elecrow rpa05010r hdmi 5-inch 800x480 tft lcd quotation

Now we have this 5-inch TFT display with a touch screen that can provide a high-resolution picture and a large viewing screen for your Raspberry Pi. The display supports any revision of Raspberry Pi and works perfectly for Raspberry Pi B+/ 2B/ 3B. It is the low power consumption for the backlight of the screen. The high 800 x 480 resolution can give you a full-color experience, the touch screen allows users to play easily.

This is a 5 inch mini HDMI resistive touch screen with 800*480 resolutionfor Raspberry Pi, the high resolution will provide a large viewing screen for Raspberry Pi. Compared with another type of 5-inch display for Raspberry Pi, the backlight of this 5-inch display can be controlled by Raspberry Pi GPIO pin 11. Generally, the backlight is on, then input a high level, and it will turn off. The Pin 11 control a MOS tube switch on or off, the MOS tube switch will enable and disable the EN end of the backlight power IC. This design makes it convenient to control the backlight when we put the display into a product and safe power at the same time.

This 5 inch TFT Display with Touch Screen is a mini panel-mountable HDMI monitor. So small and simple, but you can use this display with any computer that has HDMI output, and the shape makes it easy to attach to a electronic product. Although the 800x480 common HDMI display is made for Raspberry Pi, we can use it other where not only for Raspberry Pi.

The resolution of the LCD display is 800 x 480, you can configure the resolution via software, and the maximum resolution it supports is 1920 x 1080. It is a USB capacitive touch screen and does not require a driver. It supports five touch control, besides that, the LCD screen comes with an OSD menu adjustment function. You can adjust the contrast, brightness, and switch button. There are 9 interfaces on the back of the screen, one earphone for audio output; two touches (USB connector), for power supply and touch output; one display, an HDMI interface, for connecting the motherboard and LCD display. One power, it can control the backlight to turn on and turn off to save power. One return, it’s only useful in the OSD menu. One right/down, backlight shortcut key. One left/up, backlight shortcut key. A menu, it’s useful in the OSD setting menu, open the OSD/ select key.

Note: From 21st Oct 2019 onwards, a micro HDMI to standard HDMI is added in the packing list for the Raspberry Pi 4 Model B board. Making this 5 inch TFT Touch Screen compatible with Raspberry Pi 4 Model B 1GB, 2GB, 4GB.

This 5" TFT touch screen display with resolution of 800 x 480 is perfect for your Raspberry Pi 2 or 3. The back of the LCD is designed to be stacked on your Raspberry Pi board nicely. It even comes with a socket for HDMI for perfect and nicely fit your Rpi right under the LCD.

Note:The TFT display will draw quite some power from the 5V, default from Raspberry Pi (via 40-pin GPIO) if it is stacked on Raspberry Pi. So do use a high current adapter to power your Raspberry Pi.2.5A or 3.0A adapter would be good enough. Or you can check out the USB-C 5V 3A power adapter (White or Black) for Raspberry Pi 4B.