lcd touch screen not responding brands

Well, I would like to tell you that the touch screen not working or unresponsive touchscreen on Android is a common issue. And, this issue doesn’t only happen with Android, Apple users also experience the iPhone/iPad touchscreen not working issue.

So, if you have also come across the same issue and want to fix it then this blog is definitely for you. Here you will get to know about how to fix the touchscreen problem on Android?

To fix the Android touchscreen not working issue remove the SD card and SIM card, boot the phone in the safe mode, run antivirus scan, diagnose the phone display, and factory reset your phone. Well, these are not the only ways to deal with this issue. To find out the complete list of solutions, keep reading this guide.

If your Android device touch screen is not physically damaged or smashed and it had stopped working all of a sudden and does not respond to your touch, then this may be caused due to software issues.

If your phone’s touch screen is not working, then it is possible that this issue is appearing due to the system issue. In this situation, it is better to use the Android Repair Tool.

This tool will fix all of the system issues that might be causing this problem on your phone. Not just this, but it can also fix several other problems, such as the phone being stuck in the boot loop, apps crashing issues, black screen of death error, battery issues, and many more.

A soft resetting of the phone is a very basic move but in some cases, it works magically. If the phone touch screen not working is not happening due to any major issue, this trick may get your job done. Here’s how to fix unresponsive touch screen on Android:

Sometimes, the screen damage is not the actual reason for the unresponsiveness. There might be some issue with the memory card or SIM card. In this situation, you should try removing the SD or SIM card from your phone:

Though all Android device does not come with a removable battery feature. But, if your device provides a feature of a removable battery, then you must pull back your mobile back cover and remove the battery. Wait for 1 or 2 minutes and then re-insert the battery and Switch ON your phone.

If your Android device does not allow a battery removable feature, then there are some devices that offer an internal function for battery pull simulation. You can check online for tips on how to do this for your device model.

Mostly Android touch screen doesn’t work due to the screen protector. Even though a screen protector protects your phone’s screen from damage, dust, scratches, and water drops, it can also cause issues, such as the touchscreen not working.

If there is any scratch on the screen protector or is completely damaged, then thetouchscreen of your phone won’t respond. In this case, the best solution would be to remove the protector.

However, it will only work if the issue is happening due to the screen protector. If it is not working, then there must be some other issue with your phone screen. Hence, follow the other listed solutions.

It is a temporary solution to this issue, but you can use it until you find the actual reason or fix the issue permanently. You don’t only need to rely on the touch screen to control the phone. There are other options too to navigate through the phone.

You can try the 3-party apps to use the face or voice recognition feature to access your phone. However, this trick can only work if your phone touchscreen is at least partially working so that you can download the app.

To control the phone with the voice, you can use Google’s Voice Access app. This app will listen to your commands & assign a number for each action available on the phone screen. After this, you don’t need to tap on the screen.

Now, just call out the assigned number.Voice Access app also fixes the phrases for certain actions. For example, if you say go back, the app will take you back to the previous screen.

The EVA Facial Mouse app is a virtual cursor that can let you navigate through your phone using face recognition technology. To move the phone screen, simply move your phone in that direction.

If the above-given solutions failed for you, then you can try to boot your phone into Safe Mode to fix the problem. It will help you to recognize whether the touchscreen issue is caused due to any of the recently installed apps.

If your Android touchscreen works properly afterbooting the device into the Safe Mode, then it means the recent third-party app was a culprit behind this problem. Once you find out about the troublesome 3rd party app, simply uninstall it on your phone.

If your touch screen problem is not affecting your ability to download apps from the Play Store, then download and install an anti-malware application and scan your device. Maybe this can fix all your problems.

There are various apps available in the Play Store that can calibrate your device’s touch screen and improve its accuracy and responsiveness. These apps are very much effective particularly when your touch screen responds inaccurately or responds too slow.

Open Play Store, type “touch screen calibration” in the search bar and you will get a few results. Check the ratings and read the review carefully before you download them.

Wondering why my phone touchscreen is not working? If so, you should try 3rd party apps tofix display issues on your Android phone. There are so many apps on the Google Play Store that can diagnose the touchscreen problem of your phone.

These apps will help you to pinpoint what is wrong with your phone screen.For this, I recommend using the Display Tester. First, download and install the app on your device and then follow these instructions:

Here, you will get a bunch of options to test the issue from all aspects. With this tool, you can detectburn-in on OLED screens, dead pixels, the accuracy of saturation and contrast, multi-touch status, etc.

If the touch screen is totally unresponsive on an Android phone/tablet, then it is time to perform factory on the device. As doing this will erase all data on your Android device, you should only go with this option if nothing else is working out for you.

Before factory resetting the phone make sure to backup and restore Android data. Here, we are not doing a normal factory reset, you need to do it in the recovery mode.

If your Android phone or tablet screen has been physically damaged due to several reasons such as a dropped the device in water, on the floor from a high distance, smashing the screen, or breaking the device then the touch screen could be damaged and thus stop responding.

The first thing we are going to do is use the star codes to check if the touchscreen of the Android phone or tablet is working or not. First, dial the start codes compatible with your Android device.

After entering the codes, you can check the issue with the help of a 3rd party apps or software. Sometimes, this trick works and sometimes does not. Well, try it won’t hurt your phone, so you must try it.

Simply dial the codes, to open the device’s diagnostic mode. Once you enter into diagnostic mode, you can test the touchscreen for bugs and dead zones.

In this case, you can try one trick. Simply, knock each corner of the touch screen 2-3 times and then see if the Android unresponsive touchscreen issue has been resolved or not. If it is still not working, then you can try the next fixes.

There are some instances where the Android touch screen stopped responding after the phone is dropped into the water or due to some reason water drops gets inside the screen.

Nevertheless, you can still fix this problem and get your phone screen back to its normal working condition. For this, you must check out the guide on how to how to fix unresponsive touch screen on Android damaged by water.

This is a straightforward solution, if there is a hardware issue with your phone, then you don’t have any other option but to buy a new touchscreen for your phone.

There are some cases, where the phone touchscreen can be accessed partially. In this situation, the 3rd party apps can help you out in resolving the problem and enhancing the screen latency. There are so many apps that can calibrate the phone screen to decrease the response time.

This tool will suggest you click on several sections of the touchscreen. After doing this, the app will reduce the latency according to the phone model.

Many people ask how to fix unresponsive touch screen Android but before that, is important to know what are the reasons for the touch screen not working on Android, right?

Physical damage– Maybe your Android phone is damaged or broken. Or maybe it’s due to moisture detected issues, high temperature, static electricity, cold, etc can lead to touch screen damage on Android phones.

The Android touch screen is not working/became unresponsive? Now, wondering how to recover data from an unresponsive touch screen of an Android phone?

Don’t worry here is a solution for you!! Try the Android Data Recovery Tool. This is the best way to recover the data from an Android phone no matter if it is working or not.

You can use the user guide to find out how Android Data Recovery Toolworks in order to recover data from an Android device with an unresponsive touch screen.

Note: It is recommended to download and use the software on your PC or laptop. It is because recovery of phone data on the phone itself is risky as you may end up losing all your data because of data overriding.

Yes, the cracked screen affects the responsiveness of the touchscreen. When the phone screen gets cracked, the digitizer, an important component of the phone, starts interrupting the touch of the screen. But when the phone screen totally get damaged, the digitizer gets exposed to water, dust, moisturewhich leads to major damage.

If you see a phone’s screen then it has two major parts: the actual LCD and the glass. The glass of the screen can be replaced easily but when the LCD gets damaged the repairing of the device becomes a risky task.

There are ways to fix the cracked screen temporarily. You can use a screen protector or tape to fix it. First, clean the phone screen as much you can and put packaging tape over the screen. If there is some extra tape then remove it. And now you can use the phone as before but remember, it’s a temporary fix.

Though the most Android phone touchscreen issue can be solved by removing the screen protector and cleaning the screen with a soft, slightly damp, lint-free cloth. but if that doesn’t work, you can try the other ways shared in this blog to solve how to fix unresponsive touch screen Android phone issue.

On the other, you may also lose your important and valuable data from your device, hence it is recommended that you must try Android Data Recovery Softwareto recover data from an Android device whose touch screen is not working or became unresponsive.

We"ve all been there. Tapping, swiping or zoom-pinching, there"s often a moment when the touchscreen display on your tablet refuses to respond. How do you overcome this, and achieve tablet-tapping Zen?

As the primary mode of interaction between you and your apps, the tablet touchscreen is vitally important. Any damage inflicted – knocks to the device, scratches or worse – will degrade the touchscreen. Short of paying for a replacement, you will need to make sure the display is kept safe and intact.

The following tips – also suitable for smartphones – will help you resolve your tablet"s touchscreen responsiveness issues. We"ve designed this guide for all touchscreen tablet computers. So, if your Android tablet touchscreen is not working, or your device uses iOS, or Windows, the answers you need are right here.

Perhaps the best place to start in troubleshooting screen responsiveness issues is to make more system RAM available. This may take a moment but should give you an idea of how bad the problem is.

If your Microsoft Surface touchscreen is not working, or you use a different Windows 10 tablet, close as many desktop apps as is practical can before switching to the Start screen. Then:

Restarting a tablet isn"t a case of just tapping the power button to turn the screen off. Instead, the whole device must be switched off and back on again.

After all, how do you fix an unresponsive touchscreen when most of your options are accessible through the screen? The answer is surprisingly simple: connect a mouse.

Knowing which area(s) of the touchscreen are failing to respond correctly can be useful in diagnosing what is wrong. This information would prove useful to any engineer who ends up repairing the tablet.

On Android, free calibration and testing apps are available. Touch Screen Test is a good app that helps you find specific areas where input is not detected.

For devices that are in warranty, this means contacting the manufacturer and arranging a return, or dropping into a store. iPads, for example, can be taken to Apple Stores; Samsung tablets can similarly be taken to Samsung stores. In some cases, doorstep repairs are possible, where the device is repaired in a mobile Samsung-approved workshop parked outside your home. If your Samsung tablet touchscreen is not working, this fast-repair option might be available.

Whether you"re using a Samsung, LG, iPad, or your Lenovo tablet touch screen is not working, check your device manufacturer"s support pages to find the correct steps to arrange repair. Make it clear what steps you have attempted to resolve the touchscreen issues.

As noted above, if your tablet screen is cracked, it can impact touch reliability. Whether big or small, a cracked tablet screen will always fail eventually. Having your tablet looked at by an engineer under warranty is the smart option but isn"t always possible. If your tablet is out of warranty and the screen is cracked, you have two options:

Wondering how to repair a tablet touch screen yourself? For cheaper tablet models repair makes more sense than with premium brands. So, if you have a Vankyo, Onn, Yosatoo, Contixo, or Amazon Fire tablet with a screen that is not working or responding to touch, consider replacing the display yourself. Our guide to replacing a cracked Amazon Fire tablet display will help here.

Most problems can be avoided with care, a screen protector, and a case for your tablet. But where possible, avoid water and don"t get your tablet wet.

Touchscreens are a popular type of LCD module that can be found in various devices these days. These are used by manufacturers of smartphones, computers, laptops, ATMs, navigation systems, and point-of-sale-terminals, among other devices.

There are two types of touchscreen technology: resistive and capacitive. Resistive is the one that uses pressure to draw a response while capacitive relies on the human body’s electrical properties. Given this, it takes light pressure applied by a finger or stylus for the resistive touchscreen to work. On the other hand, capacitive touchscreens won’t respond unless it senses energy from the human body.

Knowing the different types of a touchscreen LCD display moduleisn’t enough in deciding which to choose for your project or business. You also need to understand the different problems encountered by each technology and be prepared to handle them.

Proper calibration allows the touchscreen technology to sense where the screen is being touched so that it can accord the command to a screen’s response. When the screen loses proper calibration, it will not be able to provide the correct response. Sometimes the screen will not even be able to detect a touch. This negates the device’s purpose for consumers. To fix this problem, the screen must be re-calibrated.

Since touchscreens are mostly engaged by fingers or other means that are exposed to foreign substances, it’s prone to being scratched or damaged. Dirt and grease transferred through touch or the stylus may also appear on the screen and affect its function. When the screen is damaged, it will not be able to provide accurate responses. Some parts of the screen may not even function at all. You can prevent this by using screen protectors and cleaning the device regularly.

Even if you’re taking good care of the screen, the system itself may develop problems over time. The device system may not be able to register user inputs or become slow and unresponsive with age. When this happens, you can try re-calibrating the screen and refreshing the system to see if it helps.

These problems are common with touchscreen technology, even with proper maintenance. The key is in understanding the causes of these problems so that you can prepare for them and know what to do when they are encountered.

I think I figured it out It may help try it. The ghost touches could be from a lose screen that has to be fix are software. But you would have to determine that by these steps. I figured the screen would either be messed up if you dropped it and the cable is lose are a defect and can cause ghost touches are screen scrolling are wacky things going on with your screen physically or could be static shock if you do not have a static free cover or your power adapter if it"s not original for the phone are a different kind can cause it as well all this I found out just doing everything I could think of that may cause this thing to act up. Unless you have a static free case or antishock case that may cause the problem as well. As I went a whole day without plugging in my charger after I done a few things that I will explain threw this whole thread that it did not act up one time with out plugging in my charger I used a charger for my samsung galaxy as it the same volts nothing different. There is a dead spot on the screen where no matter what you do it will not let you touch anything and it"s toward the top in a straight line across. Very seldom it will let you touch anything and I think it"s where the ghost touches are right in that spot.Now for software. No matter if you reset your phone from the hard reset if your signed up with google unless you go vanilla and not let google download everything you had on there again your in trouble if you do. For one it"s software problem that has not been fixed and for 2 when cutting on and off it stops sometimes that"s software. Now for the good part what others may find out is if you go in and reset your phone with just says reset to default instead of starting from scratch the phone doesn"t act up. This phone is very picky on what it wants on it. Also I found that it could be the facebook app causing it to do this!! I promise you once I reset my phone to default and deleted the facebook app I had no problems yet all day!! Because as I got notifications from facebook on my phone locked up and started the wacky and not responding and all other kinds of things with ghost touches and all. I looked at facebook from the web with google chrome after the app was off again and no problems. Also I found out that if you do not use the default text keyboard are the default text message program on the phone no matter if you like what it does are not it will cause you problems!! I will update and let you know as I go threw finding out what really happens with doing all this again!! Thanks and hope this helps a lot of people as it certainly had me stumped. I love this phone but couldn"t use it will get back as I find more problems if things start to acting stupid again. OO and I have the verizon VS980

What could be more irritating than your Android phone touch screen not working? The phone becomes literally useless, and you cannot perform the immediate necessary tasks. However, an Android phone screen not responding to touch is surprisingly a common issue.

Before taking your phone to the service center, you can try and fix the phone yourself. Wondering how? Don"t worry, in this post, we will illustrate how to fix Android phone touch screen not working.

There are mainly two reasons for your phone and tablet touch screen not working. Either the touch screen might have been damaged, or the device has technical issues.

If you drop your phone and get stuck against any object, the touch screen"s connectivity can get damaged. Sometimes, only a part of the touch screen can get damaged and unresponsive.

When a technical glitch such as the phone getting hanged, the touch screen becomes unresponsive. Inserting a new memory card and SIM card can make the touch screen malfunction. Sometimes, when malware gets downloaded or you make changes to phone settings, the touch screen not working Android can occur.

Android touch screen not working could be due to physical damage. You could have dropped the device on the floor or in water. You could have stuck the device against a hard object and smashed the screen.

First of all, you should knock the touch screen a few times in each corner. This can snap back the loose connection that is responsible for the touch screen not working. Thereafter, you need to check the touch screen for bugs and find dead zones.

Once you dial the star code successfully, your device will get into diagnostic mode. This is where you can test the torch screen by choosing from different screen testing options.

When you have a broken screen device, you have to replace the screen. However, before you take your device to the nearby service center, you have to take back up of your data.

In fact, you may want to remove your personal media files so that they do not land in the wrong hands. You can use a third-party app to access your phone screen through your computer. We recommend AirDroid Personal app to operate your phone from your computer.

You should have AirDroid Personal app installed on your Android device beforehand. When your device screen gets broken, you can establish a wireless connection comfortably. Here are the steps to remote control your broken screen from your computer.

Step 2. On your phone, open AirDroid Personal app. Go to "Me" located at the bottom. Tap on "Security & Remote Features" option. Turn on "Remote Control" option and other options you may need by following the on-screen instructions.

Step 6. Once your computer is connected to the broken screen device, you will see your device"s screen on your computer. You can operate your phone remotely and control the phone easily.

When your device"s screen gets damaged, you have to take it to the nearby service center. They will either repair the damaged screen or replace the screen entirely. When Android touch screen not working and can"t unlock, you can try to use AirDroid Personal to first to factory reset.

If you have run the device in diagnostic mode and you are sure that the device is not physically damaged, it is a case of technical issues. If it is a non-physical damage situation, you can fix it easily yourself by executing different methods one by one.

The first step to perform when your touch screen is not working is to restart your device. This is referred to as soft resetting. Since the touch screen is not responding, you cannot turn your device off from the option on the screen. Here are the steps to follow.

Step 1: Press and hold the "Power" button until the device turns off. If you for a few seconds only, you will see "Power Off" and "Restart" options on the screen.

If your touch screen works in safe mode, you can rest assured that it is a technical problem. Accordingly, you can take steps to solve Android touch screen problem easily. Here are the steps to turn on safe mode.

If certain parts of your phone touch screen are not working, you can test the affected part only. You need a third-party app called Display Tester to test the phone screen.

You can find out defective pixels and dead parts. You can get a confirmation of the parts that are not working and take action accordingly. Here are the steps to follow.

You should keep the app on your phone until you get back the full touch screen working. This is because you have to run the tests again after you perform the next diagnostic method.

When you turn on Developer Options, certain Android devices start malfunctioning. If your touch screen is not functioning properly after turning on Developer Options recently, you should turn off Developer Options. Here are the steps to follow.

When uninstalling the recently installed apps does not solve the problem, you have to perform a factory reset. This will restore your device to its initial state when you unboxed the device.

When Android phone swipe not working, you can use your facial movements and voice commands to operate your device. This is more of a temporary solution to do some immediately necessary tasks on your device.

For facial movement, you need to install EVA Facial Mouse app. The app brings a virtual cursor to your device, and the cursor moves as you make movements of your face. When the touch screen does not work, you can perform any action like a computer with facial movements.

Sometimes, the external components can cause the phone to hang and the touch screen to stop working. Therefore, you should remove the SIM cards and the memory card attached to your device. Then you should restart your phone and see if the problem gets solved.

We have stated how to fix Android tablet touch screen not working and the same is applicable to Android phone. You have to first decide if the touch screen issue is due to physical damage or technical issue. Accordingly, we have provided the solutions. For immediate access to your phone, you should use AirDroid Personal to remote control your phone or tablet.

Yes, a cracked screen can definitely affect touch. However, depending on the extent of the crack, the entire screen may not be affected. Only certain parts around the crack can get affected. In fact, a cracked screen can affect touch not immediately but after a delayed period.

You can use super glue or a packing tap. Some people use a sticker to disguise the crack. You should replace the cracked screen protector and you can use a fancy protector this time so that the crack is not easily visible. You can take it to the nearby repair shop and they will certainly come up with a creative solution.

You possibly can relate with how much you take good care of your touch screen when your mobile device is either used, charged, placed in a handful bag, or kept in a pocket. It"s always applied with great care. This is solely because your touch screen is an essential component of your mobile device, and you can not afford to cope with the middle part of touch screen not working.

Aside from its huge cost of repair, it disconnects you from accessing your device features. In some instances, it may be partially affected or stop working completely by not responding to any of your taps. I can feel how furious and frustrated you can be. Relax, you are not alone.

You might be thinking it can never happen with the extra care attached to it. But it might be otherwise. Can you remember the countless times you tap your touch screen when responding to social media messages? Or when you listen to pop music and another genre when you"re in the restroom?

The middle part of a touch screen is the most-used section of your device"s touch screen. Although, other touch screen parts are also necessary for navigating you through several other functions on your device, yet, you may not necessarily need to fix it immediately. However, you must have a clue on how to fix the middle part of your touch screen.

The crucial task and aspect you need to work on when your middle touch is not working are to inspect if there"s no pointed crack or area on the touch screen. The touch screen is a delicate part that can be affected by a mere simple metal piering or metal attachment. Unknowingly, the damaged middle part may look like a speck of mere dust to you or sometimes colored at a definite spot.

An insight I"ll give you is to check the sides and angles of the middle part for any cracks or breaks. A magnifying glass can help too if you can"t see well. Moreover, it"s also essential you use bright lights in a dim place to detect scratches. If there"s a slight botch on the screen, you may have to consult a repairer.

Another reason why you may experience a faulty middle touch screen is through a water accident. You sometimes spend most of your time with your smartphones at home. Perhaps, when you"re engaged in the kitchen, and when having your bath in the bathroom. Even, you can unknowingly dive into a pool with a phone in your pocket.

Smartphone developers have quite been creating varieties of devices with a water resistor. Yet, for your device that has no water resistor, you need to apply extra care and know-how to detect if your middle touch screen is affected by a water accident.

For your device with an inbuilt battery, check for a possible color change at the Sim slot. If there"s any, you can clean it with a cloth and leave it to dry at a minimum of two days. Ensure the device is not switched on during this course to avoid a connection breach at the battery point.

Do you know your corrupt SD Card can hinder certain parts like the middle touch screen or the entire touch screen of your device from working? Yes, it can. Even though your SD card is an alternative to your internal storage device that allows you to manually store files, images, videos on it. The middle part of your touch screen which might be the most touched part of your device can seize to work when your SD Cards freezes and can lag your operations when it"s corrupted.

It"s easy to unmount your SD card without having to touch the middle part of your touch screen when you want to power off the device. Activate the airplane mode at the top bar and remove the SD card successfully.

Your smartphone can neither be used nor operated without using external attachments like the screen protector, earpiece, and a USB charger from a third-party source. These attachments are not all recommended for your Smartphone. Your middle touch screen can stop working if you use an unsuitable external attachment with the device.

Malicious Android apps are now on a rampage. Some Android apps can serve as a problem for your device if not properly scrutinized before installed. Screen bugs and glitches on the middle part of your touch screen can arise from an unsafe installed app.

A safer means to avert and cross-check malicious apps is to enable the Google Play Protect option on the Google Play Store of your device. The Google Play Protect can scan multiple apps installed on your device in a day with a waiver on other apps not downloaded from the Play Store.

For most Android devices, the restart icon is located in the middle of the screen. However, you can perform this by using the power and volume button. This restarts every app that freezes a section of your touch screen.

The safe mode option is another way to clear your middle touch screen off the hooks of not working. This can also be done by the method you used in restarting your device. You can switch your device to safe mode with these simple steps.

Most times, the middle part of touch screen not working is caused by due to hardware damages, which can only be rectified by a trained technician. In that case, we recommend you visit the offial service provider for your brand for assistance.

Locate dirt, debris, residue, or blots/drops of anything that looks like it may fool the system into thinking a touch is being issued there. It is surprising how sensitive these overlays can be, and they have to be, for the most optimum performance.  So, to begin troubleshooting any touch issues, start by using a soft cloth and some 70% isopropyl alcohol to really wipe the screen down.   Inspect the inner LCD bezel for debris. Use a can of duster-air and/or folded piece of paper for the tight places.  Next, inspect the screen for scratches, pits or dents.  All of the above will produce results, such as, misaligned touch, or a cursor that is constantly retracting back to the same position.

(Touch Monitors Only) First, if using a touch monitor, start by resetting the USB cable on both, the computer, and touch monitor ends, and use a different USB port on the PC end.  If all USB ports are currently utilized, try swapping with another simple device, such as, a keyboard, mouse, memory stick etc. Avoid swapping with a printer, as this may produce printing problems.

If using a Touch PC or Touch Monitor, let’s start with Calibration.  Head to your Start Menu, select All Programsand locate the Touch Kit (XTS/XPC product line) or Touch Utility(EVO product line) folder, and locate your calibration option to begin.  Depending on your product line, you will find this under Tools or Devices.

If your touch is not responding at all, let’s insure the drivers are correctly installed.  Navigate to you Start Menu > right-click on Computer > Manage > Device Manager > and expand the, Mice and other pointing devices category.  Do you see aUTCRS232, URTC1000, or IdeaComentry? If so, do you see it listed with a yellow exclamation, or question mark? If no entry is found here, do you see it listed under the category Other Devices? If you see an entry and it is marked with a yellow icon, try the following:

If no entry is found, we need to insure the USB touch controller cable from the monitor, is directly plugged into the computer and not through a USB splitter / Hub.

Slowly drag your finger to the bottom right corner without lifting. Try to move your finger slowly enough that you can count to 10 before reaching the opposite corner of the screen.

For most folks, the touchscreen is the only way to interact with your iPhone, so if it doesn"t work, then your phone doesn"t work either. While an unresponsive touchscreen — one that either doesn"t respond at all to your taps or that responds intermittently and unpredictably — can be frustrating, there"s no need to be alarmed; there are some simple fixes you can try to get it up and running again before taking it into an Apple Store.

We"ll cover some of the ways to fix an unresponsive iPhone touchscreen, from a simple restart all the way to the nuclear option of factory resetting your iPhone. If none of these work, then you can at least be confident you"ve tried everything you can before you reach out to Apple for professional help.

Of course, if your touchscreen is acting up, you may not be able to move the power-off slider properly to shut down your iPhone. In this case, you"ll need to resort to a forced restart, which is basically like rebooting your iPhone without powering it down first.

In many cases, restarting your iPhone will fix an unresponsive touchscreen, so this should be the first thing you try before attempting anything else.

Screen protectors are usually very thin these days and are designed to work well with modern smartphones. However, in some rare cases, they can affect the responsiveness of your iPhone"s touchscreen. As such, if you"re using a screen protector, you should check whether it"s been properly applied to your iPhone"s touchscreen. If it hasn"t, try removing and reapplying it or using a new protector if you have one available.

Even if your screen protector has been properly applied, it"s still a good idea to try removing it just to make sure it"s not getting in the way. If your iPhone"s touchscreen begins working properly after taking your screen protector off, you may want to consider forgoing a screen protector entirely or buying a thinner one from a reputable brand.

using a screen protector that allows small particles to get trapped in between the protective glass or film and your iPhone"s screen. Try cleaning your screen — without a screen protector installed — by using a dry microfiber cloth until it looks as spotless as possible. If the touchscreen is working properly at that point, you can try reapplying your screen protector.

It"s pretty uncommon these days, but we have encountered cases where connected accessories somehow get in the way of your touchscreen interactions. So, if you"re using wired headphones or even just a charger, try disconnecting those and seeing if your touchscreen begins working properly. Be sure to restart your iPhone after disconnecting the accessory to be certain you"ve covered all the bases.

If your device"s touchscreen begins working after any such accessory is removed, then it"s likely you"ve found the culprit. Try replacing the accessory with an alternative to see if things improve. However, if you experience touchscreen problems when any accessory is connected to the Lightning port, regardless of type, then there"s likely a deeper problem that will require one of the software or hardware fixes in the following sections.

If your iPhone touchscreen still isn"t responding after trying the steps above, the next thing to do is update your iPhone to the latest version of iOS. If you can interact with your iPhone well enough to get into the Settings app, then tapping General > Software Update is the fastest and easiest way to do this. Otherwise, you"ll have to connect to a Mac or a Windows PC running iTunes.

Step 3: If you can unlock your iPhone to get to the home screen — which may be possible using Face ID or Touch ID even if your touchscreen isn"t responding — and you"ve connected your iPhone to this computer before, then it should appear in the sidebar in Finder or iTunes. From here, you can select your iPhone in the sidebar and select the Update button in Finder or iTunes to download and install the latest iOS update.

Step 4: If you haven"t used your iPhone with this computer, you"ll see a prompt on your iPhone to "Trust" this computer that you"ll need to tap on to confirm. If your touchscreen is responsive enough, then you may be able to tap on that to confirm, and then continue with the step above to update your iPhone.

However, if your touchscreen isn"t working at all, then you won"t be able to confirm the trust prompt, and your Mac or Windows PC will have no way of communicating with your iPhone normally. Instead, you"ll need to put your iPhone in "Recovery" mode first. Here"s how to do that:

If updating your iPhone doesn"t resolve any software-related issues that could be causing your iPhone"s touchscreen to freeze, then the final option you can try is restoring your iPhone back to factory settings.

This will erase everything on your iPhone, returning it to its original out-of-the-box state. It"s the best way to confirm that the problem you"re encountering is actually hardware and not software, but of course, you"ll lose everything on your iPhone unless you already have a backup, or you"re able to make a new one.

Unfortunately, if your touchscreen is completely unresponsive, you"ll only be able to do this if you"ve previously connected your iPhone to your computer. Otherwise, your iPhone will prompt you to "Trust" what it sees as an unknown computer, and you won"t be able to confirm that security prompt to grant access to the data on your iPhone.

Nevertheless, even if you can"t get a recent backup, you may still want to go ahead and perform a factory reset anyway. Depending on the apps you use and the kind of data on your iPhone, a backup may not be as critical since your important data may already be stored in other cloud services such as Dropbox, Google Drive, iCloud Photo Library, or Google Photos. However, we don"t recommend assuming this is the case — make a backup if at all possible, and be prepared to lose at least some of your data if you choose to proceed with a factory reset without a backup.

When your iPhone finishes the restore process, go through the initial setup without restoring your data from a backup. By setting your device up as a new iPhone you"ll be able to confirm that the touchscreen is working properly. Once you"re satisfied, you can restore your backup by factoring resetting it again and choosing to restore your backup during the setup process.

If you experience the touchscreen responding inaccurately, not sensitive, or not responding at all, please refer to the following troubleshooting in order. If your touchscreen doesn"t have right-click function, please refer to How to set the right-click function for touchscreen.

If the screen has never responded to touch, but you think it should, please refer to the following methods to confirm whether your computer has a touchscreen function.

If the Pen and touch section shows as [No pen or touch input is available for this display]③, this means your computer does not have a touchscreen function.

Note: The soft cloth should not be too wet and do not spray any cleaning solutions directly onto the screen or leave any liquid on the screen. You are able to use water to replace cleaning solutions if you don’t have any.

Installing a screen protector or some other accessories on or around the screen may sometimes interfere with the touch function of the screen. Therefore, please try removing those accessories from the screen and then test the screen again. If problems persist, please continue to the next step.

Note: This process may need to download and install through the internet. Make sure your computer is in an available network environment, then connect to internet.

After the touchscreen driver’s name displays in the Human Interface Devices category, please restart the computer then test the touchscreen function again. If problems persist, please continue to the next step.

The touch calibration has been reset to the default settings, please restart the computer and test the touchscreen function again. If problems persist, please continue to the next step.

If the touchscreen problem happens recently, and if you have ever created a restore point or there is an automatic system restore existed, try to restore the computer to a point before the problem began to resolve the problem. Here you can learn more about How to use restore point to restore the system. If problems persist, please continue to the next step.

If the screen has never responded to touch, but you think it should, please refer to the following methods to confirm whether your computer has a touchscreen function.

If the Pen and touch section shows as[No pen or touch input is available for this display]③, this means your computer does not have touchscreen function.

Note: The soft cloth should not be too wet and do not spray any cleaning solutions directly onto the screen or leave any liquid on the screen. You are able to use water to replace cleaning solutions if you don’t have any.

Installing a screen protector or some other accessories on or around the screen may sometimes interfere with the touch function of the screen. Therefore, please try removing those accessories from the screen and then test the screen again. If problems persist, please continue to the next step.

After the touchscreen drivers uninstall, please highlight [Human Interface Devices]⑨ in the Device Manager, then select [Action]⑩ and [Scan for hardware changes]⑪.

Note: This process may need to download and install through the internet. Make sure your computer is in an available network environment, then connect to internet.

After the touchscreen driver"s name displays in the Human Interface Devices category, please restart the computer then test the touchscreen function again. If problems persist, please continue to the next step.

The touch calibration has been reset to the default settings, please restart the computer and test the touchscreen function again. If problems persist, please continue to the next step.

If the touchscreen problem happens recently, and if you have ever created a restore point or there is an automatic system restore existed, try to restore the computer to a point before the problem began to resolve the problem. Here you can learn more about How to use restore point to restore the system. If the problem persists, please continue to the next chapter for troubleshooting.

2. The screen may be unresponsive while wearing the gloves, if your hands are dirty, or if you"re using sharp tools or your fingertips to touch the screen.

3. Installing a screen protector, bumper case or some other accessories on or around the screen may sometimes interfere with the touch function of the screen. Therefore, please try removing those accessories from the screen and then test the screen again.

4. To increase the touchscreen sensitivity, you can enable "Glove mode"in the settings (Settings > Advanced > Glove mode). Please disable＂Glove mode＂for regular use.

7. If touch screen issues occur after certain 3rd party applications are installed or after receiving an error message from the OS pop up, please reboot the phone and then test the issue in Safe mode (Long press the power button > Long press the power off > Click OK to Reboot to safe mode). If the issue does not occur while in the safe mode, it may be caused by the 3rd party application. Please remove any recently installed applications and test the touch function again.

8. If the touch function of your phone is completely unresponsive and you can’t turn it off, please press and hold the power button for 10 to 15 seconds to "forced shut-down"the phone. Then try rebooting the phone.

* This information may not be suitable for all products from the same category/series. Some of the screen display and operations may be different due to the software versions.

You may have encountered it when you click on the ELO touch screen display, but the elo touchscreen monitor has nothing to do with it. This is especially true for elo POS touchscreens that are critical to your business.

Hardware problems may be caused by the touchscreen, controller, cabling, power supply, or by the integration of the touchscreen components in the display.

While touch screens are handy, it definitely isn’t useful if they aren’t working. Here are a few troubleshooting steps you can take to fix the issue with your car’s touch screen:Clean your touchscreen

The cost of having a professional replace your car’s touch screen depends on what you choose as a replacement but can generally land between $100 and $300.

In Windows, search for and open View pen and touch info. If the Pen and touch section reads No pen or touch input is available for this display, the computer does not have a touch screen.

Right-click the HID-compliant touch screen device, and then click Enable, if possible. If the Enable option is not available, continue to the next step.