tft lcd capacitive touchscreen wide temperature price

ER-TFT043A2-3 is 480x272 dots 4.3" color tft lcd module display with driver IC ST7282 and optional capacitive touch panel with controller and connector,optional 4-wire resistive touch panel with connector,superior display quality,wide view angle and easily controlled by MCU such as 8051, PIC, AVR, ARDUINO,ARM and Raspberry PI .

It can be used in any embedded systems,car,mp4,gps,industrial device,security and hand-held equipment which requires display in high quality and colorful image.It supports rgb interface. FPC with zif connector is easily to assemble or remove.Of course, we wouldn"t just leave you with a datasheet and a "good luck!".Here is the link for 4.3"TFT Touch Shield with Libraries, Examples.Schematic Diagram for Arduino Due,Mega 2560,Uno and 8051 Microcontroller Development Board&Kit.

Spice up your Arduino project with a beautiful large touchscreen display shield with built in microSD card connection. This TFT display is big (5" diagonal) bright (18 white-LED backlight) and colorful 800x480 pixels with individual pixel control. As a bonus, this display has a capacitive touch panel attached on screen by default.

Maclight 5 inch tft lcd display modules have 800x480, 480x272, 640x480 typical resolutions. TN TFT and IPS display modes are available. the interface can be RGB, MCU, LVDS, HDMI, mipi interfaces.

The 5 inch IPS TFT is free viewing angle tft and wide temperature tft, that its working temperature can be up to -30~80°C, one IC driver solution with cost competitive,40-pin RGB interface available,

This 12.3" full HD IPS Bar TFT LCD/ Letterbox Displaymodule features LVDS interface, an exceptional clarity in a unique aspect ratio of 21:9. It provides outstanding high contrast imagethat can be easily viewed over a wide angleeven in bright sunlight and unfavourable conditions. Its wide operating temperature range and long lifetimemake it ideal forindustrial, automotive, transportation, retail signage systems and marine applications. Also suitable for outdoor applications.

Products are widely used in general communications, household appliances, industrial control, medical equipment, POS machines,instruments, meters, GPS navigation, digital photo frames, netbooks, financial electronics, communication electronics, consumer electronics, information appliances, culture, education, sports and entertainment, etc. field. Such as attendance machine,fingerprint device, access control machine, stock machine, walkie-talkie, video doorbell, learning machine, point reading machine,GPS navigator, and so on .

The capacitive touchscreen is commonly a business option for customers in need of special information. HR capacitive touch buttons are available in different sizes, settings, and interfaces.

If your customers consider buying capacitive touchscreen, it is important to know what type of screen they are looking for. If capacitive touchscreen is one of the most popular products, it is important to know that some customers are buying capacitive touch screens in different designs and sizes. capacitive touchscreen is one of the most popular products as it is a built-in touchscreen, capacitive touchscreen is a popular choice among customers.

capacitive touch screen printing technologies are more affordable, and it"s a great choice for smaller and larger printing options. However, glass is a widely used material in capacitive touch and printing technologies, as they are more energy-efficient, and easy to use.

The capacitive touchscreen makes it easier to display objects in built-in and that a touchor is more lightweight than the capacitive touchscreen. This type of touchscreen makes it easier to display different screens in addition to the consumer"s needs.

ChengHao Display model CH430WV15A-CT is a color active matrix thin film transistor (TFT) liquid crystal display (LCD) that uses amorphous silicon TFT as a switching device. This model is composed of a TFT LCD panel, a driving IC, a high brightness back-light, a capacitive touch panel and FPC.

If your applications require a wider viewing angle, Winstar O Film TFT technology will be what you need. There are many wider view angle technology for TFT displays in the market such as MVA (Multi-domain Vertical Alignment) and IPS (In-Plane Switching). Comparing to the MVA or IPS technology, O Film TFT has the advantage of pricing.

Most industrial application of TFT-LCD glasses that are available in the market are TN-LCD type. However, TN technology suffers from phenomenon called gray scale inversion. This means the display have one viewing side in which color of the image change suddenly after exceeding specified view angle. Therefore, the normal TFT models we offer which the viewing angle are limited. Currently, we offer a solution to enhance TN glass viewing angle and can overcome gray scale inversion. This is our TFT O-Film solution.

The modle of WF43VTZAEDNGA is a standard 4.3 inch O Film TFT LCD Capacitive Touchscreen Display which with a wide view angle solution. Winstar offers a wider view angle solution for our TFT product line. We add an O Film on top of the TFT TN-LCD glass to enhance the viewing angle. This will be a cost effectiveness solution in the industrial application for color TFT displays to enhance the view angle.

RFF70AB2-AIH-DNG is a 7-inch TFT LCD display with capacitive touch screen. Built-in HX8264-E and HX8664-B driver ICs support 24 bit RGB interface, and also, the module has built-in DC to DC function. The contrast ratio of the module is 800:1 (typical value), the brightness is 700 nits (typical value), and the aspect ratio is 16:9. RFF70AB2 series and RFF700Y series are compatible. If you’ve already used our RFF700Y series, you can give this new RFF70AB2 series a try.

If your applications require a wider viewing angle, Winstar O Film TFT technology will be what you need. There are many wider view angle technology for TFT displays in the market such as MVA (Multi-domain Vertical Alignment) and IPS (In-Plane Switching). Comparing to the MVA or IPS technology, O Film TFT has the advantage of pricing.

Most industrial application of TFT-LCD glasses that are available in the market are TN-LCD type. However, TN technology suffers from phenomenon called gray scale inversion. This means the display have one viewing side in which color of the image change suddenly after exceeding specified view angle. Therefore, the normal TFT models we offer which the viewing angle are limited. Currently, we offer a solution to enhance TN glass viewing angle and can overcome gray scale inversion. This is our TFT O-Film solution.

The modle of WF43VTZAEDNGA is a standard 4.3 inch O Film TFT LCD Capacitive Touchscreen Display which with a wide view angle solution. Winstar offers a wider view angle solution for our TFT product line. We add an O Film on top of the TFT TN-LCD glass to enhance the viewing angle. This will be a cost effectiveness solution in the industrial application for color TFT displays to enhance the view angle.

With 480x320 color pixels, this 3.5” LCD display module adopts ILI9488 driver chip and integrates GT911 touch chip that supports 5 capacitive touch-points at most. This display supports for SPI (4-wire) communication mode and performs excellently in the angle of view (60/60/60/60). In addition, the module provides compatibility with GDI (work with main-controllers with GDI), plug and play. Furthermore, it features high resolution, wide viewing angle, and simple wiring, which can be used in all sorts of display applications, such as, IoT controlling device, game console, desktop event notifier, touch interface, etc.

The 3.5” LCD module can be powered at 3.3~5V and is compatible with multiple main-controllers: UNO, Leonardo, ESP32, ESP8266, FireBeetle M0. Use the GDI interface to work with M0, which could effectively reduce wiring steps. Besides, there is an onboard MicroSD card slot for displaying more pictures.

The liquid crystal display (LCD) technology has been used in several electronic products over the years. There are more reasons for LCDs to be more endearing than CRTs.

The Capacitive touch panel is activated with anything containing an inductive load such as a finger or stylus. It allows for multi-touch options. When using the capacitive touch screen, the display needs a separate controller to interface with the touch panel. The display for capacitive touch is brighter since the touch panel is transparent.

The Transmissive polarizer is best used for displays that run with the backlight on all the time. This polarizer provides the brightest backlight possible. If you have a need for a bright backlight with lower power drain, transmissive is a good choice for this TFT LCD display.

Focus LCDs can provide many accessories to go with your display. If you would like to source a connector, cable, test jig or other accessory preassembled to your LCD (or just included in the package), our team will make sure you get the items you need.Get in touch with a team member today to accessorize your display!

Focus Display Solutions (aka: Focus LCDs) offers the original purchaser who has purchased a product from the FocusLCDs.com a limited warranty that the product (including accessories in the product"s package) will be free from defects in material or workmanship.

ASI-T-17711A1SPN/D is a 1.77 inch transflective TFT with a resolution of 160 x 128, SPI interface and with a brightness of 110 Nits; viewable in direct sunlight.

ASI-T-240DA10SMN/AQ is a 2.4 inch high brightness TFT with a resolution of 240 x 320, SPI & MCU interface, IPS all-angle view and with a brightness of 1000 Nits; viewable in direct sunlight. It also features an extra wide operating temperatures of -30 to +80C; perfect for extreme environmental applications.

ASI-T-350EA8RCY6/A is a 3.5 inch high brightness TFT with a resolution of 320 x 240, 24-bit Parallel RGB/Serial RGB/CCIR/YUV interface and with a brightness of 850 Nits; viewable in direct sunlight with Capacitive Touch Panel

ASI-T-350EA10SRN/A is a 3.5 inch TFT with a resolution of 320 x 240, SPI & RGB interface and with a high brightness of 1,000 Nits and wide temperature range of -30 - +85 C.

ASI-T-430FA2F6/AY is a 4.3 inch IPS TFT with a resolution of 480 x 272, RGB interface, a brightness of 220 nits, wide operating temperature and a capacitive touch panel.

ASI-T-430MA10FN/A is a 4.3 inch TFT with a resolution of 800 x 480, IPS all view, RGB interface, a brightness of 1000 Nits with an ultra wide temperature operating and storage range.

ASI-T-430MA8F6/A is a 4.3 inch TFT with a resolution of 800 x 480, IPS all view, RGB interface, a brightness of 850 Nits, capacitive touch panel with an ultra wide temperature operating and storage range.

ASI-T-700MAKFN/A is an industrial grade, high reliability, 7 inch TFT with a resolution of 800 x 480, 24-bit RGB interface, wide temperature range, IPS all view and with a high brightness of 1000 Nits; viewable in direct sunlight.

ASI-T-800JA5LN/D is a 8 inch wide high brightness TFT, with a wide operating temperature and a resolution of 1024 x 600, LVDS interface and a brightness of 500 Nits.

ASI-T-9201948A5LN/D is a 9.2 inch wide TFT, with a wide operating temperature and a resolution of 1920 x 480, LVDS - Bar Type interface and a brightness of 500 Nits; viewable in direct sunlight.

ASI-T-10251248AKLN/D is a 10.25 inch wide TFT, with a resolution of 1280 x 480, LVDS interface, IPS all view, with wide temperature operation and storage and a high brightness of 1,000 Nits.

ASI-T-1040GA6TN/D is a 10.4 inch wide TFT, with a wide operating temperature and a resolution of 640 x 480, All View display, RGB interface and a brightness of 500 Nits.

ASI-T-1040HB4LN/D is a 10.4 inch wide TFT, with a wide operating temperature and a resolution of 800 x 600, LVDS interface and a brightness of 400 Nits.

ASI-T-1210HB4LN/D is a 12.1 inch wide TFT, with a wide operating temperature, a resolution of 800 x 600, all view display, LVDS interface and a brightness of 450 Nits.