nvbdh+ lcd panel in stock

Vitkovets CNC Комплетующие системы ЧПУ Наш сайт: http://cnc.prom.ua/ Тел: +380 (096)-665-71-06 +380 (098)-821-25-90 E-mail: cncprom@ukr.net Manual of NVBDH+/NVBDL+ http://cnc.prom.ua/...

Novusun Manual of NVBDH+/NVBDL+ cnc.prom.ua/ Contects Chapter 1. Brief Introdution...........................- 1 - 1.1 Products brief introduction........................- 1 - 1.2 Specification feature..........................- 1 - 1.3 Product appearance and dimension......................- 2 - 1.4 Notice and Waring..........................- 7 - Chapter 2. Connection............................- 8 - 2.1 Connection interface definition.......................- 8 - 2.2 NVBDH+ connection..........................- 9 -...

Novusun Manual of NVBDH+/NVBDL+ cnc.prom.ua 9) Speed testing port for user to inspect the real speed. 10) Internal over-voltage, over-current and stalling inspection 11) Input signal TTL compatible 1.3 Product appearance and dimension NVBDH+ product appearance pls see picture 1-1,detached driver pls see picture 1-2,NVBDH with motor see picture 1-3.

Novusun Manual of NVBDH+/NVBDL+ cnc.prom.ua Figurei-4. NVBDL+ Product appearance B R U S H L E S S M OTOR DRIVER W ITHOUT HALL N V B D L + //Novusun # ¥ c n c r a & 1 R U | j^ S T O p j CW C CW PWM F G VSI GNO r r r I r I...

Figure1-6. NVBDL+ brushless spindle motor as one set NVBDH+ and NVBDL+ mechanical dimensions are the same,here we take NVBDL+ as example.Product outline dimension is 118*76*33mm,as picture 1-7 shows.The two installing hole size is 110mm,see picture 1-8.

Novusun Manual of NVBDH+/NVBDL+ cnc.prom.ua 1.4 Notice and Waring Prohibit staying in the rain, it will cause short-circuit.. Pls use proper voltage power supply and motor. ▲ Note the power supply connection. Prohibit reverse connection of power supply and Hall.

Hall version NVBDH+: NVBDH+panel button speed control+ Panel start/stop control NVBDH+panel button speed control+ Panel start/stop control connection pls see picture 2-1.In this mode,if the control system need to collect motor speed data,then FG x GND port on NVBDH+ need to connect with signal collection port x GND port on controller.Cable thick...

BLACK HALL GND Figure2-1. NVBDH+panel button speed control+ Panel start/stop control 2^ NVBDH+ external analog speed control+external interface start/stop control NVBDH+ external analog speed control+external interface start/stop control connection pls see picture 2-2.The VSI is analog speed control interface,connect VSI to controller analog...

Novusun Manual of NVBDH+/NVBDL+ cnc.prom.ua Figure2-2. NVBDH+ external PWM speed control+external interface start/stop control 3 NVBDH+ external PWM speed control+external interface start/stop control NVBDH+ external PWM speed control+external interface start/stop control connection pls see the picture 2-3.In the mode of PWM control,connect PWM port on NVBDH+ to PWM output port on controller.

Novusun Manual of NVBDH+/NVBDL+ cnc.prom.ua Figure2-3. NVBDH+ external PWM speed control+external interface start/stop control 2.3 NVBDL+ connection NVBDL+ is the driver without Hall feedback,so the connection is easier than NVBDH+.Here we also introduce 3 control modes. К NVBDL+ panel button speed control+ Panel start/stop control NVBDL+ panel button speed control+ Panel start/stop control connection pls see the picture 2-4.

Novusun Manual of NVBDH+/NVBDL+ cnc.prom.ua Figure2-4. NVBDL+ panel button speed control+ Panel start/stop control connection 2^ NVBDL+ external analog speed control+external interface start/stop control NVBDL+ external analog speed control+external interface start/stop control connection see the picture 2-5. The VSI is analog speed control interface,connect VSI to controller analog output;CW and CCW control the motor rotating direction,CW and GND connect with motor CW.

Novusun Manual of NVBDH+/NVBDL+ cnc.prom.ua MAIN CONTROLLER Figure2-5. NVBDL+ external PWM speed control+external interface start/stop control 3^ NVBDL+ external PWM speed control+external interface start/stop control NVBDL+ external PWM speed control+external interface start/stop control connection pls see the picture 2-6.In the mode of PWM control,connect PWM port on NVBDL+ to PWM output port on controller.

parameter uppage or increase parameter increase parameter speed control Motor speed adjust,CW increase speed,CCW reduce potentiometer speed. display parameter or motor running speed. LED display Chart 3-1 Control panel definition 3.2 Parameter setting and LED display 1 • . When power on buzzer “DI--”rings one time,and LED lights up, driver standby.

4^ PWM effective voltage P3 M a r k P W M e ffe c tiv e v o lta g e d e fa u lt =1 r e m a r k v a lu e Low level is effective, output 0V High level is effective, output DC5V 5 Panel start motor direction P4 M a r k...