car rear view camera tft lcd factory

I tie wrapped mine to my rear view mirror (truck with cap - zero rearward visibility), camera on license plate. I very carefully wrapped the camera in electrical tape in an effort to stave off the moisture some have said they had. I even taped the edges of the lens, that looked to be the likeliest point of entry.

I initially had the camera powered from an always on source but then got wondering about the current draw (10 mA maybe????) and how long it would take to drain the battery if the truck sat for awhile. I then was also thinking about the lifetime of the LED"s themselves.

I had one gotcha with the video cable. With the camera plugged right into the display it was great but when using the long cable there was no device seen. Seeing how some have written about quality of the video cables I ended up cutting the RCA plugs off and soldering the cables together. One of the ends was bent badly and the connector was loose inside the plastic piece, so I just went ahead and did it.

It didn"t work, still no picture. Totally perplexed I changed inputs on the display and there was the image. Yikes! The camera is a female end, when plugging into the display pigtail directly the male end on the display in input #1. However, the long video cable is male-male which means it uses the other connector on the display, the female one. This is input #2. Oh well.

A nice feature of this unit is the mirror image reversing that can be done both up and down and left - right. I have the display upside down and I was able to invert the image and also remove the mirror image effect. A comical point is that the text on the screen is mirror imaged now, it inverts everything, not just the camera image. You would think it would invert the image and then superimposes the text on top of that. Also, the grid lines don"t move as you flip the image. Not a big deal.

Now I wait to see if it lasts. I am going to get a pinhole camera for the second input - put it on the right front corner. I"m terrified of scraping a car as I turn into a parking spot.

Car Rear View Monitors, Cameras & Kits└ Car Video Monitors & Equipment└ Vehicle Electronics & GPS└ Consumer ElectronicsAll CategoriesAntiquesArtBabyBooks & MagazinesBusiness & IndustrialCameras & PhotoCell Phones & AccessoriesClothing, Shoes & AccessoriesCoins & Paper MoneyCollectiblesComputers/Tablets & NetworkingConsumer ElectronicsCraftsDolls & BearsMovies & TVEntertainment MemorabiliaGift Cards & CouponsHealth & BeautyHome & GardenJewelry & WatchesMusicMusical Instruments & GearPet SuppliesPottery & GlassReal EstateSpecialty ServicesSporting GoodsSports Mem, Cards & Fan ShopStampsTickets & ExperiencesToys & HobbiesTravelVideo Games & ConsolesEverything Else

Car Rear View Monitors, Cameras & Kits└ Car Video Monitors & Equipment└ Vehicle Electronics & GPS└ Consumer ElectronicsAll CategoriesAntiquesArtBabyBooks & MagazinesBusiness & IndustrialCameras & PhotoCell Phones & AccessoriesClothing, Shoes & AccessoriesCoins & Paper MoneyCollectiblesComputers/Tablets & NetworkingConsumer ElectronicsCraftsDolls & BearsMovies & TVEntertainment MemorabiliaGift Cards & CouponsHealth & BeautyHome & GardenJewelry & WatchesMusicMusical Instruments & GearPet SuppliesPottery & GlassReal EstateSpecialty ServicesSporting GoodsSports Mem, Cards & Fan ShopStampsTickets & ExperiencesToys & HobbiesTravelVideo Games & ConsolesEverything Else

By continuing to use AliExpress you accept our use of cookies (view more on our Privacy Policy). You can adjust your Cookie Preferences at the bottom of this page.

One CCD COLOR 700TVL Weather/Water-Proof Wide Angle Vehicle Rear View Camera With Wide View Angle, Video, and Night Vision. Approx. 2.8" width x 3.0" height x 2.6" length (size includes surface-mount attachment).

Weather and Waterproof casing with the rain shield. Please note: The casing is weather and waterproof under normal use only and doesn"t require any further adjustment on your part. However, the cables may not be weather and waterproof. To make proofing enabled, the cable connections will require additional sealing/protection that you must provide. Remember, improper installation and using the product in opposition to the manufacturer"s instructions and the manufacturer"s defined terms and conditions of normal usage may result in damage to the weather/waterproofing properties of the camera.

Reverse image - set to display a reversed camera image on the monitor by default(for vehicle rear viewing to duplicate the normal view seen in a rear-view mirror)

Caution: The camera is designed to operate within a range of constantly changing voltage levels produced by a vehicle"s battery and alternator (post engine ignition) under normal use conditions. Some vehicles have a very high momentary voltage at the vehicle starting time and the excessive voltage generation at that time might cause damage to the camera. If your vehicle tends to emit high voltage levels during ignition you will need to install a fuse/voltage regulator/etc. to protect your camera. Please consult with a professional vehicle audio/video equipment installers if needed.

7. Video input: AV1/AV2. Two-way video input, AV1 is connected to VCD/DVD video output signal; AV2 is connected to reversing camera (automatically switch to when reversing);

1. Power on: during driving, the video AV1 (VCD/DVD) playback screen will automatically switch to the AV2 (camera rear view) screen when reversing, and it will automatically switch back to the video AV1 (VCD/DVD) playback screen after the reversing is completed. , Make driving entertainment and reversing safety compatible;

2.When the machine is turned off: When the parking space is reversing, it will automatically turn on and detect the AV2 (camera rear view) signal and display the AV2 rear view picture. After the reversing is completed, it will automatically shut down, making the product more power-saving.