ips and lcd display difference brands

Display technologies are advancing every day. All the major tech giants like Apple, Samsung, One Plus use one among these technologies for building the displays of their Apple phones or Galaxy Notes. Each has its advantages and disadvantages. So which one is better? Is it the AMOLED favored mostly by Samsung? Or is it the IPS LCD favored by Apple for their iPhones? Let us take a detailed look at the features of AMOLED vs IPS display technologies.

AMOLED stands for Active-Matrix Organic Light-Emitting Diode is a type of display used mainly in mobile phones. You might have seen the AMOLED display mentioned in the specifications for smart devices, especially mobile phones. They are also used in smartwatches, laptops, and even televisions. Let’s see what the terms in AMOLED mean.

The Active Matrix technology came about as an improvement on the existing passive matrix technology that used passive components like wires which were arranged vertically and horizontally to control each pixel. The color and brightness of the pixels and thereby the picture can be altered by varying the electrical charge at the given joint of vertical and horizontal wires. The newer Active Matrix uses active electrical components like transistors and capacitors to carry out the same purpose. Instead of varying current at the intersection of wires to control the pixels, this latest technology uses a grid or matrix of thin-film transistors commonly referred to as TFTs and capacitors.

You might be familiar with the giant LED bulbs used at parties or even as indicators on televisions showing the on/off state. These same LED lights are used in AMOLEDs, but of course in the smallest size possible. The LEDs used are in the primary shades namely Red, Blue, and Green, and are grouped in triangle-shaped pixelated forms.

The Organic Light Emitting Diode is commonly referred to as OLED. It is pronounced as “oh-led”. OLED is a type of display in which each LED lights up one at a time. When you light them up together in different intensities, you will get more colors in the spectrum. So all LEDs switched on at the same time give you white color and similarly switching off all the LEDs together gives black color. An OLED display is comprised of a substrate, an anode, a conductive layer, an emissive layer, a cathode, and the cover. The substrate is either plastic or glass that supports the display panel.

Compared to the LCD and LED displays, the diodes in the OLED display produce light individually meaning they do not need a backlight like their predecessors. OLEDs use lesser electricity and are thinner compared to LEDs. They are also bendable and may even be curved. However, they are much more expensive than LED displays. Hence in the earlier days, it was majorly used for displays for

Now the technologies mentioned above combine to give the AMOLED displays. Here an OLED display is driven with an active matrix control scheme. The TFTs (thin-film transistors) turn on/off each pixel one at a time. The other scheme where the OLEDs are controlled by a passive matrix requires each grid ( rows and lines) to be controlled together. The advanced AMOLED displays allow for higher resolution display with a much bigger physical size.

AMOLEDs have deep black lights. The blacks are darker than LEDs and LCDs because parts of the screen can be switched off altogether. AMOLEDs are also thinner and lighter than LCDs. This feature especially stands out in a dark theater room where OLED displays give a higher contrast ratio compared to LCDs making for an excellent visual experience. This feature of OLED which can work with no backlight makes it better than LCDs whether or not they have an LED backlight.

Since they use Active Matrix technology over the passive matrix version, AMOLEDs have a faster response time. They are up to a millisecond faster and extract less power from your mobile phone’s battery. Extended battery life means major advantages in the portability department. This adding to its high display features leads to them being extensively used. They are preferred over the other versions by major companies like Samsung. Speaking of power, the amount consumed by an OLED display varies according to the brightness and color of the picture displayed.

AMOLEDs have impressive contrast ratios. The contrast ratio is the ratio of the luminance of white color to the black color of a display unit. The high contrast of AMOLEDs is because when the LEDs are off, it gives complete black and since no backlight is used in LEDs, we get deep blacks.

One of the disadvantages the AMOLED had over LCD was the blurriness caused in sunlight which is a result of its lowered peak-brightness values. This issue was corrected in the advanced Super AMOLEDs. In the Super AMOLEDs, the size of gaps between the various layers of the screen namely the cathode layer, anode layer, organic active layer, TFT layer is made narrower than before.

Another problem associated with the AMOLEDs is that the organic materials used in the emissive layer and the conductive layer suffer degradation. This happens comparatively in a short amount of time. As a result, various display problems arise including image persistence, burn-in, etc which are essentially screen burn type problems and color shifts where some colors fade quicker than others. Burn-in is essentially the pixel quality becoming trash after a while because of the degradation of the organic molecules.

Most flagship models of major companies like Samsung, Apple, and One Plus use either super AMOLED or IPS panel premium LCDs. So what exactly is an IPS display? and how does it feature against like the likes of super AMOLEDs?

First, let us understand the basics of a standard LCD. Simply put, when you apply current to some crystals, they may or may not let through the light which comes from a backlight that covers the whole display. In addition to this, there are polarization and color filters present in LCDs which finally give the primary colors Red, Blue, and Green.

Before we get into detailed explanations, you have to keep in mind that for the final end-product that ends up on the market, the quality of the display does not solely depend on whether it is IPS or AMOLED. The companies usually put their tweaks on top of the existing technology before making them available in the market. AMOLEDs are a newer technology than IPS LCD and improve on it in some areas while still lagging in others.

The IPS LCD stands for In-Plane Switching Liquid Crystal Displays. It emerged onto the scene as an improvement on the existing and vulnerable Thin Film Transistor LCD technology commonly referred to as the TFT. Samsung was the leading manufacturer to employ Super AMOLEDs. The IPS display is mainly being used in Apple iPhones. Apple beginning with the iPhone X is switching to AMOLED displays with contrast ratios of 1000000 to 1

As said before, an IPS display is an improved version of the regular TFT LCDs. Here, the difference comes in the way the anode and the cathode are arranged. They are planted as strip electrodes on one of the two glass substrates.

The IPS display scores big time when it comes to offering better viewing angles compared to the other LCD technologies like Twisted Nematic LCD (TN) and Vertical Alignment LCD (VA). The IPS display can be viewed without any color degradation or blurriness at flimsy shallow angles compared to TN and VA displays.

The consistency of colors and clarity of pictures at wider viewing angles is the major advantage of an LCD. IPS displays have higher resolution. They also can display a wide range of colors. These features also make the IPS displays costlier than TN and VA LCDs. Normally IPS monitors allow up to 178 degrees of viewing angles. These displays almost guarantee absolute color accuracy.

For other LCD models, the color and the brightness of an image vary when viewed from different angles. Compared with them, IPS displays are more suited for someone working as a visual/graphic artist. As a regular television, all LCD models are mostly considered equally good. This is because the viewers would mostly be sitting right in front of the screen where these differences between the models do not matter.

IPS displays are capable of displaying a wider spectrum of colors. Considering no monitors can display the entire color spectrum visible to the human eye, IPS LCD panels are the closest things to a perfect display monitor far better than TN and VA LCDs

Image retention is a problem often associated with LCDs. This happens because of the crystal which gets into a particular position for the light to go through stays in that same spot without falling back into its original position. This leads to some parts of the image being left on the screen. This is, however, a temporary problem. The crystal will eventually twist back into the position when the current is applied to it again. When it comes to color accuracy, the previous generation of LCDs was no match for the AMOLED. They had the highest color accuracy among mobile phones. But recent versions of the LCDs have fared much better versus their counterparts.

Large-sized IPS monitors are not affordable for the average customer. They should be avoided since they offer nothing impressive over other LCDs considering the price range. However, if you are a visual artist or a photographer, IPS displays provide the best color accuracy in the market. It would be more beneficial to you compared to an ordinary TN display unit.

AMOLEDs and IPS LCDs are two sides of the same coin in a sense. They both got their advantages and disadvantages. Their disadvantages are mostly overshadowed by the many tweaks installed by the parent companies to ensure customer satisfaction. From high power consumption to ugly blacks, the flaws are minimized in every newer version.

This website is using a security service to protect itself from online attacks. The action you just performed triggered the security solution. There are several actions that could trigger this block including submitting a certain word or phrase, a SQL command or malformed data.

Many TVs use LCD (Liquid Crystal Display) panels that are lit by LED backlights. There are two popular types of LCD panels: In-Plane Switching (IPS) and Vertical Alignment (VA), and there are two main differences between each type. A VA panel usually has a high contrast ratio and narrow viewing angles. However, an IPS panel has low contrast and wide viewing angles. These are the main differences between each, and for the most part, panel type doesn"t affect other aspects of picture quality, like peak brightness, color gamut, or color accuracy.

For the purposes of this article, we"re going to compare two LED-backlit LCD TVs: the Sony X800H, which has an IPS panel, and the Hisense H9G, which has a VA panel. Due to their different panel types, there are three noticeable differences in picture quality: viewing angles, contrast, and black uniformity, so we"re going to look at each one.

Viewing angle refers to the angle at which you can watch the TV without seeing a noticeable drop in picture quality. IPS TVs are the clear winner here, as the image remains accurate when viewing from the side - you can see the differences in the videos above. This is their main advantage over VA panels. Most VA panel TVs have a noticeable loss in image accuracy when viewing from the side. The narrow viewing angle of VA-type TVs is also problematic when the TV is used as a PC monitor from up close since the edges of the display look washed out.

Contrast ratio is one of the most important factors when it comes to picture quality. It determines how well a TV displays blacks, so one with a good contrast displays deep blacks when viewed in the dark. However, if your TV has a low contrast ratio, you"ll notice that blacks look gray when viewed in the dark.

VA panels are far superior to IPS panels when it comes to this, so if you tend to watch movies in the dark, you likely want to get a TV with a VA panel. Most TVs use VA panels due to this main advantage, and high-end models may have a local dimming feature that further enhances black levels. On the other hand, IPS panels normally have low contrast, so blacks look closer to gray, but you may not notice the difference in contrast in bright environments.

In the photo above, the Hisense has a much better contrast ratio; both photos are set at the same brightness, but the Hisense appears brighter because there"s a bigger contrast between its deepest black and brightest white.

Our black uniformity tests determine how well a TV displays a dark scene with a bright image in the center. Ideally, you want to see a completely black screen with the center cross being the only part that"s lit up, and this is important for people watching movies. No LED TV has perfect uniformity, and unlike viewing angles and contrast, the panel type doesn"t completely determine its black uniformity. However, most VA panels that we"ve tested have good black uniformity, while most IPS panels have sub-par black uniformity. This doesn"t mean that every VA panel TV has good uniformity, as this can change between units, and you can also improve uniformity using the local dimming feature.

As you can see in the pictures above, the Sony has uniformity issues with backlight bleed and clouding throughout. The entire screen also looks blue due to the low contrast ratio. The Hisense"s screen is much more uniform, and although you can see some backlight bleed along the edges, it disappears if you enable local dimming, as seen in this photo.

LCDs function by having liquid crystals in little groups to form the pixels. These crystals react and change position when charged with electricity and, depending on their position, they allow a certain color of light to pass through.

IPS displays have their crystals aligned horizontally at all times. When charged, they turn to allow light through. VA displays have their crystals aligned vertically. When charged, they move to a horizontal position, allowing light through. When current isn"t sent through them, however, their vertical alignment blocks light far more efficiently, creating better blacks and giving better contrast.

There"s also another type of IPS panel, called Plane-to-Line Switching (PLS), which can be seen with the Sony X800H. This panel type was designed by Samsung and technically performs the same as an IPS panel. When you compare the pixels visually, IPS panels look like chevrons, VA looks like very straight rectangles, and PLS looks like round-edged capsules. You can learn more about pixels here.

The way the pixels are laid out can also affect text clarity. Many IPS panels, like the ones on the Sony X800H or the LG SK9000, use RGB sub-pixel layouts, while many VA panels have a BGR layout, like on the Hisense H9G. The sub-pixel layout doesn"t directly affect picture quality unless you"re using it as a PC monitor. Some applications may expect an RGB layout, so if you have a BGR sub-pixel layout, text may not look clear. You may need to increase the text scaling to read it properly, but this issue isn"t common with an RGB layout. You can learn more about it here.

Unlike LED TVs, OLEDs don"t use a backlight and instead have self-emitting pixels. This allows the pixels to individually turn on and off, resulting in perfect blacks. This means that they also have perfect black uniformity as there"s no blooming around bright objects like on some LED TVs. They also have wide viewing angles, sometimes even wider than some IPS panels, so OLEDs are a good choice for wide seating arrangements.

Samsung released quantum dot TVs in 2015, which they later labeled as QLED in 2017. These TVs include a quantum dot layer between the LED backlights and the LCD panel to achieve a wider color gamut. Other companies like Vizio and TCL also use this quantum dot technology on their TVs. Adding this extra quantum dot layer doesn"t change the characteristics of the panel type; the VA panel on the TCL 6 Series/S635 2020 QLED still has a high contrast ratio and narrow viewing angles. Although most QLED TVs use VA panels, you can easily use an IPS panel as well.

Manufacturers have tried different techniques to improve the viewing angles on VA panels over the years, aiming to produce a perfect LCD panel with both wide viewing angles and high contrast. While they have yet to achieve that goal, a few TVs have hit the market that try to combine the best of both panel types. The first TVs with this viewing angle technology came out in 2018, and only a few high-end models like the Samsung Q90/Q90T QLED and the Sony X950H had this technology in 2020. These TVs are a bit unique, delivering noticeably better viewing angles than their pure VA counterparts, but still worse than true IPS panels. This comes at the expense of a lower contrast ratio, as these TVs have worse native contrast than most VA panels, but they"re still better than IPS panels. Combined with their local dimming features, they still produce deep blacks.

Below you can see the viewing angle videos for the Samsung Q90T and the Sony X950H. The image remains accurate at fairly wide angles on each TV, but the Samsung does a better job overall at making sure the image is still fairly accurate when viewing from the side.

Between IPS and VA panels, neither technology is inherently superior to the other as they both serve different purposes. In general, IPS TVs have wide viewing angles suitable for when you want to watch the big game or your favorite show in a large seating arrangement. They"re also beneficial for use as a PC monitor since the edges remain accurate if you sit up close. However, VA panels are a better choice for watching content in dark rooms, as their improved contrast allows them to display deep blacks. Choosing between the two is a series of trade-offs and qualities, so choosing the best TV for your needs depends on your usage.

Choosing a new monitor is tricky, especially now when there are lots of different options available with each offering a pretty great set of features. There are a lot of things that you need to consider while buying a digital display of any kind such as display size, resolution, aspect ratio, color accuracy, and many others. But, there is a major underlying fact which affects the overall image quality and viewing experience on a display which is the display panel. There are multiple types of panels available in the market and each offers specific pros and cons.

Today, we are going to talk in detail about LED and IPS display panels. While looking for a new TV or monitor for your computer, you must have come across these 2 options more so than others. In this guide, we will talk about these panels in detail and discuss how the panel type affects the image quality and color accuracy on a display. We will also compare both of these options with regards to various important factors such as image quality, response time, power consumption, and much more. So, make sure you don’t miss that.

LED stands for Light Emitting Diodes. It is a very simple yet elegant display technology that dates back all the way back to 1962. This is basically a backlight technology where small diodes make up the entirety of the display and light up in a specific manner to create the image. A lot of users often get confused between LED and LCD display technology due to their similarities.

LCD is a slightly older technology compared to LED. Thus, LED is basically an upgrade to LCD display technology. Both of these display panels come with liquid crystals that generate the image on the display panel. But, the LED display panel features a backlight along with the liquid crystal layer.

There are a lot of applications for which LED TVs and monitors turn out to be the best options. Also, a lot of brands use LED technology along with IPS to offer the best of both worlds. Now that you understand what an LED panel is and how it works, let us take a look at some pros and cons of LED display panels.

IPS is one of the recent technological advancements in display technologies. Even though the technology came out in the mid-1990s, it is just starting to become the standard option for TVs and monitors. There have been a lot of improvements in the IPS display technology since its initial release and most of its limitations have been overcome thanks to the new options and compatibility with other technologies.

IPS stands for In-Plane Switching. This is also a type of LCD display technology much like the LED display technology. However, a lot of users prefer IPS display panels due to their wide viewing angles and sharp color accuracy. IPS panels are also a preferred option compared to VA and TN panels when it comes to desktop monitors.

In an IPS display, the liquid crystal panels are aligned in parallel to introduce lush colors. There are also polarizing filters that have their transmission axes aligned in the same direction for even better image quality. Unlike LED panels where the crystals are at right angles, IPS panels feature liquid crystals lined up in parallel to offer extended viewing angles as well as color accuracy.

In the majority of cases, users are confused between LED or IPS panels when it comes to buying a new monitor. Unlike TVs where you can simply go with a highly reliable brand in order to get the best experience, you will have to carefully check each and every aspect of the desktop monitor you are going to buy. While a lot of these aspects include refresh rate, color modes, black stabilizer, response time, etc, one major factor is the panel type.

A lot of these major factors in a desktop monitor change based on the panel installed on the monitor. And with that, the compatibility of the monitor also changes due to differences in specifications. If you are buying a premium desktop monitor, you should carefully consider the following comparison and check which type of monitor is best for you. Going forward, we will discuss IPS desktop monitors and LED desktop monitors and compare them based on various important factors.

As you might have guessed, IPS monitors are desktop monitors that are powered by an IPS display panel. And with that, you will get the same advantages as well as limitations as mentioned above in our take on the IPS display panels. However, IPS monitors are right now one of the most preferred options for desktop users.

Despite offering the best color production and viewing angles, IPS monitors were lacking behind for heavy usage due to low refresh rate and response time for quite some time. But not anymore as a lot of brands have overcome these problems by combining IPS technology along with other options. Thus, the premium range of IPS monitors nowadays will offer a high refresh rate along with a low response time. And on top of that, Most IPS monitors also offer higher resolutions along with HDR compatibility which makes them perfect for entertainment.

LED desktop monitors are also not a bad option, especially if you are looking for longevity and reliable performance for all applications. Basic LED monitors will be highly affordable compared to high-quality IPS monitors. One of the best advantages of LED monitors is their efficient power consumption which also ensures their reliability for the long term. The overall temperature levels on LED desktop monitors are also significantly lower than that of an IPS monitor.

Furthermore, LED monitors offer a much faster refresh rate when paired with VA panel technology along with a faster response time. This makes them ideal for hardcore gaming. The few back draws of getting an LED desktop monitor are the comparatively shorter viewing angles, inconsistent contrast ratio, and fatigue effects on the display panel after long-term usage. Similar to IPS panels, you can also find a lot of great choices in LED monitors where the display panel technology will be paired with LED, LCD, or TN panels to overcome some of these drawbacks.

By now, you must have understood the major differences between an IPS and an LED desktop monitor. If you are still not sure, here is our comparison between both of these options. Here, you can quickly understand both of these options and select the one which offers you the most benefits based on your application.

When it comes to image quality, IPS display panels offer the best results in almost all aspects. Whether it be clarity, image sharpness, or viewing angles, IPS panels offer the best performance in all regards.

But as IPS panels have pretty high brightness levels, the contrast ratio on these panels might not always be great. On the other hand, LED panels offer pretty great black levels and high contrast ratio. If you decide to go with a VA panel, you can have both decent image quality as well as dark black levels which makes the image much more realistic.

The response time for IPS display panels has always been lower compared to LED display panels due to differences in technology. But, recently released IPS display panels have overcome the drawback and offer up to 144 Hz refresh rate on a mid-range monitor. And if you were to choose a premium option, you can get even higher refresh rate monitors powered by IPS display panels.

But compared to VA or TN panels, IPS still falls behind when it comes to refresh rate and response time. To be specific, TN panels are generally the best option for high-paced FPS games as it offers the fastest response rate at the expense of image quality. Typically, an LED panel such as VA or TN will offer you 1 ms of response time.

Again, IPS display panels seem to be the best option in this scenario. Due to the unique construction and working principle, you will get a very high level of brightness on the IPS panels. On top of that, the color accuracy and hue levels are not affected by the viewing angles on an IPS panel. This makes them a great choice for both primary as well as secondary monitors. Wide viewing angles will also benefit the viewing experience on TVs with an IPS panel.

When it comes to LED monitors, you will instead find better performance in terms of local brightness. With the array of LED lights powering the display, it manages to dim the darker area perfectly, offering a higher contrast ratio. Thus, the dark areas on an LED monitor look darker compared to the same image on an IPS panel. However, LED monitors still suffer changes in color accuracy and temperature due to variations in viewing angles.

Power consumption is yet another important factor for a desktop monitor. Your system might already be a power-hungry build, especially with a powerful CPU and graphics card. Thus, you wouldn’t want to add a monitor as well to the list.

As far as power consumption is concerned, LED monitors are far more efficient than IPS monitors. IPS display panels offer higher brightness levels, but at the expense of higher power draw. Also, IPS panels are comparatively less energy efficient considering the overall performance and power draw.

LED panels on the other hand offer pretty good brightness levels with efficient energy consumption. Due to features like local dimming, the overall power consumption of an LED monitor is much lesser than that of an IPS monitor. Thus, LED panels are also cheaper in terms of running costs.

As you can imagine, IPS panels generate more heat when they are active due to increased power consumption. It is not an ideal condition for the monitor or a TV, especially if you live in a considerably warmer region. Higher temperature levels might result in internal problems within the panel.

On the other side of the spectrum, there are LED monitors that offer almost similar brightness levels, but without excessive heat generation. You can easily install an LED display panel on your desk without worrying about increased temperature levels on your monitor.

IPS panels are considerably more expensive than LED panels. As a result, IPS monitors are also more expensive than LEDs. And as IPS panels are usually combined with other display technologies to counter its disadvantages, the price range of IPS monitors further increases.

Still, due to the increased competition in the market and the rise of numerous brands, you can easily find a great monitor within an affordable price range. But still, you will find better alternatives with VA or TN display technology compared to an IPS panel. You can opt for a higher resolution or faster refresh rate instead of going with an IPS panel in the same price range.

As far as gaming is considered, the most important aspects are resolution, refresh rate, screen size, and response time. Color accuracy and viewing angles are not really a major concern unless you are considering couch gaming. Also, the viewing angles are not much of a concern for desktop applications as you will usually install the primary monitor exactly in front of your sitting position.

Due to the reasons mentioned above, VA or TN panels are usually a better option for gaming. These monitors will offer you a higher refresh rate as well as screen resolution within the same price range which is always a better deal. However, you can always invest in a secondary IPS monitor for single-player games which benefit from better display quality and brightness levels.

IPS and LED display panels are always a matter of confusion when you are looking for a new display. There are a lot of options present in the market designed by various brands which offer a great range of options for both IPS as well as LED displays. In our guide, we have discussed both of these display technologies in depth and compared them based on some major factors.

Once you go through our guide, you will definitely find out which monitor is the perfect choice for you. If you are looking for a TV or a desktop monitor for watching movies or for productivity, then you should prefer getting an IPS panel. You will definitely benefit from the better visual quality and viewing angles in this scenario. However, VA or TN panels are generally a better option for gaming.

Liquid crystal display (LCD) technology is one of the most widely used screen technologies. It’s instantly recognizable because of its iconic flat-panel display.

In fact, within LCD, there are several technologies each with its own strengths and weaknesses when it comes to rendering images and video effectively.

If you’re wondering what makes IPS different and if it is the right display choice for your viewing desires, this article will compare IPS and LCD technologies with an explanation of how both work and the features they bring to your experience.

IPS was developed to overcome critical limitations of legacy LCD technologies, like twisted nematic field effect (TN) matrix and vertical alignment (VA).

IPS can achieve a much wider viewing angle than the older LCD technologies. It can achieve a viewing angle of up to 178 degrees in horizontal and vertical directions, making it an ideal LCD for wide-screen television viewing.

IPS screens can achieve rates that range from 60 Hz to as much as 390 Hz. This keeps IPS as a contender technology for gaming screens even though its response rate is not as fast as more modern screen technologies like OLED.

The linear response, higher bit depth, improved contrast, and image consistency give IPS screens exemplary color accuracy. They also have little to no color shift, which often affects VA displays.

An IPS screen can be confidently used for graphic and video design work if the resolution is suitable. It renders 256 colors faithfully, but its backlit screen creates a low native contrast ratio.

IPS retains its commercial appeal because of the sheer range of screens that are available, ranging from 23.8 inches right through to 85-inch options.

The versatility of IPS screen technology enables it to be used for a range of applications and devices, including televisions, smartphones, smartwatches, and tablets.

Like other LCDs, overheating of the screen can cause blackening defects. Manufacturers have developed liquid crystal formulations with a higher critical temperature to prevent this.

Gravity defects can affect any type of LCD screen. This is where the cohesive power of the liquid crystal in the screen is low, causing it to flow down to the bottom of the screen with a yellowing defect.

With this type of LCD screen, the liquid crystals are in a plane that lies parallel to its glass substrate. Voltage is applied through opposing electrodes on the glass substrate to activate the crystals in a unified plane. Each pixel in an IPS screen requires two transistors to achieve this switching.

Katsumi Kondo of Hitachi was a significant developer of IPS technology and, by 1992, Hitachi developers had established the principles of in-plane switching, later releasing the first IPS screen.

IPS technology has continued to be used for screens that include laptops, tablets, and even smartwatches. Its viewing angles, refresh rates, and color accuracy makes it a suitable screen for gaming and design applications.

Liquid crystal display is a display technology that uses the light-modulating properties of liquid crystals to render images in conjunction with a polarizer and backlight.

LCD was the first flat-panel display technology and has diversified over the last century to create screens suitable for a wide range of applications.

Twisted nematic (TN) LCD consists of liquid crystals that rotate (twist) to allow the passage of light when voltage is applied. Adjustments to the level of voltage lead to changes in light polarization and can be used to display an image.

Without the application of voltage, the crystals remain in this position and the screen is dark. When voltage is applied, the crystals shift to a tilted position allowing light to pass through and an image to become visible. VA can achieve greater contrast than IPS, but it is still hampered by an extremely narrow viewing angle.

The concept of liquid crystal is more than 120 years old, with the nature and properties of these crystals first described by the Austrian chemist, Friedrich Reinitzer, in 1888.

By the 1960s, the electro-optic properties of liquid crystals were known and, later in the decade, the concept of TN LCD was advanced with the development of screens for watches and other displays during the 1970s.

IPS monitors are the most advanced LCD technologies. They are still commercially viable with leading manufacturers like LG and Samsung selling IPS televisions with exemplary image quality.

Because IPS screens are a relatively older technology, it is possible to get a high-quality screen for prices that are much lower than the newer LED technologies. Older, TN LCD screens simply do not have the responsiveness, image quality, or color accuracy to render modern content effectively. They have become legacy technologies that are not being produced anymore.

With their vibrant colors and relatively constant picture appearance from multiple angles, IPS displays are suitable if your focus is on accuracy. When you can"t afford the pricey nature of these monitors, LEDs present a budget solution.

Not only do you spend less when shopping for LED displays, but you also spend less in terms of power uptake. Thanks to their less demanding operation, you also don"t have to worry about overheating issues.

The benefits of using LED TVs are minimal energy consumption, a long-lasting backlight with pictures being bright. IPS displays offer more image accuracy and have better color reproduction in small viewing angles. In short, LEDs are cheaper, though the advantage of an IPS screen is better picture quality. Having said that, Samsung"s Quantum Dot technology could boast of dramatically enhanced color compared to IPS panels.

Before we look at the detailed comparisons of these panel technologies, which of the two is better for gamers? And this earlier post will take care of your business side of things!

Although LED panels are excellent in competitive gaming, IPS gaming monitors have various tricks, like better image colors than other technologies, including TN and VA panels. If you want to play while getting the most accurate color depiction, choose IPS and make sure to go over our review of top-shelf 32"" gaming monitors, this affordable option from Dell, or these ones best suited for your Xbox One X.

What"s more, In-Plane Switching monitors maintain color consistency even when looking at them from extreme angles. If you prefer playing multiplayer games with your friends, the maintained picture precision across an extensive sitting arrangement is essential. Apart from picture, sound is essential to gaming, so check out these top monitors with speakers. And if you don"t want to break the bank, cheap G Sync monitors from this post are decent alternatives.

LED and IPS monitors (see also QLED) have excellent attributes with disadvantages as well. Before looking at the differences of screens featuring the two technologies, here is a look at the LCD (Liquid Crystal Display) technologies and also a LED vs LCD comparison.

LED (Light Emitting Diode) is a type of backlight technology in which the pixels light up. Many people confuse the difference between LED and LCD displays.

An LED monitor is a type of LCD monitor, and while both utilize liquid crystals for picture formation, the difference lies in LEDs featuring a backlight.

Notably, some IPS displays incorporate LED technology. Some reasons why some brands produce IPS displays infused with LEDs are the resultant sleekness and compactness.

The benefit of using LED panel technology is how bright the displays are while still maintaining an efficient energy consumption lower than other screen technologies.

On the other hand, an LED monitor shows less reliability and accuracy in color contrast. You also get a limited viewing angle meaning that you"ll only get the best quality when sitting directly in front of the display.

Monitor response times refer to the durations screens take to adjust from one color to the next. Response time differences are more conspicuous when playing fast-paced titles like CS: GO, Fortnite, and Battleground.

If you need LCD monitors with a quick response time, consider an LED display panel using either VA or TN technology. Such an LCD screen typically offers a 1ms response time. However, remember that these monitors tend to have smaller viewing angles and inferior image quality than an IPS monitor. Regardless, you can still get a considerably good performance when planning quick-action games provided you sit directly in front of the screen. In that case, vertical monitors from this article may prove a viable option.

On the other hand, LED monitors to focus on the brightness of the visuals. For this reason, you"ll notice a difference in the screen"s coloration based on your sitting position. Viewing LED monitors at particular angles may result in the appearance of washed-out displays.

Below are some combinations of these two technologies:LCD monitors incorporating IPS panels and LED backlightLED-backlit with IPS panel or TN panel featuresIPS display featuring LCD or LED backlight technology

Another big difference between IPS displays and LED monitors lies in the energy uptake. An IPS monitor provides better visual quality than an LED monitor, leading to more power consumption to maintain excellent on-screen performance.

Although LED monitors provide brighter screens, their power consumption is much less than IPS panel technology. That explains why they are a favorite Liquid Crystals Display technology amongst those looking for affordable electronics.

Because IPS monitors take up much power, they release more heat than their LED alternatives. Despite LED display monitors providing bright pictures, they produce relatively less heat than monitors with IPS display technology.

The cost of a monitor using IPS screen technology is approximately $100 or more, depending on whether the panel infuses other technologies like a TN panel or another type of LCD.

Notably, mid-range IPS monitors usually go for more than high-end LED monitors. When it comes to LED monitor prices, you can get excellent selections going for under $200 (see here), $100 and even $50, depending on your model and the included attributes.

While both offer superb monitor selections, the differences between IPS and LEDs make one a better option for you than the other. Apart from these two, there are other display types to choose from so it can be hard to decide which suits you best. Nonetheless, here are vital questions to answer before deciding.

When picking a monitor, it is essential to get one that aligns with your application. If you want a monitor for creative visual applications, go for an IPS monitor. This LCD panel allows you to sit at more diverse angles, get elaborate graphics, and features color accuracy.

If you want gaming monitors for fast-paced shooting games, LED monitors might be the ideal option to consider. Ideally, the type of LED monitor you pick should feature a TN panel to cater to the limited viewing angle and lower display quality. Other excellent options to consider are Organic Light-Emitting Diodes (OLED monitors), given their improved display quality over pure LED monitors.

As noted, IPS monitors provide impeccable visual quality. Unfortunately, you"ll have to put up with the increased energy consumption. Sometimes, an IPS monitor may get quite hot, leading to a concern in the unit"s longevity. That explains why various individuals consider IPS displays unreliable and not as good in terms of performance as LED monitors.

While you won"t have the impressive visual and color accuracy of a high-quality IPS display, LED monitors to suffer less from overheating issues. Many consider LED monitor performance as dependable and consistent.

When purchasing monitors, it"s wise to work with a realistic price range depending on the attributes expected. The more specs and panel combinations, the steeper the cost, irrespective of whether they are LED or IPS monitors. For example, monitors that include other Liquid Crystal Display panel types like VA and TN are typically pricier than pure IPS panels.

If you want value for your bucks" worth, consider getting LED monitors. Besides the availability of numerous LED monitors at budget prices like this S2318HN monitor by Dell, you are likely to have more attribute compatibility with them than with IPS technology.

Yes, they are less likely to cause eye strain than LEDs. With them, you get decent color representation and excellent contrast ratios. For these reasons, they minimize the effort your eyes take to decipher things. Some of these panels operate even at a refresh rate of 280Hz to reduce input lag and combat unpleasant screen effects like tearing that may lead to straining - click here for the best monitors for eye strain.

Both IPS and LEDs have critical upsides that might be key to your application. Irrespective of the technology you prefer, the trick is identifying which coincides best with what you envision for your monitor.

In sum, IPS monitors are fantastic if you have a more flexible budget and you prefer intensive viewing angles with impressive color reproduction and image accuracy. Something to remember is the increased overheating potential because of the relatively higher power consumption.

An LED monitor might be your go-to alternative if you want to spend less. Besides, you can pick from multiple options featuring LCD and TN panels to circumvent some shortcomings synonymous with LED displays. What"s more, their performance is more reliable.

When it comes to choosing the right panel type of your LCD monitor, the options are seemingly endless. We’ve discussed the differences between AMOLED and LCD displays as well as the different types of touchscreen monitors that are commonly used for various devices and their benefits. Now it’s time to learn about the different features and specifications of PLS and IPS panels so you can decide which one is the most suitable choice for your specific personal or professional applications.

PLS stands for plane to line switching. Also referred to as Super PLS Panel, this technology boasts superior technological advancements such as a multitude of brightness setting options, crystal-clear image quality, and adjustable viewing angles without breaking the bank.

IPS stands for in-plane switching. It’s one of the most commonly used monitors for LCD displays and it consists of two glass panels that hold a layer of liquid crystals in between them. The liquid crystals become animated and perform predetermined actions such as moving in a specific direction or displaying certain colours when they’re charged with an electric current. These actions result in the high-quality images that appear on your television, laptop, or smartphone screen.

Both LCD monitor panel types have their advantages and disadvantages for various types of applications. Finding out how they work will help you determine which one is the best choice for your needs.

As mentioned, IPS LCD monitors contain hundreds of liquid crystals that are situated between two glass sheets in a parallel formation. As electric currents run through the liquid crystals when the screen is turned on, they become animated and move in different directions and backlighting passes through them. This is what produces the crystal-clear and instantaneous images you see on the screen. The excellent viewing angles are the result of the horizontal movements of the liquid crystals inside the panel.

PLS panels for LCD monitors have been on the market for over a decade and have proven to be a worthy adversary for their IPS predecessors. Although the technology is the same for the most part, IPS does offer some minor improvements. The main difference is that IPS panels offer more optimized liquid molecular alignment, which makes for a slightly better viewing experience. Hence, PLS screens offer 15% more brightness than IPS panel types.

From an aesthetic and logistical standpoint, PLS panel types are also thinner than IPS due to the fact that the glass sheets that hold the liquid crystals in place are positioned much lower in the screen configuration.

When it comes to comparing and contrasting the differences between IPS and PLS LCD monitor panel types, the competition is pretty stiff. Both monitors are fairly similar with the exception that PLS is meant to be an improvement on the previous technology. Here are the key factors that should be considered when deciding which one is the best monitor panel for LCD industrial displays.

PLS monitors offer superior viewing angles when compared to IPS displays. Unlike IPS displays, PLS monitors don’t have any noticeable colour distortions and they have significantly lower production costs.

Colour contrast and brightness is a central concern when purchasing a new commercial or industrial display. Whether you’re a gamer or graphic designer, your best option in this regard is to stick to IPS displays. They offer far more consistent image quality, colour contrast, and brightness that’s perfect for applications that rely heavily on high-quality image production.

Unfortunately, PLS and IPS monitors both have a fairly slow response time (the amount of time it takes for liquid crystals to shift from one colour or shade to another). For this reason, neither one is the ideal choice for gaming purposes, but they’re both suitable for graphic design projects that focus more on colour distribution and accuracy than response time.

PLS panel types have been proven to have superior colour distribution and accuracy compared to IPS panel types. PLS displays have a far more expansive colour gamut that’s ideal for users who require the most natural-looking images and colour options.

Backlight bleed occurs when the lights from the back of the screen leak through the edges, which results in uneven lighting or glow. This is a fairly common shortcoming of IPS screens when the brightness is adjusted to a particularly high level and can make for a poor viewing experience. PLS panel types don’t have this problem and offer even lighting regardless of the brightness settings.

The answer is inconclusive. Both IPS and PLS monitor types certainly have their advantages. Although PLS is slightly better in terms of backlighting and faster response times, the margins for improvement are fairly tight. It really just depends on what your preferences are as well as the applications that the monitors are being used for.

Nauticomp Inc.is one of the leading manufacturers and distributors of sophisticated state-of-the-art LCD displays and monitors in North America. Contact us to learn about our various products or to place an order.

OLED vs. IPS LCD is a topic that comes up whenever consumers upgrade to a newer TV or a smartphone. Should you buy a TV that uses an IPS LCD display or should you pick up a TV with an OLED screen? Well, the answer isn’t so straightforward because they both have their advantages and disadvantages. In this article, we will explain how these screen technologies work and which one you should opt for while buying a TV.

IPS LCD (In-Plane Switching Liquid Crystal Display) and OLED (Organic Light-Emitting Diode) are the two most commonly used screen technologies. Older technologies, such as TN (Twisted Nematic) and PLS (Plane-to-Line Switching) displays, have almost disappeared (except in the world of PC monitors and budget laptops) because IPS LCD and OLED are clearly better in almost all aspects. Other technologies such as Mini-LED, MicroLED, and QNED technologies are extremely new and they won’t become mainstream for a few years.

So, when you are finally deciding which TV to buy, the real battle is between OLED and IPS LCD. So where do these stand? Which is better for you? Which one should you pick for your new home theatre? Read on for more information on the OLED vs IPS LCD battle.

IPS LCD displays are perhaps the most common display type days, especially in TVs and laptops. Laptops, entry-level and mid-range smartphones, and most TVs use LCD displays. So, how do IPS displays work? IPS displays use an array of LCD pixels that shift colour as required. However, they don’t emit light on their own. That’s the reason they need a backlight made up of LEDs (Light-Emitting Diodes). The backlight can be arranged in various layouts: towards the edges, spread across the whole display, or separated into different sections.

IPS screens display the black colour by changing the alignment of LCDs so that pixels block the transmission of light, but some light still gets through. That’s the reason IPS LCD displays can’t display true deep black colour. Instead, they display dark grey and there is some ‘backlight bleed’.

To reduce the backlight bleed, a feature called Local Dimming is used. The feature requires the backlight to be compartmentalized into different matrices, and only those sections are turned on which need to display non-black colours. Other sections of the backlight are turned off, offering true blacks. However, active zones still display some backlight bleed.

OLED displays have traditionally been restricted to high-end devices. Even today, only high-end TVs and laptops feature OLED displays. In the world of smartphones, though, OLED technology has been democratised and even mid-range smartphones these days use OLED displays with high brightness and high refresh rates.

In a nutshell, OLED displays don’t use separate backlight sources. Instead, every pixel can reproduce its own light (also known as self-emissive displays). So, there’s no need for an additional backlight and each pixel can be turned on or off as needed. Since there is no need for a separate backlight plane, OLED displays are much thinner than LCD displays. They also offer a much better contrast ratio and viewing angles. However, the organic material used in OLED pixels tends to “burn” over the years that results in ghosting. Moreover, they can’t be as bright as LCD, Mini-LED, or Micro-LED displays.

We have given you a brief overview of IPS and OLED technologies. But which one is better? And which of these will be right for you? Here’s a list of pros and cons to help you in your purchase decision, where it is for smartphones or TVs.

OLEDs have a quicker response time: OLEDs individually-lit pixels can switch on/off or change colour faster. This makes for lower ghosting during fast-and-frenetic action scenes or while playing games. Ghosting refers to when the image on the screen seems to be following itself around or is blurry at the edges.

OLED TVs are slimmer and flexible: As we mentioned earlier, OLED displays don’t need a bulky backlight plane, so OLED TVs are really slim. The next wave of display technologies – foldable and rollable displays – will also be powered by OLED.

IPS LCD TVs offer higher brightness: IPS LCD TVs use a powerful backlight which also lets them get much brighter than their OLED counterparts. This can make for better HDR and even offer a better viewing experience if your TV room gets a lot of sunlight.

IPS TVs suffer from backlight bleed and blooming: This is less of an issue with high-end IPS TVs, but some cheaper models may suffer from glow (bright, greyish areas near the corners of the screen) or backlight bleed (patches or leaks of light, usually around the edges).

OLED TVs can suffer burn-in: OLED displays are at risk of burn-in, a condition in which a static image left on for too long can get permanently ‘burned’ onto the display and may appear like a ghostly dark patch.

OLEDs may get dimmer with age: OLEDs use organic substances which tend to decay over time. So, OLED displays lose brightness with age. It is quite slow and modern OLED TVs are not as affected by this as older OLED TVs, and this really shouldn’t be an issue, but you need to be aware of this.

IPS TVs are much cheaper: OLED is a relatively newer technology and is more expensive to manufacture. Currently, very few companies make OLED display panels. LG Display makes most of the OLED panels found on OLED TVs, while Samsung Display, CSOT, LG Display, and BOE make OLED screens for smartphones and smaller products. Most manufacturers also tend to restrict OLED tech to their largest, most feature-packed range, fueling the perception of OLED being expensive.

Follow Onsitego on Facebook, Instagram, Twitter, and YouTube to get the latest news, reviews, maintenance tips, and videos about your favourite gadgets and appliances.

If you’ve ever begun searching for a new computer screen, chances are you’ve probably come across the term IPS. It’s at this point that you may be asking yourself, what is an IPS monitor? And how do I know if an IPS monitor is right for me?

So, why is this important? A monitor’s panel technology is important because it affects what the monitor can do and for which uses it is best suited. Each of the monitor panel types listed above offer their own distinctive benefits and drawbacks.

Choosing which type of monitor panel type to buy will depend largely on your intended usage and personal preference. After all, gamers, graphic designers, and office workers all have different requirements. Specific types of displays are best suited for different usage scenarios.

The reason for this is because none of the different monitor panel types as they are today can be classified as “outstanding” for all of the attributes mentioned above.

Below we’ll take a look at how IPS, TN, and VA monitors affect screen performance and do some handy summaries of strengths, weaknesses, and best-case uses for each type of panel technology.

IPS monitors or “In-Plane Switching” monitors, leverage liquid crystals aligned in parallel to produce rich colors. IPS panels are defined by the shifting patterns of their liquid crystals. These monitors were designed to overcome the limitations of TN panels. The liquid crystal’s ability to shift horizontally creates better viewing angles.

IPS monitors continue to be the display technology of choice for users that want color accuracy and consistency. IPS monitors are really great when it comes to color performance and super-wide viewing angles. The expansive viewing angles provided by IPS monitors help to deliver outstanding color when being viewed from different angles. One major differentiator between IPS monitors and TN monitors is that colors on an IPS monitor won’t shift when being viewed at an angle as drastically as they do on a TN monitor.

IPS monitor variations include S-IPS, H-IPS, e-IPS and P-IPS, and PLS (Plane-to-Line Switching), the latter being the latest iteration. Since these variations are all quite similar, they are all collectively referred to as “IPS-type” panels. They all claim to deliver the major benefits associated with IPS monitors – great color and ultra-wide viewing angles.

When it comes to color accuracy, IPS monitors surpass the performance of TN and VA monitors with ease. While latest-gen VA technologies offer comparative performance specs, pro users still claim that IPS monitors reign supreme in this regard.

Another important characteristic of IPS monitors is that they are able to support professional color space technologies, such as Adobe RGB. This is due to the fact that IPS monitors are able to offer more displayable colors, which help improve color accuracy.

In the past, response time and contrast were the initial weakness of IPS technology. Nowadays, however, IPS monitor response times have advanced to the point where they are even capable of satisfying gamers, thus resulting in a rising popularity in IPS monitors for gaming.

With regard to gaming, some criticisms IPS monitors include more visible motion blur coming as a result of slower response times, however the impact of motion blur will vary from user to user. In fact, mixed opinions about the “drawbacks” of IPS monitor for gaming can be found all across the web. Take this excerpt from one gaming technology writer for example: “As for pixel response, opinions vary. I personally think IPS panels are quick enough for almost all gaming. If your gaming life is absolutely and exclusively about hair-trigger shooters, OK, you’ll want the fastest response, lowest latency LCD monitor. And that means TN. For the rest of us, and certainly for those who place even a modicum of importance on the visual spectacle of games, I reckon IPS is clearly the best panel technology.” Read the full article here.

IPS monitors deliver ultra-wide 178-degree vertical and horizontal viewing angles. Graphic designers, CAD engineers, pro photographers, and video editors will benefit from using an IPS monitor. Many value the color benefits of IPS monitors and tech advances have improved IPS panel speed, contrast, and resolution. IPS monitors are more attractive than ever for general desktop work as well as many types of gaming. They’re even versatile enough to be used in different monitor styles, so if you’ve ever compared an ultrawide vs. dual monitor setup or considered the benefits of curved vs. flat monitors, chances are you’ve already come into contact with an IPS panel.

TN monitors, or “Twisted Nematic” monitors, are the oldest LCD panel types around. TN panels cost less than their IPS and VA counterparts and are a popular mainstream display technology for desktop and laptop displays.

Despite their lower perceived value, TN-based displays are the panel type preferred by competitive gamers. The reason for this is because TN panels can achieve a rapid response time and the fastest refresh rates on the market (like this 240Hz eSports monitor). To this effect, TN monitors are able to reduce blurring and screen tearing in fast-paced games when compared to an IPS or VA panel.

On the flip side, however, TN panel technology tends to be ill-suited for applications that benefit from wider viewing angles, higher contrast ratios, and better color accuracy. That being said, LED technology has helped shift the perspective and today’s LED-backlit TN models offer higher brightness along with better blacks and higher contrast ratios.

Today’s maximum possible viewing angles are 178 degrees both horizontally and vertically (178º/178º), yet TN panels are limited to viewing angles of approximately 170 degrees horizontal and 160 degrees vertical (170º /160º).

In fact, TN monitor can sometimes be easily identified by the color distortion and contrast shifting that’s visible at the edges of the screen. As screen sizes increase, this issue becomes even more apparent as reduced color performance can even begin to be seen when viewing the screen from a dead-center position.

For general-purpose use, these shifts in color and contrast are often irrelevant and fade from conscious perception. However, this color variability makes TN monitors a poor choice for color-critical work like graphic design and photo editing. Graphic designers and other color-conscious users should also avoid TN displays due to their more limited range of color display compared to the other technologies.

TN monitors are the least expensive panel technology, making them ideal for cost-conscious businesses and consumers. In addition, TN monitors enjoy unmatched popularity with competitive gamers and other users who seek rapid graphics display.

Vertical alignment (VA) panel technology was developed to improve upon the drawbacks of TN. Current VA-based monitors offer muchhigher contrast, better color reproduction, and wider viewing angles than TN panels. Variations you may see include P-MVA, S-MVA, and AMVA (Advanced MVA).

These high-end VA-type monitors rival IPS monitors as the best panel technology for professional-level color-critical applications. One of the standout features of VA technology is that it is particularly good at blocking light from the backlight when it’s not needed. This enables VA panels to display deeper blacks and static contrast ratios of up to several times higher than the other LCD technologies. The benefit of this is that VA monitors with high contrast ratios can deliver intense blacks and richer colors.

Contrast ratio is the measured difference between the darkest blacks and the brightest whites a monitor can produce. This measurement provides information about the amount of grayscale detail a monitor will deliver. The higher the contrast ratio, the more visible detail.

These monitors also provide more visible details in shadows and highlights, making them ideal for enjoying videos and movies. Th