raspberry 5 inch 800x480 hdmi lcd touch screen made in china

Compatible and Direct-connect with any revision of Raspberry Pi. (If you are using a Raspberry Pi Zero / Zero 2 W, an additional HDMI cable is required).

Raspberry Pi leads out 40 GPIO pins, while the screen leads out 26 pins. When connecting, pay attention to the corresponding pins and Raspberry Pi pins.

5) Insert the TF card into the Raspberry Pi, power on the Raspberry Pi, and wait for more than 10 seconds to display normally. But the touch is abnormal at that time, and the touch needs to be calibrated as the following steps.

3. After reboot, touch will work normally under normal circumstances. But for different resistance screens, the accuracy of using the default calibration parameters may not be very suitable.

You can perform touch calibration by clicking the Raspberry Pi icon on the taskbar, selecting Preferences -> Calibrate Touchscreen, and following the displayed prompts.

4. After calibration, the following data will be displayed. If you want to save these touch values, you can replace the data in the red circle with the data in the corresponding position in 99-calibration.conf.

Since the ads7846.dtbo provided by Raspberry Pi by default has no de-jitter parameters, you can increase the de-jitter parameters by modifying and replacing ads7846.dtbo

The installation of xserver-xorg-input-evdev and xinput-calibrator in Ubuntu system reports an error, so the touch cannot be used normally. How to solve it?

The installation of xserver-xorg-input-evdev and xinput-calibrator in Kali system reports an error, so the touch cannot be used normally. How to solve it?

Winstar launched a 5" for HDMI signal Interface Mini Computer Display which item No. is WF50BTIFGDHTV. This 5 inch TFT Display with Resistive Touch Panel is a mini panel-mountable display, made of resolution WVGA 800x480 dots. This WF50BTIFGDHTV comes with a control board with a HDMI signal interface and a 40-pin connector on board; it is designed to make Raspberry Pi usage become easily. This display has a USB interface Resistive Touch screen overlay on TFT panel. The Capacitive Touch Panel also is available for option. We designed a connector part no. WWHDMI-00# for optional, the customers can use it to connect WF50BTIFGDHTV module with your Raspberry Pi directly. If the customers do not require a 40-pin header connector on board, please choose WF50BTIFGDHT0.

This display is small and compact, you can simply to use it to work with Raspberry Pi, and also you can use this Mini Computer display with any embedded system which has a HDMI signal output. The 5" display is 800x480 resolution, which is just enough to run most software, but still small enough that it can be used in portable or embedded projects without the bulk. Please note, this product does not include an HDMI or USB cable.

WF50BTIFGDHTV#: with a 40-pin header connector on board, supports up to Raspberry Pi 3B+ (contain Pi 4B) version. If customers choose Raspberry Pi 4 version, please note the interface is Micro HDMI; customers need to use the Micro HDMI to HDMI cable for these TFT series products.

The resolution of the LCD display is 800 x 480, you can configure the resolution via software, and the maximum resolution it supports is 1920 x 1080. It is a USB capacitive touch screen and does not require a driver. It supports five touch control, besides that, the LCD screen comes with an OSD menu adjustment function. You can adjust the contrast, brightness, and switch button. There are 9 interfaces on the back of the screen, one earphone for audio output; two touches (USB connector), for power supply and touch output; one display, an HDMI interface, for connecting the motherboard and LCD display. One power, it can control the backlight to turn on and turn off to save power. One return, it’s only useful in the OSD menu. One right/down, backlight shortcut key. One left/up, backlight shortcut key. A menu, it’s useful in the OSD setting menu, open the OSD/ select key.

*When working with Raspberry Pi 4, for the system image of Raspberry Pi after 2021-10-30, for example on Bullseye, please modify "dtoverlay = vc4-kms-v3d" to "dtoverlay = vc4-fkms-v3d" in the config file, otherwise it may fail to start. But on Buster, please comment out "dtoverlay = vc4-fkms-V3D" by adding #.

This HDMI raspberry pi display is with 800 x 480 resolution, we design a protective case for it, and it need you to assemble it, You could look for the below QA to download the tutorial or contact us by email to get.

When the 5 inch monitor work with RPI, it don"t need external power supply. This screen power supplied and can be touched by GPIO, display by HDMI. If it is powered by external power, there will be no touch function, and please use 5V2A power supply to power it.

Winstar launched a 5" for HDMI signal Interface Mini Computer Display which item No. is WF50BTIFGDHTV. This 5 inch TFT Display with Resistive Touch Panel is a mini panel-mountable display, made of resolution WVGA 800x480 dots. This WF50BTIFGDHTV comes with a control board with a HDMI signal interface and a 40-pin connector on board; it is designed to make Raspberry Pi usage become easily. This display has a USB interface Resistive Touch screen overlay on TFT panel. The Capacitive Touch Panel also is available for option. We designed a connector part no. WWHDMI-00# for optional, the customers can use it to connect WF50BTIFGDHTV module with your Raspberry Pi directly. If the customers do not require a 40-pin header connector on board, please choose WF50BTIFGDHT0.

This display is small and compact, you can simply to use it to work with Raspberry Pi, and also you can use this Mini Computer display with any embedded system which has a HDMI signal output. The 5" display is 800x480 resolution, which is just enough to run most software, but still small enough that it can be used in portable or embedded projects without the bulk. Please note, this product does not include an HDMI or USB cable.

WF50BTIFGDHTV#: with a 40-pin header connector on board, supports up to Raspberry Pi 3B+ (contain Pi 4B) version. If customers choose Raspberry Pi 4 version, please note the interface is Micro HDMI; customers need to use the Micro HDMI to HDMI cable for these TFT series products.

4. First-class Pre and After Service: we ensure the well processing of the practice of our capacitive tft lcd hmi monitor for customers. But for a complicated one, or a full set of project file including capacitive tft lcd hmi monitor and PLC, some fee should be charged. 2. Do your capacitive tft lcd hmi monitor support all brand PLC9 The capacitive tft lcd hmi monitor upport alsmost all foreign and Chinese PLC.

This 5 inch portable touchscreen monitor is designed for maximum flexibility and portability with various applications such as mini PC, laptop and game console. It has HDMI display port for video and micro USB port for touch & power supply. Featuring 800*480 resolution, 126g in weight, removable prop stand and a high quality built-in speaker, this 5" small screen is your perfect choice for DIY projects and on-the-go use.

*When working with Raspberry Pi 4, for the system image of Raspberry Pi after 2021-10-30, for example onBullseye, please modify "dtoverlay = vc4-kms-v3d" to "dtoverlay = vc4-fkms-v3d" in the config file, otherwise it may fail to start. But onBuster, please comment out "dtoverlay = vc4-fkms-V3D" by adding #.

Build-in high-quality loudspeaker, offers crisp audio output when watching movies and playing games. Press the buttons on the back of the screen, backlight & volume could be adjusted according to you needs.

Compatible with Windows PC, Raspberry Pi 4/3/2, Switch, PS4, Xbox One and other devices which has HDMI interface. Supports multiple OS like Raspbian, Ubuntu, Kali, Windows etc.

The Raspberry Pi could be mounted on the back of the screen easily. Screws are included in the package. To keep the CPU cool, a cooling fan Kit + heatsink cooler are provided.

Generally it works with most devices with standard HDMI interface, but please note that the touch function is just for windows and raspberry pi systems.

SpecificationModel: RC050SSize: 5 InchResolution: 800x480Touch: 5 points Capacitive TouchscreenInterface: HDMI & USBSpeaker: SupportPanel Dimension: 4.7x3x0.5 inchPackage size: 5.5x 5.3x2 inchPanel Weight: 126gProduct Weight: 162gPackage Weight: 222gPackage List:1 x 5 inch Monitor2 x HDMI Connector2 x USB Connector4 x Screw1 x Small Fan2 x Long cooper pillars2 x Short cooper pillars1 x User manual