40 pin tft lcd pinout manufacturer

This breakout board is designed to work in conjunction with our TFT displays to give you a faster, more flexible development process. This development tool will jumpstart your workflow by providing an all-in-one solution to run your hardware application and act as an intermediate PCB. With a compact design that allows for easy placement in your application, breakout boards make it easier than ever to connect with any MCU and see your design in action. This particular breakout board has a 40-pin FFC connector, 2.54mm pitch, and is breadboard friendly. It has a configurable LED driver with PWM, a power LED indicator, and open-source hardware.

Adjust the length, position, and pinout of your cables or add additional connectors. Get a cable solution that’s precisely designed to make your connections streamlined and secure.

Text: International Component Technology www.intcomptech.com Crimp to DF9M-31S-18D Hirose connector and 4 pin single row header (29 Hirose connector and 4 for 4 pin single row male header post for touch screen , Resistive Touch Screen Berg connector 4 pin female P/N 65801-004 LQ64D343 Panel 1 Sharp , Connections to 640×480 6.4" Panel MC9328MX1 Pin Number and Name on ADS Connector (2x34) Sharp 640x480 Panel Pin Number and Name (Hirose Connector ) Connector (2x34) Touch Screen Pin Number and

Abstract: lcd 2X20 8 pin lcd 3.2 SSD1289 32-inch lcd Color TFT LCD Module SSD1289 application note 3.2 tft color touch lcd display module LCD Module 2x20 display 2x20 lcd lcd 2X20 16 pin 18 inch lcd interface with microcontroller

Text: maximum clock frequency is 10 MHz. 2.5 Interface ( pin description) The table below describes the 40 pin interface to the QVGA LCD Module. A 2x20 pos (100 mil spacing) header connector facing down is , pin 39 supply the backlight. 2, 10, 40 Ground 3 CFG1 / PSX interface configuration pin , Color LCD Board Pin Numbering Copyright 2007 © Embedded Artists AB 3.2 inch QVGA TFT Color LCD - , P0.16 is used on v1.5 and above of the OEM Base Board. Pin 45 Figure 3 - 3.2 inch QVGA TFT

Text: pin ribbon header F-F connector 1 Any MC9328MX1 ADS to 3v/5v I/F Board 3V/5V I/F Board , International Component Technology www.intcomptech.com Crimp to DF9M-31S-18D Hirose connector and 4 pin single row header (29 Hirose connector and 4 for 4 pin single row male header post for touch screen , Resistive Touch Screen Berg connector 4 pin female P/N 65801-004 LQ64D343 Panel 1 Sharp , 640×480 6.4" Panel MC9328MX1 Pin Number and Name on ADS Connector (2x34) Conn ector (2x34

Abstract: LD128 LQ104V1DG11 60 pin LCD connector to vga 15 pin conversion R410-412 4-Pin HIROSE LQ104V1DG51 sharp lcd service manual K1958 touch screen 3M

Text: Included with MC9328MX1 ADS 34 pin ribbon header F-F connector Freescale Semiconductor, Inc , www.intcomptech.com Crimp to DF9M-31S-18D Hirose connector and 4 pin single row header (29 Hirose connector and , connector 4 pin female P/N 65801-004 LQ64D343 Panel 1 Sharp datasheet LD-10107 May substitute , MC9328MX1 Pin Number and Name on ADS Connector (2x34) Conn ector (2x34) Sharp 640x480 Panel Pin Number and Name (Hirose Connector ) Touch Screen Pin Number and Name Function 2 1 1

Abstract: HX121WX1 FI-JH40S-HF10 backlight smd HX121WX1-100 15KV THC63LVDM83A 2.6 TFT color LCD Module 240 X 320 lvds 40 pin lcd led Kyocera lcd cross reference

Text: 1 Connector (CN DC/DC Gamma Vcom VDD TFT LCD Panel BACK LIGHT (Fluorescent Lamp) 1280 , ) PRODUCT GROUP REV ISSUE DATE TFT LCD PRODUCT P2 2008. 01. 14 4.0 OPTICAL SPECIFICATIONS , Electrical Interface Connection CN1 Interface Connector (FI-JH40S-HF10, Manufactured by JAE) Pin No , data signal (+) 40 GND8 Pin No. Symbol 1 GND1 2 CONNTST 3 Function , Back-light Interface CN2 LED FPC Connector (04-6298-009, Manufactured by Kyocera) Pin No. Symbol

Text: . 20 7. Connector & Pin Assignment . 21 7.1 TFT LCD Module: LVDS Connector , . 23 7.3 Lamp Connector Pin Assignment , . Otherwise the TFT Module may be damaged. 10) At the insertion or removal of the Signal Interface Connector , be sure not to rotate nor tilt the Interface Connector of the TFT Module. 11) After installation of

Abstract: G065VN01 lvds connector 31 pin 4 pin inverter G065VN01V0 7 inch tft tv circuit diagram DF9B-31P-1V lcd screen lvds 40 pin LVDS connector DF9B-31S-1V

Text: . 21 7. Connector & Pin Assignment. 22 7.1 TFT , S192 2 CCFL Lamp connector (4 pin ) Inverter BHR-04VS-1 Mating type: SM04( 4.0 )B-BHS , -04VS-1 Mating Model Number SM04( 4.0 )B-BHS-1-TB 7.3 Lamp Connector Pin Assignment Pin # Cable color , . 22 7.3 Lamp Connector Pin Assignment , connector (31 pin ) Hirose DF9B-31P-1V Panel Controller DC/DC converte r Gamma Correction

Text: Female connector : 2x13 pin , 2.54 mm pitch connect it to Raspberry Pi© Model B port P1 9/24 C-Berry Product specification 6.2 Interface of C-Berry TFT Adapter connector X3 Symbol Pin no , of C-Berry TFT Adapter Software 8.1 8.2 8.3 9 Interface of C-Berry TFT Adapter connector X2 Interface of C-Berry TFT Adapter connector X3 Hardware 7.1 7.2 8 Electrical , specification Version 1.2 6 Interface description 6.1 Interface of C-Berry TFT Adapter connector X2

Text: Connector Pin Definition (P15) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12V TFT , Pin header 40 P19 ATX Power Supply ATX 20 P15 TFT Screen Output 30 P16 , 7.2.13 TFT Screen Output Table 7-18. TFT Screen Output Connector Pin Definition (P15) Signal Name , . . . . . . . . . . Y-C Video Connector Pin Definition (P21) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Standard VGA Connector Pin Definition (P7) . . . . . . . . . .

Abstract: 7 inch tft tv circuit diagram lcd screen lvds 40 pin diagram G065VN01 DF9B-31P-1V LVDS 20 pin hirose connector LVDS 15 TFT 20 pin lvds lvds connector 31 pin lcd screen lvds 40 pin TFT LCD display circuit diagram of 30 pin out

Text: . 21 7. Connector & Pin Assignment. 22 7.1 TFT LCD , S1 S192 2 CCFL Lamp connector (4 pin ) Inverter BHR-04VS-1 Mating type: SM04( 4.0 )B-BHS , -04VS-1 Mating Model Number SM04( 4.0 )B-BHS-1-TB 7.3 Lamp Connector Pin Assignment Pin # Cable color , . 22 7.3 Lamp Connector Pin Assignment , connector (31 pin ) Hirose DF9B-31P-1V Panel Controller DC/DC Converter r Gamma Correction

Text: .19 7. Connector & Pin Assignment .20 7.1 TFT LCD Module: LVDS Connector , .22 7.3 Lamp Connector Pin Assignment , the Interface Connector of the TFT Module. 11) After installation of the TFT Module into an enclosure , . G150XG03 V3 rev. 0.0 19/29 G150XG03 V3 7. Connector & Pin Assignment Physical interface is

Text: G 5v-tolerant User Interface Connector Pin Signal Signal Pin 1 GND TXCLK+ 2 , Connector Pin Signal Signal Pin A1 GND IDE RESET# B1 A2 USB D0- GND B2 , Connector Pin Signal 1 +5V A12 GPIO2 IDE D12 B12 A13 GPIO3 IDE D2 B13 2 , holes G 8-bit and 16-bit PC/104 module support External Connections: G 80- pin connector for IDE, USB, LPT, and digital I/O G 14- pin header for COM1-COM2 G

Abstract: LCD DISPLAY 14 PIN CONNECTOR DF9B-31P-1V DF9B-31S-1V HLD1045E SM02 3.2 tft color touch lcd display module "failure rate" lcd 3.5 Inch TFT LCD Touch Screen Display 7 inch TFT LCD circuit

Text: TITLE: 10.4" HIGHEND TFT LCD MODULE 4. INTERFACE CONNECTORS PIN ASSIGNMENT Input Input Input , -31S-1V(Hirose) connector pin assignment table PIN 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 , (8.0)B-BHS(JST) connector pin assignment table: Pin Number Symbol Function 1 3 CTH , SPECIFICATIONS NUMBER: HLD 1045E REV. 1 PAGE 1 OF 18 TITLE: 10.4" HIGHEND TFT LCD MODULE , : +49-89-894450-90 SPECIFICATIONS NUMBER: HLD 1045E REV. 1 PAGE 2 OF 18 TITLE: 10.4" HIGHEND TFT LCD MODULE

Abstract: 40 pin LCD connector ADP3338AKCZ smd xtal C5149 smd sot-23 2A1 redcap voltage regulator sot 223 Casio 1.6 color TFT LCD panel casio tft lcd panel

Text: , Casio or Type 2/3/4 TFT ) or as GPIOs. Table 5-3: TFT Type 3 Extended LCD Connector (H3) Pin Name , ) LCD panel. All the necessary signals are provided on the Connector H1, 16- pin Extended LCD Connector H2, and the 26- pin TFT Type 3 Extended LCD Connector H3. For detailed connection , . 11 4.2 CPU Bus Connector Pin Mapping . . . . . . . . . . . . . . . . . . . . . . 12 5 LCD , 6.5.2 Extended LCD Connector . . . . . . . . . . . . . . . . . . . . . . 6.5.3 TFT Type 3 Extended LCD

Text: .18 7. Connector & Pin Assignment .19 7.1 TFT LCD Module: Input Connector , .19 7.3 Lamp Connector Pin Assignment , Interface Connector , be sure not to rotate nor tilt the Interface Connector of the TFT Module. After , Pin Assignment Physical interface is described as for the connector on module. These connectors are

Text: LCD employs three interface connections, a 41 pin connector is used for the module electronics and two connectors, a three pin connector is used for the integral backlight system. The electronics interface connector is model DF9B-41P1V manufactured by Hirose and its mate is DF9B-41S-1V. The pin configuration for the connector is shown in the table below. Table 3: MODULE CONNECTOR PIN CONFIGURATION Pin , connector part number is SM02(8.0)B-BHS-1-TB or equivalent. The pin configuration for the connector is

Text: employs three interface connections, a 41 pin connector is used for the module electronics and two connectors, a three pin connector is used for the integral backlight system. The electronics interface connector is model DF9B-41P1V manufactured by Hirose and its mate is DF9B-41S-1V. The pin configuration for the connector is shown in the table below. Table 3: MODULE CONNECTOR PIN CONFIGURATION Pin Symbol , -1-TB or equivalent. The pin configuration for the connector is shown in the table below. SEP 2001

Text: .20 7. Connector & Pin Assignment . 21 7.1 TFT LCD Module: LVDS Connector , .21 7.3 Lamp Connector Pin Assignment , the Interface Connector of the TFT Module. 11) After installation of the TFT Module into an enclosure , . Connector & Pin Assignment Physical interface is described as for the connector on module. These connectors

Text: . 19 7. Connector & Pin Assignment . 20 7.1 TFT LCD Module: LVDS Connector , . 22 7.3 Lamp Connector Pin Assignment , the Interface Connector of the TFT Module. 11) After installation of the TFT Module into an enclosure , connector . G150XG01 V1 rev. 0.2 19/28 G150XG01 V1 7. Connector & Pin Assignment Physical

Abstract: G104SN03V1 tft G104SN03 display connector v1 AU Optronics G104SN03 DF19-20S-1F AU Optronics lcd screen lvds 40 pin diagram LVDS connector 20 10.4 auo lcd

Text: .19 7. Connector & Pin Assignment . 20 7.1 TFT LCD Module: LVDS Connector , .20 7.3 Lamp Connector Pin Assignment , Interface Connector , be sure not to rotate nor tilt the Interface Connector of the TFT Module. After , CORPORATION 7. Connector & Pin Assignment Physical interface is described as for the connector on module

Text: . 19 7. Connector & Pin Assignment . 20 7.1 TFT LCD Module: LVDS Connector , . 22 7.3 Lamp Connector Pin Assignment , the Interface Connector of the TFT Module. 11) After installation of the TFT Module into an enclosure , connector . G150XG03 V2 rev. 0.0 19/28 G150XG03 V2 7. Connector & Pin Assignment Physical

Text: connections, a 41 pin connector is used for the module electronics and two connectors, a three pin connector , -41P1V manufactured by Hirose and its mate is DF9B-41S-1V. The pin configuration for the connector is shown in the table below. Table 3: MODULE CONNECTOR PIN CONFIGURATION Pin Symbol Description Notes 1 2 , pin configuration for the connector is shown in the table below. SEP 2001 http , connector part number is SM02(8.0)B-BHS-1-TB or equivalent. The pin configuration for the connector is

Abstract: 7 inch tft tv circuit diagram backlight inverter circuit diagram samsung lcd tv power supply diagrams 2SK1059 hp 17 lcd Inverter samsung lcd tv circuits diagrams connector SAMSUNG 30 PIN hp backlight inverter 2SK1339

Text: . INPUT TERMINAL PIN ASSIGNMENT 3.1. TFT LCD MODULE (Interface Signal & Power) Connector : Hirose DF14A-30P-1.25H Matching Connector : Hirose DF14S-30P-1.25C or Compatible Pin NO. Symbol Function Polarity , on/off control Connector Part NO. JST SM04( 4.0 )B-BHS-1-TB Input Voltage(+12V) - , -( 3 ) 1. Electrical Characteristics 1.1 TFT LCD Module 1.2 Back-light Unit 1.3 Inverter -( 4 ) 2. Block Diagram 2.1 TFT LCD Module 2.2 Backlight Unit -( 8

Text: the Connector H1, 16- pin Extended LCD Connector H2, and the 26- pin TFT Type 3 Extended LCD , Extended LCD Connector (H3) Pin Name H3 Pin number TFT Type 3 All Other LCD Display Modes GPO0 , Bus Connector Pin Mapping . . . . . . . . . . . . . . . . . . . . . . 12 5 LCD Interface Pin , LCD Connector . . . . . . . . . . . . . . . . . . . . . . 6.5.3 TFT Type 3 Extended LCD Connector . . , -bit TFT Type 4 (Epson ND-TFD) LCD panel support. • Connector for USB client support. • Oscillators

Text: customers" exact needs. Any reasonable request will be considered, such as replacing connector types , (4 MB) (typ.) -25°C to +70°C - 40 °C to +85°C 70 > 200"000 h MSM386SV ELAN310 33 soldered 2, 4 0 8 x 16 ISA TLL, RS485 RS232C RS232C SVGA 65545 ISA 1 MByt 24 Bit TFT 5V 1024 x 768 x 25 5V/570mA(4 MB) (typ.) 5V/220mA(4 MB) (typ.) -25°C to +70°C - 40 °C to +85°C 90 , x 4 Bit 5V/510mA(2 MB) (typ.) 5V/350mA(2 MB) (typ.) none -25°C to +70°C - 40 °C to +85°C

The Toradex module provides LCD interface(18/24-bit) which can be used to connect most of the RGB LCDs available in the market. On Apalis/Colibri Evaluation boards or Iris/Ixora/Viola carrier boards, a Unified Display Interface is provided to connect the RGB LCD to the EDT.

We have found the following 40 pin interface which many LCD manufacturers support (pin-outs mentioned below in the table), so we thought of doing an example display adapter board to make it easy for our customers.

NOTE: Generic Display Adapter Board design is just an example, not fully optimized for production. Toradex do not manufacture these boards, but we have given all design data.Also change the over-voltage and current resistors on the display adapter board according to the backlight power requirements of the LCD to connect.

NOTE: Please note that this version of the Generic Display Adapter is only compatible with displays supporting 40 pin standard interface pinout, in which resistivetouch screen signals are also available on the same connector.

Touch section is not compatible to adapter board LCD side 40 Pin connector(X7) due to touch signals not coming to 40 Pin flex cable, but via another four wire flex cable. We have for the same reason given another connector(X10) on adapter board which routes touch signals.

For Mass production, we usually make delivery among 2-8weeks, special size may need some longer time. In summary, based on our years of big output, we have been keeping good relationship with Taiwan LCD panel and IC suppliers, we had a steady supply even when there was heavy shortage of materials.

A: Usually 12 Months. If there is any defect upon using within the warranty period, we require our clients to return the goods to us, with shipping cost paid by us.

Maclight 5 inch tft lcd display modules have 800x480, 480x272, 640x480 typical resolutions. TN TFT and IPS display modes are available. the interface can be RGB, MCU, LVDS, HDMI, mipi interfaces.

The 5 inch IPS TFT is free viewing angle tft and wide temperature tft, that its working temperature can be up to -30~80°C, one IC driver solution with cost competitive,40-pin RGB interface available,