line down lcd screen manufacturer

Vertical lines appearing on LCD screen is very common. Whether the screen belongs to a laptop computer or desktop PC, mobile phone, or even a television, the fault is usually due to the ribbon cable and its connections.

A faulty ribbon cable can cause all sorts of havoc manifesting in bright vertical lines. Sometimes they can be coloured lines such as blue, green, grey, black, and red. The lines can appear thick or thin and on just one-half of the screen. Sometimes the fault will manifest as two vertical white lines. You can even get horizontal lines as well.

If you have lines appearing on the LCD screen, then the first simple thing to check is the seating of the ribbon cable that connects the display panel to the motherboard. Most of the time, the fault is with the poor connection made by the ribbon cable.

One of the most common problems with ribbon cables is oxidation of the contacts. It can happen either on the ribbon cable contacts or on the socket contacts. Manufacturers often use a mix of gold and copper for the electrical contacts, however, if they have not used enough gold, then oxidation occurs over time. This results in a working television or laptop screen suddenly exhibiting lines.

One of the most common faults with laptops is that the ribbon cable connecting to the LCD panel cracks. It typically fails near the hinge area due to flexing in that region, and over time, some of the tracks on the plastic cable breaks. I have seen these types of faults on many laptops. It does not matter whether it is a Lenovo, IBM, Acer, Samsung, Toshiba, or even a MacBook Pro!

This type of fault can also occur on LCD televisions; however, it tends to be on new units, where the box has received an impact during transit from the factory.

I used this same method of troubleshooting to repair an LCD television recently. Modern televisions have a video out socket, and if you feed the signal from that to another monitor, you can check for the quality of the video display. If the external monitor does not show lines, then you know for sure that it is a connection issue. Hence, this method of troubleshooting works for some of the modern televisions as well.

When half of the vertical interlace is missing showing a picture that is broken up vertically, the display appears with vertical lines. This is usually due to a cracked ribbon cable.

Generally, for laptops a replacement cable is always required due to it breaking near the hinge. I had this Dell laptop and replacing the LCD ribbon cable solved the problem. I managed to buy a replacement from Dell for a modest price £6.00. The laptop was just outside the warranty period; however, they still shipped out the cable free of charge. This is the reason why people buy Dell. In my experience Dell tend to stand by their customers and products, and their prices for replacement parts are realistic and down to earth.

LCD display screens on notebooks, monitors and TVs alike are made up of two thin layers of glass containing liquid crystal material between them. When the glass becomes damaged, debris infiltrates the crystal layer or another issue occurs with the display function, this causes vertical lines of color to appear when the monitor is fully illuminated. These lines are either permanent due to internal failure or temporary due to faulty display connections.

Diagonal, jagged and both horizontal and vertical lines typically indicate panel damage. A single set of horizontal lines could indicate damage, a graphics system failure, or loose internal video cables. Broken signals from cables or graphics hardware creates impurities in reproducing an image on an LCD screen, conditions that often manifest in the form of vertical or horizontal lines of color.

If the lines are infrequent in their appearance, or are not permanently visible, a loose video cable is often the problem. As devices are carried, dropped and bumped, cables become loose even in laptops. Laptops are built with casing to absorb and dissipate small shocks, but even some bumps can cause cables to become loose. Even televisions and monitors, while often stationary, can still have loose cables if not properly seated.

If you"ve ever opened your laptop to clean underneath the keyboard, you might see numerous things like food particles, hair or even dust. On the rear of monitors and televisions, they also contain a series of holes or slits that dust can creep into the inner workings and cause problems. Regularly cleaning out a laptop"s keyboard and dusting off the rear of a monitor or television can greatly extend its useful life. This is a preventative measure and rarely works in removing any existing lines on a screen.

The first step in troubleshooting is determining the extent of the damage. For external monitors or televisions, re-seat any video input cables or consider replacing the cables with new ones. Should the lines continue to display, this indicates an internal failure, something few consumers are able to fix on their own. Instructions exist online for individual products to disassemble a monitor, laptop or television to replace broken parts, but the most suggested course of action is shipping it to the manufacturer for a warranty repair. If no warranty is active for the device, consumers are then advised to replace the device entirely with a new one, as this is usually the cheapest solution. Lines on an LCD panel indicate the LCD screen or screen ribbon cable need to be replaced, parts that can cost several hundred dollars.

Ryan Goodrich has been writing technology and technical articles for a vareity of online and service-based companies since 2008. He"s written content for websites like TopTenREVIEWS and TechNewsDaily, in addition to many other website. He holds a Bachelor of Science in English and a master"s degree in communication and works as a technical writer.

Back in April last year, Lionel blogged about a vertical line issue that could potentially affect customers who own 17" Inspiron 9200, 9300, and XPS Gen 2 notebook LCDs.

After engaging our engineering and product group teams, as well as the LCD manufacturer, to investigate and isolate the cause of this issue, we narrowed the problem down to a specific part within a certain date range. During that research, we found that the part may also affect the Inspiron 6000, 8600, Latitude D800, D810, and Precision Mobile Workstation M60 and M70 LCDs. That led to Lionel"s second blog post on the topic.

We"ve taken steps to contact those who may be affected to offer a warranty replacement and also put in place measures to rectify any out of pocket expense incurred by out of warranty customers who replaced the affected screens in the past.

That said, there are other variables that can lead to vertical and horizontal lines on other system types regardless of size or model. Lines on an LCD can appear sporadically, at random places on the screen, and for what appears to be for no reason at all. These lines can be caused by normal LCD failures brought on by a multitude of variables, which I"ll try to cover here. Vertical lines tend to be a more common issue in notebooks, primarily because they are subjected to more wear and tear on a daily basis than a desktop LCD.

The most common cause of these lines is simply a loose connection. As notebook systems are carried around, no matter how careful we try to be, they have a tendency to be bumped, jarred, and even sometimes the heart stopping drop. Though today"s notebooks are designed to better absorb and dissipate small shocks, it can still have adverse affects on the notebook"s internal components. A good bump or series of bumps and random movements can cause the LCD cable to become loose. The connection remains intact, but some breaks in the signal can lead to impurities in the reproduction of the image on the screen. Think of a loosely-fastened garden hose… water will still be directed and outputted through the end of the hose, but some water is lost at the connection. This is easily fixed by tightening the hose. Similarly, the LCD can usually be fixed by simply making sure the connection is secure. (Service manuals for Dell systems can be found here on support.dell.com.)

If these simple fixes don"t seem to work, then we need to look at the actual failure possibilities. Vertical or horizontal lines that don"t disappear after the basic troubleshooting are usually caused by circumstantial failures. The most common type of failure that leads to lines on the display is an open circuit connection between the driver IC (flexible circuit board) and LCD glass. This is usually caused by external stresses (mechanical, thermal, etc…), which causes the flex circuit to detach from the glass. The variables leading to the detachment are wide and are dependant on individual cases. With the amount of travel and various operating environments of a notebook, pinpointing the exact cause can be near impossible, unless of course the problem immediately follows a catastrophic event such as dropping the notebook or prolonged exposure to heat or cold, such as leaving the system in a car.

Investigations into technical problems, including which systems, batches, and date ranges are affected, are rigorous, and we strive for accuracy. Unfortunately, not every technical problem can be traced down to the root cause. But in every case, we try to proceed appropriately and in all fairness to affected customers.

If you are experiencing any problem with lines on your LCD and your system is not one of the potentially affected units, or in the date range outlined in Lionel"s earlier posts, please contact technical support to troubleshoot and identify possible fixes. See below for details on how to do that.

So, why there are green lines on a monitor? Well, several factors might be at play if the displays attached to your PC aren’t operating correctly. It’s conceivable that your adapter or cable connection is the problem. Change the cable if it doesn’t work. If nudging doesn’t work, try another.

Throughout this post, we’ll explain why green lines occur on your display and the best techniques to remedy them. The extra information will be invaluable in fixing all of your monitor’s green lining concerns. It’s time to delve in!

There are a variety of possible causes for horizontal green lines or vertical lines on your computer screen, from outdated video card drivers to damaged ribbon cables and improper video cable connections. To determine whether the problem is software or hardware, you may examine the BIOS settings.

When you see a green line on your computer screen, you should inspect your display for any faults, including all the connectors. There might be a problem with the cable causing the monitor’s color to lose signal.

It would help if you examined the possibility that your computer has been infected with a virus or other malicious software. While this isn’t one of the most prevalent reasons for a green vertical line on the display, it’s still possible.

Faulty graphics drivers might also cause problems with your monitor’s connection to the computer. However, although this is the most common symptom, it may also be seen in the form of green lines on a monitor.

Because Windows 10 does not contain the BIOS, any horizontal or vertical striations on your display problem result from a software problem. If you don’t see any horizontal or vertical lines on your Windows 10 computer screen, this is likely a hardware problem.

It’s possible that your computer’s drivers don’t cause the flickering green lines on your display if they occur immediately after the computer has started up and not on the initial screen while the machine is starting up.

You may also try downloading the drivers from the hardware manufacturer’s website if it doesn’t work. Make sure you’re looking at “Display adapters” (in this case, “NVIDIA GeForce 9800 GTX/9800 GTX+”) and the graphics card’s name.

This is the standard procedure to remove the green lines on the monitor, regardless of whether your motherboard is set to UEFI or a classic BIOS configuration:

The prior driver version must be installed in this case. Using the drop-down option, choose the previous graphics driver version in Download Center to download and install it.

Monitoring a computer’s refresh rate can help identify and correct problems with graphics performance. The monitor’s refresh rate refers to how often the screen updates its image. A slow refresh rate can cause visual artifacts, such as green lines, on the screen.

Collectively, these lines indicate that the monitor is not keeping up with the latest graphics rendering instructions. This can lead to an overall degraded experience when using the computer.

The prior driver version must be installed in this case. Using the drop-down option, choose the previous graphics driver version in Download Center to download and install it.

Knowing your screen resolution, even if you aren’t an engineer or a photographer. You can appreciate your multimedia activities better if you know what you have and what you can do. In Windows 10, you may verify your screen’s native resolution by following these steps:

The resolution may be changed by selecting a different option from the drop-down menu. You should only view content that is compatible with your computer’s capabilities.

Be sure to switch off your display when not in use. A screen saver program and turning off the display when it’s not in use will significantly prolong the monitor’s life.

The green line of death seems to be caused by a hardware problem based on the current symptoms. If you go back in time, you may discover similar problems on non-Apple devices. This problem only appeared on OLED-display phones, to be more exact.

There may be more to the problem with water damage than just a replacement screen, but it’s typically just a matter of getting a new LCD or OLED display.

Due to obsolete GPU drivers, the green lines on a Windows 10 laptop are standard. Using specialist driver update tools, you may repair this problem. One of the most prevalent reasons for this issue is a malfunctioning laptop display.

Your phone’s LCD might be damaged if you don’t mend a cracked screen right away. Damage to the LCD screen might occur if dust penetrates the screen cracks. Your phone’s LCD screen might be damaged if you drop it in water or other liquid.

That’s all about the green lines on the monitor from us. An external display with bothersome vertical lines or horizontal lines may be fixed by testing the image to determine what causes these lines on the computer monitor.

It doesn’t matter whether the computer, cable box, or any other input source is to blame; the monitor, its LCD screen, or internal hardware is to blame.

Watching your mobile screen with those white or black vertical/horizontal lines is annoying. In short, it’s tough to use a phone with these lines appearing on the screen. Typically, this issue is associated with the LCD, caused by a faulty hardware component in your device due to some accidental fall or water damage. Phones with such damages can only be fixed at a phone repair center.

If you are itel, TECNO or Infinix phone user and is troubled with vertical and horizontal line issues, make a reservation now without waiting time at the service shop. Carlcare Service will fix your phones easily. If your phone is under warranty, Carlcare can also save you repair costs. Check warranty now>>

Before you head on to the fixes, let’s make your phone data safe. Sometimes, these lines are irreversible, and even the solutions you’re up to try may be followed by some sort of data loss. Therefore, the first thing you should do is make a backup of important files and apps on your device. Some popular ways for data back in Android devices are via:

If there’re white lines on the screen, this solution may prove effective. A battery cycle is when you charge a mobile to 100% and let it drain to 0% again. Usually, the lines will disappear soon as you charge the battery fully.

If the above methods don’t work, it’s time to try this masterstroke. Using your phone in a safe mode will confirm if the lines are because of some faulty app or software.

Check if the lines are gone! If yes (hopefully), then a third-party app is the culprit. Now uninstall the latest downloaded applications until the issue is gone. OR you should try the Solution:4

Suppose the lines are still visible. Then the issue is most likely due to some hardware failure- and the best option for you is to take your device to a reliable repair center.

It won’t be aggregation if you call “Factory Reset” the mother of all solutions. It fixes most of the issues caused by an app or software glitch. The process actually brings your phone back to the factory setting by erasing all the apps and files you’ve downloaded post your phone purchase.

If the horizontal or vertical lines still appear on your phone screen after trying all the above methods, you better take your device to a reliable mobile repair store near you. Most likely, it’s a faulty hardware component that needs to be repaired or replaced. Here, we would suggest you opt for only an authorized service center, as this will ensure flawless repair at a reasonable cost. Besides, if any of the components have to be replaced, they will be genuine and as per your specific requirements.

As the official service center part, we provide 100% original spare parts and various value-added services for Infinix, Itel, and TECNO users. Now with the online reservation service through Carlcare App, you don’t need to wait while your phone is repaired at our service centers.

Power down the computer and unplug all peripherals. If you are using a laptop, take its battery out by flipping it upside down and sliding the battery release latch. Press and hold the power button for 15 or 20 seconds to clear all residual power from the system. Some of the computer’s power might have been transmitting to the monitor, causing it to short out. Reconnect everything and turn the system back on to see if the lines are gone.

Unplug the monitor from the back of the computer and wait a few seconds until it displays a message “No signal.” If the no signal message also has vertical lines, you know the problem is in the monitor and not in your computer. Press the “Menu” button on the screen and then use the other buttons to browse for a “Factory Settings” mode. Select this mode to reset the monitor to its original settings. If the lines persist, the monitor may have been dropped or exposed to a magnet -- which can’t be fixed.

Reconnect and turn the computer back on. Look for the lines at boot up: if you see lines before Windows loads, the problem is either with the video card, the video connection cable -- whether HDMI or VGA -- or the monitor itself. If the lines only appear in Windows, the problem is a Windows setting -- most likely the refresh rate. Right-click on the Desktop once Windows loads and choose “Screen Resolution.” Click “Advanced Settings,” “Monitor,” and then lower the refresh rate to see if the lines disappear.

Flat-panel displays are thin panels of glass or plastic used for electronically displaying text, images, or video. Liquid crystal displays (LCD), OLED (organic light emitting diode) and microLED displays are not quite the same; since LCD uses a liquid crystal that reacts to an electric current blocking light or allowing it to pass through the panel, whereas OLED/microLED displays consist of electroluminescent organic/inorganic materials that generate light when a current is passed through the material. LCD, OLED and microLED displays are driven using LTPS, IGZO, LTPO, and A-Si TFT transistor technologies as their backplane using ITO to supply current to the transistors and in turn to the liquid crystal or electroluminescent material. Segment and passive OLED and LCD displays do not use a backplane but use indium tin oxide (ITO), a transparent conductive material, to pass current to the electroluminescent material or liquid crystal. In LCDs, there is an even layer of liquid crystal throughout the panel whereas an OLED display has the electroluminescent material only where it is meant to light up. OLEDs, LCDs and microLEDs can be made flexible and transparent, but LCDs require a backlight because they cannot emit light on their own like OLEDs and microLEDs.

Liquid-crystal display (or LCD) is a thin, flat panel used for electronically displaying information such as text, images, and moving pictures. They are usually made of glass but they can also be made out of plastic. Some manufacturers make transparent LCD panels and special sequential color segment LCDs that have higher than usual refresh rates and an RGB backlight. The backlight is synchronized with the display so that the colors will show up as needed. The list of LCD manufacturers:

Organic light emitting diode (or OLED displays) is a thin, flat panel made of glass or plastic used for electronically displaying information such as text, images, and moving pictures. OLED panels can also take the shape of a light panel, where red, green and blue light emitting materials are stacked to create a white light panel. OLED displays can also be made transparent and/or flexible and these transparent panels are available on the market and are widely used in smartphones with under-display optical fingerprint sensors. LCD and OLED displays are available in different shapes, the most prominent of which is a circular display, which is used in smartwatches. The list of OLED display manufacturers:

MicroLED displays is an emerging flat-panel display technology consisting of arrays of microscopic LEDs forming the individual pixel elements. Like OLED, microLED offers infinite contrast ratio, but unlike OLED, microLED is immune to screen burn-in, and consumes less power while having higher light output, as it uses LEDs instead of organic electroluminescent materials, The list of MicroLED display manufacturers:

LCDs are made in a glass substrate. For OLED, the substrate can also be plastic. The size of the substrates are specified in generations, with each generation using a larger substrate. For example, a 4th generation substrate is larger in size than a 3rd generation substrate. A larger substrate allows for more panels to be cut from a single substrate, or for larger panels to be made, akin to increasing wafer sizes in the semiconductor industry.

2015, sold to giantplus and tce photomasks, gen 3 still operated by giantplus, gen 4 line sold to giantplus, equipment sold and line demolished, remainder operated by tce

"Samsung Display has halted local Gen-8 LCD lines: sources". THE ELEC, Korea Electronics Industry Media. August 16, 2019. Archived from the original on April 3, 2020. Retrieved December 18, 2019.

"TCL to Build World"s Largest Gen 11 LCD Panel Factory". www.businesswire.com. May 19, 2016. Archived from the original on April 2, 2018. Retrieved April 1, 2018.

"Panel Manufacturers Start to Operate Their New 8th Generation LCD Lines". 대한민국 IT포털의 중심! 이티뉴스. June 19, 2017. Archived from the original on June 30, 2019. Retrieved June 30, 2019.

"Samsung Display Considering Halting Some LCD Production Lines". 비즈니스코리아 - BusinessKorea. August 16, 2019. Archived from the original on April 5, 2020. Retrieved December 19, 2019.

Herald, The Korea (July 6, 2016). "Samsung Display accelerates transition from LCD to OLED". www.koreaherald.com. Archived from the original on April 1, 2018. Retrieved April 1, 2018.

"China"s BOE to have world"s largest TFT-LCD+AMOLED capacity in 2019". ihsmarkit.com. 2017-03-22. Archived from the original on 2019-08-16. Retrieved 2019-08-17.

This website is using a security service to protect itself from online attacks. The action you just performed triggered the security solution. There are several actions that could trigger this block including submitting a certain word or phrase, a SQL command or malformed data.

Weird lines appearing all over the monitor display is nothing new. You might see plenty of them, or just one. They can be horizontal or vertical. Sometimes there are so much of them that you can barely see anything on the display. Other times it’s just one or two.

If you see vertical red lines on your monitor screen, usually there is no reason to panic. Most of the time it is due to some benign software issue that you can easily fix. Even if it’s a hardware issue, a trip to the computer repair technician should be enough.

Vertical red lines usually indicate an issue with your driver or other software. The best way to make sure it’s not a hardware issue is to enter BIOS settings. Since BIOS is not a part of your operating system it is also not a part of your computer software.

On the screen, you’ll see which key you have to press to enter the BIOS, you usually have to press F10, Del, or F2. This key may differ depending on the computer’s manufacturer. If you can’t find it on the screen, search for it on the internet.

If the red lines aren’t there anymore, the problem is in your software. However, if the lines are still there, it’s a hardware problem. That means that something is wrong with your monitor.

If the problem is related to the software, most of the time the driver is causing it. This usually happens if your computer and graphics card aren’t connected well enough. Also, it may mean that the driver is outdated or it can’t handle the screen resolutions.

The best way to move forward is to update your video drivers. To do this, you should:Right-click the Start button on the bottom, left-corner of the screen and then click Device Manager.

If the red lines remain, you should first try to remove the driver completely. To do this:Follow steps 1-3 from the previous guide, but select Uninstall Device instead of Update Drivers.

Note that this means you won’t have your video card drivers anymore. You’re going to need to download them again. That’s why it is good to write the name of your video card model.

If you have a desktop computer and a monitor, then a monitor or a loose or faulty HDMI cable could be causing the problem. The best way to check if your monitor or HDMI cable is to blame is to connect your computer to another working monitor and see if the red lines appear on it as well.

If they do, then the problem may be in the connecting cable or your graphics card. However, if the lines disappear, then you should replace the monitor.

You can also try to replace the ribbon cable. One goes to the port of your screen, and the other to the port in the motherboard. Usually, a malfunctioning or loose ribbon cable can mess up the monitor display.

For example, it could signal that the power supply is either failing or faulty. In other cases, it could mean you have not connected the HDMI cable well, or there is a poor connection between the processing board and the panel. But another cause could be the picture does not fit the screen exactly.

When you see black vertical lines on your TV screen, the first step is to identify the primary cause of the problem. Start by testing the picture, check your cable connections, and verify that your external devices are working well.

You can also try changing channels to determine whether the lines appear on all channels. Understand that lines on a TV screen can either be a hardware or software issue.

Ideally, aspect ratio, screen resolution, and horizontal or vertical scan frequencies are settings that affect picture display on most TVs. In this case, refer to the external device’s user manual to adjust the picture format settings.

Your TV software runs the device. An outdated software program can cause many problems like vertical lines, poor picture quality, or failure to install apps.

In some cases, a TV fails to process a combination of image settings you have provided. That can cause many picture errors, including flickering lines on TV. While you can go through all the settings one by one, consider resetting your device.

Sometimes vertical lines on an LCD display could mean a damaged T-Con board. The T-Con or timing control card controls the timing of pixels displayed on the screen. If your T-Con board is faulty, the only solution is to repair or replace it.

If you see Samsung TV vertical black lines on the screen, check whether the lines are permanent or moving. If they are moving, your input source is incorrect. Disconnect and reconnect the video cable or HDMI to check if it resolves the issue.

Thirdly, you may come across a problem with your Samsung Smart TV whereby colored lines appear on the edge of your TV screen. The lines may be black, white, or green along the top, bottom, or side of the screen.

The issue occurs when you have set the picture size of your TV to JustScan or Screen Fit. Samsung calls the lines an Overscan line. If your setting is JustScan, the picture resolution of specific programs will not fill the screen, thus causing the lines.

You can resolve the issue by setting the picture size on your Samsung TV to 16:9. The setting will extend the picture beyond the edges and eliminate the Overscan line.

You can fix a TV screen with lines in different ways. For example, you can change channels to see if the lines appear on all changes, change the input source, check cable connections, or power-cycle your device.

This website is using a security service to protect itself from online attacks. The action you just performed triggered the security solution. There are several actions that could trigger this block including submitting a certain word or phrase, a SQL command or malformed data.

This website is using a security service to protect itself from online attacks. The action you just performed triggered the security solution. There are several actions that could trigger this block including submitting a certain word or phrase, a SQL command or malformed data.