lcd module 4x10 price

Directed Electronics 4X10 Remote start system module + (1) 2-way LCD & (1) 1-Way 5-Button Replacement Remote Control Transmitter + Micro USB Charging Cable w/Antenna

Directed"s XpressStart 4X10 Series module lets you start your vehicle remotely by pressing the lock button on the key three times. The 4X10 incorporates a digital interface that communicates directly with your vehicle"s computer to bypass the normal security safeguards, so you can take control from a distance. You can pre-warm your car in the winter and pre-cool it in summer so it"ll be just right when you get in. Once you install this module, you"ll be able to start your car from as far away as your key will lock and unlock your doors.

This item does not come with installation instructions or wiring diagrams and requires professional installation. SmartStart services are ONLY Available in the United States and requires the smartstart module. Some Vehicles May require extra parts which are not included and sold separately. Bypass Module Interfaces need to be flashed to the specific vehicle and requires the bypass module itself. We recommend Professional Installation.

EA DOGS104-A Issue 11.2020 4x10/2x10 incl. SSD1803A for SPI, IC Dimension 36,0 x 27.5 x 4.6 mm TECHNICAL DATA * HIGH-CONTRAST LCD SUPERTWIST DISPLAY * OPTIONAL LED BACKLIGHT UNITS IN DIFFERENT COLORS * 4x10 CHARACTER WITH 2.6 mm SWITCHABLE TO 2X10 WITH 4.55 mm HEIGHT * SSD1803A CONTROLLER FOR SPI (2-/3-/4-WIRE) AND IC (2-WIRE) INTERFACE * SINGLE POWER SUPPLY +3.3V (typically 440A) * NO ADDITIONAL VOLTAGES REQUIRED * OPERATING TEMPERATURE RANGE -20 THROUGH +70C * LED BACKLIGHT 3 ..45mA 3.3V * NO MOUNTING REQUIRED, SIMPLY SOLDER INTO PCB * 3 DIFFERENT CHARACTER SETS (CYRILLIC, ENGLISH-JAPANESE AND EUROPEAN) INCLUDED IN THE SAME CONTROLLER * 2 VIEWING DIRECTION POSSIBLE (BOTTOM AND TOP VIEW) ORDERING CODE LCD MODULE 4x10 - 2.6 mm EA DOGS104x-A x: B = blue background transmissive W = white background transfelctive N = white background reflective LED-BACKLIGHT AMBER EA LED36X28-A LED-BACKLIGHT YELLOW-GREEN / RED EA LED36X28-GR LED-BACKLIGHT GREEN/ RED/ WHITE EA LED36X28-ERW ACCESSORIES USB-TESTBOARD FOR PC (WINDOWS) EA 9780-4USB SOCKET CONNECTOR 4,8mm HOCH (2 PCS REQUIRED) EA FL-10P available at 1 piece Switchable font heightEA DOGS04-A EA DOG SERIES With its EA DOG series, ELECTRONIC ASSEMBLY presents the worlds first display series which will run on 3.3 V systems without auxiliary power. Unlike normal LCD modules, you order the display and the corresponding backlight separately. This gives you a wealth of possible combinations. Designed for compact hand-held devices, this modern LCD range provides a number of real benefits with or without backlight: * extremely compact at 36,0x27,5 mm at the standard font size of 2.6 mm (4 x 10) * ultra-flat at 2.0 mm without backlight or 4.6 mm including LED backlight * SPI interface (2-/3-/4-wire) and IC (2-wire) * typical power consumption of only 440A in full operation (LED white backlight as of 3mA) * easy installation by simply soldering into the board * A whole range of design variants can be supplied as of single units * Changing background color LED BACKLIGHTS 3 different variants are available for Limiting resistor individual backlighting: amber, yellow- amber Forward Current EA LED36x28-A voltage max. green/red, green/red/white. 3,3 V 5V For the amber backlight, 2 separate LED Connected in parallel 2,1 V 60 mA 20 ohm 48 ohm paths are available, which can be switched Connected in series 4,2 V 30 mA - 27 ohm in parallel or in series to ideally match the system voltage. This means that all the Limiting resistor backlights can be run either at 3.3 V and green/red/white Forward Current higher voltages. EA LED36X28-ERW voltage max. 3,3 V 5 V Operation of the backlight requires an green path 3,0V 45 mA 7 ohm 45 ohm external series resistor for current limiting. red path 2,1 V 45 mA 27 ohm 65 ohm This can be calculated by R=U/I you will white path 3,0 V 30 mA 10 ohm 67 ohm find the values in the table. To improve life time it is recommanded to use a current source only. Limiting resistor yellowgreen/red Forward Current EA LED36x28-GR voltage max. The operating life of the yellow/green, red 3,3 V 5V and amber backlights is 100,000 hours and red path (AGR/CR) 2,1 V 45 mA 27 ohm 65 ohm that of the white backlight is a bit shorter. yellowgreen path (AGR/CG) 2,1 V 60 mA 20 ohm 48 ohm Important: Never operate the backlight directly on a 5 V/3.3V supply, as this can immediately destroy the LEDs INSTALLATION First, the display and the corresponding backlight are clipped together. The complete unit is then inserted into a PCB and soldered. Note that the 4 pins for the backlight must also be soldered from the top with less tin. Important: There are one or two protective films on the display (top and/or rear side) and one on each backlight. Those have to be removed during or after production. Page 2 Printing and typographical errors reserved. ELECTRONIC ASSEMBLY reserves the right to change specifications without prior notice.