4.3 tft lcd monitor manual in stock

About my brand new Color TFT 4.3" (Measured diagonally) monitor, I received it Monday evening, at a little after 5 pm. I had been told to expect it between the 14th, and, the 16th, so the early arrival time was great. Thanx. The LCD monitor arrived in perfect (visibly) condition. Again, thanx. The first thing that I did was to disconnect my 7" LCD mirror mount video (yellow), and, power (red and, black), wires, hooked up to my cigar lighter plug-in cabling. I then, plugged the power cord, from the cigar lighter, into the power harness, from the 4.3" LCD monitor, and, then, plugged in the yellow (video) plug, from my backup camera, cable array, located behind my license plate-mounted, camera. As soon as I tried the new LCD monitor, it did not work??? My 7" mirror-mount LCD, had been working perfect, from day one, "until," I disconnected the power cord, from it, to the cigar lighter, power cord, so that I could hook up the new, 4.3" monitor. Now, neither monitor works; the almost 3 week old mirror-mounted LCD monitor, that had been working perfectly, or, the newly-arrived, 4.3" LCD monitor, that I had bought, to replace the mirror mount, because it was just a little too large, for my dash, where I had had it mounted. So, tomorrow morning, I will attack the problem, with my multitester (meter), and, somewhat-limited knowledge, of troubleshooting these type systems, and, see if I can figure out, where the problem lies. I know! Why didn"t I leave well enough alone, when I had the mirror-mount LCD monitor working beautifully? I guess, because, I"m a perfectionist, and, I really didn"t want that "very large," mirror-mount monitor, taking up so much space, on the dash of my pickup truck. Size-wise, the new 4.3" LCD monitor is perfect, for the dash of my pickup truck. I only have to figure out now, why "both monitors," do not work now??? I may have blown a fuse, in the truck"s fuse box? That is where I plan to begin my troubleshooting, tomorrow morning (checking backup light power, and, related fuses, etc.! Wish me luck. I will get back with everyone, here, as soon as I figure out, what I did wrong, and, what I had to do, to fix the problem. Talk to ya"ll later..... p.s. I rated this new monitor, only 1 star, primarily, because, it isn"t working, however, I believe, it"s not working, because of something I did wrong, while splicing the new 4.3" power cord, into the cigar lighter, adapter power plug. Once I fix this power problem, (which I believe, that I will solve), then, I will change my rating, of the 4.3" monitor, to at least 4 stars, and, more than likely, 5 stars. "Toodle-ooh," for now, folks..... (The trials, and, tribulations, of a "shade-tree," automotive electronics technician/electrician???) (Smile!)

LATE NOTE: I got up early, Tuesday morning, (today), and, checked my cigar lighter adapter plug-in wiring, and, the first two adapters were messed up, but, the third power adapter, worked, as they say, "like a charm," and, when I finished hooking up the new 4.3" Color TFT LCD monitor to it, and, plugging it into the cigar lighter hole, all I needed to do was turn the ignition key, to the ACC2, position, shift into reverse, and, the monitor "came alive," with a"super nice," image of the bushes, behind my pickup truck, and, the sidewalk, between, the bushes in front of our home, a couple of feet, closer, to the back, of my truck"s rear bumper. The only thing that did not work with this new monitor, is the small, remote control, that came with my 3-week old, 7" mirror mounted LCD, that I have retired, for the time being. I velcroed the base of this new, LCD monitor, to the top, center, of my dash, and, even though, it is very tight, and, stable, I still plan to drill a couple of small holes, thru the base of the holder, and, screw it down, with a screw on each side of the monitor holder"s pedestal base, to ensure that it remains where I mounted it. By the way, I changed my rating, of this brand new, 4.3" monitor to 5 stars, from my original rating of 1 star, and, I am now, one very happy, completely satisfied camper..... p.s. This new monitor has, brightness, contrast, color, and, two screen size, adjustments, (wide screen, and, narrow screen), but, no tint, adjustment, which, for the price that I paid, for this monitor, is "fine, and, dandy," with me. Once again, I want to thank ya"ll. I am now, a happy camper, once more, with a monitor, that, although smaller, than the 7" once that I bought originally, is still large, and, clear enough, and, gets the job done, in fine fashion, and, it doesn"t block, nearly as much, of the windshield, like the 7" monitor did, that was mounted, in the same dash location, as this 4.3" Color TFT Monitor is mounted now.....

LATER YET, REMINDER: Remember to check your cigar lighter"s plug-in power adapter, to ensure that it"s working properly, or, the monitor will not function properly.

LCD monitor for camera helps in preventing accidents while driving in reverse by avoiding children, traffic, pedestrians, toys and pets while backing out of the driveway or parking space.

The WVSXS70 single-camera system includes a 7-inch wireless LCD monitor, wireless rear camera, 12-volt accessory plug, suction cup monitor mount, non-corrosive camera mounting bracket, and stainless steel hardware.

WiSight® 2.0 technology digitally locks the camera to the monitor and blocks all outside signals.  This eliminates interference and noise typical of analog wireless systems and delivers a sharp, vivid picture of the vehicle’s surroundings to the monitor.

General: Datavideo TLM-404 is 4x4” TFT LCD monitors, 2U height designed for a standard EIA 19" rack. NTSC/PAL video format auto recognition with video loop through, 75-ohm self-terminated video output connector. The "AUX" input provides options for external format converters such as SDI and DV input converter.