24024-SPI which has the same electronics but is 2.4"...

A small, thin and light 1.8 inch TFT LCD wall mount. The mount is composed out of two pieces, a wall bracket that screws into the wall (or other panel) and a cover which hides the screws and holds the display in place. To route the display cable you...

In this Arduino touch screen tutorial we will learn how to use TFT LCD Touch Screen with Arduino. You can watch the following video or read the written tutorial below.

As an example I am using a 3.2” TFT Touch Screen in a combination with a TFT LCD Arduino Mega Shield. We need a shield because the TFT Touch screen works at 3.3V and the Arduino Mega outputs are 5 V. For the first example I have the HC-SR04 ultrasonic sensor, then for the second example an RGB LED with three resistors and a push button for the game example. Also I had to make a custom made pin header like this, by soldering pin headers and bend on of them so I could insert them in between the Arduino Board and the TFT Shield.

Here’s the circuit schematic. We will use the GND pin, the digital pins from 8 to 13, as well as the pin number 14. As the 5V pins are already used by the TFT Screen I will use the pin number 13 as VCC, by setting it right away high in the setup section of code.

I will use the UTFT and URTouch libraries made by Henning Karlsen. Here I would like to say thanks to him for the incredible work he has done. The libraries enable really easy use of the TFT Screens, and they work with many different TFT screens sizes, shields and controllers. You can download these libraries from his website, RinkyDinkElectronics.com and also find a lot of demo examples and detailed documentation of how to use them.

After we include the libraries we need to create UTFT and URTouch objects. The parameters of these objects depends on the model of the TFT Screen and Shield and these details can be also found in the documentation of the libraries.

So now I will explain how we can make the home screen of the program. With the setBackColor() function we need to set the background color of the text, black one in our case. Then we need to set the color to white, set the big font and using the print() function, we will print the string “Arduino TFT Tutorial” at the center of the screen and 10 pixels  down the Y – Axis of the screen. Next we will set the color to red and draw the red line below the text. After that we need to set the color back to white, and print the two other strings, “by HowToMechatronics.com” using the small font and “Select Example” using the big font.

Or you can use the 6-bit RGB interface of ILI9341, in this mode the R/G/B pixels are output one after the other in 3 cycles, rather than at once; but LTDC does not natively support this mode. It can of course be emulated by setting the LTDC to 3x the real LCD"s width and using only 6 bits (any) out of the LTDC output.