cleaning a lcd screen manufacturer

Industrial LCD displays and computer monitors are generally very low maintenance, but they do need a good cleaning every once in a while to make the viewing experience more enjoyable and extend their lifespan. But it’s important that you learn the proper ways to clean LCD screens to avoid damaging them in the process. Keep reading to learn how to clean a monitor screen the right way, so that you can get the most use out of it and remove smudges, dirt, and germs.

Cleaning your computer screen the wrong way could actually damage it and lead to expensive repairs or replacements. To avoid this type of headache, here are some tips on how to clean a monitor screen the right way.

Computers usually come with special care instructions from the manufacturers that explain in detail the proper ways to care for your device and keep it clean. Before setting up your device, make sure to read through the care instructions carefully and follow them closely. If you have any questions or need further assistance, you can contact the manufacturer directly.

Make sure to turn the monitor off before you start cleaning it as wiping it with a damp cloth while it’s on can damage the pixels. Plus, it’s easier to see the dust, smudges, and dust particles when the screen is off and completely black. That way, you can make sure you get a thorough clean without damaging the screen. Turning off touchscreen devices before cleaning is also highly recommended so you can avoid accidental touches that perform the wrong actions or functions.

LCD screens have protective anti-glare and anti-reflective coatings on them to improve visibility. Touchscreens also have oleophobic coatings that prevent fingerprint oil smudges from appearing on the screen. Store-bought glass cleaners contain harsh chemicals such as alcohol and ammonia, which can penetrate the surface of the screen and severely damage its internal mechanism after wearing down the protective coatings. It’s best to stay away from using household cleaners on your industrial LCD displays unless you have the greenlight from the manufacturer.

Canned air is incredibly effective at blasting away dust particles, crumbs, hairs, and any other organic materials that can become stuck to your screen or lodged between the keys on your keyboard. This prevents the particles from scratching the surface of the screen.

Microfiber cloths are also a great option because they usually have grooves that gently capture and remove stuck-on particles while also removing smudges on the screen without damaging them.

If blasting the screen with canned air or wiping it down with a microfiber cloth doesn’t work, then your next best option is cleaning it with distilled water. Unlike tap water, distilled water isn’t fortified with mineral deposits that can scratch or damage industrial display monitors. Many manufacturers advise against spraying the water directly onto the screen for obvious reasons. Instead, spray a small amount onto a microfiber cloth until it’s just damp and gently spot wipe the parts of the display that need it.

Some manufacturers of industrial computer monitors also sell special screen cleaners that are meant to go along with their products. If you’re lucky, they might even be included with your original purchase. These are light cleaning solutions that effectively remove dirt, grime, and dust from your screen for optimal functionality and usability. After applying a cleaning solution to your screen, make sure to let it dry completely before resuming usage. Otherwise, you’re just going to smudge the screen again if it’s a touchscreen.

For more tips on how to clean a monitor screen and keep it in tiptop shape, contact Nauticomp Inc. We’re one of the leading suppliers of industrial computer monitors and displays around the globe.

cleaning a lcd screen manufacturer

Remember when your LCD or OLED display had that brand-new, fresh-out-of-the-box shine, feel and look? You are in the right place if your display is now due for deep cleaning.

Things to consider before cleaning or handling an electronic displayAvoid static by grounding your body and following proper ESD-safe handling techniques.

A microfiber cloth and distilled water is recommended for cleaning the display glass. Use Qtips and Isopropyl alcohol for cleaning the printed circuit board.

Although distilled water is recommended for wiping the display glass, you can use a cleanser developed explicitly for cleaning displays. However, do not spray it directly onto the display. Spray a tiny amount of the cleaner onto a microfiber cloth first to avoid getting any cleaning solution inside the display.Never spray any liquids directly onto the display.A spray is too hard to control and confine. The fluids can seep into the other display layers or surrounding components and cause irreversible liquid damage.

Only use a microfiber cloth and don"t use chemicals to clean a resistive touchscreen.Disconnect the display from the power supply and remove any screen protectors or liners.

Isopropyl alcohol (IPA) is widely used to clean printed circuit boards (PCBs). Use a Q-tip or soft small bristle brush for scrubbing a PCB, and never use a paintbrush.Gently rub a Q-tip in Isopropyl alcohol.

Cleaning soldering residue on LCD with Isopropyl alcohol and a Q-Tip.Cleaning residue around soldering elements is not necessary if Newhaven Display performed the soldering.

Cleaning your electronic display is a simple task. However, it is essential to consider these steps to handle and clean it properly. You should now have a better understanding of what cleaning products are safe to use, how to clean the display screen glass, how to clean touchscreens and how to clean soldering residue.

cleaning a lcd screen manufacturer

Regularly cleaning your LCD monitor keeps it free of dust, smudges, and germs. Wiping with a dry microfiber cloth is the safest cleaning option and is surprisingly effective at removing germs. You may need to use a dampened microfiber cloth to get rid of stubborn smudges and stuck-on debris, though. If you"re worried about germs, consider using a vinegar and water solution or a Lysol wipe on the screen. Be sure to check the device’s user manual first to make sure it’s okay to use liquids!

cleaning a lcd screen manufacturer

If any marks remain, moisten the cloth with LCD cleaner, and then gently stroke the cloth across the display in one direction, moving from the top of the display to the bottom.

Notice: Do not use any of the following chemicals or any solutions that contain them: acetone, ethyl alcohol, toluene, ethyl acid, ammonia, or methyl chloride. If you have a different chemical or solution and are not sure whether it is suitable, do not use it. Using any of the chemicals in the previous list may cause permanent damage to the LCD screen. Some commercial window cleaners contain ammonia and are, therefore, unacceptable.

Note: Many cleaning solutions are sold specifically as LCD cleaners. You can use these to clean LCD screens on Dell laptops. Alternately, you may use a 50/50 isopropyl alcohol and water mixture. Microfiber cloths such as those used to clean eyeglasses are excellent for use with LCDs.

Please visit the support page for your manufacturer to find out how to clean your LCD. The support pages for some manufacturers are listed on the Checking Warranty page.

cleaning a lcd screen manufacturer

LCD Screen Cleaner works on all screens and monitors without leaving any residue. Contains plant-based cleaning agents which safely remove smudges and fingerprints from all your electronic devices. Simply spray and wipe with a microfiber cloth. Alcohol-free, ammonia-free, and streak-free!

cleaning a lcd screen manufacturer

It is always best to follow manufacturer’s suggestions for product care, but generally it is safe to clean an LCD screen using a very soft, 100% cotton cloth, and a mixture of distilled water and clear vinegar. If you prefer buying ready-made products, LCD cleaners are available from electronics shops in spray bottles.

While it might be tempting to use an old tee shirt for a cotton cloth, the seams can potentially scratch the screen. Flannel is the recommended material, and you can visit a fabric shop and buy a yard (0.9 meters) of 100% untreated cotton flannel for very little money. By purchasing this amount of fabric, you’ll be able to cut new cloths when the old one gets dirty. Microfiber cloth is also a good choice.

While many people use isopropyl alcohol in a 50/50 solution with distilled water, some manufacturers warn against this. If you are inclined to use isopropyl rather than vinegar, check with the manufacturer’s website of your LCD product to be sure this is acceptable. Many store-bought LCD cleaners contain isopropyl, and it is generally considered safe and effective.

Otherwise, a 50/50 solution of distilled water and white vinegar can be combined in a spray bottle. Avoid using a bottle that had previous cleaners or agents in it — a new spray bottle can be purchased at the grocery store. Choose a sprayer that is capable of a fine mist.

Cut a piece of cloth large enough to fold into a nice square pad that is a few layers thick. Spray your 50/50 solution on to the surface of the cloth, lightly dampening it. Be sure the cloth isn"t so wet that it will drip down the screen. Do not spray the solution directly on to the LCD screen.

Before you clean an LCD screen, power it off to avoid potential damage. Take your cloth and gently wipe the surface from top to bottom, moving downward in a straight line. When you reach the bottom lift the cloth away and place it at the top again to proceed. Use a very light touch, as pressing against the screen could damage its pixels.

Do not move the cloth in a circular motion to rub out fingerprints or smudges. The solution will do the trick. If you have to cover an area twice, wait until its dry, then repeat the process. The vinegar should cut through any dirt or body oils deposited on the screen. By following this simple procedure, your screen should stay clear and unblemished.

Never use paper towels, napkins, or tissues to clean an LCD screen. These materials will either scratch the screen or leave debris. Household cleaners and ammonia should also be avoided, as they can leave a white cast, ruining the screen’s finish.

cleaning a lcd screen manufacturer

This approach does not bode well for cleaning the LCD screens of you digital signage system, though. And yes, the screens will need cleaned. One of the first responses users have when they see a new signage screen installed is to check if it is a touch screen. Whether it is or not, the finger prints are just the same. There also is a significant portion of the population that can not point to something on a screen without touching the screen with their finger.

A great way to see how much of a cleaning your screen requires is to turn it off. The light reflecting off the surface will highlight all of the smudges, fingerprints, and smears, usually in alarming quantities.

This is exactly what NOT to do. Ammonia based cleaners can damage any special coating that is on the screen. Depending on the brand, paper towels are fairly abrasive, to go along with the amount of lint debris they tend to leave behind.

Another tendency is to put some elbow grease into those tough to remove smudges. If they don’t rub off at first, you may be inclined to scrub harder. Doing so can damage the pixels in the screen.

LCD screens are designed to be cleaned with a delicate touch. Most light marks can be removed by gently wiping the screen with a dry microfiber cloth. For more stubborn smudges, you may need to dampen the cloth.  There are several cleaning solutions you can purchase, or for the Do-It-Yourselfer, use a 50/50 mixture of distilled water and vinegar. Do not spray the solution directly on the surface of the display. It could run down inside the display and cause damage to the electrical components. A good rule of thumb is liquid and electricity do not mix. It is best to spray the solution lightly onto the microfiber cloth and then wipe the screen. Repeat if necessary.

cleaning a lcd screen manufacturer

Responsible for performing installations and repairs (motors, starters, fuses, electrical power to machine etc.) for industrial equipment and machines in order to support the achievement of Nelson-Miller’s business goals and objectives:

• Perform highly diversified duties to install and maintain electrical apparatus on production machines and any other facility equipment (Screen Print, Punch Press, Steel Rule Die, Automated Machines, Turret, Laser Cutting Machines, etc.).

• Provide electrical emergency/unscheduled diagnostics, repairs of production equipment during production and performs scheduled electrical maintenance repairs of production equipment during machine service.

cleaning a lcd screen manufacturer

Screens can scratch easily, and even paper towels and tissues contain fibers that can do damage. “Your best bet is to use a soft, anti-static microfiber cloth—the kind used to clean eyeglasses and camera lenses—and wipe in a circular motion,” says John Walsh, who cleans more than 250 TVs a year in his role as a CR photographer. (Some TV manufacturers will include a cloth for this purpose.) “Gently wipe the screen with a dry cloth to remove dust and other debris, but don’t press too hard,” he says.

You may also want to wipe down the TV’s cabinet, and make sure dust isn’t clogging the vents that help dissipate heat. If the TV is on a stand and not tethered to the wall, Walsh suggests cleaning with one hand while supporting the TV with the other to prevent the set from tipping over. However, CR strongly recommends anchoring all stand-mounted TVs using anti-tipping straps designed for this purpose.

If there are hard-to-remove stains, you can dampen the cloth slightly with distilled water and gently clean the screen. Don’t spray water directly onto the screen; that could cause a shock or component failure if water seeps into the inner workings of the set.

For the most stubborn stains, you can try using a solution of very mild dish soap highly diluted with water, once again applied to the cloth and not to the TV itself. (As a guideline, Panasonic used to recommend a 100:1 ratio of water to soap.) LCD screens, in particular, are very sensitive to pressure and can scratch easily, so don’t press hard.

cleaning a lcd screen manufacturer

Perhaps you’ve noticed that cleaning a display screen is not always as easy you’d assume. You’ve tried damping a paper towel with tap water and brushing it across your screen, only to be left with smudges, smears, and a few stubborn globs. Don’t worry… you’re not alone. This seems to be a common experience for the ever-growing number of digital device owners.

We would like to go over the proper cleaning methods so that you understand what works (and what doesn’t), and so you can relay that information to whoever might find it useful – whether that be you, your customers, your employees, or your father-in-law who just discovered the brand new world of handheld digital devices. The processes discussed here are helpful for nearly all displays, including touch screens and those with cover lenses.

Let’s go over the items you’ll need in order to clean your LCD screen. Be sure you have some kind of microfiber cloth and a cleaning solvent of some kind. As mentioned, you may already be well aware that the paper towel method isn’t effective, and that it can even cause scratches. This is why a soft cloth (or a microfiber cloth) will be a much better tool for cleaning. It is softer and does not leave particles behind that break away from the cloth, much like a paper towel does. If a dry cloth alone is not enough to get your screen up to standards, then you may want to apply the cleaning solvent.

Of course, not all solvents are created equal. Some of them work better than others for certain applications. Depending on the type of LCD display you have, you will want to do your due diligence. Many people will use distilled water as a solvent, as it has been known to be the least damaging to LCD screens. Granted, you can’t just poor it on there all willy-nilly. You don’t want to risk damaging any of the electrical components within the device.

You also should be cautious about using alcohol or ammonia based solvents, as they are capable of causing long-term damage to LCD screens, making the screen brittle and susceptible to cracking. They have also been known to cause discoloration issues. For best results, you should search for an LCD-safe solution. This, plus using the proper methods, will be the best for your LCD screen’s longevity. Here is a table that you can refer to in your search for an acceptable solvent:

cleaning a lcd screen manufacturer

Remember when your computer LCD display had that brand-new, fresh out-of-the-box shine? If it"s looking a little dull lately, it might be time to give it a good cleaning. Here"s how:

Step 2:Gently wipe the dust from the surface of the display using a dry, lint-free cloth, like a microfiber cloth. Remove any tags that may be on the cloth to avoid scratching the display with the tags.

If you prefer, you can use a cleanser made specifically for cleaning LCD displays, but do not spray it directly onto the display. Spray a small amount of the cleaner onto a microfiber cloth first, to avoid getting any cleaning solution inside the display.

cleaning a lcd screen manufacturer

As the weather warms, it"s time for everyone"s "favorite" pastime: spring cleaning. While you"re dusting off the shelves and shoveling out a winter"s worth of detritus, spare a moment to check your TV. Dust and grime can accumulate there, and over time it can become more and more noticeable. And if you have children, there may be an array of fingerprints and other smears on the screen.

The short version? Don"t use liquids, don"t press too hard, don"t use any traditional cleaners. Microfiber cloths are good, but be gentle. Modern TVs are predominantly plastic and therefore far easier to scratch than windows or your phone.

Want the longer version? Here"s what the top TV manufacturers say about cleaning their screens:Cleaning your 4K, OLED, or LED TV screen with a soft, dry cloth is recommended. The goal here is to avoid scratching the screen. Gentle, circular motions tend to give better results, since the circular motion hits each area from several angles in a single swipe.

Caution: Don"t spray water or other liquids directly on the TV, as electric shock could occur.Turn the TV off and let it cool down for a few minutes before unplugging it.

To clean the frame and screen, gently wipe it with a microfiber cleaning cloth. Make sure to wipe the TV frame and screen as gently as possible. TV screens are fragile and can be damaged when pressed too hard.

Important: Never use any type of window cleaner, soap, scouring powder, wax, or any cleanser with solvents such as alcohol, benzene, ammonia, or acetone. Never use abrasive pads or paper towels. If you do, you can scratch the screen or strip the anti-glare coating off the screen and cause permanent damage. Never spray water directly onto the TV. Make sure to wipe the TV as gently as possible. TV screens are fragile and can be damaged when pressed too hard.Gently wipe the screen or the exterior with a dry, soft cloth, such as an eyeglass cleaner.

For inks from oil markers on the screen, soak a cloth in a non-soap synthetic cleanser diluted (by less than 1% ) with water. Squeeze the cloth tightly to eliminate excess liquid, then wipe gently to remove the ink. Use non-soap cleansers cautiously because it may cause environmental problems when disposed improperly.

So why not Windex? Regular Windex is formulated for glass windows, plus a few other surfaces. It contains ammonia and alcohol, not the friendliest of chemicals. S. C. Johnson doesn"t explicitly say not to use Windex on TVs, but it offers Windex Electronics wipes and cleaners, so infer what you will. The better screen cleaners will clearly state that they do not contain alcohol or ammonia.

At last count, I found a billion companies making TV screen cleaners. Almost all of these are something like 99 percent water, 1 percent other stuff. Years ago I tested a handful and found them, on average, to work well enough. If you don"t have luck with a simple cloth and possibly distilled water, a screen cleaner is worth a try, and as a bonus you can also use it for your laptop, tablet and cell phone screens. Plus, they come with a microfiber cloth. If they don"t clearly state they don"t contain alcohol and ammonia, however, I would skip them.

So yeah, cleaning your TV is a good idea. But just remember that they"re exceptionally fragile. Why risk marring their surface by using cleaning methods the companies themselves don"t advise? If you damage your screen with cleaners, you won"t be able to fix it.

My advice? Get a nice microfiber cloth (if your TV didn"t come with one), and use that. If that doesn"t fix your smudges, try a cloth moist with water. Don"t press too hard. There"s less than a millimeter between your finger and a broken TV.

Screen cleaning kits are fine, though most people won"t need them. Remember, like all TV accessories, the store is selling them because they probably make more profit on that $20 kit than on a $500 TV.

As well as covering TV and other display tech, Geoff does photo tours of cool museums and locations around the world, including nuclear submarines, massive aircraft carriers, medieval castles, epic 10,000 mile road trips, and more. Check out Tech Treks for all his tours and adventures.

He wrote a bestselling sci-fi novel about city-size submarines, along with a sequel. You can follow his adventures on Instagram and his YouTube channel.

cleaning a lcd screen manufacturer

Use a non abrasive cleaning solution, diluting isopropyl alcohol (not rubbing alcohol, as it may contain oil) into a solution of 50% alcohol and 50% with distilled water water (or purified/bottled water). You could also buy a cleaning solution that does not contain bleach, ammonia, or vinegar.

Before you start, power-off and unplug your monitor. Spray the cleaning solution on a soft cloth (for example an old T-shirt), lint-free microfiber cloth, or some other very soft cloth. A large cloth is best, since it will help reducing the risk of leaving streaks across the display from finger pressure.

Starting from the top, wipe the screen in one direction until you have cleaned the entire screen. Apply light, but distributed pressure. Repeat if necessary. Let it air dry.

cleaning a lcd screen manufacturer

Q: I have a new LCD television, and I"m not sure how to clean it. With my old tube set, I just spritzed it with Windex, but the surface of my new TV isn"t glass.

A: "We recommend using LCD cleanser that can be purchased at any electronics store," says a customer service tech for Westinghouse, a manufacturer of popular LCD televisions. The cleaner can be found in both spray and wipe form. But what exactly goes into these LCD solutions?

Kai Hui of MG Chemicals, makers of one of many available LCD cleaners, explains, "The main ingredient in most wipes on the market is water. There needs to be a small percentage of isopropyl alcohol (IPA) to help get rid of the grease from busy fingers." Some LCD cleaning solutions may include up to 50 percent IPA, according to Hui, but any more than that could damage the screens.

Since I"d never suggest you spend more money than you have to, I"d start with a clean, soft cloth and regular ol" tap water. You can add just a capful of isopropyl alcohol to a glass of water if you need something to help loosen the greasy gunk on the screen, so it can wipe off more easily. Get the cloth damp and then apply to the screen instead of splashing the screen and trying to wipe up the liquid; and always -- always -- use a clean cloth, as tiny, hard particles trapped in the fibers can scratch the surface of your screen.

cleaning a lcd screen manufacturer

The television screen is what everyone sees first, but don’t forget these other key areas, not to mention the area around your unit. “It can also help to clean the furniture and carpets around the TV to prevent dust and hair from getting into it,” says Williams.

The remote control is handled regularly. This is the one time when harsh chemicals can be used sparingly. Follow the manufacturer owner’s manual instructions first, but if sanitizing is needed, use a cleaner that’s at least 70 percent alcohol, according to the Centers for Disease Control (CDC) recommendations. (Basic drugstore isopropyl alcohol works well for this.)

Start the remote control cleaning by removing the batteries. As with the TV screen recommendations, you’ll want to avoid spraying directly onto the surface, as this could cause the device to malfunction. Dampen a clean microfiber cloth and rub gently on the top and the underside of the remote control. For hard-to-reach gunk that’s jammed between the buttons, try a cotton swab dipped in a small amount of the cleaning solution. Make sure to let it dry thoroughly before replacing the batteries and using it again.

When figuring out how to clean a TV screen, selecting the safest cleaning solution is key, but it’s also important to know what cleaning products to avoid. Keep in mind that not only should you skip cleaning with certain products, you should also avoid spraying them in close proximity to the TV.

Both Panasonic and Samsung both have lengthy “avoid” lists that include harsh chemicals such as wax, cleaning fluid, acetone, benzene, alcohol, thinner, mosquito repellent and insect spray (really!), lubricant, solvent and undiluted mild dish soap. These can, as Williams says, “cause clouding and can wear away your TV’s anti-glare coating.”

In terms of what to use, Samsung recommends “monitor cleaner only” (also called TV screen cleaner). Panasonic suggests “one part mild liquid dish soap diluted by 100 times the amount of water.” To make this cleaning solution, add a scant teaspoon of liquid dish soap to two cups of water, stirring well to dissolve.

Williams likes TV cleaning kits for their ease of use. “A TV kit will be your safest option for cleaning a TV,” he says. “These kits will come with everything you need to get your TV looking new, like screen-cleaning solvent and a fast-drying microfiber cloth.” You can find TV cleaning kits and cleaning products designed for flat-screen TVs at electronics stores or on Amazon.

Some people swear that only distilled water is useful as cleaning spray for their delicate electronics. Although Williams does not necessarily recommend using distilled water, if you know for a fact you have hard water in your area, you may want to try the distilled water route and see if you notice a difference. Hard water, which has high levels of calcium and magnesium, may leave a film or residue when it’s used for cleaning. Before you spray water to clean TV screens, try experimenting with tap water on a less-important screen, like an old cell phone, to assess the results.

If you can picture the hulking tube TVs (also known as CRTVs) of yore, you may also remember how delightfully easy they were to clean—a few spritzes of window cleaner and some wipes with paper towels and you were good to go—no special microfiber cloth required. But modern TVs with fancier technologies like LCD, OLED, and plasma call for gentler techniques. “Avoid using chemicals like alcohol, ammonia or acetones when cleaning your TV. These cleaners were safe to use for previous generations of TVs with glass panels, but as the hardware changes with time, the cleaning methods do too,” says Williams. Since some multi-purpose and glass cleaners are made with ammonia, skip the Windex.

Modern TVs are often smart TVs but the cleaning tips are the same as the ones for LCD, OLED and plasma TVs. The microfiber cloth is your TV screen’s best friend. “The majority of TVs you purchase today will be smart TVs, and the cleaning process is the same as TVs without smart capabilities,” Williams says.

cleaning a lcd screen manufacturer

When it comes to cleaning, flat-screen TVs and LCD screens require special care and a gentle touch. With the wrong technique, you can easily scratch the screen or damage the surface"s antiglare coating. Even rubbing too hard can cause pixels (the tiny dots that compose images on computer monitors and TV screens) to burn out and stop working permanently. Most household cleaning products are too harsh to use on electronic devices with LCD or OLED screens, so choose your TV cleaning strategy carefully. These tips on how to clean a TV screen will help protect your device while ridding it of dust, smudges, fingerprints, and streaks.

To avoid damage to your TV while cleaning, only use gentle products. Never wipe the screen with paper towels, abrasive sponges, or coarsely woven rags, which can cause scratches. Instead, use high-quality, finely woven microfiber cloths to clean TV screens, recommends cleaning expert Leslie Reichert.

You should also avoid cleaning products that contain alcohol or ammonia. These types of cleaners can remove antiglare coatings and cause images to become cloudy or distorted. A simple swipe with a microfiber cloth ($9 for 5, Amazon) is typically all that"s needed to remove dust and other debris from the screen"s surface. When more than a light dusting is required, however, use the guidelines below for the best way to clean a TV.

Practice preventative measures so you won"t have to clean TV screens often. Keep food, drinks, and kids away from TV and computer screens to eradicate risks of messy splatters and fingerprint smudges. During your weekly house cleaning, lightly dust the screens with a microfiber cloth to prevent dust buildup.

cleaning a lcd screen manufacturer

The TFT (Thin Film Transistor) LCD display screens of computers, laptops, televisions, and other devices are delicate. They need to be handled and maintained properly to keep them in good shape. Otherwise, the lack of maintenance can lead to glitches and other problems that could affect the entire device.

As a business owner, you should be aware of how to take care of the materials you use in your products. This way, you can assure your customers of quality goods and services. Here are some things to keep in mind when cleaning and maintaining TFT LCD display.

Avoid using abrasive materials like paper towels and newspaper in cleaning TFT LCD screens as they may scratch the surface. Instead, opt for a lint-free cloth. To remove dirt, you may use plain water or add a small amount of vinegar. However, don’t spray the liquid directly on the monitor, and remember to put gentle pressure when wiping the screen.

Though TFT LCDs look like glass, it’s important to remember that it’s plastic so that you can treat it as that. Given this, don’t use glass cleaners that have ammonia or alcohol in it as it could be harmful to the TFT LCD.

Don’t put heavy objects on top of TFT LCD module as it could damage the material and its components. Make sure it’s safe from anything that might scratch, wet, or hit it as the crystals sandwiched between two thin plastic sheets are electronically sensitive. Also, it shouldn’t be able to absorb any moisture as it won’t go away by itself and it might damage the entire display.

If you display laptops in your store, make sure that you also clean the keyboards and not just the LCD screen. This is because folding down the lid exposes the screen to keyboard dust, dirt, and other contaminants. So, it’s necessary to keep the entire device clean to protect the TFT LCD.

These are only some of the ways to properly handle TFT LCD screens. It’s best to ask your supplier for tips on how to take care of the materials to ensure that they’re always in top condition.

cleaning a lcd screen manufacturer

Back when you used to have CRT monitors and TVs, you could clean them with almost anything. The screen was made out of glass and nothing else. That’s no longer the case with today’s LCD and OLED displays.

The modern display is a sensitive device that requires special care. You can easily damage a touchscreen if you clean it using a rough sponge or an aggressive cleaning agent. You’ll eventually scratch the screen and damage its special coatings, and you’ll end up with an inferior device that no longer takes your touch commands. This applies to any laptop, tablet, TV, phone, or another device with LCD, MicroLED, or OLED display.

Most people open the box, take the smart TV or monitor out, plug it in, and that’s that. They ignore the manufacturer’s instructions. Don’t skip reading those instructions. Some manufacturers offer specific cleaning product recommendations to be used with their products.

For example, Dell might recommend using 70% isopropyl alcohol to clean one of their PC monitor models, while Samsung might recommend using nothing other than a dry microfiber cloth. Despite general recommendations, you should always prioritize the manufacturer’s specific instructions. This will also help you with warranty claims.

Some screens, especially touch screens, have special coatings for protection and to reduce the amount of reflection and glare. Harsh chemicals will remove those coatings and even damage the material of the display. Don’t use any household cleaning agents.

Stay away from glass cleaning products and anything that contains ammonia, chlorine, and even alcohol. Isopropyl alcohol is sometimes okay to use if specified by the manufacturer. Just make sure you pay attention to the percentage, which is usually 70% or 90%.

If you’ve been cleaning your TV or monitor with one of the aforementioned solutions, stop. Using them a few times might not cause any visible damage, but over time they’ll leave streaks once the protective coating is gone.

When you aren’t sure what’s safe to use, use canned air and microfiber cloths. Canned air is great for cleaning computer hardware, keyboards, as well as monitors, and TVs. It can’t cause any damage to the surface of the screen whether you’re cleaning a tablet, an OLED monitor, or an old school glass TV.

Dust gathers on the surface of your screen, especially around the edges, so start by blowing it off with compressed air. Use a high-quality microfiber cloth to move the stubborn dust particles when the compressed air isn’t enough. All you need is a light touch. Don’t press too hard on the display or you can damage it.

It’s very important to use microfiber cloth only. It’s soft enough not to scratch the screen or damage any of the protective coatings. Don’t use paper towels or tissues because they contain little loose fibers that can cause small scratches.

Sometimes canned air and dry microfiber cloth aren’t enough to remove stubborn particles. Don’t press extra hard when something dry is stuck to the display. Use distilled water instead. Tap water would also work, but we don’t recommend it because it contains all sorts of minerals that will leave streaks behind.

Take note that most manufacturers will tell you to avoid using any liquids, but sometimes you just don’t have a choice. Distilled water is safe to use as long as you just dampen the microfiber cloth enough to remove that pesky spot of dirt. Don’t spray it or splash it directly on your screen. Spray it on the cloth until it’s slightly damp.

Use a dry microfiber cloth to wipe the corners of the display and remove the dirt and oils from the screen. Use a light touch. Don’t press hard when you find a stain. This can cause serious damage.

Clean the back of the TV or monitor. You’ll find a lot of dust there. Fortunately, it’s all plastic, so you can use a multipurpose cleaning solution as long as you don’t touch the screen.

Instead of using distilled water with a microfiber cloth, you can opt for one of the many professional cleaners available on the market. It’s important to buy a cleaning kit or cleaning solution that is odorless and without any alcohol or toxins that could damage a TV or monitor display. So take a look at some of the best and safest cleaning solutions we’ve found.

WHOOSH! is an alcohol-free display cleaner. It’s suitable for all types of screens, whether they’re LCD, OLED, LED, or CRT. You can also use it to clean your mobile devices. In fact, this is the same display cleaner that Apple uses in its stores. It’s also completely odorless, so it won’t leave any residues.

EVEO is a screen cleaner safe to use on all types of TVs, monitors, and touchscreen devices. It’s great for removing greasy fingerprints and other stubborn smudges. Just remember not to press hard and use the microfiber cloth that’s included in the package. You can also use EVEO to clean other electronic gadgets.

If you don’t want to use sprays or liquids, try the lens and screen cleaning wipes from Care Touch. They’re individually packed, so when you need to clean a display, you always have one handy.

Care Touch wipes contain some isopropyl alcohol, but not in an amount that should be dangerous. The wipes are made for cleaning all types of screens without damaging the anti-reflection coating. As a bonus, you can also use these wipes on sunglasses and camera lenses.

The more often you clean your TV and computer monitor, the less you’ll have to deal with a build-up of grime and dust. This way a microfiber cloth should also be enough because you won’t have any tough dirt spots. So clean your screens regularly and keep them sparkling.