atlas wb11 display screens for sale

The Atlas WB-11 is the most popular Atlas wheel balancer that we sell. Low price, dependability and repeatable accuracy make the Atlas WB-11 one of the most popular models of the entire Atlas line of computer wheel balancers.The Atlas WB-11 is very a simple, yet sophisticated wheel balancer. Each electrical component part is virtually "plug and play" so repair is easy when it is time to replace parts.

The Atlas WB-11 is capable of self-diagnosing problems and displays error codes so the operator can make the necessary adjustments or repairs in his own shop. There is no need to wait for the high priced service technician to visit your store. The simplicity of the Atlas WB-11, both in ease of use and ease of repair, make this balancer the perfect choice for your shop. The Atlas WB-11 wheel balancer handles wheels that weigh up to 130 LB.

Atlas ATWB11The Atlas WB 11 is our newest addition to the Atlas line of wheel balancers. The Atlas WB 11 is designed for those shops balancing 10-20 sets of passenger tires per day.

The improved computer technology of the Atlas WB 11 wheel balancer, coupled with the newly designed software package makes the Atlas WB 11 a perfect choice for the service center balancing ten to twenty sets of wheel assemblies per day. The Atlas WB 11 has a newly designed keypad and display screen that is user-friendly and allows the operator to input and retrieve data very easily.

The Atlas WB 11 wheel balancer handles wheels that weigh up to 120 LB. For more information on our Atlas wheel balancers or any of our other products, please feel free to contact our office toll free at 888-318-8665

The Atlas WB-11 has a foot pedal auxiliary brake that allows the operator to hold the wheel assembly in the correct position when attaching the wheel weight to the rim.

Finally, the Atlas WB 11 uses a newly designed computer board system that makes replacement of the computer board as easy as plug and play. Many of the Asian manufacturers are using computer technology that is over ten years old. All the Atlas and Coseng balancers are implementing the newest and most reliable computer technology available. This improved technology is one of the many reasons that Coseng and Atlas balancers will provide years of reliable service.

I have used the Atlas WB11 to balance more than a dozen sets of race tires for myself and others as well as more than a dozen sets of street tires for myself and others. The best feature is the ability to set the resolution to 1/10th of an ounce and the fine button that will read down to .05 ounce. Friends have commented that they have never had a set of tires on their Porsche, BMW, and other performance cars with absolute zero vibration at speed. This machine has quickly become popular with all my friends. It takes a little extra time but perfection is achievable with this machine. The only challenge is lead weight strips that can be precisely trimmed are becoming more difficult to find.

The Atlas WB11 is capable of self-diagnosing problems and displays error codes so the operator can make the necessary adjustments or repairs in his own shop. There is no need to wait for the high priced service technician to visit your store. The simplicity of the Atlas WB11, both in ease of use and ease of repair, make this balancer the perfect choice for your shop. The Atlas WB11 wheel balancer handles wheels that weigh up to 130 LB.

Auxiliary Brake Pedal:This Atlas Wheel Balancer has a foot pedal auxiliary brake that allows the operator to hold the wheel assembly in the correct position when attaching the wheel weight to the rim.

Newly Designed Computer Board:This Atlas Wheel Balancer uses a newly designed computer board system that makes replacement of the computer board as easy as plug and play. Many of the Asian manufacturers are using computer technology that is over ten years old. All of the Atlas balancers are implementing the newest and most reliable computer technology available. This improved technology is one of the many reasons that Atlas balancers will provide years of reliable service. This is a self-calibrating computer wheel balancer. There is no need to calibrate the balancer each morning when you turn it on.

Keypad and Screen: This Atlas Wheel Balancer has a newly designed keypad and display screen that is user-friendly and allows the operator to input and retrieve data very easily. This Atlas Wheel Balancer has several different wheel weight positioning modes that allow the operator to the spin the wheel assembly one time and identify several different weight positions with just a touch of the button. Many custom wheel owners want their stick on wheel weights to be applied to the inside of the rim, and this wheel balancer shows the operator exactly how much weight is required and where to apply the weight on the inside of the rim with just one spin. Conventional steel wheels require a clip on weight to be attached to the outside and the inside of the rim. The Atlas Wheel Balancer can automatically calculate where the weights need to be placed with just the touch of a button.

The Atlas WB 11 is our newest addition to the Atlas line of wheel balancers. The Atlas WB 11 is designed for those shops balancing 10-20 sets of passenger tires per day.

The improved computer technology of the Atlas WB 11 wheel balancer, coupled with the newly designed software package makes the Atlas WB 11 a perfect choice for the service center balancing ten to twenty sets of wheel assemblies per day. The Atlas WB 11 has a newly designed keypad and display screen that is user-friendly and allows the operator to input and retrieve data very easily.

The Atlas WB 11 wheel balancer handles wheels that weigh up to 120 LB. For more information on our Atlas wheel balancers or any of our other products, please feel free to contact our office toll free at 888-318-8665

The Atlas WB-11 has a foot pedal auxiliary brake that allows the operator to hold the wheel assembly in the correct position when attaching the wheel weight to the rim.

Finally, the Atlas WB 11 uses a newly designed computer board system that makes replacement of the computer board as easy as plug and play. Many of the Asian manufacturers are using computer technology that is over ten years old. All the Atlas and Coseng balancers are implementing the newest and most reliable computer technology available. This improved technology is one of the many reasons that Coseng and Atlas balancers will provide years of reliable service.

ATLAS Equipment Sales offers a one year LIMITED structural parts warranty on all Atlas wheel balancers. Atlas Equipment Sales warrants the equipment to the original purchaser against defects in material or workmanship under normal use for a period of one year from the date of purchase. This limited warranty shall be limited to the repair or replacement of materials or parts found defective, at the discretion of Atlas Equipment Sales. Electrical component parts carry a 90 day warranty. Motors carry a one year warranty. We stock a complete parts inventory and employ several full time technical advisors that can “walk you through” any issues that may arise with your Atlas wheel balancer.

Our LIMITED warranty policy (one year parts only) does not include a labor warranty. Our products are sold at such a competitive price that Atlas Equipment cannot afford to send technicians into the field to repair the Atlas wheel balancers. We assume that the buyer of our wheel balancer is mechanically inclined or has employees that are mechanically inclined.

We offer a toll free number (800-768-4104) for service and parts information. This toll free number is directed to Atlas Indianapolis, IN. location. The service and parts department is open from 8 am to 5 pm EST from Monday to Friday. The department is SOMETIMES open on Saturdays, subject to the availability of our service technicians.

Our LIMITED warranty policy (one year parts) requires the alleged defective part to be returned to Atlas Equipment Sales (freight ppd.-customer pays the freight) BEFORE the replacement part can be sent out. If the defective part is an integral part of the machine, and the loss of this part will not allow the machine to work properly, Atlas Equipment Sales can waive the “normal” return policy in certain situations so there is minimal down time for the operator. If necessary Atlas Equipment Sales can charge the customer’s credit card for the replacement part when the part is shipped and then credit the amount of the part when the defective part is returned. To expedite a part replacement or exchange, the use of a digital photo is the best answer. If the customer will furnish Atlas Equipment Sales with digital photos that identify a broken part or some other issue; then our service techs may waive the need for an old part to be returned. The replacement part can be shipped the same day. A digital photo leaves nothing to the imagination. Our service technicians can only help if they are provided with the most accurate information. We encourage the use of digital photos to help speed the process.

Atlas Equipment has a service department with an excellent reputation. The old adage that compares the attitude of the customer to the type of service received rings true for Atlas Equipment Sales. We sell quality products with very few warranty issues. When there is a warranty issue (or an out of warranty issue) we want to get the customer back in business as quickly as possible. A good attitude from the Atlas service technician coupled with a positive attitude from the customer will produce a satisfactory outcome for both parties.

Returned goods must be authorized to be returned (in writing) by Atlas Equipment Sales and must be prepaid to a designated location. All returns are subject to a 15% handling/restocking charge. Returned goods must be in like-new condition complete with warranty and original shipping papers.

The Atlas® WB11 is the most popular Atlas® wheel balancer that we sell. Affordability, dependability and repeatable accuracy all make the WB11 one of the most biggest sellers in our line of computerized wheel balancers. The WB11 is very a simple, yet sophisticated wheel balancer. Each electrical component part is virtually “plug and play” so repair is easy when it is time to replace parts.

The Atlas® WB11 is capable of self-diagnosing problems and displays error codes so the operator can make the necessary adjustments or repairs in their own shop. There is never any need to wait for a high-priced service technician to visit the store. The WB11 also handles a wide range of wheels on the market with a capability of up to 32″ diameter rims and a weight capacity of over 130 lbs. The WB11 comes standard with a quick-release nut for securing wheels and a set of 4 cones to accomodate center holes from 1.75″ up to 5.18″. An adapter kit made up of a larger cone and a spacer, the

The Atlas WB 11 is the most popular Atlas wheel balancer that we sell. Low price, dependability and repeatable accuracy make the Atlas WB-11 one of the most popular models of the entire Atlas line of computer wheel balancers.

The Atlas WB-11 has several different wheel weight positioning modes that allow the operator to the spin the wheel assembly one time and identify several different weight positions with just a touch of the button.

Many custom wheel owners want their stick on wheel weights to be applied to the inside of the rim, and the Atlas WB-11 shows the operator exactly how much weight is required and where to apply the weight on the inside of the rim with just one spin. Conventional steel wheels require a clip on weight to be attached to the outside and the inside of the rim. The Atlas WB-11 can automatically calculate where the weights need to be placed with just the touch of a button.

The Atlas WB-11 has a foot pedal auxiliary brake that allows the operator to hold the wheel assembly in the correct position when attaching the wheel weight to the rim.

Finally, the Atlas WB 11 uses a newly designed computer board system that makes replacement of the computer board as easy as plug and play. Many of the Asian manufacturers are using computer technology that is over ten years old. All of the Atlas balancers are implementing the newest and most reliable computer technology available. This improved technology is one of the many reasons that Atlas balancers will provide years of reliable service.

The Atlas WB-11 is very a simple, yet sophisticated wheel balancer. Each electrical component part is virtually "plug and play" so repair is easy when it is time to replace parts. The Atlas WB-11 is capable of self-diagnosing problems and displays error codes so the operator can make the necessary adjustments or repairs in his own shop. There is no need to wait for the high priced service technician to visit your store. The simplicity of the Atlas WB-11, both in ease of use and ease of repair, make this balancer the perfect choice for your shop.

The Atlas calibration fixture system allows the owner of an Atlas Edge 101 or Atlas Edge 201 computer alignment machine to perform sensor calibration procedures in his shop.

The Atlas calibration system is easy to use and takes less than 15 minutes to calibrate all four sensor heads. The entire calibration procedure is included in the software and the step by step (on screen) instructions are easy to view and understand. The Atlas alignment machines rarely need calibration, but many of our customers want the ability to perform “proactive scheduled maintenance” to make sure their equipment is always in perfect operating condition.

Other customers may just want to perform a yearly checkup on their alignment equipment, so they do not want to make an outright purchase of the calibration fixture. PHS Lifts offers the calibration fixture for sale (at a discounted price) when the customer buys their Atlas alignment machine, or the customer may “rent” the calibration fixture for two days for a small daily fee. (Customer will also be responsible for all UPS shipping charges and insurance). All Atlas wheel service equipment is designed so that our customers can identify issues and make simple repairs in their own shops.

There is no need for “waiting on the little white van” and paying exorbitant service call charges. If you can repair a car, then calibrating your Atlas alignment machine will be a snap.

FORBI D D EN ! M a n da t or y! Operations or jobs to be performed compulsorily H a za r d! Be especially careful Bluetooth brands are property of their owners, and are used by Atlas Equipment under license. Atlas Cyclops...

At las Equipm ent shall be ent it led t o m ake any changes t o t he m odels described in t his m anual at any t im e for reasons of a t echnical and com m ercial nat ure. Atlas Cyclops Caution...

• GREEN LED fl ashing  measurement is within tolerance, exactly at the center • RED LED fl ashing and GREEN LED steady on  measurement is within tolerance • RED LED on  measurement is NOT within tolerance Atlas Cyclops Machine Composition...

Clamps with target The self-centering clamps with removable tabs will be fi tted with a target (see Figure 3). 3-point self-centering resting clamps, fi tted with targets (for rims from 8’’ to 24’’) Figu r e 3 Atlas Cyclops Machine Composition...

Clamp + target calibration and progressive production number for traceability, are included also in the above code. 3D object characterization in space Graphic symbol sticker that shows the position (see part 5.2.2), applied Figu r e 4 both on target on clamp Atlas Cyclops Machine Composition...

Figu r e 5 Steering lock The steering lock is a tool used to keep vehicle steering in a fi xed position. It is used before the adjustment procedure, as shown by the instructions displayed during program. Atlas Cyclops Machine Composition...

In the menu item “Confi guration” select the option “target assembly”. As soon as targets are in place and have been optimized, the screen represented in fi gure 8 will appear. Carefully align the 4 targets by matching the arrows with the targets above. If Atlas Cyclops Transport And Installation...

If you need to work on vehicles with long wheelbases, turn plates can be moved forward up to another 1’ 3”. The maximum distance from the rear wheels to the center of the 3D camera units is 10’ 2”. Atlas Cyclops Transport And Installation...

Le ft H a n d m ou n t in g br a ck e t h ole pa t t e r n Righ t H a n d m ou n t in g br a ck e t h ole pa t t e r n Atlas Cyclops Transport And Installation...

You then have a chance to confi rm your choice: Detector Keypad PC Keypad Description It cancels. It goes back to the introduction page. (part 9) Final confi rmation of machine switching off Atlas Cyclops Switching TheMachine On And Off...

3D cameras will anyway automatically switch off after approximately 5 minutes if no data are received (ex. cabin is off). They can also be manually switched off (see part 3.4.2) when they are not needed. Atlas Cyclops Switching TheMachine On And Off...

Select “GROUPS CONFIGURATION” from program confi guration page, as explained in part 8 You can edit system parameters, database profi le, and specify which parts are fi tted on the machine, and parts type as well. Atlas Cyclops Program Configuration...

Description It goes back to the start confi guration page. (part 9.1) It moves selection up. It moves selection down. It confi rms selection. Select “DATABASE” option, and confi rm. The following screen will be displayed: Atlas Cyclops Program Configuration...

MAKES of the vehicles circulating in the different countries and regions all over the world. Using key F5 , you can hide and/or display any profi le so as to manage Database according to your needs. Atlas Cyclops Program Configuration...

Figu r e 1 7 By selecting any group and pressing F4 you can also customize your profi le by hiding and/or displaying the available makes, with key F5 Displayed Make Hidden Makes Figu r e 1 8 Atlas Cyclops Program Configuration...

“connect” the 4 targets located on the wheels. The time taken by the following phase for selecting make and model and for displaying technical data is therefore used by the system also for the recognition and optimization of the 4 targets. Atlas Cyclops Vehicle Diagnosis And Adjustment...

= Target recognized and in the process of being optimized (GREY symbol) = Target recognized and optimized / invalid measures (YELLOW symbol) = Target recognized and optimized / valid measures (GREEN symbol) = Target not required in this phase (BLACK symbol) Atlas Cyclops Vehicle Diagnosis And Adjustment...

(part 8.1) Figu r e 2 1 Press F4 to select vehicle make and model of the selected group (see Figure 21). Selected Vehicle Make Selected Vehicle Model Figu r e 2 3 Atlas Cyclops Vehicle Diagnosis And Adjustment...

NOTE: To speed up selection phase, you can type the name of vehicle make or model, or part of them, on the PC keyboard, and then scroll the list until fi nding the desired one. Atlas Cyclops Vehicle Diagnosis And Adjustment...

See (*) Key description It displays vehicle technical specifi cations next page, and any graphic animation. See (*) Key description It changes rim diameter value It goes to out-of-center operations (part 9.5) (*) Key description Atlas Cyclops Vehicle Diagnosis And Adjustment...

Simply position the clamp at “12 o’clock”: the program will proceed automatically. If instead you press F1, the error is not considered. You may not be able to complete the procedure when performing the run-out. Figu r e 2 5 Atlas Cyclops Vehicle Diagnosis And Adjustment...

To carry out the thrust out-of-center operation, it is recommended to carefully follow the displayed instructions. The starting point is acquired a little further ahead, so that it always remains inside the tables also on the second point, thus avoiding any small gaps. Atlas Cyclops Vehicle Diagnosis And Adjustment...

Vehicle Thrust Direction (back) Target Point Figu r e 2 7 Start moving the vehicle backward, very slowly, until the vehicle arrow matches the target point. Vehicle Matches Target Point Figu r e 2 8 Atlas Cyclops Vehicle Diagnosis And Adjustment...

Move vehicle forward again, until vehicle arrow matches target point (fi nal point). “STOP” will be displayed for approx. three seconds, and measurement readings acquired. The thrust out- of-center procedure has been completed. Vehicle Matches Target Point Figu r e 3 0 Atlas Cyclops Vehicle Diagnosis And Adjustment...

2. Brake wheels with hand brake, then lock brake pedal with the pedal depressor tool (this operation is necessary when carrying out a steering for kingpin correct calculation). 3. Settle vehicle front and rear ends (necessary only if vehicle had been previously lifted and the suspensions unloaded). Atlas Cyclops Vehicle Diagnosis And Adjustment...

(part 9.6 on page 30) When the alignment has been achieved, the “STOP” symbol is displayed, signaling that the program is taking the vehicle measurements. The program proceeds automatically only after the wheels have been aligned. Atlas Cyclops Vehicle Diagnosis And Adjustment...

(*) It displays vehicle diagnosis page (part 9.9) (*) Type of steering to be made: • Steering at 20° • ACK steering (at 20° with steering geometry) • Steering at 10° • Max. steering Atlas Cyclops Vehicle Diagnosis And Adjustment...

After carrying out the steering procedure (see part 9.8), a diagnosis page showing a summary of the operations carried out on vehicle rear axle (Figure 34) will be displayed. Figu r e 3 4 Atlas Cyclops Vehicle Diagnosis And Adjustment...

(Figure 34). If you press F3 from here , program will allow the printout of diagnosis measurements. Press F4 to continue with data adjustment, program will display Figure 35, press F4 again to confi rm. Figu r e 3 5 Atlas Cyclops Vehicle Diagnosis And Adjustment...

Follow the displayed instructions to carry out adjustment preliminary operations. Press F4 to continue. 1. Place steering wheel in straight position. 2. Lock steering wheel with steering lock tool, and continue. Figu r e 3 7 Atlas Cyclops Vehicle Diagnosis And Adjustment...

Pc Keypad Description It changes values displaying layout (large numbers/large cursors) “Jack-Hold” procedure (adjustment with raised wheels) It displays vehicle technical specifi cation page. (part 9.4) It continues to front axle adjustment. (part 9.12) Atlas Cyclops Vehicle Diagnosis And Adjustment...

“ frozen” . Then adjust front axle Caster Measurement Front Camber Measurements Front Partial Toe-In Figu r e 3 9 Measurements Atlas Cyclops Vehicle Diagnosis And Adjustment...

Front toe-in adjustment procedure with steered wheels is started by pressing F3 from front adjustment page The following picture, requesting to steer left or right, will be shown. Press F5 to confi rm. Figu r e 4 0 Atlas Cyclops Vehicle Diagnosis And Adjustment...

(Figure 39). Figu r e 4 1 Detector Keypad Pc Keypad Description It returns to front adjustment page display. It de-freezes / freezes LH partial toe-in It de-freezes / freezes RH partial toe-in Atlas Cyclops Vehicle Diagnosis And Adjustment...

It displays the additional function menu. (See part 9.14) It displays vehicle technical specifi cation page. Operations completed! Customer data entry and printout. (See part 9.15) It returns to rear adjustment phase. (See part 9.11) Atlas Cyclops Vehicle Diagnosis And Adjustment...

DATABASE: it enables to display the vehicle selection page (9.3) and to select a different vehicle if necessary CASTER ADJUSTMENT: see part 9.12. Figu r e 4 3 Atlas Cyclops Vehicle Diagnosis And Adjustment...

It confi rms selection. 9.15 Printout of Measurements taken By selecting the following key from the customer data entry page , the following page will be displayed: Vehicle and customer data entry Figu r e 4 4 Atlas Cyclops Vehicle Diagnosis And Adjustment...

(part 9.14 on page 38) It displays a print preview of the test carried out (part 9.15) It goes back to start page without storing test Figu r e 4 5 Atlas Cyclops Vehicle Diagnosis And Adjustment...

Test date and time Vehicle being tested and vehicle owner data Front axle data table Rear axle data table Vehicle being tested manufacturing data Vehicle being tested diagnosis data Vehicle being tested data after adjustment Atlas Cyclops Vehicle Diagnosis And Adjustment...

F5, as described below in Figure 49. Press F1 to quit. Note: By selecting “All makes” group using F5, a profi le where all the vehicles of all the makes included in the database will be displayed New Group Figu r e 4 9 Atlas Cyclops Database Customization...

To create customized vehicles and store them inside the database, you shall fi rst display the page of the measurements and tolerances supplied by the manufacturer of an already-existing vehicle (see part 9.4). Press “Insert” on the keyboard: The following screen will be displayed: Atlas Cyclops Database Customization...

• Manufacturing end date • Right wheelbase • Rim diameter • Load conditions • Front track • Tank conditions Use the following keys for data selection: Move selection to the following datum. Move selection to the previous datum. Atlas Cyclops Database Customization...

Figu r e 5 2 After having selected rim diameter, the following data to be entered are vehicle track and wheelbase, in the following screen: Atlas Cyclops Database Customization...

Figu r e 5 3 Then enter tank and load conditions. Now the screen will look as follows: Highlighted Point Figu r e 5 4 Atlas Cyclops Database Customization...

Now you shall enter vehicle standard tolerance values as for: FRONT AXLE: REAR AXLE: • Toe • Toe • Camber • Camber • Caster • Thrust angle • Kingpin • Included angle • Max. steering Select data as described above, and enter values. Atlas Cyclops Database Customization...

Using the same procedure, you can edit the values of a customized vehicle without having to create a new one. The fi nal screen will be like the one of Figure 55 with the additional item: “Edit customized vehicle” Select this option to edit vehicle data. Atlas Cyclops Database Customization...

You have to display vehicle database, and select the customized vehicle you wish to delete, then press Ctrl + Delete: W a r n in g: If a customized vehicle is deleted, it will no longer be possible to restore it, unless you have a database backup copy. Atlas Cyclops Database Customization...

To update the database, proceed as follows: Select “Database Management” option from program confi guration menu (see part 8) as specifi ed in Figure 58, and press F4 to continue. Figu r e 5 8 Atlas Cyclops Program AndDatabase Protection...

When a USB fl ash disc key is inserted (such as the one supplied with the machine, and containing system Back-Up), the keys for database management are displayed, as shown in Figure 60. Flash Disc Detected SMARTCARD Serial Number Figu r e 6 0 Atlas Cyclops Program AndDatabase Protection...

 Allows copying the correct path of the DATABASE fi le previously downloaded from internet and pasted inside the USB fl ash disk ROOT. Updated databases shall then be released through “Token” import. Atlas Cyclops Program AndDatabase Protection...

Of course, it is not recommended to abruptly power cabin off; follow the correct switching off procedure: • Press “Esc” on keyboard to go back to the introduction page (see part10). • Switch machine off following the usual procedure (see part 6.2). Atlas Cyclops Errors During Measurement...