lcd panel grades factory

Our industrial display touch screen monitors can help your factory personnel and workshops handle complex industrial tasks on intuitive factory grade touch screens. Our wide range of rugged LCD displays with multi-touch and various touch technologies such as resisitive, SAW, optical imaging, projected capacitive and infrared are tough and suitable for virtually any industrial applications. We can help you choose the best touch screen technology and solution that fits best with your needs, and close the gap between your vision and implementation of the digital factory.

The LCD panel can be divided into three grades A, B and C according to its quality, and the classification is based on the number of bad points. However, there are no relevant mandatory provisions in the world, so the grade standards of various countries and regions are also different. Generally, if the number of bad points of LCD panel is less than 5, it is grade A panel. If the number of bad points is more than 5 and less than 10, it belongs to grade B panel. If the number of bad points is more than 10, it belongs to grade C panel. In principle, grade A panels are most suitable for the production and manufacturing of displays, but it is inevitable that liquid crystal panels produce grade B panels, so most of these grade B panels will be digested by miscellaneous display manufacturers. The grade C panel is completely not suitable for the production and manufacturing of displays. Most of them are cut into small liquid crystal panels and used in other fields. However, very few LCD manufacturers will use class C panels. There has been a storm of low-cost and low-quality LCD disturbing the market before.

A wide variety of grade a lcd panel options are available to you, You can also choose from original manufacturer, odm and agency grade a lcd panel,As well as from tft, ips, and standard.

We offer the largest selection of LCD industrial monitors and touch screens in the world.  We have an impressive line of over 75 off-the-shelf large industrial displays screen sizes up to 75″.   In Addition, we can include even more custom and OEM designs. View our Sunlight Readable, waterproof, panel mount displays, or  16:9 aspect ratio, open frame, 1920 x 1080 full HD, outdoor, and optically bonded monitors. We have a huge variety of the same types in touch screens video displays.

Industrial LCD monitors offer many advantages over commercial-grade displays. Most importantly, they are more rugged than consumer grade monitors!  Our industrial displays feature higher shock and vibration resistance.  Furthermore, use our wide operating temperature options in challenging climate conditions. Robust enclosures are a must in most industrial settings. Additionally, we back them with a full 3-year warranty. Likewise, industrial monitors are available longer than consumer and commercial-grade models. But, Retail models often discontinue within 6 to 18 months.

We can modify TRU-Vu industrial-grade large industrial LCD monitors with a long list of available options to best meet your needs. Moreover,  we provide custom monitor purpose-built solutions.  We will design them and build to your specifications. Most importantly, these are often for the same cost as off-the-shelf solutions.

TRU-Vu offers the largest selection of industrial-grade small LCD monitors and touch screens in the world. Choose from over 125 models of 8.4 inch to 12″ industrial-grade small lcd monitors, including small HDMI monitors, waterproof monitors, Sunlight Readable monitors, 4:3 and 16:9 aspect ratio, panel-mount and custom displays.

TRU-Vu offers over 235 standard, off-the shelf 13.3” to 19” industrial-grade LCD monitors and touch screens. Industrial LCD monitors offer many advantages over consumer or commercial-grade displays. They are more rugged, have higher shock and vibration resistance and can be modified or customized to meet your needs. Industrial and medical-grade monitors, Sunlight Readable, waterproof, open frame monitors and more.

TRU-Vu offers the largest selection of industrial LCD monitors and large touch screens in the world. We have an impressive line-up of over 175 off-the-shelf industrial LCD monitors with large screen sizes from 21.5" to 75". This includes Medical-Grade, Sunlight Readable, open frame, bezel-less, waterproof, 4K, custom and OEM widescreen monitors, with a wide range of configurations and enclosure types.

Industrial-grade monitors and touch screens with standard brightness (250-350 nits) are ideal for use indoors or in environments without sunlight or bright lighting. We offer waterproof monitors, panel mount monitors, custom LCD displays, private label monitors, Medical Grade monitors, outdoor monitors, 16:9 and 4:3 aspect ratio, and more, from 7" to 65" lcd monitor screen sizes.

Our waterproof monitors and water proof touch screens are perfect for use as outdoor monitors, or in industrial settings where high humidity, liquids, and daily wash-downs may exist. Stand-alone or panel mount waterproof enclosures are available in stainless steel, painted steel or aluminum, with protection ratings up to IP68.

Panel mount monitors and panel mount touch screens can be flush-mounted into doors, walls, kiosks and cabinets for improved ergonomics and safety. They are available with standard and high brightness screens, waterproof front face, and 4:3 and 16:9 aspect ratio, in a wide range of sizes and configurations.

Industrial Display Systems provide a wide range of reliable displays from 5.7" to 55" including LCD displays, touch screen panels, outdoor displays and digital signage displays, and a series of industrial monitors including open frame monitors and panel mount monitors, which work perfectly with embedded boards and systems to fulfill various application needs.

A common size for LCDs manufactured for small consumer electronics, basic mobile phones and feature phones, typically in a 1.7" to 1.9" diagonal size. This LCD is often used in portrait (128×160) orientation. The unusual 5:4 aspect ratio makes the display slightly different from QQVGA dimensions.

Half the resolution in each dimension as standard VGA. First appeared as a VESA mode (134h=256 color, 135h=Hi-Color) that primarily allowed 80x30 character text with graphics, and should not be confused with CGA (320x200); QVGA is normally used when describing screens on portable devices (PDAs, pocket media players, feature phones, smartphones, etc.). No set colour depth or refresh rate is associated with this standard or those that follow, as it is dependent both on the manufacturing quality of the screen and the capabilities of the attached display driver hardware, and almost always incorporates an LCD panel with no visible line-scanning. However, it would typically be in the 8-to-12 bpp (256–4096 colours) through 18 bpp (262,144 colours) range.

The first PowerBook, released in 1991, replaced the original Mac Portable (basically an original Mac with an LCD, keyboard and trackball in a lunchbox-style shell), and introduced a new 640×400 greyscale screen. This was joined in 1993 with the PowerBook 165c, which kept the same resolution but added colour capability similar to that of Mac II (256 colours from a palette of 16.7 million).

The high-resolution mode introduced by 8514/A became a de facto general standard in a succession of computing and digital-media fields for more than two decades, arguably more so than SVGA, with successive IBM and clone videocards and CRT monitors (a multisync monitor"s grade being broadly determinable by whether it could display 1024×768 at all, or show it interlaced, non-interlaced, or "flicker-free"), LCD panels (the standard resolution for 14" and 15" 4:3 desktop monitors, and a whole generation of 11–15" laptops), early plasma and HD ready LCD televisions (albeit at a stretched 16:9 aspect ratio, showing down-scaled material), professional video projectors, and most recently, tablet computers.

A widely used aspect ratio of 5:4 (1.25:1) instead of the more common 4:3 (1.33:1), meaning that even 4:3 pictures and video will appear letterboxed on the narrower 5:4 screens. This is generally the native resolution—with, therefore, square pixels—of standard 17" and 19" LCD monitors. It was often a recommended resolution for 17" and 19" CRTs also, though as they were usually produced in a 4:3 aspect ratio, it either gave non-square pixels or required adjustment to show small vertical borders at each side of the image. Allows 24-bit colour in 4 MB of graphics memory, or 4-bit colour in 640 kB.

An enhanced version of the WXGA format. This display aspect ratio was common in widescreen notebook computers, and many 19" widescreen LCD monitors until ca. 2010.

A wide version of the SXGA+ format, the native resolution for many 22" widescreen LCD monitors, also used in larger, wide-screen notebook computers until ca. 2010.

This display aspect ratio is the native resolution for many 24" widescreen LCD monitors, and is expected to also become a standard resolution for smaller-to-medium-sized wide-aspect tablet computers in the near future (as of 2012).

A wide version of the UXGA format. This display aspect ratio was popular on high-end 15" and 17" widescreen notebook computers, as well as on many 23–27" widescreen LCD monitors, until ca. 2010. It is also a popular resolution for home cinema projectors, besides 1080p, in order to show non-widescreen material slightly taller than widescreen (and therefore also slightly wider than it might otherwise be), and is the highest resolution supported by single-link DVI at standard colour depth and scan rate (i.e., no less than 24 bpp and 60 Hz non-interlaced)

A version of the XGA format, the native resolution for many 30" widescreen LCD monitors. Also, the highest resolution supported by dual-link DVI at a standard colour depth and non-interlaced refresh rate (i.e. at least 24 bpp and 60 Hz). Used on MacBook Pro with Retina display (13.3"). Requires 12 MB of memory/bandwidth for a single frame.

NEC"s 46" UN462A sets the standard for quality color reproduction in video wall environments. Direct LED backlighting and factory calibration for intensity, gamma and RGB allows for ideal panel uniformity and an easy out-of-the-box experience. This display is integrated with the proprietary SpectraView Engine, which not only allows for ultimate color control but also allows for increased color calibration capabilities including white copy, self calibration to an external sensor and manual CIE chromaticity adjustment for maximum control when color matters most. This display also includes both a DisplayPort and an HDMI Out connections for daisy chaining signals up to 4K UHD. This new generation of display received a full chassis upgrade with a 3.5mm bezel gap, faster processing times, evolved daisy chain performance, and new TileMatrixing capabilities.

Industrial-strength, premium-grade panelwith additional thermal protection, internal temperature sensors with self-diagnostics and fan-based technology, allow for 24/7 operation