1g tiny210 sdk-1 arm11 board 7 tft lcd for sale

The Tiny210 Single Board Computer is a high-performance controller board introduced. It is designed based on the S5PV210 microcontroller, 512MByte DDR2 RAM, 256MByte Nand Flash, RTC, Audio and net on board. It has integrated RS232, USB, Ethernet, Audio In/Out, Keyboard,LCD, HDMI, TV out, camera in, SDIO WiFi Module, SD card and more other functions on board. So many hardware resources provided by the expansion board, it becomes a solid reference board for customer design. We also offers a complete software development package to customers. The board supports linux2.6.35, Android2.3 operating system and is provided with complete basic drivers which enable a quick channel to evaluate the Samsung S5PV210 processor and customize application software. Itwould be an ideal development platform for multimedia and communication applications. Hardware Features: CPU Samsung S5PV210, based on CortexTM-the A8, 1 GHz frequency Inside PowerVR SGX540 high-performance graphics engine 2 D / 3 D graphics acceleration Support MAX 1080 p @ 30 FPS hardware decoding video smooth playback, format for MPEG4, h. 263, h. 264, etc Support MAX 1080 p @ 30 FPS hardware encoding (mpeg-2 / VC1) video input DDR2 RAM: Size: 512MB 32bit data bus, 200MHz FLASH: SLC NAND Flash: 1GB Multi-IO: 2 x 60 Pin 2.0mm space DIP connector 1 x 30 Pin 2.0mm space DIP connector 1 x 51 Pin 1.0mm space SMD connector Board: 4 x User Leds(Green) 1 x Power Led(Red) Supply Voltage from 2V to 6V Mechanical: Dimension: 64x 50x 11mm Software: Superboot-210 Android 2.3 + Linux-2.6.35 Android 4.0 Linux-2.6.35 + Qtopia-2.2.0/Qt-4.4.3/Qt-4.7 Package List: 1 ×Tiny210 mother board 1 ×Tiny210 core board 1 ×4.3" LCD with touch screen 1 ×DVD 1 ×serial cable 1 ×miniUSB cable 1 ×internet cable 1 ×power Note: This board is not completed open source ! Not recommand!

- Tiny210 is a high-performance Cortex A8 core board, from Guangzhou, a friendly arm design, production and distribution sales. It uses Samsung S5PV210 as the main processor, running at up to 1GHz. Integrated PowerVR SGX540 S5PV210 internal high-performance graphics engine, support for 3D graphics run smoothly, and can be smooth to play 1080P video of the large size.

- Mainly using the tiny210 double-pin 2.0mm pitch, leads to the CPU the most common functional pin, and seeks to Tiny6410 core board three rows of pin-compatible (P1, P2, and the CON2); also features the S5PV210 chips, respectively, leads to the standard miniHDMI interface, and 1.0mm pitch SMD CON1 Block (51Pin), as shown above.

- Tiny210 onboard 512M DDR2 memory, and can smoothly run advanced operating system, Android, Linux and WinCE6. It is ideal for the development of high-end Internet of Things, advertising, multimedia terminal, smart home, high-end surveillance system, video game control panel device.

- Audio input and output: using the WM8960 professional audio chip, containing Class D amplifier on-board microphone, and supports HDMI audio and video synchronization output (exclusive)

NANOPC & NANOPINanoPC & NanoPi. The NanoPC series is a new product line. These boards are Mini boards but in a much smaller size. Its compact size and abundant ports and interfaces make it popular in portable devices development, auto electronic devices, industrial applications, GPS systems and multimedia systems. LCD Options：. 7"LCD with Resistive

Touch Panel.FRIENDLYELEC DOWNLOADS Model Download; NanoPi-NEO3: NanoPi-R2S: SOM-RK3399: NanoPi-NEO4: NanoPi-M4: NanoPi-M4v2: NanoPC-T4: NanoPi-R4S: ZeroPi: NanoPi-Duo: NanoPi-Duo2: NanoPi-M1: NanoPi-M1 NANOPI M4 - FRIENDLYARM 32GB eMMC Module for NanoPi (+$15.95) 16GB eMMC 5.1 Module for NanoPi (+$12.95) 64GB eMMC Module for NanoPi (+$28.95) 2.0 Megapixel Universal USB Camera Module (FA-CAM202) (+$15.97) 13.2MP MIPI Camera Module (+$25.00) 1080P HDR MIPI Camera - MCAM400 (+$12.99) PCIe to USB 3.0 x4 HAT for M4 (+$9.90) 4x SATA HAT for NanoPi M4 (+$25.00) PSU

NANOHAT OLED0.96inch 128x64 OLED. NanoHat OLED is a small and cute monochrome OLED module with low power consumption. It is 0.96". Its resolution is 128 x 64. It communicates with a master device with I2C. The NanoHat OLED module has the same form factor as FriendlyElec"s NanoPi NEO. It can be stacked on a NanoPi NEO. It has three onboard programmable user LCD-S702 - FRIENDLYARM WIKI The S702 LCD is a FriendlyARM developed LCD with capacitive touch panel. Its resolution is 800 x 480. Its backlight is adjustable via FriendlyARM’s one-wire technology.

RK3399-ANDROID7FriendlyELEC"s Android system supports picture taking and video recording with a USB camera, Android"s camera app has these functions. When you use the app to take pictures or record video you need to be aware of the following two things: 1) Make sure your camera"s resolution works. We suggest you try a camera with a lower CIF

resolution first.NANOPI M4 - FRIENDLYARM WIKI The NanoPi M4 is a RK3399 SoC based ARM board. It has the same form of factor as the RPi B3+ and has ports and interfaces compatible with RPi B3+ too. On a 85 x 56 mm compact board there are rich hardware resources. These features make it a good platform for rapid product prototyping and various applications. HOW TO SETUP RTMP SERVER ON NANOPC-T4 1 Introduction. This article gives basic steps on how to use a RK3399 based board under Linux to collect real-time video stream data and push the data to a RTMP server which a user can visit and watch the

NANOPC & NANOPINanoPC & NanoPi. The NanoPC series is a new product line. These boards are Mini boards but in a much smaller size. Its compact size and abundant ports and interfaces make it popular in portable devices development, auto electronic devices, industrial applications, GPS systems and multimedia systems. LCD Options：. 7"LCD with Resistive

Touch Panel.FRIENDLYELEC DOWNLOADS Model Download; NanoPi-NEO3: NanoPi-R2S: SOM-RK3399: NanoPi-NEO4: NanoPi-M4: NanoPi-M4v2: NanoPC-T4: NanoPi-R4S: ZeroPi: NanoPi-Duo: NanoPi-Duo2: NanoPi-M1: NanoPi-M1 NANOPI M4 - FRIENDLYARM 32GB eMMC Module for NanoPi (+$15.95) 16GB eMMC 5.1 Module for NanoPi (+$12.95) 64GB eMMC Module for NanoPi (+$28.95) 2.0 Megapixel Universal USB Camera Module (FA-CAM202) (+$15.97) 13.2MP MIPI Camera Module (+$25.00) 1080P HDR MIPI Camera - MCAM400 (+$12.99) PCIe to USB 3.0 x4 HAT for M4 (+$9.90) 4x SATA HAT for NanoPi M4 (+$25.00) PSU

NANOHAT OLED0.96inch 128x64 OLED. NanoHat OLED is a small and cute monochrome OLED module with low power consumption. It is 0.96". Its resolution is 128 x 64. It communicates with a master device with I2C. The NanoHat OLED module has the same form factor as FriendlyElec"s NanoPi NEO. It can be stacked on a NanoPi NEO. It has three onboard programmable user LCD-S702 - FRIENDLYARM WIKI The S702 LCD is a FriendlyARM developed LCD with capacitive touch panel. Its resolution is 800 x 480. Its backlight is adjustable via FriendlyARM’s one-wire technology.

RK3399-ANDROID7FriendlyELEC"s Android system supports picture taking and video recording with a USB camera, Android"s camera app has these functions. When you use the app to take pictures or record video you need to be aware of the following two things: 1) Make sure your camera"s resolution works. We suggest you try a camera with a lower CIF

resolution first.NANOPI M4 - FRIENDLYARM WIKI The NanoPi M4 is a RK3399 SoC based ARM board. It has the same form of factor as the RPi B3+ and has ports and interfaces compatible with RPi B3+ too. On a 85 x 56 mm compact board there are rich hardware resources. These features make it a good platform for rapid product prototyping and various applications. HOW TO SETUP RTMP SERVER ON NANOPC-T4 1 Introduction. This article gives basic steps on how to use a RK3399 based board under Linux to collect real-time video stream data and push the data to a RTMP server which a user can visit and watch the

FRIENDLYARM WIKI2.1 Embedded Operating Systems. How to Build FriendlyWrt; Buildroot for RK3399; FriendlyDesktop 18.04 for RK3399; FriendlyCore 18.04 for RK3399; FriendlyCore 16.04 for S5P4418; FriendlyCore 16.04 for S5P6818 NANOPI M4 - FRIENDLYARM WIKI The NanoPi M4 is a RK3399 SoC based ARM board. It has the same form of factor as the RPi B3+ and has ports and interfaces compatible with RPi B3+ too. On a 85 x 56 mm compact board there are rich hardware resources. These features make it a good platform for rapid product prototyping and various applications.

NANOPI R1S-H3The NanoPi R1S (as "R1S")is an open source IoT ARM board designed and developed by FriendlyElec for hobbyists, makers and developers. The NanoPi R1S has two Gbps Ethernet ports, an onboard 2.4G Wi-Fi module. FriendlyElec ported OpenWrt for the NanoPi R1S. By applying some simple configurations it will work as a router.

NANOPI NEO2The NanoPi NEO2 is a newly released super tiny ARM board by FriendlyElec. It uses Allwinner’s 64-bit H5 quad-core SoC (ARM Cortex-A53). It has internal hexa-core Mail450 GPU, 512M DDR3 RAM. A UbuntuCore and Armbian image files are ready for it. The NanoPi NEO2 inherits NEO"s form factor and has compatible interfaces and ports

NANOPI NEO4VPU: 4K VP9 and 4K 10bits H265/H264 60fps decoding, Dual VOP, etc. PMU: RK808-D PMIC, cooperated with independent DC/DC, enabling DVFS, sofeware power-down, RTC wake-up, system sleep mode. RAM: 1GB DDR3-1866. Flash: no Onboard eMMC, but NANOPI DUO - FRIENDLYARM WIKI The NanoPi Duo is designed and developed by FriendlyElec for makers, hobbyists and professionals. It is small, just 50 x 25.4 mm. It uses Allwinner’s Cortex-A7 H2+ SoC. It has 256M/512M DDR3 RAM and an onboard WiFi module. A UbuntuCore image is ready for it. On such a small board rich interfaces such as Ethernet, USB, SPI, UART, I2C,

PWM, IRUSE NETWORKMANAGER TO CONFIGURE NETWORK SETTINGS Option 1: you can click on the network icon on the bottom right of the task bar. After you click on it a NetworkManger menu will pop up and all the available networks will be listed. If there is an active wireless network you will see something similar to the following screenshot: You can click on a WiFI AP and connect your board to it. MATRIX - RELAY - FRIENDLYARM WIKI The Matrix-Relay module is a SPDT relay which is an electrically operated switch. Relays are used where it is necessary to control a circuit by a low-power signal. Phone: +86-20-8520 1025       Email: SALES@FRIENDLYARM.COM / techsupport@friendlyarm.com Forum

____ All Category CPU Module Mini Board Cortex-A9(Quad-Core)       Cortex-A8 ARM11       ARM9 NanoPC & NanoPi Hats & Docks Enclosure & Holder       3D Printed       Acrylic Metal       Plastic BakeBit Sensors/Modules Matrix Accessories       Actuator       Camera Communication       Display       GPS Heat Sink       Power       Sensor Serial Comm Board       SSD/MicroSD Others LCD Module Value Pack & Kit

__NANOPI NEO PLUS2 V2.0 CPU Model: Allwinner H5 Number of Cores: 64-bit Quad-Core Frequency: Cortex-A53 1.2GHz x4 Memory RAM: 32-bit 1GB DDR3 Storage eMMC: 8GB

__IOT-2G APPLICATION CARRIER BOARD FOR NANOPI DUO2 GSM/GPRS SIM800C GSM/GPRS module GSM/GPRS 850/900/1800/1900MHz GPRS multi-slot class 12/10 GPRS mobile station class B Connectivity

NANOPI NEO CORE2CPU Model: Allwinner H5 Number of Cores: 64-bit Quad-Core Frequency:4* Cortex-A53 Up to 1.5GHz Memory RAM: 512MB/1GB DDR3 Storage eMMC:

SOM-RK3399V2CPU Model: Rockchip RK3399 Number of Cores: big.LITTLE, 64-bit Dual Core Cortex-A72 + Quad Core Cortex-A53 Frequency: Cortex-A72(up to 2.0GHz), Cortex-A53(up to 1.5GHz) ...

SOM-RK3399CPU SOC: Rockchip RK3399 Number of Cores: big.LITTLE, 64-bit Dual Core Cortex-A72 + Quad Core Cortex-A53 Frequency: Cortex-A72(up to 2.0GHz), Cortex-A53(up to 1.5GHz) GPU ...

__OCTA-CORE 64-BIT ALL-IN-ONE ANDROID SYSTEM WITH 9" LCD AND CAP TOUCH CPU Model: Samsung S5P6818 Number of Cores: Cortex-A53 Octa-Core Frequency: 400MHz-1.4GHz Memory RAM: 1GB DDR3, up to 800MHz Storage

NANOPI NEO CORE2CPU Model: Allwinner H5 Number of Cores: 64-bit Quad-Core Frequency:4* Cortex-A53 Up to 1.5GHz Memory RAM: 512MB/1GB DDR3 Storage eMMC:

TINY210IntroductionThe Tiny210 CPU board is designed and developed by FriendlyElec. It is a Cortex-A8 embedded processing board that uses the Samsung S5PV210 System On Chip (SOC). Its maximum frequency is up to 1GHz. The S5PV21...

SMART210IntroductionThe Smart210 CPU board is designed and developed by FriendlyElec. It is a Cortex-A8 embedded processing board that uses the Samsung S5PV210 System On Chip (SOC). Its maximum frequency is up to 1GHz. The S5PV2...

TINY4412IntroductionThe Tiny4412 CPU board uses Samsung Quad-Core A9 Exynos4412SoC with scaling frequency up to 1.5GHz. It has 1GB DDR3 RAM and 4GB eMMC Flashand is featured as a high performance and low cost development platfor...

MINI210SSpecification:        Dimension: 110 x 110 mm     CPU: 1GHz Samsung S5PV210 with PowerVR SGX540 graphics engineRAM: 512 MB, 32 bit BusFlash: up to 2GB NAND FlashEEPROM: 256 Byte (I2C)Ext. Memory:...

__MINI6410 (1G FLASH) + 4.3"LCD + STANDARD ACCESSORIES Specification:        Dimension: 110 x 110 mmCPU: 533MHz Samsung S3C6410A ARM1176JZF-S with VFP-Unit and Jazelle (max freq. 667 MHz)RAM: 256 MB, 32 bit BusFlash: up to 1GB NAND FlashEEPROM: 256

__MINI2451 (256M FLASH) + 3.5"LCD + STANDARD ACCESSORIES SpecificationDimension: 100 x 100 mmCPU: 400 MHz Samsung S3C2451 ARM926EJ (max freq. 533 MHz)RAM: 128 MB, 16 bit BusFlash: up to 1GB NAND FlashEEPROM: 256 Byte (I2C)Ext. Memory: SD-Card sock...

__MINI2440 (256M FLASH) + 3.5"LCD + STANDARD ACCESSORIES Specification:        Dimension: 100 x 100 mm     CPU: 400MHz Samsung S3C2440 ARM926T (max freq. 533 MHz)RAM: 64 MB, 32 bit BusFlash: up to 1GB NAND FlashEEPROM: 256 Byte (I2C)Ext.

__UNO DOCK V2.0 FOR NANOPI NEO Opitional Accessories @media (min-width: 320px) and (max-width:480px){.Accessories-ul-font {font-size:8px; }.Accessories-ul-font li{min-height:105px;}}@media (min-width: 481px) and (max-width:767px) {.Accesso...

UNO DOCKOpitional Accessories @media (min-width: 320px) and (max-width:480px){.Accessories-ul-font {font-size:8px; }.Accessories-ul-font li{min-height:105px;}}@media (min-width: 481px) and (max-width:767px) {.Accessories-...

POWER DOCKOpitional Accessories @media (min-width: 320px) and (max-width:480px){.Accessories-ul-font {font-size:8px; }.Accessories-ul-font li{min-height:105px;}}@media (min-width: 481px) and (max-width:767px) {.Accessories-...

__USB PORT 1602 LCD MODULE FOR PI (LCD2USB) Application of LCDSmartie under Windows Connect the module to a host PC"s USB and install lcd2usbdriver. The LCD2USB driver can be downloaded at http://www.harbaum.org/till/lc...

__7 INCH CAPACITIVE TOUCH SCREEN LCD 1024X600 (X710) Downloads X710-AT xxx LCD"s datasheet:http://www.mediafire.com/download/j7iys93ii39hnn9/X710-AT070TNA2-V1.pdfX710-WDxxx capacitive touch panel"s datasheet:http://www.mediafir...

SOM-RK3399V2CPU Model: Rockchip RK3399 Number of Cores: big.LITTLE, 64-bit Dual Core Cortex-A72 + Quad Core Cortex-A53 Frequency: Cortex-A72(up to 2.0GHz), Cortex-A53(up to 1.5GHz) ...

__NANOPI NEO PLUS2 V2.0 CPU Model: Allwinner H5 Number of Cores: 64-bit Quad-Core Frequency: Cortex-A53 1.2GHz x4 Memory RAM: 32-bit 1GB DDR3 Storage eMMC: 8GB

MINI210SSpecification:        Dimension: 110 x 110 mm     CPU: 1GHz Samsung S5PV210 with PowerVR SGX540 graphics engineRAM: 512 MB, 32 bit BusFlash: up to 2GB NAND FlashEEPROM: 256 Byte (I2C)Ext. Memory:...

SOM-RK3399CPU SOC: Rockchip RK3399 Number of Cores: big.LITTLE, 64-bit Dual Core Cortex-A72 + Quad Core Cortex-A53 Frequency: Cortex-A72(up to 2.0GHz), Cortex-A53(up to 1.5GHz) GPU ...

__OCTA-CORE 64-BIT ALL-IN-ONE ANDROID SYSTEM WITH 9" LCD AND CAP TOUCH CPU Model: Samsung S5P6818 Number of Cores: Cortex-A53 Octa-Core Frequency: 400MHz-1.4GHz Memory RAM: 1GB DDR3, up to 800MHz Storage

NANOPI NEO CORE2CPU Model: Allwinner H5 Number of Cores: 64-bit Quad-Core Frequency:4* Cortex-A53 Up to 1.5GHz Memory RAM: 512MB/1GB DDR3 Storage eMMC:

__MICROSD TO EMMC ADAPTER Attention: this adapter doesn"t apply to a RK3399 based board. If you need an eMMC module for a RK3399 based board you can check the option for an eMMC module on that product"s page. ...

SOM-RK3399CPU SOC: Rockchip RK3399 Number of Cores: big.LITTLE, 64-bit Dual Core Cortex-A72 + Quad Core Cortex-A53 Frequency: Cortex-A72(up to 2.0GHz), Cortex-A53(up to 1.5GHz) GPU ...

NANOPI M1 PLUSOptional Accessories @media (min-width: 320px) and (max-width:480px){.Accessories-ul-font {font-size:8px; }.Accessories-ul-font li{min-height:105px;}}@media (min-width: 481px) and (max-width:767px) {....

__IOT-2G APPLICATION CARRIER BOARD FOR NANOPI DUO2 GSM/GPRS SIM800C GSM/GPRS module GSM/GPRS 850/900/1800/1900MHz GPRS multi-slot class 12/10 GPRS mobile station class B Connectivity

__7 INCH CAPACITIVE TOUCH SCREEN LCD 1024X600 (X710) Downloads X710-AT xxx LCD"s datasheet:http://www.mediafire.com/download/j7iys93ii39hnn9/X710-AT070TNA2-V1.pdfX710-WDxxx capacitive touch panel"s datasheet:http://www.mediafir...

__MINI6410 (1G FLASH) + 4.3"LCD + STANDARD ACCESSORIES Specification:        Dimension: 110 x 110 mmCPU: 533MHz Samsung S3C6410A ARM1176JZF-S with VFP-Unit and Jazelle (max freq. 667 MHz)RAM: 256 MB, 32 bit BusFlash: up to 1GB NAND FlashEEPROM: 256

ACCESSORIESSpecification:CPU Module V1304Dimension: 74 x 55 mm     CPU: 1GHz Samsung S5PV210 with PowerVR SGX540 graphics engineRAM:1G, 32 bit BusFlash: up to 1GB NAND FlashEthernet: 10/100M

__OCTA-CORE 64-BIT ALL-IN-ONE ANDROID SYSTEM WITH 9" LCD AND CAP TOUCH CPU Model: Samsung S5P6818 Number of Cores: Cortex-A53 Octa-Core Frequency: 400MHz-1.4GHz Memory RAM: 1GB DDR3, up to 800MHz Storage

Tiny210 SDK set (1G Flash) + 7"LCD resistive LCD (S70) + Standard Accessories · Brand: FriendlyElec · Product Code: Tiny210 | S5PV210 ARM Cortex-A8 Board.Phone:+86-20-85201025   Email:[email protected] / [email protected]  WikiMyAccountShoppingCartLoginRegister