lcd module 20x4 datasheet supplier

A wide variety of 20x4 lcd display datasheet options are available to you, You can also choose from original manufacturer, odm 20x4 lcd display datasheet,As well as from cob, character 20x4 lcd display datasheet.

Adding to what N1VG posted, you can indeed control this module, or any other HD47780-based character LCD module for that matter, with six lines. If you"re using an Arduino as the brains for your project, the LiquidCrystal library that comes with the Arduino IDE will run a HD47780-based module from six pins without having to manage things like passing nybbles to the module - you can just include LiquidCrystal.h, declare a new object (e.g., LiquidCrystal lcd(2,3,4,5,6,7); to use pins 2-7 to control the module), and just shoot data to it with the print() and write() commands. The library will handle the rest.

Not sure if this is normal. My LCD, using the liquidcrystal library, wraps to the third line after finishing the first (then it goes to the second, then the fourth), but addressing each line is normal when using setCursor().

Does anyone know where I can get a pre-manufactured ribbon cable assembly suitable for use with this LCD? Soldering a thru-hole connector or pin header to the panel is something that can probably be done in our shop, but assembling our own cables from scratch may be a bit beyond our ability to do routinely... We just need a 6" cable with (say) female sockets (16x1) at both ends... The other end to plug into a suitable header on an Arduino-based PCB... Thanks for any tips, -Mike

I made a tutorial (in portuguese) about how to use, create custom characters and design menus for the LCD display. Take a look: http://engenheirando.com/arduino/displaylcd/

Can anyone confirm if this works with an Arduino Uno? Following these directions (http://arduino.cc/en/Tutorial/LiquidCrystal), no matter what I do I can only see solid blocks on two of the 4 rows when the pot is turned all the way down. Is this because the Arduino library is for a 16x2 character LCD and this one is a 20x4?

I forgot to buy breakaway male header pins for this LCD module. However, I do have spare female headers from a previous project. Would I be able to use the female headers?

This display has a parallel interface, so it will require about 6 I/O pins to run. The parallel protocol is complex, but there are good LCD libraries out there which make it easy to use. The difference between this and a serial display is that the serial display will only require one I/O pin.

If you use straight headers, the clips used to anchor the lcd to the board get in the way when you try to plug it into a breadboard with power rails on the side.

A very useful LCD - and, if you need it to take even less than 6 pins, there"s a library (by Chris Parish) for using it with a 74HC595 shift register that reduces it to 3 digital output pins. The library and Chris"s tutorial is here - http :// cjparish.blogspot.com/2010/01/controlling-lcd-display-with-shift.html

@Twiddler: Yes, it"s possible to write too fast. Check the write cycle timings in the datasheet. The enable signal can"t be cycled faster than 2MHz. Also after each command sent to the LCD, you have to wait until the busy flag is clear, or delay several microseconds to milliseconds (depending on which command).

The Displaytech 204G series is a lineup of 20x4 character LCD modules. These modules have a 98x60 mm outer dimension with 77x25.2 mm viewing area on the display. The 204G 20x4 LCD displays are available in STN or FSTN LCD modes with or without an LED backlight. The backlight color options include yellow green, white, blue, pure green, or amber color. Get a free quote direct from Displaytech for a 20x4 character LCD display from the 204G series.

This is a 20x4 Arduino compatible LCD display module with high speed I2C interface. It is able to display 20x4 characters on two lines, whitecharacterson blue background.

Generally, LCD display will run out of Arduino pin resource. It needs 6 digital pins and 2 power pin for a LCD display. If you want to build a robot project, it will be a problem with Arduino UNO and LCD display.

This I2C 20x4 LCD display module is designed for Arduino microcontroller. It is using I2C communication interface, With this I2C interface, only 2 lines (I2C) are required to display the information on any Arduino based projects. It will save at least 4 digital / analog pins on Arduino. All connector are standard XH2.54 (Breadboard type). You can connect it with jumper wire directly.

This 1602 LCD module has 8 I2C address in all, from 0x20 to 0x27. You can set one according to your requirements, avoiding the confliction of I2C address. And its contrast can be adjusted manually.

This module is an Arduino compatible LCD display module with high speed I²C interface. It can display 20×4 characters (white characters on a blue background).

The Displaytech 204G series is a lineup of 20x4 character LCD modules. These modules have a 98x60 mm outer dimension with 77x25.2 mm viewing area on the display. The 204G 20x4 LCD displays are available in STN or FSTN LCD modes with or without an LED backlight. The backlight color options include yellow green, white, blue, pure green, or amber color. Get a free quote direct from Displaytech for a 20x4 character LCD display from the 204G series.

The 204A is one of our 20 character x 4 row chip on board (COB) alphanumeric displays. These classic LCD modules are available in a multitude of LCD and LED backlight color combinations to achieve the perfect look for your product. Some of our most popular combinations are STN yellow-green LCD with yellow-green LED backlight, STN blue LCD with white LED backlight, and STN grey LCD with either blue, amber or pure green LED backlight.

Text: .Vi I, RS 5. RAV 6, E U1 aZ U2 U3 ^ 16 5 SrS si-sea 200 LCD 20X4 LED BACKLIGHT 3,55 2,95 0 , TEMPERATURE RANGE CHARACTER PATTERNS OPERATING VOLTAGE LCD DRIVING VOLTAGE LCD DRIVE METHOD LCD DRIVE IC 8 , selectable. THE PART NUMBER IN MASS PRODUCTION 1.GRAY OR Y-G STN,TRANSFLECTIVE LCD ;Y-G BACKLIGHT;6 O"CLOCK OR 12 O"CLOCK; 2.FSTN,TRANSFLECTIVE LCD ;WHITE OR BLUE BACKLIGHT;6 O"CLOCK OR 12 O"CLOCK; 3.Y-G STN,TRANSMISSIVE POSITIVE LCD ;Y-G BACKLIGHT;6 O"CLOCK OR 12 O"CLOCK; 4.BLUE STN,TRANSMISSIVE NEGATIVE LCD ;WHITE

Text: . DB7 COM 16 U3 SEG121-200 80 SEG200 LCD 20X4 16 COM16+ BL+ - BL- LED BACKLIGHT , voltage for logic Vdd- Vss 2.7 5.5 V Supply voltage for LCD drive Vdd- Vo 3.0 13 , Vo LCD contrast adjust 4 RS Register select 5 R/W Read / write 6 E

Text: U1 7. DB0 U3 80 SEG200 LCD 20X4 COM 16 16 COM16+ BL+ - BL- AZ DISPLAYS, INC , AZ DISPLAYS, INC. COMPLETE LCD SOLUTIONS SPECIFICATIONS FOR LIQUID CRYSTAL DISPLAY PART NUMBER: DATE: ACM2004G SERIES November 21, 2002 ACM2004G SERIES LCD MODULE 1.0 MECHANICAL SPECS , - Vss 2.7 - 5.5 V Supply voltage for LCD drive Vdd- Vo 3.0 4.6 6.5 V AZ DISPLAYS, INC. 11/21/02 1 ACM2004G SERIES LCD MODULE 3.0 ELECTRICAL CHARACTERISTICS Item

Text: ~ U3 U2 4. RS 5. R/W 6. E 80 SEG200 LCD 20X4 16 COM16+ BL+ - BL , PART NUMBER: ACM 2004D SERIES DATE: August 9, 1999 ACM2004D SERIES LCD MODULE 1.0 , - Vss 2.7 - 5.5 V Supply voltage for LCD drive Vdd- Vo 3.0 4.6 6.5 V DISPLAYTRONIC A DIVISION OF ZE XIAMEN 01/24/06 1 ACM2004D SERIES LCD MODULE 3.0 ELECTRICAL , ACM2004D SERIES LCD MODULE 4.1 OPTICAL CHARACTERISTICS (Ta=25ºC, Vdd= 5.0V±0.25V, STN LC fluid) Item

Text: U3 SEG121-200 80 SEG200 LCD 20X4 16 COM16+ BL+ - BL- AZ DISPLAYS, INC. LED , AZ DISPLAYS, INC. COMPLETE LCD SOLUTIONS SPECIFICATIONS FOR LIQUID CRYSTAL DISPLAY PART NUMBER: DATE: ACM 2004F SERIES October 2, 2001 ACM2004F SERIES LCD MODULE 1.0 MECHANICAL SPECS , 2.7 5.5 V Vdd- Vo - 6.8 V Supply voltage for logic Supply voltage for LCD drive AZ DISPLAYS, INC. 10/02/01 - 1 ACM2004F SERIES LCD MODULE 3.0 ELECTRICAL

Text: SEG200 LCD 20X4 16 COM16+ BL+ - BL- LED BACKLIGHT DISPLAYTRONIC XIAMEN ZETTLER , logic Vdd- Vss 2.7 - 5.5 V Supply voltage for LCD drive Vdd- Vo - 4.5 6.5 , Pin No. Symbol Function 1 Vss Ground 2 Vdd +5V 3 Vo LCD contrast

Abstract: 20x4 line lcd LCD 20x4 20x4 lcd line address KS0066 20X4 LCD ks0066 Display LCD 20x4 acm2004d lcd controller 20X4 LCD instruction table 20x4 lcd line address 20X4 LCD

Text: U3 SEG121-200 80 SEG200 LCD 20X4 16 COM16+ BL+ - BL- AZ DISPLAYS, INC. LED , AZ DISPLAYS, INC. COMPLETE LCD SOLUTIONS SPECIFICATIONS FOR LIQUID CRYSTAL DISPLAY PART NUMBER: DATE: ACM 2004D SERIES August 9, 1999 ACM2004D SERIES LCD MODULE 1.0 MECHANICAL SPECS , - Vss 2.7 - 5.5 V Supply voltage for LCD drive Vdd- Vo 3.0 4.6 6.5 V AZ DISPLAYS, INC. 09/17/99 1 ACM2004D SERIES LCD MODULE 3.0 ELECTRICAL CHARACTERISTICS Item

Text: COM 16 SEG121-200 80 SEG200 LCD 20X4 16 COM16+ BL+ - BL- DISPLAYTRONIC LED , voltage for logic Vdd- Vss 2.7 - 5.5 V Supply voltage for LCD drive Vdd- Vo - , LCD contrast adjust 4 RS Register select 5 R/W Read / write 6 E Enable 7

Text: 4. RS 5. R/W 6. E 80 SEG200 LCD 20X4 16 COM16+ BL+ - BL- DISPLAYTRONIC LED , Supply voltage for LCD drive Vdd- Vo - 4.5 - V 3.0 ELECTRICAL CHARACTERISTICS Item , LCD contrast adjust 4 RS Register select 5 R/W Read / write 6 E Enable 7

Text: COM 16 SEG121-200 80 SEG200 LCD 20X4 16 COM16+ BL+ - BL- DISPLAYTRONIC LED , voltage for logic Vdd- Vss 2.7 - 5.5 V Supply voltage for LCD drive Vdd- Vo 3.0 , LCD contrast adjust 4 RS Register select 5 R/W Read / write 6 E Enable 7

Text: ändringar utan föregående meddelande ELFA artikelnr 75-512-78 LCD 20x4 TN LED SPECIFICATIONS , /L H/L H/L H/L DESCRIPTION GROUND POWER SUPPLY FOR LOGIC POWER SUPPLY FOR LCD REGISTER , =25 oC, Vss=0V) PARAMETER POWER SUPPLY FOR LOGIC POWER SUPPLY FOR LCD DRIVER INPUT VOLTAGE OPERATING , POWER SUPPLY CURRENT RECOMMENDED LCD DRIVING VOLTAGE FRAME FREQUNCY SYMBOL CONDITION MIN , current .View angles .Contrast . LCD operate voltage 8-3-2. Visual while not operating Module

Abstract: keypad 4x4 c code for 8051 IC 74c922 keypad 4x4 matrix c code for 8051 74C922 74C922 PCF8574 at24C04 code example assembly interfacing 24c04 with 8051 with lcd datasheet keypad 4x4 74c922 lcd interface with at89c2051

Text: .1 uF 1K +5 1 2.7K LCD 20X4 1N914 32 KHz +5 +5 4 3 2 1 9 10 , -wire peripheral set also provides the functions of a user I/O interface panel. This includes 20 x 4 LCD , 4 x 4 , PCF8574 I2C port expanders along with some additional support ICs. The LCD interfaces use one of the , bidirectionally, this would offer little advantage here and would unnecessarily complicate the code. The LCD , The LCD "s read/write line (RW) is hardwired to ground to permanently enable the write function

Text: A3 A4 A5 A6 A7 A8 CHARACTER LCD 20x4 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 , (processor, 8 Mb x 16 Asynchronous Flash Memory, 16 Mb x 16 SDRAM), application board (USB, SDIO, LCD , (processor, 8 Mb x 16 Asynchronous Flash Memory, 16 Mb x 16 SDRAM), application board (USB, SDIO, LCD , 4 x 20 Character LCD display Interface for optional graphic LCD Six Push buttons Secure Digital , !32 application board. LCD Display Buzzer R39 Display Backlight Adjust Ethernet 5V DC Jack

Abstract: Display LCD 20x4 explanation of 16x2 LCD 20X4 LCD 20X4 pin architecture of lcd display 16x2 explanation of 20x4 LCD lcd 20x4 16X4 LCD CHARACTER CODE LCD ASCII CODE 16x2

Text: Crystalfontz Technology * PRELIMINARY * 20x4 and 16x2 intelligent serial interface display , Directly to the LCD Controller Show Information Screen Explanation of Control Functions Cursor Home , " followed by one byte for the column (0-19 for a 20x4 display, or 0-15 for a 16x2 display), and a second , position is 15,1 for a 16x2, and 19,3 for a 20x4 . Here is an example for moving the cursor to column 11 of , are the character X coordinates of the graph area. Each must be beween \000 and \019 for the 20x4 or

Abstract: Display LCD 20x4 display module lcd 4x20 radio shack baud WR232Y02 20X4 standard values of Lcd 16x2 to microcontroller pin architecture of lcd display 16x2 16x2 display display lcd 16x2 232

Text: SPI_CLK SPI_BUSY Crystalfontz Display Function Ground (backlight and controller) Controller and LCD , supply to Vdd. Power A and Power B will only power the LCD itself, not the backlight. DAo not connect a supply greater than 5.25 volts to Vdd or LED+. Damage to your LCD module will result. To use the , Closed CTS is open RTS is fed back on CTS through 1K resistor Crystalfontz Technology 20x4 and , Prefix Large Block Number (3x4 or 4x4) not used Send Data Directly to the LCD Controller Show

Abstract: Display LCD 20x4 LCD ASCII CODE 20x4 pin diagram of serial lcd display 16x2 LCD 16X2 5V RS232 Driver LCD ASCII table CODE 16x2 explanation of 16x2 LCD lcd display 2x16 software command 16X2 LCD CHARACTER CODE display lcd 16x2 232

Text: the LCD "s solder connector (J2). The supply"s ground should connect to the VSS terminal of the LCD , and LCD power (+5volt only) LED Backlight power (+5volt only) SPI or RS-232 data in (input) SPI , systems, you need only use the LCD "s solder connector (J2). This connector has standard 0.1 inch spacing , will only power the LCD itself, not the backlight. Do not connect a supply greater than 5.25 volts to VDD or LED+. Damage to your LCD module will result. To use the backlight, connect a regulated 5v

Abstract: Display LCD 20x4 pin diagram of serial lcd display 16x2 16x2 serial lcd 20X4 LCD display display 16x2 datasheet 20x4 characters Display Driver explanation of 20x4 LCD led scrolling display lcd display 2x16 software command

Text: the LCD "s solder connector (J2). The supply"s ground should connect to the VSS terminal of the LCD , and LCD power (+5volt only) LED Backlight power (+5volt only) SPI or RS-232 data in (input) SPI , systems, you need only use the LCD "s solder connector (J2). This connector has standard 0.1 inch spacing , will only power the LCD itself, not the backlight. Do not connect a supply greater than 5.25 volts to VDD or LED+. Damage to your LCD module will result. To use the backlight, connect a regulated 5v

Text: Optrex Numbering System DOT MATRIX Type LCD Modules DMC ­ 50000 N Y H U ­ S E B 1 Standard Pin Connections Pin No. Symbol Pin No. OPTREX CORPORATION HIGH CONTRAST LCD MODULE FEATURES , 7 1 Symbol 14 DB7 1. Type of Display: 2. Development Number: 3. LCD TYPE: 4 , 20x4 40x4 N/A 5x8 dots PRD250LPW-ND 5x7 dots PRD250LPW-ND 5x8 dots N/A 5x7 CURS PRD250LPW-ND, 16x4 20x2 20x4 24x2 PRD250LPW-ND N/A PRD360LPW-ND N/A PRD360LPW1-ND - - - - - -

Text: LSI LS5015 Simple LCD micro-controller Features : * * * * * 6 Input pad, 4 output pad Direct drive buzzer output. 512x11 bit ROM 20x4 bit of RAM. 4 digit plus 2 dot LCD * * * * 10x3 LCD segment 32768 Crystal/RC oscillator mask option Single 1.5V operation. Low cost and low price. General Description The LS5015 is a simple micro-controller for LCD application. It has an internal ROM size of 512x11bit. A 20x4 bit of RAM. 4 digit plus 2 dot LCD format on 10x3 lcd segment

Text: RAiO RA0086A 80 CH Segment/Common Driver For Dot Matrix LCD Specification Simplify Version , For DOT Matrix LCD 1. Introduction The RA0086A is an 80 channels LCD driver LSI which is , operation (in common mode) Power down function (in segment mode) Applicable LCD duty: 1/64 – 1/256 , 80CH Common / Segment Driver For DOT Matrix LCD 4. Signal Description 4-1 Block Description Name , Controls the output voltage level according to the input control pin (M COM / SEG and DISPOFFB). 20x4

Abstract: 20x2 display vfd 2X20 serial ascii lcd 20x2 vfd 2X20 screen 20X4 LCD DISPLAY 20X4 20 PINS display lcd 4x20 display lcd 4x20 usb display VFD 4x20

Text: Advanced Connections *Note: The 4x20 LCD screen shown, the DevDevil is also available with a 2x20 sized , bytes for 20x2 screen, 80 bytes for 20x4 18 2.6.Set Auto Line Dec Wrap On Hex ASCII 254 67 , one line when wrapping once a row becomes full. 20X4 screens will write to rows 1, 3, 2, then 4 while , screen or 1 and 4 for 20x4 screen 2.9.Go Home Dec Hex ASCII 254 72 FE 48 H Returns the , between 1 and 2 for 20x2 screen or 1 and 4 for 20x4 screen Digit 1 byte, single decimal digit to

Text: MTC-20400X GENERAL SPECIFICATION Item INTERFACE PIN ASSIGNMENT Content Pin No. Pin Out Number of Character Module Size 98.5(W)x60.0(H)x10.5/14.5(D)mm Max Viewing Area Function Description 20x4 76.0(W)x25.2(H)mm 1 V DD Logic Circuit Power Supply VO Power Supply for LCD Panel 4 RS Data/Instruction Register Select - 5 R/W - 6 E 7~14 , Supply for Logic Input Voltage LCM Recommend LCD Module Driving Voltage Power Supply Current

Abstract: stepping motor EPSON EM stepping motor EPSON em 400 stepping motor EPSON em series stepping motor EPSON asm of lcd display 16x4 S1C88000 LCD module 20X4 3.3v 14005 QFP13-64

Text: - - - 80 LCD Driver (segXcom) Package (Form of delivery) 20X4 4 32.768k , 5.5V 0.3µA/Sleep 1.5µA/HALT LCD driver Constant voltage regulator CPU Peripheral , speed / high performance 32kHz to 4MHz 0.9V to 6.4V 0.45µA/HALT LCD driver Constant voltage regulator RF converter General purpose 32kHz to 2MHz 0.9V to 5.5V 0.6µA/HALT LCD , *1 32.768k/low speed Flash 128ch 285mW(50MHz) *3 S1C33L00 series Incorporation of a LCD

Text: 4 40 16 0.55 20 40 LCD PANEL 20X4 CHARACTERS 16 40 40 4 DRIVER , 76.0X25.2 mm LCD Supply Voltage Character Font 5 x 7 + cursor Character Size 2.95X4.75 , Power Supply : +5V 3 V0 Power Supply for LCD 4 5 RS Register Select R/W E , =5.0 0.7 0.75 1.5 mA Driving Voltage( LCD ) 5.5 4.5 Vlcd 5.0 V Driving Current( LCD ) Ilcd 0.2 0.4

Text: . TRANSFLECTIVE(W/ BACKLIGHT) TYPE DIM, A B 8,7 4,8 WITH BACKLIGHT 12,7 NO BACKLIGHT 8,8 USM&: 20x4 1.60 , - - - SYMBOL - \ V SEG 40 LCD CONTROLLER LSI DRIVER 0 ^ 1 i \ \ o L i_ " , ] . . LCD PANEL VDD - Vo - \ V DRIVER £ LED BACKLIGHT 4.75 [0.187] 0.60 [0.024 , Io l 0.4 V ABSOLUTE MAXIMUM RATINGS ITEM Supply Voltage for Logic Supply Voltage for LCD , /C X = S (standard), or H (high) LCD M O DE " STN REFLECTIVE STN TRANSFLECTIVE TN REFLECTIVE TN

This is a 20x4 Arduino compatible LCD display module with high speed I2C interface. It is able to display 20x4 characters on two lines, whitecharacterson blue background.

Generally, LCD display will run out of Arduino pin resource. It needs 6 digital pins and 2 power pin for a LCD display. If you want to build a robot project, it will be a problem with Arduino UNO and LCD display.

This I2C 20x4 LCD display module is designed for Arduino microcontroller. It is using I2C communication interface, With this I2C interface, only 2 lines (I2C) are required to display the information on any Arduino based projects. It will save at least 4 digital / analog pins on Arduino. All connector are standard XH2.54 (Breadboard type). You can connect it with jumper wire directly.

This 1602 LCD module has 8 I2C address in all, from 0x20 to 0x27. You can set one according to your requirements, avoiding the confliction of I2C address. And its contrast can be adjusted manually.