pstrotator tft display pricelist

PstRotator supports separate antenna rotator controllers for Azimuth and Elevation control.It can controltwo separate rotor interfaces: one for azimuth and the second for elevation, or it can control a single azimuth + elevation rotor interface.

The program checks all the time the link status, and if it happens from any external reason to disconnect, the software will try to reconnect the client to server. The link status is displayed to both client and server.MAPS

PstRotator and PstRotatorAz are Shareware - you can try them for free, once you register them, you will receive a code to disable the reminder messages that will otherwise appear at start. In order to let you try the software, the programs are full functional for 10 minutes, and then stop, and the QTH locator is changed to KN34BJ.

Please download and try PstRotator or PstRotatorAz before you purchase a registration for them, as I want you to be sure you like PstRotator or PstRotatorAz before you pay for them!

You have to install thePstRotatorAzprogram in both remote and base station locations, or you can use a Serial Server (Ethernet to serial adapter) like the one manufactured byLantronix,Moxa(or others) in the remote site.

PstRotatorcan work not only as an interface for all the very known satellites tracker programs, but it can work also as a standalone satellites tracker.

Enter yourCallsign / User Name, and click theBuy Nowbutton to pay25 EURvia PayPal the license fee. The same license works for bothPstRotatorandPstRotatorAzprograms!

Enter yourCallsign / User Name, and click theBuy Nowbutton to pay25 EURvia PayPal the license fee. The same license works for bothPstRotatorandPstRotatorAzprograms!

I"ve set up my paid programs - PstRotatorAZ, TRX-Manager and gPredict. The antenna rotator using the USB-UIRT and tv rotator connects and correctly rotates. The rotation info is correctly displayed by PSTRotatorAZ.

Tested my sAl-30 Controller it is communicating with The local PC on com 3 But when I close the ShackLan control software and launch the PstRotatorAz software even though Az Com is selected to Com3 an

Tested my sAl-30 Controller it is communicating with The local PC on com 3 But when I close the ShackLan control software and launch the PstRotatorAz software even though Az Com is selected to Com3 an

I have been interfacing between SatPC32 and PstRotator, to control a Green Heron controller for AZ and an ERC for elevation. This works great and it also work with the "original" SatPC32ISS. After the

I have been interfacing between SatPC32 and PstRotator, to control a Green Heron controller for AZ and an ERC for elevation. This works great and it also work with the "original" SatPC32ISS. After the

Hi Codrut, I"m using PstRotator AZ to control a SteppIR Yagi and its rotator. Most of the time I prefer to set antenna azimuth manually but I want PstRotatorAz to give my SteppIR controller the curren

Hi Codrut, I"m using PstRotator AZ to control a SteppIR Yagi and its rotator. Most of the time I prefer to set antenna azimuth manually but I want PstRotatorAz to give my SteppIR controller the curren

Is there a way to configure PstRotator + OmniRig to use split mode rather than satellite mode with the FT-847? By default the radio is entering satellite mode on the FT-847 when omni-rig is engaged ev

Is there a way to configure PstRotator + OmniRig to use split mode rather than satellite mode with the FT-847? By default the radio is entering satellite mode on the FT-847 when omni-rig is engaged ev

Hi, note that Greencube now has an Oscar number, IO-117. The kepler element is updated, so if you have set up favorites in PstRotator with the name Greencube you need to manually edit the Satellites[x

Hi, note that Greencube now has an Oscar number, IO-117. The kepler element is updated, so if you have set up favorites in PstRotator with the name Greencube you need to manually edit the Satellites[x

Hello, in the past I used PstRotator in combination with a Winrotor interface by Funkbox. Now I got a ARCO controller by Microham and tried to install the new downloaded driver called "ARCO.inf". When

Hello, in the past I used PstRotator in combination with a Winrotor interface by Funkbox. Now I got a ARCO controller by Microham and tried to install the new downloaded driver called "ARCO.inf". When

Good evening, I noticed that the passes of Greencube (satellite in MEO orbit) are not displayed correctly in the NEXT PASS list. Sometimes some passes are not displayed, but from other programs they a

Good evening, I noticed that the passes of Greencube (satellite in MEO orbit) are not displayed correctly in the NEXT PASS list. Sometimes some passes are not displayed, but from other programs they a