3.2 tft lcd touch screen quotation

※ Price Increase NotificationThe TFT glass cell makers such as Tianma,Hanstar,BOE,Innolux has reduced or stopped the production of small and medium-sized tft glass cell from August-2020 due to the low profit and focus on the size of LCD TV,Tablet PC and Smart Phone .It results the glass cell price in the market is extremely high,and the same situation happens in IC industry.We deeply regret that rapidly rising costs for glass cell and controller IC necessitate our raising the price of tft display.We have made every attempt to avoid the increase, we could accept no profit from the beginning,but the price is going up frequently ,we"re now losing a lot of money. We have no choice if we want to survive. There is no certain answer for when the price would go back to the normal.We guess it will take at least 6 months until these glass cell and semiconductor manufacturing companies recover the production schedule. (Mar-03-2021)

ER-TFT032-2 is 240x320 dots 3.2 " color tft lcd module display with ILI9320 controller and optional 4-wire resistive touch panel,superior display quality,super wide viewing angle and easily controlled by MCU such as 8051, PIC, AVR, ARDUINO ARM and Raspberry PI.It can be used in any embedded systems,industrial device,security and hand-held equipment which requires display in high quality and colorful image.It supports 8080 16-bit parallel interface. .FPC is soldering type,there is no need for zif connector.Lanscape mode is also available.

SainSmart 3.2" TFT LCD Displayis a LCD touch screen module. It has 40pins interface and SD card and Flash reader design. It is a powerful and mutilfunctional module for your project.The Screen include a controller SSD1289, it"s a support 8/16bit data interface , easy to drive by many MCU like STM32 ,AVR and 8051. It is designed with a touch controller in it . The touch IC is ADS7843 , and touch interface is included in the 40 pins breakout. It is the version of product only with touch screen and touch controller.

As an option, you can order this TFT pre-assembled onto a breakout/carrier board. The board allows easy prototyping through its 0.1" headers. You can also include the carrier board in your end product to simplify construction and assembly. The carrier board contains a constant-current switching LED driver. The PCB is sized to fit neatly within the outline of the display, with a total weight of 51 grams.

This kit consists of a CFAF240320B1-032T-TS TFT LCD module mounted on a carrier board. The carrier board supports a current driver for the LED backlight of the display. It is available under Additional Options on the website page for CFAF240320B1-032T-TS.

A wide variety of 3.2 inch tft lcd module display options are available to you, You can also choose from original manufacturer, 3.2 inch tft lcd module display,As well as from tft, ips, and standard.

Raspberry Pi was designed explicitly for IoT hardware development and robotics application and many more memory hunger applications. In most of the electronics projects involving the Pi, it would be extremely delightful if the Pi had a display through which we can monitor the vitals of our project. 3.2 Inch TFT LCD Touch Screen for Raspberry Pi display is a colour active matrix TFT liquid crystal display with a resistive touch screen. The TFT display provides a resolution of 240×320 pixels with individual RGB pixel control, which is more in resolution than a black and white 128×64 display.

This 3.2 Inch TFT LCD Screen for Raspberry Pi V4.0 display has an ILI9341 controller IC which supports MCU Interface. This display ILI9341 controller IC is built into it with RAM buffering so that the microcontroller does almost no work. The controller features low power consumption on the backlight, providing brightness 180 cd/m2 with a contrast ratio of(typical value) 500: 1. XPT2046 3.2inch resistive touchscreen is attached already to the display, so we can detect finger presses anywhere on the screen. XPT2046 is a 4-wire resistive touch screen with a 12-bit 125kHz sampling SAR type A/D converter.

This 3.2 Inch TFT LCD Screen display works on SPI Protocol (serial peripheral interface) to communicate with the main processor. Without any external power source, it can be mounted directly to the GPIO pins. 3.2 Inch TFT LCD Touch Screen operates at a voltage is 2.5~3.3V. 3.2 inch TFT LCD Screen display designed specifically for Raspberry Pi Model 2B/B+ and is easy to use. It Supports the FBCP software driver as well, allows it to configure software resolution, and set up dual-display. These display modules are mounted with high-quality immersion gold surface plating. Thus providing high durability and flexibility.

Arduino 3.2"" TFT Touch Shield is an Arduino Mega compatible multicolored TFT display with a touch-screen and SD card socket. It is available in an Arduino MEGA shield compatible pinout for attachment. The TFT driver is based on SSD1289 with 16bit data and 4bit control interface.

Arduino 3.2" TFT LCD Touch shield is an Arduino Mega compatible multicolored TFT display with touch-screen and SD card socket. It is available in an Arduino MEGA shield compatible pinout for attachment. The TFT driver is based on SSD1289 with 8bit data and 4bit control interface.

4D Systems" uLCD-32032-P1T(SGC) is a feature-rich serial display module which combines a 3.2" TFT LCD with an integrated touch screen, uSD card socket, an audio amplifier, and more! Everything on this beautiful LCD can be easily controlled via a well defined serial interface.

Powerful graphics, text, image, animation and countless more features are built inside the module. It offers a simple yet effective serial interface to any host micro-controller that can communicate via a serial port. All screen related functions are sent using a simple protocol via the serial interface.