40 pin tft lcd pinout factory

This breakout board is designed to work in conjunction with our TFT displays to give you a faster, more flexible development process. This development tool will jumpstart your workflow by providing an all-in-one solution to run your hardware application and act as an intermediate PCB. With a compact design that allows for easy placement in your application, breakout boards make it easier than ever to connect with any MCU and see your design in action. This particular breakout board has a 40-pin FFC connector, 2.54mm pitch, and is breadboard friendly. It has a configurable LED driver with PWM, a power LED indicator, and open-source hardware.

Adjust the length, position, and pinout of your cables or add additional connectors. Get a cable solution that’s precisely designed to make your connections streamlined and secure.

Its application: Automotive display, automotive electronics, comm device, desktop monitor, digital photo frame, digital still camera, digital signage, digital video camera, e-book reader, edu&ent, electronic price tag, financial & tax, gaming, handheld&PDA, HMD VR AR, Healthcare, Home Appliance, Industrial application, instruments & meters, interactive whiteboard, laptop, medical imaging, MID UMPC, mobile phone, MP3 player Mp4 PMP, netbook PC, outdoor high brightness, Pad & Tablet, printer, pocket tv, portable dvd player, portable navigation, projector, smart bracelet, smart watch, stretched bar lcd, time & counter, transparent display, tv sets, video door phone, video wall, voip phone, other application

Its application: Automotive display, automotive electronics, comm device, desktop monitor, digital photo frame, digital still camera, digital signage, digital video camera, e-book reader, edu&ent, electronic price tag, financial & tax, gaming, handheld&PDA, HMD VR AR, Healthcare, Home Appliance, Industrial application, instruments & meters, interactive whiteboard, laptop, medical imaging, MID UMPC, mobile phone, MP3 player Mp4 PMP, netbook PC, outdoor high brightness, Pad & Tablet, printer, pocket tv, portable dvd player, portable navigation, projector, smart bracelet, smart watch, stretched bar lcd, time & counter, transparent display, tv sets, video door phone, video wall, voip phone, other application

We are always ready to provide customers with thoughtful 15.6 Inch VGA TFT Display, 4.3 inch TFT LCD 800x480, 15.6 Inch LCD Screen solutions, products and services, and we can meet customer needs in a very short time. We have always been adhering to the market concept of continuously extending the market development to a broader and higher space. Our company always adhere to quality first, we serve our customers attentively and strive to improve our professional level. Satisfactory service and high-quality products are our unremitting pursuit and driving force. We warmly welcome you to contact us to begin discussions on how we can bring this into being.

Traditional TFT LCD screen uses TTL interface, for which the power consumption is large and the anti-interference is not strong. LVDS interface technology allows TFT LCD to provide low voltage drive signal, low power and strong anti-interference performance.

A3: Yes. We provide both resistive touch panel and capacitive touch screens for all our TFT LCD screens. We also accept custom touch screen with small MOQ.

The quality of our 40 Pin 10.1 Inch 1280*800 Lvds Interface TFT LCD Display is superior to that of our competitors, but the price of it will never be higher to that of any other brand. Welcome to join us to promote green light, together we will make a better Future! As long as you have any questions about grinding and cutting, you can consult us.

※Price Increase NotificationThe TFT glass cell makers such as Tianma,Hanstar,BOE,Innolux has reduced or stopped the production of small and medium-sized tft glass cell from August-2020 due to the low profit and focus on the size of LCD TV,Tablet PC and Smart Phone .It results the glass cell price in the market is extremely high,and the same situation happens in IC industry.We deeply regret that rapidly rising costs for glass cell and controller IC necessitate our raising the price of tft display.We have made every attempt to avoid the increase, we could accept no profit from the beginning,but the price is going up frequently ,we"re now losing a lot of money. We have no choice if we want to survive. There is no certain answer for when the price would go back to the normal.We guess it will take at least 6 months until these glass cell and semiconductor manufacturing companies recover the production schedule. (Mar-03-2021)

Impact: ER-TFT043-7 is the same with ER-TFT043A1-7 in mechanical dimension and electrical spec in our testing.As old customer,we recommend you test samples before mass order.

ER-TFT043A1-7 is 4.3 inch IPS TFT LCD 800x480 dots display, with driver IC ST7262E43 and optional capacitive touch panel or resistive touch panel,superior display quality,full view angle and easily controlled by MCU such as PIC, AVR, ARDUINO,ARM and Raspberry portable or handheld device.PI.

It can be used in any embedded systems,car,mp4,gps,industrial device,security and hand-held equipment which requires display in high quality and colorful image.It supports rgb interface. FPC with zif connector is easily to assemble or remove.Of course, we wouldn"t just leave you with a datasheet and a "good luck!".Here is the link for 4.3"TFT Touch Shield with Libraries, Examples.Schematic Diagram for Arduino Due,Mega 2560,Uno and 8051 Microcontroller Development Board&Kit.

ER-TFT070A2-4 is the updated part number of ER-TFT070-4. It"s 800x480 dots 7" color tft lcd module display with ILI6122 driver ic,optional capacitive touch panel with controller and connector,optional 4-wire resistive touch panel screen with connector,superior display quality,super wide view angle and easily controlled by MCU such as 8051, PIC, AVR, ARDUINO, ARM and Raspberry PI.Equivalent with AT070TN90,AT070TN92.

I"ve bought myself one of these 3.5" TFT panels: https://www.aliexpress.com/item/32829704426.html and an accompanying 40 pin fpc to header adapter so that I can plug it into a breadboard. (Specifically, "ili9488 no touch")

I"ve got a project I"ve been working on that uses the fairly typical module that comprises a screen, touch sensor and sd card reader (http://www.lcdwiki.com/3.5inch_SPI_Module_ILI9488_SKU:MSP3520) and it works fine.

I"ve compared the pin listings on the store page to the schematic and whilst they"re not a perfect match, I"m still pretty sure I figured out how to connect what to where.

I know with the more beginner friendly module I simply need to hook up VCC, GND and LED and it works. Looking at the schematic for the module, the LED pin doesn"t actually power the backlight, but is instead connected to a transistor that completes the circuit if power is supplied to the LED pin.

Looking at the schematics, I"m guessing the "LEDA" or "A" pin is power in for the backlight, and the various "K#" or "LEDK" pins are GND. I"m finding the datasheet a little impenetrable, but I do see the "A" pin described as an "anode" and the "K" pins as "cathodes" which backs up my theory.

The lcd display I ordered is no longer available on AliExpress. I am attaching images cached from my order. It is similar to the maithoga branded one in Jean-Marc"s post above.

I am also attaching pictures of the flexible connector. The odd melting on the connector was there when it arrived, and makes me wonder if the lcd is really brand new (or a "correction" made at the factory). I ordered a breakout board with a connector for the 40 pin flex cable to make life easier.

I applied 3.7 volts to the the backlight anode pin with no results until the voltage was raised to between 8-9v. As the second attached image shows, there"s also an odd blue line across the display. Question: if/when this works, is there a "boost" pin that can be used to supply voltage for the backlight? (I saw this on schematics for similar ILI8961 screens). I don"t understand why on 3.7v circuits the LEDs are driven by 9volts.

Another question (of many): the smaller displays for the Arduino"s usually have separate pins for SDA/MOSI and AO/DC. I see SDA in the 8961 pinout spec, but no (single) data command line; just the parallel connections @David_Prentice mentioned. Why have a serial SPI interface AND still require all the parallel lines?

Also, just noting. I like this screen because of it"s size (2.7") and resolution (240x960). This should yield 64 (hopefully readable) characters per line at 15 pixels per character.