16x2 lcd module monochrome factory

A1:We are professional manufactory, which specializes in TN, HTN, FSTN, STN monochrome LCD,LCM,COB,COG modules more than 5 years in ShenZhen ! Our advanced full set equipments make sure good quality and competitive price!

Winstar WO1602I 16 characters x 2 lines COG monochrome lcd display module. This COG LCM has the outline dimension 51.2 x 20.7 mm and VA size of 40.0 x 10.0 mm. This series is built in with ST7032I driver and the interface is I2C. This series of module can be operating at temperatures from -20℃ to +70℃; its storage temperatures range from -30℃ to +80℃.

Each display can be configured in your choice of LCD mode, LED backlight type, and viewing angle. These monochrome LCDs are ideal for industrial and consumer applications where high stability and low-power consumption is a priority.

Our monochrome LCD displays can be configured to suit your product"s application with RGB LED backlights, low power backlights, single color backlights, or no backlight.

Monochrome lcd panel is low cost LCD screen, monochrome lcd display is the mainstream in custom lcd screen because its custom tooling fee is very cheap.Monochrome LCD display included standard graphic monochrome lcd display, character lcd module, monochrome segment lcd display, monochrome tft lcd module and custom lcd screen.The monochrome lcd screen structures have COG LCD (chip on lcd glass), COB (chip on board), COF (chip on film).

An seven segment lcd display is like the below picture, it can display numbers from 0 to 9 and several letters such as C, A, b E, L, and F by control some segments "on" and "off". it is the cheapest lcd display panel.

The segment lcd also could be in Icon lcd display, that is the display content are the custom segments based on customer"s application.each segment means one icon, we could design the icon on our application.

The familiar Characters lcd modules have 16x1, 16x2, 16x4 characters, 20x1, 20x2, 20x4 characters, and 40x2, 40x4 etc, characters lcd display module. An 16x2 lcd display means 16 characters x 2 lines character on the lcd. normally, one characters is made by 5x8 pixels, we could display numbers 1~9, and A~Z letters and most of characters on the 5x8 pixels per characters.

The standard graphic lcd resolution have 96x64、96x96、122x32、128x64、128x128、160x128、160x160、192x64、240x64、240x128、320x240 etc.we could display all the characters and image in the graphic lcd display. of course, the higher resolution lcd, the display effect of image would be better.

(What is lcd resolution: )Lcd resolution means how many pixels of lcd screen,128x64 lcd resolution means 128 column x 64 row pixels on the lcd screen, we also call it 128x64 lcd display. monochrome lcd resolution could be 320x240 (QVGA) or 480x240 maximum, tft lcd resolution could be VGA (640X480) or HD (1366x768, FHD(1920x1080) or 4k2k lcd resolution.

Yes, if you only need the low quantity monochrome lcd display for your project, you could choose Maclight standard monochrome lcd, Maclight have wide range standard Characters lcd and Graphic lcd module, including COB type and COG type for your choosing. please find the standard monochrome list in the end of article, welcome to contact Maclight at [email protected]

The tooling fee of monochrome lcd panel would be around 300~500 USD, if only the simple segment lcd panel, such as TN display mode, then tooling fee would be cheaper, but if the custom lcd screen is monochrome graphic lcd panel, such as STN display panel, the tooling fee would be little higher than TN lcd panel. because the tooling mask for stn lcd would be higher than TN lcd panel. but it is only the tooling fee for monochrome lcd panel.

If for custom monochrome lcd module that with IC chip on glass, we call it COG LCD module, the tooling fee would be more higher, because if for custom TN or STN lcd display panel, the tooling mask can be made by PI film, while for custom monochrome COG LCD module, the custom COG LCD tooling mask would be used the metal mask, the tooling fee would be more higher to around 1500~2000 USD.

Besides the custom lcds panel, for some custom lcd mode that in transmissive lcd or transflective lcd display mode, because lcd panel is passive display, instead of oled display, lcd panel can not emit light by itself, it have to use the backlight, the backlight tooling fee would be upper than 1000 USD or more, the more complicating structure on the backlight, the tooling fee would be higher. for saving the cost of tooling fee on lcd backlight, the simple structure would be cheaper.

The MOQ of custom lcd display for monochrome lcd is calculated based on the mother-glass of LCD panel, some person may ask, what is mother-glass of lcd panel? is it the mother of lcd panel? no, no,no..., it is just a joke, the mother-glass of lcd is the primary glass of lcd, we also call it ITO glass, because it have an ITO layer on the glass. the lcd panels are array on the mother glass in manufacturing lcd panel, and cutting it one by one after lcd cell production finished. the main mother glass sizes if 14"x16", as in lcd manufacturing, for stable running in the full-auto machine line, it is at least 50 set of 14"x16" for an production running, that is the smaller sizes of lcd, the bigger MOQ of lcd quantity is necessary.

1. Confirm the sizes what you would like to custom making? the custom mono lcd displays would be mainly less than 10", the custom sizes is up to the mother glass of lcd panels that is less than 14"x16". the custom mono lcd can be custom made the random sizes below 10".

If you would not like to custom lcd display, you could choose the standard lcd from the following list, it is no MOQ requirement for the standard lcd.

Monochrome lcd display have TN, STN LCD, monochrome tft lcd types. the monochrome lcd could be with or without backlight. even for monochrome lcd display, it have difference LCD colors for choosing, such as yellow-green mode, blue mode, gray mode, black-white mode, negative display mode and positive display available. the backlight color could be white, green, orange, yellow-green colors.

Character Display 16x2 1602A LCD Display Mono color Quick Details Type:TN display, Mono LCD Display Size:16*2 Supplier Type:Manufacturer Place of Origin:Guangdong, China Brand Name:Risenta Interface Type:4-bit or 8-bit MPU Resolution:16*2 Viewing direction:6 O"clock Outline...

Orient Display LCD displays are the general category that includes LCD display glass panels, character LCD modules, graphic lcd modules, Arduino LCD displays, and our featured JAZZ series graphic LCD displays.

Graphic LCD Displays: Our standard LCD Graphic display products range from 122 x 32 pixels to 320 x 240-pixel resolution. These displays are available in positive or negative STN, blue STN, FSTN, or FFSTN with multiple backlight color options. They can be either traditional Chip-On-Board (COB) LCDs or Chip-On-Glass (COG) LCDs for displays with a smaller footprint and lower power consumption. COGs come in the same display types and colors as our other LCD modules but are designed without a PCB to allow for a slimmer profile.

JAZZ Graphic LCD Displays: The series are exclusive for Orient Display 128 x 64 pixels with the selection of yellow green STN, blue STN, positive or negative FSTN display, with the options of yellow green, green amber, blue, red or RGB tricolor backlights, with or without resistive touch panels. JAZZ series have two sizes: 1.0” and 2.7”.

VTN Character LCD Displays: Orient Display VTN is vertical alignment LCDs which provide superior black background and then great contrast with the options of yellow green, green amber, blue, red or RGB tricolor backlights.

LCD Glass Screens (Panels): Orient Display LCD display panels include different options of polarizer in reflective (saving power), transmissive (better contrast) or transflective (sunlight readable and battery powered) types. Orient LCD glass panels include 1; 2; 2.1/2; 3; 3.1/2; 3.3/4; 4; 4.1/2; 5; 6; 8; and 24 digits. Orient LCD glass panels also include 7 , 14 or 16 segments to display digits and alphanumeric letters. The temperature ranges are from room temperature to wide temperature applications. Orient LCD glass panels can have metal pin or zebra connections.

ARDUINO LCD Displays: Orient Display creates special character LCD displays with SPI interface which is easily hooked up with Arduino, which has been widely acceptable in the electronic design. The series includes 8 x 2 characters, 16 x 2 characters, 20 x 2 characters and 20 x 4 characters with either yellow green STN with yellow green LED backlight or blue STN with white LED backlight.

If you have any questions about Orient Display TFT LCD displays or if you can’t find a suitable product on our website. Please feel free to contact our engineers for details.

LCD character modules are “characteristically” simple display devices known for their very low power consumption, low cost and long-term reliability. They are designed to display alpha-numeric characters in preset patterns and do not have much. In most cases, they are small displays with only 8 or 16 or 32 characters, utilized for status reports and simple communication. It is the most popular display for hobbyist because of its ease of operation.

Orient Display offers many standard sizes including (characters x lines) 8×1, 8×2, 16×2, 16×4 , 20×2, 20×4 , 24×4, 40×4, and many more. Orient Display’s character LCD displays cover small LCD character display modules for tiny devices to large character LCD displays for medical equipments.

Orient Display character LCD modules use industrial standard Hitachi HD44780 controller or compatible controllers such as Sitronix ST7066U, Samsung S6A0069, so they can be quickly integrated into a new product or used as a replacement in your existing products.

The LCD panel technologies include TN, STN, FSTN, FFSTN or VA (Vertical Alignment) types and also with positive mode and negative mode and options of reflective, transflective or transmissive polarizers. There are different LED backlights available in various colors including yellow-green, white, red, blue, green, amber, and RGB LEDs as well as no backlight option.

The viewing angles for these character LCD displays are available with 6:00, 12:00, 3:00, and 9:00. Orient Display offers various IC options of character fonts including English/Japanese, western European, eastern European, Scandinavian European, Cyrillic (Russian), and Hebrew/Arabic. These LCD character modules and LCD modules can be used on industrial and consumer’s applications including printers, microwaves, water machines, medical devices, car and home audio, white goods, game machines, toys, industrial meters, etc.

Please see our character LCD display list here. If you can’t find any in the list, please check with our engineers to search our factory database or have a custom-made option.

As a LCD display module manufacturer and technical developer in industrial display modules, Raystar has gained its reputation for Monochrome displays module products which are included Graphic LCD, Character LCD and Custom-made LCD display module types. The structures of display modules are in COB/COG types and its backlight are available in Blue, Green, White, Yellow-Green, Red and Amber color. Monochrome LCD display Module are included TN/STN/ FSTN/VATN, Positive or Negative, Transflective / Transmissive / Reflective standard. Check Raystar Website or email us for more product information.

This module is a 16x2 character monochrome lcd. The characteristics of this display module are high brightness, high contrast ratio, wide viewing angle and low power consumption. This product accords with RoHS environmental criterion.

Answer: For the segment type LCD module, if you need to modify the outline size or display content, we will start the drawing paper for your checking.